Need Feasiblity Analysis

Hi,
I have a Scenario SAP R/3 - XI -JDBC. i am using RFC as Sender Adpater and Triggering the RFC in SAP R/3 System. 
But my client want to Trigger RFC in SAP XI ,     RFC need not to be triggered in SAP R/3.
SAP XI should initiate the call...
i need some ideas...
Please Kindly let me , this is Feasible or not
Regards,
R.Ragu

You can opt adapter scheduling if you use  XI sp >=19.
Adapter Scheduling - Hail SP 19
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
Scheduling messages in SAP XI
/people/alexander.bundschuh/blog/2006/01/04/scheduling-messages-in-sap-xi
Scheduling File Adapter u2013 Part I
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d458a870-0601-0010-caab-b99c79741964
Scheduling the file adapter

Similar Messages

  • Need to analyse my PROD system completely.

    Hi,
    We have following setup in our system.
    1) 2 node RAC.
    2) ASM storage.
    3) RMAN backup has been used.
    4) PCP has been implemented.
    5) Dataguard has been implemented.
    6) 2node EBS has been implemented with h/w load balancer.
    7) OS is AIX 6L.
    8) DB is 11GR2.
    9) EBS is 12.1.3.
    Recently system gone live and we have been facing some issues very frequently. and client asked me to perform complete health check of the entire system. This is the first time in my career i am doing health check. Can any body suggest me which are the components i need to focus and any reference documents on the same.
    I hope i have given enough information to reply to my question.
    Regards
    DBA.

    Hi DBA,
    before doing that, understand the environment, there is many aspects comes to picture when you check it,
    Check this information, it might help to you.
    1) 2 node RAC.
    Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
    2) ASM storage.
    Sharing The Application Tier File System in Oracle E-Business Suite Release 12 [ID 384248.1]
    3) RMAN backup has been used.
    need to test, every month after restore database from PROD backup copy.
    4) PCP has been implemented.
    check if pcp is working fine.
    How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
    Concurrent Manager Setup and Configuration Requirements in an 11i RAC Environment [ID 241370.1]
    Concurrent Managers Will Only Start on One Node in PCP/RAC Environment [ID 264296.1]
    See Note 240818.1 regarding Transaction Manager communication and setup requirements for RAC
    Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
    Note: 271090.1 - Parallel Concurrent Processing Failover/Failback Expectations
    Note: 388495.1 - How to Set Up Parallel Concurrent Processing (PCP) in Apps 11i?
    Note: 752604.1 - Failover Does Not Occur To The Secondary Node While The Primary Node Is Up
    Note: 743716.1 - How to Setup and Test Failover of PCP on Non-RAC Environments
    How to Activate Parallel Concurrent Processing - More Facts [ID 602899.1]
    On A Multi-node / RAC Installation Is $APPLCSF And $APPLPTMP An NSF Mount Point [ID 371896.1]
    Failover Does Not Occur To The Secondary Node While The Primary Node Is Up [ID 752604.1]
    Note 148262.1 "Concurrent Requests Fail with FDPSTP failed due to ORA-20100: File o0002712.tmp creation for FND_FILE
    Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? [ID 456540.1]
    5) Dataguard has been implemented.
    do a Synchronization of primary and standby database due to log transfer gap.
    Follow metalink note id : Note:150214.1
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96653/scenarios.htm
    Master Note for Data Guard [ID 1101938.1]
    Changing Primary Database Character Set without Recreating Data Guard Physical Standbys [ID 1124165.1]
    Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
    Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]
    How to configure Client Failover after Data Guard Switchover or Failover [ID 316740.1]

  • NEED DATA ANALYSIS TOOL .. EXCEL MICROSOFT OFFICE!!

    I Have a macbook which i ordered online from apple with the microsoft office software pack. The computer was set with everything installed and no Cd-rom.. Does Anyone Know How I Can Access The Data Analysis Tool for excel??

