Need assistance installing MindStorm NXT module on my desktop with Win XP and also my laptop which runs Win 7, software does not want to install?

I need assistance to install LabView MindStorm NXT module in a Desktop system with Win XP and a Laptop with Win7. Both are 32 bit with all service packs applied. I purchased the academic version from a company called On-The-Hub.
Attempted to install but seems to reject my serial number?

Hi Rob,
Thats really strange because the NXT Module 2010 and the NXT Module 2011 are free and don't require serial numbers. Where did you obtain the installer? The core LabVIEW installer requires a serial number but if you already have that installed, the NXT Module is just a free addon. Here are the links to the module for LabVIEW 2010 & 2011
NXT Module 2011 : http://joule.ni.com/nidu/cds/view/p/id/2637/lang/en
NXT Module 2010: http://joule.ni.com/nidu/cds/view/p/id/2551/lang/en

Similar Messages

Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

I tried to install Flash Player 10 ActiveX but no luck
operating system VISTA 32bit
web browser and version IE8 32bit
Flash Player version WIN 10,1,82,76
is there anything in the security needs to be adjusted?
It was running perfect before I do the latest upgrade
It is running perfect on Fire Fox
It is just not working on IE8
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
http://kb2.adobe.com/cps/191/tn_19166.html
Hope this is helpful for you.
Thanks,
eidnolb

AMD High Definition Graphics Driver_TR does not want to install

I have a HP Pavilion 17 Notebook, Product number: G4X63UA#ABA, with windows 8.1 64 bit that has a AMD Radeon HD 7640G Graphics card,
but the graphics driver update from HP (mentioned in the subject line) does not want to install?

Hello @Ebert1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to install the AMD graphics driver on your notebook computer, and I would be happy to assist you in this matter!
To successfully install any missing software on your computer, I recommend installing the original software and hardware drivers that came with your notebook. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), as well as Using HP Support Assistant (Windows 8) to update your drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

Luis Sequeira1 wrote:
I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
Hey Luis. I not only remember…I still have mine (OS 9)! Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
Russ

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install.

Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install. Is in install mode screen and Extension Manager does not install. Help me!

What you said confused me. You uninstalled it. You does not want to install. Why do you install it again? Could you explain it clearly?

Hp scanner software does not open after installing 10.4.8

Your help, please...since installing OS 10.4.8 my HP scanner software (5370c) does not open. It appears to begin opening and the icon appears briefly on the Dock, but does not stay there.
Also, the keyboard does not light up in low-light conditions as it did previously. Yes, I have the box checked in the keyboard section of system preferences. (It is a brand new keyboard, recently replaced, but the lighting worked under OS 10.3.9.
Any ideas?
Thanks for your help,
Dean

yes, it seems to almost complete the installation and then tells me that I do not have the right permissions.

Adobe acrobat x pro does not want to install on win7, 64bit

Is there anyone that can help me? I never managed to sucessfull install Adobe Acrobat x pro on my windows7, 64bit system - it just won't work

Hi Nancynator,
Please specify the error message during install.
Regards,
Romit Sinha

9i patch does not want to install

Hi,
I installed patch 9.2.0.7.1 patch on 6 servers without problem. When I got to the PRD system, it fails with 'Applications running...stop before continuing'. No service or application is listed in the pop-up box.
I shut down both App servers. Restarted DB server. Stopped the necessary services and just about all other services as well. STILL I get the pop-up telling me there are applications running.
What could be the cause?

on Windows 2003:
open a command box and run following commands:
<i>tasklist /m | findstr -i oci
tasklist /m | findstr -i ora</i>
if one of them is reporting files, rerun the command
tasklist /m > opendlls.txt
edit opendlls.txt and search for the DLL still loaded.
you will find the process name and the process ID.
If the process is started as a service you might find
tasklist /svc
helpfull which enables to you connect the process to a servicename.
in most cases the Distributed Transaction Coordinator (Service) is the problem.
regards
Peter

Oracle 817 does not want to install on RH Linux (ORA-03113)

I am trying to install Oracle 817 on RH Linux with kernel
2.4.17. I have modified various recommended parameters
as described in the doc and recompiled the kernel.
But each time I try to create a database, I would be getting this error:
ORA-03113: end-of-file on communication channel
Please help!! My system has 512 MB of ram and 1GB of swap.
It is a Pentium III about 700 MHZ.
thanks
--Vincent

After Forms 6i it is only possible to run the Forms web based. Inside the the Developer Suite you can find an OC4J which allows you to run the Forms locally on the Development PC.
There are setting in the formsweb.cfg which allows you to do some configuration. For instance the look and feel which is by default the green color. The size of your window which makes your current window smaller than your Form.
At your last question. Do you want the other user to make use of your Forms or make use of your database. If you want him to make use of your Forms, the other user could call the locally installed OC4J with the http-address. If you want the user to make use of the database, the other pc should have a installed client software or make use a tool like SQL Developer to connect over JDBC.

Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Provider client software has not been properly installed on this server

Hi All,
I am in a process of setting up the DR for the SAP R/3 4.7 system, which is on Windows and SQL 2000 SP3.
While installing the SPA on the DR Server, i am facing the below attached problem in the DB Instance installation. the CI Installation goes through fine. but it stop in the Database Load section. with the screen showing Running 3 and waiting 0.
Details:
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: START OF LOG: 20080220124003
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\GRP\SYS\exe\run/R3load.exe -ctf I I:\EXPORT6/DATA/SAPAPPL0.STR I:\EXPORT6/DB/DDLMSS.TPL C:\SAPinst MSSQL SAPINST/SAPAPPL0.TSK MSS -l C:\SAPinst MSSQL SAPINST/SAPAPPL0.log
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: END OF LOG: 20080220124003
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: START OF LOG: 20080220124039
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\GRP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL SAPINST/SAPAPPL0.cmd -l C:\SAPinst MSSQL SAPINST/SAPAPPL0.log -loadprocedure fast
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: failed to establish conn. 0
(DB) ERROR: db_connect rc = 256
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: OpenOledbConnection : CoCreateInstance failed. rc: REGDB_E_CLASSNOTREG.
DbSl Trace: OpenOledbConnection : Provider client software has not been properly installed on this server.
DbSl Trace: failed to establish conn. 0
(DB) ERROR: DbSlErrorMsg rc = 29
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\GRP\SYS\exe\run/R3load.exe: END OF LOG: 20080220124040
The same error come in a lot of other scripts of DB Load.
I have installed the SQL Server 2000 SP3 with Hot fix 929.
Could some one help me to get the same fixed
Thanks a lot in advance.
Best Regards
Mahendra K
+91 9867183370

I have this problem too on an ASUS windows 8.1 PC.
Since installing itunes 11.1.5
Problem seems to be that the AMDS Apple Mobile Device Support does not install.
I also tried all options on this forum....
Who can help???
Thnx
Oscar

Mindstorm nxt module programing guide trouble

hi there,
I have some trouble with the 'Labview mindstorms NXT Module programming guide'.
I develop an application on labview 2009 and i want to acces some properties like 'Overload and ActualSpeed' but i don't found anywhere in this guide how to acces to those propertie. btw i try to use some module in the toolkit like 'set output state' and 'get output state' in the NXT Direct I/O section but those properties are unable to found. When i open the vi called by those module, i see they called vi named 'Fantom'. All those vi are in driver folder. i try to search some help about this drivers but i find nothing.
If anyone can help me ;p
thanks

I Romain,
thank to
try helping me.
I'll be
more precise this time.
The guide I
use is this one: http://www.ni.com/pdf/manuals/372574c.pdf
The
properties i want to access is in use with the NXTInput and NXTOutput refnum.
I find how
to access to this refnum and how to see the propertie i want with the propertie
node in the Application Control palette.
But now i
don't know how to use this refnum and the propertie node with the other objet
of the toolkit
To be more
precise i want to create an object like those existant in NXT Direct I/O
palette, so i don't know how to create an ‘NXT Object’ or to scan, detect The
NXT Brick and create an nxt object like they do the object ‘FIND NXT’ and ‘CREATE
NXT OBJECT’ to implement the flow.
If i can do that, i'll really can create an object I can use
with the toolkit.
If you have
a solution or an exemple for me it’ll be fine because I find nothing.
(I hope you
understood me, cause I’m French and I think my English is not perfect )
Regards

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

HT5642 I need to update iOS 6.1.3 on my iPad2 to 6.1.6, due to security issue. Why is no update available? I do NOT want to install iOS 7, due to memory limitations.

I need to update iOS 6.1.3 on my iPad2 to 6.1.6, due to security issue. Why is no update available? I do NOT want to install iOS 7, due to memory limitations.

Any upgrade will be to the most recent, compatible version, in this case 7.0.6.

Need assistance installing MindStorm NXT module on my desktop with Win XP and also my laptop which runs Win 7, software does not want to install?

Similar Messages

Maybe you are looking for