Need exit/badi to carry out new pricing(b) for SO coming from CRM...

Hello Experts,
We are transferring internet sales orders from CRM to R/3. Now, what I need to do is
to trigger the 'carry out new pricing' for all the line items. Just like when we click
the update button in the conditions tab and click on the 'carry new pricing' option even though
user only displays the sales order in R/3.
Hope you can help me guys. Thank you and take care!

No Answer...

Similar Messages

  • Carry out new pricing when key in access field is changed

    Need automatic update to 'carry out new pricing' when field that is part of key combination is changed.
    The system recognized the change when viewed in analysis, but amount is not updated unless "Update" button is manually pressed.

    hi,
    you sales orders which are already created then you changed the access key. For these order unless you run an update pricing they cannot be updated. Now for the new sales orders which are going to be created if the new key combination matches the sales order criteria then it gets picked up automatically and you dont to do anything.
    as we understand from access sequence setup, we do it frm the most specific to the most general ( while setting up the condition tables ie key combinations), So when a condtion record is found whether new key combination or old if its the relevant one and a condition is found for it, it gets picked up automatically.
    regards
    sadhu kishore

  • User-exit for  carry out new pricing while sales order save automatically

    Hi all,
    I need to carry out new pricing while sales order save automatically. Please any one help me to finding proper user-exit to achieve my requirement.
    Thanking You.
    Moderator message: please search for available information.
    Edited by: Thomas Zloch on Jan 11, 2012 12:53 PM

    Pl help.

  • Do not carry out new pricing when plant change in sales order

    Hi,
    I have one z field in additional data tab in sales order. This field store the original plant if anyone has changed plant in Sales order. My requirement is to trigger the pricing in sales order with this old plant. I am not getting any exit for this.
    Suggest me the solution.

    Hi
    In the comments for the subroutine, it says:
    *       Parameter new_pricing controls the new pricing in the calling *
    *       form. It can be filled according the the allowed values       *
    *       of domain KNPRS (Pricing type), for example:                  *
    *       ' ' = no new pricing                                          *
    *       B   = Carry out new pricing                                   *
    *       C   = Copy manual pricing elements and redetermine the others
    So, you must write:
    If VBAP_WERKS NE *VBAP_WERKS.
      new_pricing = 'B'.
    Endif.
    Regards
    Eduardo
    Edited by: E_Hinojosa on Aug 25, 2011 8:21 AM

  • Carry out new pricing at invoice

    Hi all,
    My requirement is to carry out pricing at invoice and not copy from sales order.
    For this, I goto tcode VTFL and opened copy control for LF to F1. I changed pricing type from C to B but still system is copying price from order and not carry out new pricing automatically at the time of invoice creation.
    please update that what needs to be done.
    Many Thanks.,
    AI.

    I changed pricing type from C to B
    First please dont post the same question related to an issue in multiple times.
    Coming to the issue, you have to test this by creating a new sale order.  Existing orders will not change once you change the copy controls.  It will have impact only on the newly created documents.
    Last but not least, as for as possible, continue your queries in the other thread and close this one.
    thanks
    G. Lakshmipathi

  • Carry out new pricing for SO

    Hi Guys,
    Is there any function module/BAPI to carry out new pricing for sales order.
    Somehow my BDC for VA02 is not working and
    my bdc does only carrying out new pricing for that order.
    This I want to replace with BAPI.
    Could you please help me in this regard
    Prashant

    Hi,
    An alternative solution is to use the BAPI to make a general CHANGE to the sales order and let the user exit take care of the repricing.
    Calling program :
      ls_order_header_inx-updateflag = 'U'.
        ls_logic_switch-pricing = 'C'.
        ld_bapi_reprice = 'C'.
    Memory ID is read in MV45AFZB, form USEREXIT_NEW_PRICING_VBKD
        EXPORT ld_bapi_reprice TO MEMORY ID 'Z_BAPI_REPRICE'.
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
             EXPORTING
                  salesdocument    = p_vbeln
                  order_header_inx = ls_order_header_inx
                  logic_switch     = ls_logic_switch
             TABLES
                  return           = gt_return.
        FREE MEMORY ID 'Z_BAPI_REPRICE'.
        READ TABLE gt_return INTO ls_return
        WITH KEY type = 'E'.
        IF sy-subrc NE 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
               EXPORTING
                    wait = ''. " No wait between orders
        ELSE.
          ls_error-vbeln = p_vbeln.
          ls_error-text =  ls_return-message.
          APPEND  ls_error TO gt_error.
        ENDIF.
    MV45AFZB, USEREXIT_NEW_PRICING_VBKD :
    DATA : ld_bapi_reprice TYPE knprs.
    Memory ID is exported from program ZPSF_01_TOOLKIT_F01
      IMPORT ld_bapi_reprice FROM MEMORY ID 'Z_BAPI_REPRICE'.
      IF NOT ld_bapi_reprice IS INITIAL
      AND sy-subrc IS INITIAL.
        new_pricing = ld_bapi_reprice.
      ENDIF.

  • How to Carry out New Pricing in Sales Order userexit

    Hello,
    In userexit save_document_prepare of program MV45AFZZ, I'm adding an entry in XKOMV for a header pricing condition ZD01.  After saving, if I go back into the order and go directly into the line item conditions, the ZD01 does not exists at the item level.  If I navigate the the header conditions and then go back to the items, ZD01 appears as it should.  I believe what is happening is that the header condition is not being distributed to the line items unless New Pricing is carried out.  If I manually enter the ZD01 condiiton instead of relying on the userexit code, everything works fine.  The header condition is properly distributed to the line items.  Therefore, I believe the configuration is correct.  My question is, "How can I programatically trigger New Pricing from a sales order userexit".  Is this possible in SAVE_DOCUMENT_PREPARE or do I need to do it somewhere else.".
    Thank you,

    this problem has been resolved.  The problem was that I was appending the header condition to XKOMV instead of inserting the header condition as the first line in the table.  SAP will carry out the new pricing if the header condition is on the first line.

