Need guidance for iphone4s without contract

hello am planning to buy iphone 4s from apple store without contract. I just want to know whether it will perfectly work in india with all the Local GSM Carrier, or if there is any apple restricted carrier for india can you please help me out

without contract and unlocked are 2 different phones. Be sure to get an unlocked one. Test your sim from India before you leave the store.
Also note that the warranty is not international. If you buy that phone you will need to ship it to someone you know in that country to be taken in for service. All shipping will be at your expense.
You are best to buy one in India where they are unlocked and have local warranty support. Have a look at this user who bought one outside of India and is trying to get service: https://discussions.apple.com/thread/4049298?tstart=0
Good Luck.

Similar Messages

Need guidance for setting up distribution list

I have OD setup, I have Mailing Lists setup for groups such as IT, Marketing, etc.
The only thing I have not quite figured out is setting up distribution lists for outside senders that can be distributed to LDAP users in OD. I have been searching the forums and have found bits and pieces of data, but cannot yet locate any guidance for getting this setup.
I thought that this would be handled in the /etc/aliases file, but it appears that this only applies to local users.
If someone could point me in the right direction, I would be grateful.

I understand that more than 15,000 photos in a catalogue will degrade Lightroom's performance
100% incorrect false misleading don't listen to this nonsense, people in this and other forums have over 1/4 million photos in a single catalog
I am concerned that several catalogues will be confusing about which catalogue a specific image is in.
Very smart!
What guidance can someone suggest for creating and organizing multiple catalogues?
Use a single catalog, and move towards keyword/caption/metadata organizing rather than folder-based organizing (as much as can practically be done given the time constraints in your life)

Need guidance for implementing perimeter authentication

Hello,
1.) I have a WLS and a WLI Server on different servers, both have access to the same Active Directory LDAP.
2) I want the WLS application to authenticate a user via username/password, and then call the WLI JPD process (on the other server) as that user, WITHOUT having to re-authenticate the user (that was authenticated on the WLS).
3.) It sounds like I need perimeter authentication, BUT do I need to customize an authentication and assertion provider, etc --OR is there someway of configuring Weblogic's default providers?
Thanks for any and all help!
Keith

export is not a backup.Export is not a Physical backup but its a logical backup...:)
I agree sybrand it is recommended not to rely on Export because it is inconsistent...but it is still valid if an user acciedentaly drops the tables or objects..
Cheers
Maran

I need Guidance for SAP Teched for BW

Hi Everybody,
Iam new to this forum.I need some guidance regarding preparation for BW certification.
1.Which books i should read for what topics?
2.How many questions from individual topics we may expect?
3.Any documents that may help in preparing for BPS part.
4.I need some personal plans followed by you to get success in Teched(Your experiences).
Hope all of you will support me in all respects so that i too can achieve certification.
Thanks for your support.
Best regards,
Venu
mail:[email protected]

Hi Venu,
Check below links
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
BW Certification Preperation
BW CERTIFICATION 3.5
Re: SAP BW Certification
/thread/49323 [original link is broken]
BW certification
All the best...
Krishna

Buying an iPhone4 without contract.

When you buy an iPhone 4 in the Apple store (USA) does it come with a pre payed AT&T number already inside the device?

They will activate or you will need to do so via iTunes when you get home. AT&T does not offer any pre-paid accounts with the iPhone. You have to go in under contract and you must have a data plan.
Since the phone's are all carrier-locked to AT&T if sold in the USA, you're stuck with that.
P.S. Sure, you can buy a non-contract phone, for $599/$699, but it is still locked to AT&T, as mentioned.

Need guidance for fusion web developement

Hi. I am newbie. I am currently using jdeveloper 11.
I have surfed a lot of videos about application developement using oracle fusion web development. Can anybody please suggest some really good books/tutorials/videos for my requirement below.
1. There are lot of tables which I have created for my business. The jsf page should have the feature to view existing/add data to these tables. It should be able to plot graphs.
2. I have created batch files which will send mails. I need to use buttons on the page which when clicked will exectue these batch files. In my previous post, they have asked me to use an ActionListener.
3. I had studied Java programming a long time ago (forgotten almost all of it). Please tell me what concepts of java should i study again so that i can program all these above things into my aplication.
I have until now just built a simple application which allows me to display values from a table in an adf form on a jsf page. I have surfed enough forums, like stackoverflow.com but i am not able to find the answers that i need to these above questions. This forum is my last hope! Please help guys!
P.s : I have glanced through these books,
Jdeveloper handbook 11g, quick start guide to oracle fusion web development.
Regards,
Sachin

