Need HDV encoding for backup and encoding in windows.

Need HDV codex for PC. rather than caputre back to tape then onto my PC with ASpect HD.
I would like to encode a project and store it on my pc with little to no loss in quailty. Is there any type of codex that will keep te HDV quailty but plays and encodes with WINDOW MEDIA ENCODER? and what are the settings?
I have done this with DV footage by going to export - Useing quicktime conversion: settings avi -Options - DVCPro. I can't seem to do them same useing HDV. I think the new FC6 can do this. but how?
thnaks for your help
Message was edited by: skatesurferdude

You would need a utility that will encode to your desired format (AVI?). Such utilities would be Sorenson Squeeze, Autodesk Cleaner and Compression Master. Copy it to the Windows system after encoding. And yes, it will take a very long time unless you have a node cluster (render farm) of some sort so you are probably better off sending it back to tape and capturing it natively on the PC if you are wanting to work on the footage there. If you are just wanting to play the video on the PC then encode it.

Similar Messages

  • HT1414 how much disk space is needed for backup and restore.

    i want to unlock iphone,for this how much disk space is needed for backup and restore activiti

    OK... now subtract the music. That's not part of the iPhone backup. Neither are apps, but in app data is.
    Why are you asking? Did you get an error?  If so, then clear out some disk space.

  • Time Capsule best to dedicate for backup and usb external for other data or partition TC for dual

    I have lots of video and photo and have 2TB drive on my iMAC and want to use TC for backup. 
    1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC?  Otherwise very slow via wireless and perhaps better to get Seagate Go Flex or WD and go Firewire right?
    2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
    Here's my use case:
    1) Time Machine tied to TC for the 2TB via wired to main machine iMAC - I only have this 1 iMAC.
    2) Like to share data with iPhone and iPAD some pictures, etc...  so do this with USB port and see data on the shared drive via iPhone and iPAD - no need to backup - just viewing - but need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
    3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
    Sorry for multi questions - my first iMAC so still stumbling around to see what works best for me.
    Thanks,
    ///don

    don1217 wrote:
    1) Since alot of video and photo, can plug in via ethernet or "cable/usb" vs. wireless to back up my main iMAC?
    If I understand your question, depending on the signal strength, backing up over Wi-Fi can be rather slow.  An Ethernet connection would be much faster, particularly for the first backup, which will the the largest.  Backing up to a locally-connected disk will be faster still.
    2) I do need and like to share other data shared vs. just TC to Time Machine Backup, reading this community input, can I confirm that best practice is to let TC have as much dedicated space as possible for Backup and mix partition to do 500GB per say for data on the TC?
    I'm not sure what you mean by "mix partition to do 500GB per say for data on the TC".  It's not recommended to share the same volume for Time Machine output and other things.
    need wireless - how does iPhone and iPAD detect this device - do I need app or something to view shared drive stuff?
    If you mean that you need wireless to give an iPhone or iPad access to the Internet, a Time Capsule would do that.  If you want to give those devices access to content on a Time Capsule, that's still an immature technology, although things may improve with iOS 5 or updates beyond that.
    3) Like to share and light backup for couple PC Win7 laptops just to get files back and forth or share things between family member - nothing intense - but can PC win7 laptops see the shared drive via IP setup or something like that?
    A WIn7 computer will be able to see files on the drive(s) of a Time Capsule.  I haven't tried that, but instructions are available.

  • Migration 50 Laptop using MS MDT and USMT for BACKUP and DATArecovery

    Dears all,
    I currently manage a migration project for 50 Laptop via Microsoft MDT2010 and I use USMT for BACKUP and data recovery.
    Obviously users have an Iphone and Itunes 10.x.
    I would like to know what are the directories under Win XP I need to setup in order to backup the complete IPhone and what are the destination directories to inject them back into Win7 x86.
    Keep me posted please .
    Serge

    Nice to see you again here in the forum ewen :) and thanks for sharing your experience with us! Marry Xmas!

  • Time Capsule stuck at Preparing for Backup, and internet TC latency issue

    I have an iMac that backs up to my 1TB Time Capsule. I have had it since March. Suddenly it stopped backing up. It get's stuck at "preparing for backup" and never actually completes a backup.
    I am also experiencing a HUGE latency issue with my internet connection. I am constantly having to use the 'refresh' page button in Safari.
    help....