    Welcome to Apple Support Communities.
    This existing thread provides the link to the Microsoft solution page and two other alternatives.
    https://discussions.apple.com/message/15332203#15332203
    http://mac2.microsoft.com/help/office/14/en-us/excel/item/71e42c24-7152-437d-ac3 e-a741b1a60d88

  • Need feasible one from Abap Proxies or RFC Adapters

    Hi Experts,
    I have two ways to do my scenario, either I can go for RFC adapter or ABAP server proxies. Out of these two I can't judge which one is good at performance.But I have a favour on ABAP proxies. Please comment on this and it would be more helpful if u provide related document on this.
    Thanks

    Hi.
    As far as i have read and known, ABAP Proxies are best for performance.. Lets see what the other gurus say too .
    Thanks
    Sanjo

  • How to build a Analysis report in OBIEE 11g

    Hi All,
    I have a query regarding 'How to' to build an analysis report in OBIEE 11g.
    The data model is a financial data model, where information such as Actual, Plan, Forecast, What - if etc for current AND prior year need to be displayed in a dashboard.
    I created two analysis reports one for current year Rep1 and second for prior year Rep2 each with filter criteria as current year and prior year respectively based on years column. and then in the dashboard I created prompt based on scenario column (radio button) for Actual, plan, Forecast, and wht if.
    I am able to show the current vs prior year data in the same dashboard for Actual or Plan or forecast or what if (depending on data availability in the database).
    I want to achieve the same information in a single analysis report instead of two separate analysis reports. I do not want to create separate physical report for current and prior year data.
    I need one analysis report which I can use in dashboard and depending on selection for scenario (actual , plan, forecast or wht if) I want to show the current AND prior year data the way I achieved in with two seperate reports embedded in their respective sections as explained above.
    Does any one have idea how to achive this by building single analysis report?
    If you need any more clarificaiton or have any queries, please let me know.
    Thanks and Regards
    Santosh

    As per I understand your requirement,
    In your Dashboard create a Presentation variable which receives the value of year you select.
    Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
    Create a filter on Year column and convert it into SQL. Put the condition as:
    "Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
    You will get the result for selected year and the previous year.
    Hope it helps..
    Regards,
    A.K.

  • Need Help about Certificate based Authentication

    Hi friends..
    Currently, i'm trying to develop an applet that using Certificate Based Authentication..
    i have looked at this thread : http://forums.sun.com/thread.jspa?threadID=5433603
    these is what Safarmer says about steps to generate CSR :
    0. Generate key pair on the card.
    1. Get public key from card
    2. Build CSR off card from the details you have, the CSR will not have a signature
    3. Decide on the signature you want to use (the rest assumes SHA1 with RSA Encryption)
    4. Generate a SHA1 hash of the CSR (without the signature section)
    5. Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
    6. Send DigestInfo to the card
    7. On the card, the matching private key to encrypt the DigestInfo
    8. Return the encrypted digest info to the host
    9. Insert the response into the CSR as the signature
    Sorry, i'm a little bit confused about those steps.. (Sorry i'm pretty new in X509Certificate)..
    on step 4,
    Generate a SHA1 hash of the CSR (without the signature section)
    Does it mean we have to "build" CSR looks like :
    Data:
    Version: 0 (0x0)
    Subject: C=US, ST=California, L=West Hollywood, O=ITDivision, OU=Mysys, CN=leonardo.office/[email protected]
    Subject Public Key Info:
    Public Key Algorithm: rsaEncryption
    RSA Public Key: (1024 bit)
    Modulus (1024 bit):
    00:be:a0:5e:35:99:1c:d3:49:ba:fb:2f:87:6f:d8:
    ed:e4:61:f2:ae:6e:87:d0:e2:c0:fd:c1:0f:ed:d7:
    84:04:b5:c5:66:cd:6b:f0:27:a2:cb:aa:3b:d7:ad:
    fa:f4:72:10:08:84:88:19:24:d0:b0:0b:a0:71:6d:
    23:5e:53:4f:1b:43:07:98:4d:d1:ea:00:d1:e2:29:
    ea:be:a9:c5:3e:78:f3:5e:30:1b:6c:98:16:60:ba:
    61:57:63:5e:6a:b5:99:17:1c:ae:a2:86:fb:5b:8b:
    24:46:59:3f:e9:84:06:e2:91:b9:2f:9f:98:04:01:
    db:38:2f:5b:1f:85:c1:20:eb
    Exponent: 65537 (0x10001)
    Attributes:
    a0:00
    on step 5, Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
    How DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) looks like?
    And what is the DigestInfo Contains, and what is TAG for DigestInfo?..
    Please help me regarding this..
    Thanks in advance..
    Leonardo Carreira