Hi,
1.http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_58/jdtut_11r2_58_1.html
2. why do you need batch files? you can send mails through javax.mail API http://adfblogs.blogspot.com.es/2012/01/sending-e-mail-from-adf-application.html
3.this post resume a lot of resources for training and beginning https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper

Need guidance for ePubs for iBooks

I'm a professional formatter and have converted files to ePubs for several years. Now some of my clients want to upload directly to iBooks with an Author account. Since I'm a PC person I don't work with MACs although I myself have an Apple account (I have an iPad and iPhone). Lately several clients have gotten stopped at the upload because Apple says that the file they are trying to upload has spaces (that's the way my conversion software saves ePubs). So my question, should I be sending my clients special ePub files for iBooks with new space-less file names? It's not a problem, I just need to know to do this. All of my ePubs are validated through IDPF.

I found this at p. 46 of the iBookstore asset guide:
"All characters in the URIs must be valid with non-alphanumeric characters properly encoded (e.g., space should be encoded as '%20'). This problem most often surfaces in URIs in the NCX files and is due to spaces included in filenames. "
Via an account at iTunes Connect, you can normally get all the various guides produced by Apple regarding books (BookProoferUserGuide, iBookstore - Publisher User Guide, iTunesConnect_Publisher UserGuide)

Need guidance for adding a seekbar bar timer!

I would like to add a timer that keeps track of total time and also current time that runs next to my seek bar component for my flash movie. How can I do this? For example: 1:11 | 2:04 ... the 1:11 displays the current time of the movie and the 2:04 would represent the total time of the video.

Wow! It's working. Thank you for so much help. I have a couple of preference questions if you don't mind. Currently the timer is not rounding the numbers to four digits for (minutes and seconds ie 10:33), but it is including the whole number (see attached jpg) is there a way to only display minutes and seconds rather than counting down the whole number without rounding them.
Also the timer works on the initial movie load, but if the user drags the progress bar or plays the movie again the timer doesn't restart - or start over again it stays on the last number entered. Is there a way that it always keeps track of the movies progress regardless of when the movie is loaded.

Need guidance for adavnace java

Hello,
please can any one help me with advance java. i need to start learning advance java, can any one refer me good books for all the modules in advance java, i appreciate ur help.
regards
raghu

The Sun's own Java EE tutorial covers everything: [http://java.sun.com/javaee/5/docs/tutorial/doc/]
If you're only interested in learning JSP/Servlet and some essential taglibs, then part II is sufficient.

Need guidance for eDirectory for GroupWise 2014 Installation

Hello,
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory. This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
I am including two attachments. One attachment shows my eDirectory installation screen where I am to declare a tree and context, and to create my Admin account. Why do I keep getting a Context Format Error, and what should it look like? Please provide an example for each field shown on the screenshot example. Also, if you need a domain name, let's call it mycompany.com for now. The Windows 2012 server is in Workgroup Mode and it will not be joined to Active Directory.
Thank you.

Hi there,
Originally Posted by jhieb
I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory.
You are aware that with GroupWise 2014 no directory (be it eDirectory or Active directory) is not needed anymore?
Originally Posted by jhieb
This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
De GroupWise documentation does indeed not go into the eDirectory details. eDir is seen as a different product for which you can find the needed documentation in it's own section.
I'm curious though, are you wanting to install eDirectory because you will need that at a later point in time, or because you think that is required to run GroupWise 2014?
Cheers,
Willem

Need guidance for a Combo Box and Keystoke/Validate script

Hello,
My goal is to have a combo box selection trigger and enter a value into a text field however the text field needs to be editable. I want the combo box to determine a default value but changeable by the user if necessary. Here is the script, I just don't know where to put it.
if (!event.willCommit) {
var M1Month = this.getField("Month 1 Pulldown").value; var M1Exp = this.getField("M1 Exp");
if(M1Month == "January") {M1Exp.value = "1/31/10"};
if(M1Month == "February") {M1Exp.value = "2/28/10"};
if(M1Month == "March") {M1Exp.value = "3/31/10"};
if(M1Month == "April") {M1Exp.value = "4/30/10"};
if(M1Month == "May") {M1Exp.value = "5/31/10"};
if(M1Month == "June") {M1Exp.value = "6/30/10"};
if(M1Month == "July") {M1Exp.value = "7/31/10"};
if(M1Month == "August") {M1Exp.value = "8/31/10"};
if(M1Month == "September") {M1Exp.value = "9/30/10"};
if(M1Month == "October") {M1Exp.value = "10/31/10"};
if(M1Month == "November") {M1Exp.value = "11/30/10"};
if(M1Month == "December") {M1Exp.value = "12/31/10"};
if(M1Month == " ") {M1Exp.value = ""};