    TB,
    *_Time Machine May Report "Preparing..." For a Long Time_*
    Consider these factors regarding an extended period of "Preparing...". Consider each topic separately and do not attempt to act on all of them at once.
    *Recent Crash or Other Major System Event* (Deep Traversal)
    The reasons for this process are described in an article by George Schreyer. “During the preparation step it checks the FSEvents log for consistency. If it determines that something isn't quite right it has to rescan the whole disk. This can take quite awhile. A full rescan is always triggered by a crash, an unplanned shut down event or by booting from some other bootable disk between backups…. After a crash, Time Machine must scan the whole disk to determine what it has to do because it cannot trust the information that it left behind. Connected via an Ethernet connection, this phase would typically take 20 minutes on an older PowerBook. Being connected wirelessly stretches this phase out to over 3 hours.” [http://www.girr.org/mac_stuff/backups.html]
    According to the following KB article it can sometimes take a very long time if Time Machine begins this “deep traversal” and has to compare data inventories. This may apply to your situation, particularly if many Gigs of data are involved. (http://support.apple.com/kb/TS1516)
    *Anti-Virus Software*
    Running anti-virus software can interfere with the backup process. Either disable it altogether, or try the suggestion outlined here, “If you use third-party anti-virus scanning software and have issues, make sure your Time Machine back up folder (Backups.backupdb on the Time Machine disk) is excluded from virus scanning.” (http://support.apple.com/kb/TS1516)
    *Software Updates* #
    Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your Macs directories. Time Machine will backup every file that has changed since the installation.
    If you take a look at the Console logs Time Machine may be reporting that your backups need "deep traversal". That's fine. Time Machine knows what is wrong and how to fix it. If you have a great deal of data, it may take quite awhile.
    After an OS update (like 10.5.5) Time Machine realizes the system no longer matches what it looked like during the previous backup. So it has determined that it's earlier catalogue of what-should-be-where is 'untrustable'. So it is going to go item-by-item comparing the before and after of your system. If you have just performed an OS Update then Time Machine knows what it's doing - let it do it!
    *Spotlight Keeps Indexing Backup Drive* #
    It may be that Time Machine can’t proceed or complete a backup due to a Spotlight indexing error. During this period, take a look at the Spotlight icon in the upper right corner of your screen. Is there a tiny dot pulsating in the center of the spyglass? Click on the icon. Is there a progress bar displayed? Generally Spotlight indexing is a good thing. But at time it may hang and never progress, preventing backups from taking place.
    Go to System Prefs --> Spotlight --> Privacy Tab.
    Drag your Time Machine disk into the window. It should now be among the items to exclude from indexing.
    Now quit System Prefs.
    Reopen System Prefs and remove ("-") the Time Machine disk from the window.
    This should clear out Spotlights cache. Naturally, Spotlight should begin indexing again (maybe even for a few hours depending on how much data there is), but it should eventually stop.
    *Reboot Time Capsule* #
    Stop the backup from the Time Machine menu.
    When the Time Machine icon stops spinning, unplug the TC from the wall outlet.
    Wait 10-15 seconds.
    Re-plug it in again.
    After it has restarted (30-60 seconds), attempt another backup.
    Time Machine will report “Preparing…” again, but it shouldn’t be lasting more than a couple of hours.
    Let us know if any of the suggestions above helped in your case.
    Cheers!

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • Already paid need mobile app for ps and ai

    already paid need mobile app for ps and ai on ipad

    Hi Cheskatlu
    The touch apps can be used with Creative Cloud but are sold separately, see this page http://www.adobe.com/products/creativecloud/tools-and-services.html
    Are these the apps you were referencing?
    -Dave

  • After install of Lion, secondary internal hard drive used for backup and time machine is not showing on the desktop.

    After an install of Lion, my secondary internal hard drive used for backup and time machine is not showing on the desktop. Cannot be located with Disk Utility either. Contains vital files! please help...