    Hi,
    Leonardo Carreira wrote:
    Sorry, Encode the Public Key is handled by On Card Application or Off Card Application?..
    I think its' easier to encode the public key by Off Card app..
    Could you guide me how to achieve this?, i think Bouncy Castle can do this, but sorry, i don't know how to write code for it.. :( All you need to do is extract the modulus and exponent of the public key. These will be in a byte array (response from your card) that you can use to create a public key object in your host application. You can then use this key to create a CSR with bouncycastle.
    I have several some questions :
    1. Does Javacard provide API to deal with DER data format?JC 2.2.1 does not buy JC 2.2.2 does, however I believe this is an optional package though. You can implement this in your applet though.
    2. Regarding the Certificate Based Authentication, what stuff that need to be stored in the Applet?..
    - I think Applet must holds :
    - its Private Key,
    - its Public Key Modulus and its Public Key Exponent,
    - its Certificate,
    - Host Certificate
    i think this requires too much EEPROM to store only the key..This depends on what you mean by Certificate Based Authentication. If you want your applet to validate certificates it is sent against a certificate authority (CA) then you need the public keys for each trust point to the root CA. To use the certificate for the card, you need the certificate and corresponding private key. You would not need to use the public key on the card so this is not needed. You definitely need the private key.
    Here is a rough estimate of data storage requirements for a 2048 bit key (this is done off the top of my head so is very rough):
    ~800 bytes for your private key
    ~260 bytes per public key for PKI hierarchy (CA trust points)
    ~1 - 4KB for the certificate. This depends on the amount of data you put in your cert
    3. What is the appropriate RSA key length that appropriate, because we have to take into account that the buffer, is only 255 bytes (assume i don't use Extended Length)..You should not base your key size on your card capabilities. You can always use APDU chaining to get more data onto the card. Your certificate is guaranteed to be larger than 256 bytes anyway. You should look at the NIST recommendations for key strengths. These are documented in NIST SP 800-57 [http://csrc.nist.gov/publications/PubsSPs.html]. You need to ensure that the key is strong enough to protect the data for a long enough period. If the key is a transport key, it needs to be stronger than the key you are transporting. As you can see there are a lot of factors to consider when deciding on key size. I would suggest you use the strongest key your card supports unless performance is not acceptable. Then you would need to analyse your key requirements to ensure your key is strong enough.
    Cheers,
    Shane

  • Analysing  Dimensions and assigning the char

    Hello Experts,
    I have the following requirement
    Selection:Companycode,Chart of Acconts,Fiscalyear,period
    O/P: G/L account,costcenter,amount in local currency,WBS element.
    I am using standard data source 0fi_gl_4 and stadard ODS 0figl_O02 and this does'nt have Standard cube (please tell me  if it has standard cube) as i could'nt find any.
    Could any one tell me what  dimensions i need to take  and which characteristics should be assigned under specific Dim  for the above requirement. As i don't have knowledge on FIGL i am unable to analyse the things.
    i have loaded the data till ODS and now gng for creating Z cube .please do the needful in analysing the dim and assigning the char,
    Points are assured..
    Regards
    Raju

    Suri,
    Please take a look at these (in business content) as step up example, most of your chars should be included.
    G/L (New): Balance Sheet and Profit and Loss  0FIGL_V10
    G/L (New): Balance Sheet and Profit and Loss Remote  0FIGL_V11
    General Ledger (New): Transaction Figures  0FIGL_C10
    General Ledger (New): Transaction Figures Remote  0FIGL_R10
    General Ledger: Financial Statements  0FIGL_VC1
    General Ledger: Transaction Figures  0FIGL_C01
    Regards, Patrick Rieken.

  • Indices configuration for XML document analysis (indexing time problems)

    Hi all,
    I'm currently developing a tool for XML Document analysis using XQuery. We have a need to analyse the content of a large CMS dump, so I am adding all documents to a berkeley DB xml to be able to run xqueries against it.
    In my last run I've been running to indexing speed problems, with single documents (typically 10-20 K in size) taking around 20 sec to be added to the database after 6000 documents (I've got around 20000 in total). The time needed for adding docs to the database drops with the number of documents.
    I suspect my index configuration to be the reason for this performance drop. Indeed, I've been very generous with indexes, as we have to analyse the data and don't know the structure in advance.
    Currently my index configuration includes:
    - 2 default indicess: edge-element-presence-none and edge-attribute-presence-none to be able to speed up every possible xquery to analyse data patterns: ex. collection()//table//p[contains(.,'help')]
    - 8 edge-attribute-substring-string indices on attributes we use often (id, value, name, ...)
    - 1 edge-element-substring-string index on the root element of the xml documents to be able to speed up document searches: ex. collection()//page[contains(.,'help')]
    So here my questions:
    - Are there any possible performance optimisations in Database config (not index config)? I only set the following:
    setTransactional(false);
    envConf.setCacheSize(1024*64);
    envConf.setCacheMax(1024*256);
    - How can I test various index configuration on the fly? Are there any db tools that allow to set/remove indexes?
    - Is my index config suspect? ;-)
    Greetings,
    Nils