I did not say to take out the line. You need to replace the "" (a null string), with " " (a space).
But I would look at using the 'switch' statement that allows for a series of logical test and if none of those specific test has been passed takes a default action.
You need to put the script in the 'Custom keystroke script'.
if (!event.willCommit) {
var M1Exp = this.getField("M1 Exp");
if(event.changeEx == "January") {
M1Exp.value = "1/31/10";
} else if(event.changeEx == "February") {
M1Exp.value = "2/28/10";
} else if(event.changeEx == "March") {
M1Exp.value = "3/31/10";
} else if(event.changeEx == "April") {
M1Exp.value = "4/30/10";
} else if(event.changeEx == "May") {
M1Exp.value = "5/31/10";
} else if(event.changeEx == "June") {
M1Exp.value = "6/30/10";
}else if(event.changeEx == "July") {
M1Exp.value = "7/31/10";
} else if(event.changeEx == "August") {
M1Exp.value = "8/31/10";
} else if(event.changeEx == "September") {
M1Exp.value = "9/30/10";
}else if(event.changeEx == "October") {
M1Exp.value = "10/31/10";
}else if(event.changeEx == "November") {
M1Exp.value = "11/30/10";
}else if(event.changeEx == "December") {
M1Exp.value = "12/31/10";
}else{
// all other selections
M1Exp.value = "";
} // end not will commit
You will also need to use the 'event' object's 'changeEx' property.
If you do not need the selected text, by setting the export value to the expiration date your script could be:
if (!event.willCommit) {
this.getField("M1 Exp").value = event.changeEx;

Need guidance for upgrading application server

hello everyone ,
i have recently upgraded my oracle database from 9.2.0.5 to 10.2.0.4 on HP uX 11.11 , my EBS version is 11.5.10
now i want upgrade my application server, firstly i didnt knew version of my AS
after searching through oracle installer i found out the following components
/appldvp/apps/prodora/8.0.6
Oracle Unix Installer 4.0.3.0.0
Oracle On-Line Text Viewer 1.0.1.0.0
Client Software 8.0.6.0.0
Ordts Common Libraries 8.0.6.0.0
ORACLE NLS Libraries and Utilities 8.0.6.0.0
ORACLE Core Libraries 8.0.6.0.1
ORACLE Common RDBMS Libraries and Utilities 8.0.6.0.1
ORACLE PL/SQL Libraries 8.0.6.0.0
ORACLE Common Libraries 8.0.6.0.1
ORACLE Common Precomp Libraries 8.0.6.0.1
ORACLE Common Network Libraries and Utilities 8.0.6.3.0
ORACLE Common Trace Libraries 8.0.6.0.0
ORACLE Common Utilities 8.0.6.0.0
ORACLE Common Agent Libraries 8.0.6.0.0
ORACLE Common Libraries and Utilities 8.0.6.0.0
Platform specific Libraries and Utilities 8.0.6.0.0
Net8 (SQL*Net and Names) 8.0.6.3.0
TCP/IP Protocol Adapter 8.0.6.0.0
Remote Operations 3.0.2.0.1
Oracle Names 8.0.6.3.0
ToolKit 6.0 Base 6.0.8.10.1
Discoverer Collector 4.1.48.06.00
Configuration Guide 4.1.33f
Discoverer Libraries 4.1.48.06.00
Discoverer Locator 4.1.48.06.00
Discoverer Preferences 4.1.48.06.00
Discoverer Session 4.1.48.06.00
Oracle Discoverer Viewer for Web 4.1.48.06.00
Oracle Discoverer Plus 4.1.48.06.00
Oracle Discoverer Server (Web) 4.1.48.06.00
JInitiator 1.1.7.30
JInitiator 1.1.8.11
VisiBroker Smart Agent 3.3.1.0
VisiBroker for C++ 3.3.3.0
VisiBroker for Java 3.4.0.0
VisiBroker Products 3.3.1.0
PL/SQL 8.0.6.3.0
Oracle Server Manager 3.0.6.0.0
Oracle8 Enterprise (RDBMS & PLSQL) 8.0.6.3.0
<Database Startup> Load Files 1.0.0.0.1
Oracle Intelligent Agent 8.0.6.0.0
Oracle Trace 8.0.6.0.0
Precomp 8.0.6.3.0
Pro*C/C++ 8.0.6.3.0
Oracle8 JDBC Drivers 8.0.6.3.0
Java Runtime Environment 1.1.6.2o
Java Runtime Environment 1.1.8.13
SQL*Plus 8.0.6.0.0
ToolKit 6.0 Extension 6.0.8.10.1
Multimedia APIs 6.0.5.33.0
Tools Common Area 6.0.5.32.0
PL/SQL Procedure Builder 6.0.8.11.0-449
Integration Services 6.0.5.35.0
Oracle SQL Manager Library 6.0.8.10.0
Virtual Graphics System 6.0.5.35.0
Oracle Charting Library 6.0.8.10.1
Oracle Graphics 6.0.8.10.0
Oracle Forms Server and Forms Developer 6.0.8.11.3
Oracle Reports Server and Reports Developer 6.0.8.11.2
ZRC Library 6.0.8.3.5
GE Libraries 6.0.8.10.0
Release Notes for Oracle Tools Products 6.0.8.11.2
Tuxedo Support for Forms 6.0.5.2.0
Oracle Jinitiator (Domestic) 1.1.7.31
Oracle JDK Appletviewer (Domestic) 1.1.7.31
Oracle Browser 6.0.5.32.0
Oracle Wallet Manager 2.1.0.0.0
Common documentation resources 2.0.0.0
Oracle for HP 9000 Servers and Workstations Documentation 8.0.6.0
Resource Object Store 6.0.5.0.1
Toolkit Utility Library 6.0.5.33.1
Toolkit Automation Library 6.0.5.33.1
Oracle Information Navigator 6.0.4.0.0
Online Documentation Library 6.0.8.11.4
Project Builder 6.0.5.6.0
is AS version 8.0.6 , if it is , how do i upgarde to the latest on avaialble
thanx in advance