    I have a TB internal drive, but this is what it shows for memory slots:
    Memory Slots:
      ECC:    Enabled
    DIMM Riser B/DIMM 1:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser B/DIMM 2:
      Size:    2 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x0000
      Part Number:    0x000000463732353642363145353830304600
      Serial Number:    0x00000000
    DIMM Riser A/DIMM 1:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x42076007
    DIMM Riser A/DIMM 2:
      Size:    1 GB
      Type:    DDR2 FB-DIMM
      Speed:    800 MHz
      Status:    OK
      Manufacturer:    0x80AD
      Part Number:    0x48594D5035313241373243503844332D5335
      Serial Number:    0x4207631E
    DIMM Riser B/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser B/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 3:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty
    DIMM Riser A/DIMM 4:
      Size:    Empty
      Type:    Empty
      Speed:    Empty
      Status:    Empty
      Manufacturer:    Empty
      Part Number:    Empty
      Serial Number:    Empty

  • Hi, can someone help me, I did my first page in Muse, and I did just for computer, I need to do for tablet and phone, I have to do?  thx

    Hi, can someone help me, I did my first page in Muse, and I did just for computer, I need to do for tablet and phone, I have to do?  thx
    Esto puede ser en español? por favor

    Hello,
    Please refer to the links below, you will find them very useful.
    Adobe Muse Help | Creating a website for Mobile devices
    How to create a mobile website with Adobe Muse | Adobe Muse CC tutorials
    Video Tutorials:
    Design for mobile first | Adobe Muse CC tutorials
    Mobile best practices | Adobe Muse CC tutorials
    Plan your mobile site | Adobe Muse CC tutorials
    Preview your mobile site | Adobe Muse CC tutorials
    How to create a mobile website with Adobe Muse | Adobe Muse CC tutorials
    Regards
    Vivek

  • Please..how to instal libero mail on mi Ipad. I need the parameter for send and receive mail..Thanks

    Please..how to instal "libero" mail on my Ipad. I need the parameter for send and receive mail..Thanks

    FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

  • Trying to sell my ipad2 and i cant delete all the data as i need a password for icloud and i dont know what it is and i didnt know i had i cloud account  what do i do ?

    trying to sell my ipad2 and i cant delete all the data as i need a password for icloud and i dont know what it is and i didnt know i had i cloud account  what do i do ?

    Settings-general -reset-erase all content and settings.
    iCloud ID and password should be same as Apple ID.

  • My Verizon Cloud says "Content is pending for backup" and (Update pending), but it's been doing this for over a day now.  The number of photos hasn't changed and I have 26GB of space.  What's going on?

    My Verizon Cloud says "Content is pending for backup" and (Update pending), but it's been doing this for over a day now.  The number of photos hasn't changed and I have 26GB of space.  What's going on?

        Tinigal2112,
    We want to make sure your photos are backed up successfully! Have you tried to stop the process and start it again? You can stop the process by stopping the Cloud and backup process completely in Settings>Applications>All>Verizon Cloud>Force stop. One it has stopped make sure you care connected to WiFi and try the backup again.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

    How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

    Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
    Then use a screwdriver to remove the 10-12 screws to open up the case.

  • ISDN BRI for Backup and remote Support

    Hello,
    is it possible to configure an ISDN BRI
    to use them for Backup and if no Backup is up (primary connection works)i can use
    the ISDN BRI for Dialin (Remote Administration)?
    My Backup Solution works fine but i do not know, how i have to configure the ISDN BRI so, that acceppt my ISDN Call for Remote Administration.
    Thanks in advance
    Lorenz

    Hi
    You can configure 2 dialer interfaces one for dial in and another one for the dial out purpose.
    make the 2nd dialer interface as a backup interface for your primary interface and define the floating routes accordingly..
    would suggest to go thru the following link which has the whole lot of possible config scenarios discussed and it may help u out in getting the things place ..
    http://www.cisco.com/en/US/tech/tk801/tk133/tech_configuration_examples_list.html
    regds

  • How to switch iphone 5 to new pc for backup and sync. lost drive on old pc.

    How to switch iphone 5 to new pc for backup and sync without losing anythinng. Lost drive on old pc.

    Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.
    Connect iPhone.
    Sync.

Maybe you are looking for