    Hi Nils,
    The edge-element-substring-string index on the document element is almost certainly the cause of the slow document inserts - that's really not a good idea. Substring indexes are used to optimize "=", contains(), starts-with() and ends-with() when they are applied to the named element that has the substring index, so I don't think that index will do what you want it to.
    John

  • STATSPACK ANALYSIS TOOL

    hi guys,
    I need to analysis my statspack report of my own. Is there any free tool provided to analyse the report of my own.
    TIA,

    Hi,
    You could take a look at a great set of statspack and AWR analysis tools here http://www.statsviewer.netfirms.com/
    Cheers

  • Material ledger (ML) price analysis,  LACCS & CKMLLA return err. CKMLLA001

    Dear colleagues,
    We're experiencing problems analysing actual cost component split on material level after Material Ledger closing and need some help.
    OSS-note 872421 "Cost component split display for activity types" comes with two transactions for the purpose of analysing prices. But both transactions LACCS & CKMLLA don't work in our system, returning error message "Header not found: message № CKMLLA001" after trying to view ML prices (F5) or get Price report from LACCS as well as on Price report (F8) in CKMLLA.
    There's no further info available on message CKMLLA001. Did anyone here happened to get this message? What could it mean, what should we check?
    We need for analysing ML prices because the values in cost components split (according to CKM3, Itemization) differ greatly from what was expected on the basis of price analysis in Cost Center accounting (e.g. S_ALR_87013611).
    OSS-note note 880217 "Cost component split and price do not match" is implemented in our system, as well as recommendations from the corresponding note 1090144 "Preventing rounding errors in prices" are taken into account. For activity prices number of significant digits is set to 10, "no optimization" not selected. Though we don't get any warnings # 204: "Split and price of cost elem./activity type &1/&2 not consistent" during multi-level price determination, the totals are close to equal in ML costing compared to CC costing.

  • If A=B & B=C, need a query which says A=C

    Hi All,
    My requirement is something like: I have a table with two Columns:
    COLA COLB
    A B
    B C
    Now i need to analyse these records and understand that If A=B & B=C, then I need to insert the third record in the table like below:
    A C
    I was trying Hierarchical queries, but unable to reach the requirement. Any help is much appreciated.
    Thanks in Advance,
    Ram Mohan T

    Hi Ram,
    Sorry, I did not analyze the Question and Posted the previous result.
    Please Try, this it is done using the analytical function LEAD.
    SELECT col1, LEAD
    FROM (SELECT col1, ASCII (col2)
    - ASCII (LEAD (col1) OVER (ORDER BY col1)) val,
    LEAD (col2) OVER (ORDER BY col2) LEAD
    FROM test_val)
    WHERE val = 0;
    Thanks,
    Shankar
    Edited by: Shankar Viji on May 24, 2012 11:59 PM

  • Analyse a partitioned table with more than 50 million rows

    Hi,
    I have a partitioned table with more than 50 million rows. The last analyse is on 1/25/2007. Do I need to analyse him? (query runs on this table is very slow).
    If I need to analyse him, what is the best way? Use DBMS_STATS and schedule a job?
    Thanks

    A partitioned table has global statistics as well as partition (and subpartition if the table is subpartitioned) statistics. My guess is that you mean to say that the last time that global statistics were gathered was in 2007. Is that guess accurate? Are the partition-level statistics more recent?
    Do any of your queries actually use global statistics? Or would you expect that every query involving this table would specify one or more values for the partitioning key and thus force partition pruning to take place? If all your queries are doing partition pruning, global statistics are irrelevant, so it doesn't matter how old and out of date they are.
    Are you seeing any performance problems that are potentially attributable to stale statistics on this table? If you're not seeing any performance problems, leaving the statistics well enough alone may be the most prudent course of action. Gathering statistics would only have the potential to change query plans. And since the cost of a query plan regressing is orders of magnitude greater than the benefit of a different query performing faster (at least for most queries in most systems), the balance of risks would argue for leaving the stats alone if there is no problem you're trying to solve.
    If your system does actually use global statistics and there are performance problems that you believe are potentially attributable to stale global statistics and your partition level statistics are accurate, you can gather just global statistics on the table probably with a reasonably small sample size. Make sure, though, that you back up your existing statistics just in case a query plan goes south. Ideally, you'd also have a test environment with identical (or nearly identical) data volumes that you could use to verify that gathering statistics doesn't cause any problems.
    Justin