  • Carry out new pricing by changing item category

    Hi All,
    Is it possible to carry out a new pricing depending on item category. The requirement is when i change the item category it should trigger new pricing procedure. Like example if it is tann one pricing procedure and if it change to another category like ztann it should trigger new pricing procedure .
    I know that  pricing procedure not defined on item category. I tried with the exit form userexit_new_pricing_vbap changing new_pricing. But i dont know what to write in that. I am technical guy . Please share me your idea if any one did this before.
    Regards,
    Madhu.
    Edited by: madhurao123 on Mar 10, 2011 5:54 PM

    Dear Lakshmipathy,
    I have tried the option you have suggested but was unable t o make any progress. I have done the following steps:
    In VKOA I have done the revenue account determination based on Acct Assign Grp: Customer, Acct. Assign Grp: Material, and Item Category. Despite this the correct G/L accounts are not being picked up. Can you please suggest where I may be going wrong.
    The scenario is as follows for all Item categories except ZTNN::
    If Customer and Material are taxable @ 5%VAT then pick G/L1
    If Customer and Material are taxable @ 15% VAT then pick G/L 2
    If Customer and Material are taxable @ 2% CST then pick G/L 3
    If Customer and Material are taxable @ 5% CST then pick G/L 4
    If Customer and Material are taxable @ 15% CST then pick G/L 5
    For Item Category ZTNN:
    If Customer and Material are taxable @ 5%VAT then pick G/L6
    If Customer and Material are taxable @ 15% VAT then pick G/L 6
    If Customer and Material are taxable @ 2% CST then pick G/L 6
    If Customer and Material are taxable @ 5% CST then pick G/L 6
    If Customer and Material are taxable @ 15% CST then pick G/L 6
    Your suggestions would be greatly appreciated.
    Thanks and Regards,
    Rohan Gudavalli

  • Carry out new pricing not working in Me23n

    Dear Experts,
    I am trying to carryout new pricing in purchase order i.e iam going into Item conditions of PO and hit update button on the botton of the conditions tab and select B as the pricing type . The value changes to the new rice and then I save the PO.
    After hitting save the values remain unchanged .
    Please help on this .

    hi,
    you sales orders which are already created then you changed the access key. For these order unless you run an update pricing they cannot be updated. Now for the new sales orders which are going to be created if the new key combination matches the sales order criteria then it gets picked up automatically and you dont to do anything.
    as we understand from access sequence setup, we do it frm the most specific to the most general ( while setting up the condition tables ie key combinations), So when a condtion record is found whether new key combination or old if its the relevant one and a condition is found for it, it gets picked up automatically.
    regards
    sadhu kishore

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • How can we create new pricing requirement for a condition type

    Hi All,
    I am in urgent need of creating new pricing requirements for a condition type.
    Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
    In short if you can let me know how does pricing get impacted by the condition types.
    Thanks
    Mark

    Hi!
    The common transactions for condition mantaining are VK11, VK12, VK13.
    In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
    Is this what you want?
    Regards
    Tamá

  • I need to install windows on my new Macbook pro for running my flight simulator software

    Hi!
    I'm new to the Mac world and I need to install windows on my new Macbook pro for running my flight simulator software which only runs on windows. I would like to purchase and download the windows 8.1 rather than buying the CD.
    When i go to the microsoft store and click windows 8.1 it says it is only for who has windows xp or vista...
    can you tell me where and how can i purchase the full installation 8.1 for download?
    i will keep the ISO file on my flash drive.
    Thanks!
    <Re-Titled By Host>

    it's likely an upgrade you are looking for and not a full install of windows
    http://www.techrepublic.com/blog/windows-and-office/get-the-iso-you-need-to-crea te-your-own-windows-81-dvd/
    if you get it as an iso file then you need to burn the iso file to a optical disc to install it

  • I need to reinstall PSE9 in a new MAC. For my surprise, this MAC doesn't have CD drive. So, I need t

    I need to reinstall PSE9 in a new MAC. For my surprise, this MAC doesn't have CD drive. So, I need the link to download the PSE9 for MAC.

    if you follow all 7 steps you can directly download a trial here:  http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    and activate with your serial number.
    if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

  • How to activate new pricing procedure for old Pur Document

    Dear all,
    we have added some condition type  in our pricing procedure,every thing is ok but my question is this new condition added in pricing procedure are not reflecting in previously created purchasing document/po, how can we do it
    I kw that if we create new po all condition will be reflec as per in pricing procedure
    shakir

    Hi
    Assign Document pricing procedure Z in VOV8 for CR document type , Now do the pricing procedure determination in OVKK with sales area + Cupp+Dupp=new pricing procedure
    Example :
    In OVKK, determine with 1000 + 10+ 10 + A+ 1 = standard pricing procedure for normal sales
    For credit memo in OVKK determine with 1000 + 10+ 10 + Z+ 1 = New pricing procedure for Credit memo
    Then when you create a sales order (with document type CR ) with reference to billing document then the new pricing procedure will get copied.
    Regards
    Srinath

  • Carrying out physical inventory count for Consignment stock.

    Hello,
    Can you please tell me what are the steps for carrying out physical inventory count for Consignment stock provided by vendor?
    Sincerely,
    Ketan

    HI
    IN MI01,, select the special stock indicater,, then PI will be created for consignment stock also.
    regards,
    sudhakar

Maybe you are looking for