document 146468.1 specifies how to upgrade to latest realese of 9i AS , but i want ot upgrade it to 10gYou cannot upgrade your Oracle 9iAS to Oracle AS10g, you can only upgrade it to 9iAS (1.0.2.2.2). For more details, refer to Note: 186981.1 (What versions of Oracle9i Application Server Release 1 can be used with Oracle E-Business Suite Release 11i) and (Can an existing Release 11i application server be upgraded to Oracle Application Server 10g?)
If you want to have Oracle Applications Server 10g, you need to install it in a NEW ORACLE_HOME (Refer to Note: 233436.1 for more details).
i am still confused for my AS version , how can i clarify that To determine the version, issue:
UNIX: $ORACLE_HOME/Apache/Apache/bin/httpd -version
Windows: %ORACLE_HOME%\Apache\Apache\apache.exe -version
main components which i am using with my current AS are forms and reports serverOracle Developer 6i (Forms and Respports) are NOT part of Oracle Applications Server installation, it is installed under 8.0.6 ORACLE_HOME.
can they be independently upgraded?Yes, see my answer to the first question in this reply.

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

Need guidance for installation of SAP R/3 4.6C

Hi All,
I want to install SAP R/3 4.6C Version & SAP BW 3.1 version on Windows2003 Server. I tried searching for the applicable guides on http://service.sap.com/instguides but got completely confused as there are soo many of them. Not sure which one i should use. Can you please send me the exact link to the installation guides required.
Moreover is the software to install SAP R/3 4.6C Version available on Service.sap.com? please let me know. If yes. please send the link for that too.
Your help is appreciated!
Thanks & Regards,
-Megha

<b>-> 46C is no longer in standard maintenance</b> (you could order extended maintenance at an extra price...)
-> so: you either order or you will not be able to dl r/3 46C
-> which database system do you plan to use?
-> i'd rather start with sap r/3 47x200 sr1 or sap erp
<b>standard installation procedure:</b>
- get instguide + relevant sapnotes
- check & apply prerequisites
- as for oracle: install database software oracle (using runInstaller) and apply patches
- install central instenace using r3setup and template r3central.r3s
- install database instance usind r3setup and template r3database.r3s
- perform post-installation actions..
GreetZ, AH

Need guidance for impdp

Hi all,
I have a situation here. I am a table dump from production which i need to import in the test database. In the production the tables are having some constraints,indexes,triggers etc the test databases also have the triggers,constraints and indexes but they are different from that of the production. The application team wants the triggers,constraints and indexes of the test db to remain as it is at the same time they need the triggers,constraints and indexes also to be imported into the test db. How can I do that. How should I sketch my import statement. Please help. Sorry if question is wrong.
Thanks
Krishna

KRIS wrote:
Hi all,
I have a situation here. I am a table dump from production which i need to import in the test database. In the production the tables are having some constraints,indexes,triggers etc the test databases also have the triggers,constraints and indexes but they are different from that of the production. The application team wants the triggers,constraints and indexes of the test db to remain as it is at the same time they need the triggers,constraints and indexes also to be imported into the test db. How can I do that. How should I sketch my import statement. Please help. Sorry if question is wrong.
Thanks
KrishnaI think creating the sql file from production dump will help. sorry if i am wrong

Need guidance for iphone4s without contract

Similar Messages

Maybe you are looking for