  • Analysis for Office - Security

    Hello,
    Our Basis team has deployed 'Analysis for Office' in our BO 4.1 system.
    However, I am unable to see this Application in CMC in teh List of all Applications..
    I need to configure Secuity for thsi Applciation. How do we do that if the applicaiton is not in CMC?
    Thanks.

    Hello tammy,
    I did check the Admin Guide for Analysis Office: http://help.sap.com/businessobject/product_guides/AMS13/en/13_aaoffice_admin_en.pdf
    From what I understand:
    - Analysis for Office software needs to be installed on the individual PC of the users who want to use it.
    - This will enable an option on the MS Excel/MS Word/etc. called Advanced Analysis
    - The user can directly connect to the BW system. The data available to the user depends on the Authorization that the user has in BW system.
    - There is no additional Security needed for "Analysis Office" itself.
    Please correct me if I have missed anything.

  • In BDC we need to read screen value of table control

    Dear All,
    I was doing a feasibility analysis. One BDC is there where we will have to insert records in table control based on some records of 1st column of table control already populated. We are unable to find a way for reading table control. The BDC is generating batch input session. Can you please suggest on this?
    Best wishes,
    Atanu

    Hi Atanu,
    with BDC, the only possibility is to do as Klaus suggested: you must replicate the SAP's logic in your program, you must know in advance how SAP fills this field. This is a very well known drawback of BDC. You may use the SQL trace to help you to know which tables are read. Ask functional people to help you.
    You may also use SAP GUI scripting, that's another technology (slower I think, and it can only work in dialog). It allows to do different actions between 2 screens. You must program it using OLE, or using external software (VBA for example).
    Sandra

  • How can Analyse/ Process the Video inputs in Labview to identify the objects travel in the video

    Hi ,
    I have the recorded video. I need to Analyse the Video to know about the particles or objects crossed in that video. Is that possible in Labview to do the Video Analysis or i need to use any Specific Software Tool kits. If anybody worked in that or have idea on this means please give your suggestions.
    Thanks in Advance,
    Kalanga 

    KCav45
    I understand what you are referring to in the Premiere Elements 11 Welcome Screen. I see no opportunity to pause what you are seeing. I suspect that what you are seeing are merely "teasers" to encourage you to learn/buy more...Adobe TV and elsewhere. Right now there are 4 sections with buttons to navigate the 4. Each section has certain options, none of which is pause.
    a. Button one...display of Top Features and What's New.
    b. But I think that Button two is a major spot with its Getting Started, Community Help, Adobe TV, and Facebook links
    I would best describe all this as a Helpful Quick Links spot for the user rather than a place to stop or pause.
    ATR

Maybe you are looking for

  • How do you move bookmarks in safari on a G4 to an iMac?

    I've tried everything that I can think of! Connected my iMac and G4 together and tried to "Import Bookmarks" and have no option to choose safari on my G4. Put my G4 safari on an external drive and hooked it to my iMac. Same results. Any suggestions w

  • WBS element and Cost Center

    Hi Gurus, As far as I know, when the a/c assignment category is P in a PO, the costs are assessed on the cost object WBS element and when the a/c assignment category is K in a PO, the costs are assessed on the cost object cost center. But, as I drill

  • Tickets of Product costing and COPA

    Hi Can any body working product costing or CO_PA Could you please send the ticekts and analysis to me i want to become CO cosultant in these two sub modules Regards

  • Accounting - Account Assignment - How to Undo

    Is there a way to undo the Account Assignment in cProjects (Accounting Tab) Currently the cProject - cPR1 is with Transferred, Released Status and a WBS - WBS1 has been assigned at  cProject level. Now, we need to assign this WBS1 to another cProject

  • IDVD(9) not accepting FCE 4 *.mov files

    Notification from iDVD : Unsupported file type : unknown format.... The movie was a quick time export, not a QT conversion... from FCE 4 This occurred after I upgraded to snow leopard and FCE HD 3.5 to FCE 4.. The QT.mov runs on QT.. I read most of t