Need help combining docs in Pages or Preview--glitches

I'm trying to combine about 20 short docs into one, so it will print as one document. I've tried the following, and run into these problems:
1) Copying thumbnails in Pages. This works most of the time--however, every now and then, it will only copy one page of a multiple-page document. It doesn't seem to matter what/where I click, only the first page of the doc will copy over. This seems to happen every fourth document or so.
2) In Preview: tried combining PDFs by dragging and dropping from the sidebar. However, that created something that, while looking like a 38 page single document, still considered each document as separate. When I went to print, it would only print the document that was in the window.
3) In Preview: tried doing the drag-and-drop by dragging directly on to the page in the sidebar, instead of below or above (as recommended for Snow Leopard in a MacWorld article). Didn't work. The green plus sign appeared, but after I dragged and dropped, the new pages would disappear.
It would be incredibly helpful if I could solve this problem. I've combined a number of how-to sheets into a packet, and not being able to combine them into a single document means a very long night of collating!
Thanks for any help.
BTW, I'm on an iMac, Snow Leopard (10.6.8), Preview 5.0.3 and Pages 4.1.

When copying the Thumbnails in Pages '09 to paste into the Thumbnails of a 2nd document, they both must have the same page dimensions and orientation.
When selecting make sure you have all the sections selected (surrounded by a yellow border). Hold down the shift key and select a range or individual selections if need be.
I have tested this and it works. Even between Word Processing and Layout templates.
In Preview I tested the merge and yes there appears to be a bug, even after saving, then printing.
It is not just the two parts treated as separate however, it seems to drop pages at random. Some from the dragged over version and some from the original.
Possibly it is retaining only pages with different numbers, because it did not renumber them. I will test it further later on when I have time.
Peter

Similar Messages

I need help on a main page. basic for u but not for me

Hello,
I need help on a main page.
I have this page called themainpage.cfm which someone here
asked me to make it the main page of my cf pages.
I have 2 pages right now in testing server.
Bloicpage.cfm
And
Index.cfm
When you go to
Server.myappfolders/repfolder
It let you go to
Server.myappfolders/rep/folder/ Bloicpage.cfm
Page.
I need for the themainpage.cfm to be the default when typing
Server.myappfolders/repfolder
Then have a link to the Bloicpage.cfm and a back button to go
back to the mainpage.cfm
Many thanks

here is the Bloicpage.cfm
which is currently the main page when you type
Server.myappfolders/repfolder
i need it to go to another main page which will have a link
to this and a back button from here and a back button from the
report html page and the excel csv page
ps .
i excluded the queries and some logics.
sorry
thanks
<cfparam name="form.ctcde" default="ALL">
<cfparam name="form.SDT" default="#now()#">
<cfparam name="form.EDT" default="#now()#">
<cfparam name="Form.outputFormat" default="CSV">
<cfsetting showdebugoutput="no"/>
<cfif not isdate(form.SDT)><cfset form.SDT =
now()></cfif>
<cfif not isdate(form.EDT)><cfset form.EDT =
now()></cfif>

<cfquery name="theQuery" datasource="cts9i">
SELECT
</cfswitch>
group by
Order by </cfquery>
<cfset a = a + 1>
</cfoutput>
<cfswitch expression="#Form.outputFormat#">
<cfc value="HTML">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<style type="text/css">
table{
font-family:Arial, Helvetica, sans-serif;
font-size:85%;
td{
font-family:Arial, Helvetica, sans-serif;
font-size:85%;
th{
font-family:Arial, Helvetica, sans-serif;
font-size:85%;
h2{
font-family:Arial, Helvetica, sans-serif;
font-size:120%;
h3{
font-family:Arial, Helvetica, sans-serif;
font-size:100%;
</style>
<body>
<cfoutput>
<div align="center">
<h2>Bkc#dateformat(form.SDT,"mm/dd/yyyy")# to
#dateformat(form.EDT,"mm/dd/yyyy")# Wudd</h2>
</div>
<div align="center">
<h3>#form.ctcde# CCwoph</h3>
</div>
<table border="1" cellpadding="0" cellspacing="0">
<tr>
<th>ccc##</th>
<th>aaa</th>
<th>cccc</th>
<th>iii</th>
<th>Eee</th>
<th>h11</th>
<th>h112</th>
<th>h22</th>
<th>h222</th>
<th>h33</th>
<th>h333</th>
<th>ehh</th>
</tr>
<cfset variables.nphc = 0>
<cfloop index="x" from="1" to="#arraylen(anArray)#"
step="1">
<cfif NOT anArray[x][1]>
<tr>
<td>
#anArray[x][2].c_nbr#
</td>
<td>
#anArray[x][2].c_dcdt#
</td>
<td>
#anArray[x][2].PAPD#
</td>
<td>
#anArray[x][2].Iii#
</td>
<td>
#anArray[x][2].Eee#
</td>
<cfset thirdArray = anArray[x][3]>
<cfif NOT arraylen(thirdArray)>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<cfelse>
<cfloop index="z" from="1" to="3">
<cfif z GT arraylen(thirdArray)>
<td> </td>
<td> </td>
<cfelse>
<td>
#thirdArray[z][2]#
</td>
<td>
#thirdArray[z][3]#
</td>
</cfif>
</cfloop>
<cfif arrayLen(thirdArray) gt 3>
<td nowrap="nowrap">
<cfloop index="z" from="4"
to="#arraylen(thirdArray)#">
#thirdArray[z][2]# - #thirdArray[z][3]#<BR />
</cfloop>
</td>
</cfif>
</cfif>
</tr>
<cfset variables.nphct = variables.nphct + 1>
</cfif>
</cfloop>
</table>
Total Ccwoph: #variables.nphct#
<BR />
<BR />
<HR />
<BR />
<div align="center">
<h3>#form.ctcde# CWph</h3>
</div>
<table border="1" cellpadding="0" cellspacing="0">
<tr>
<th>ccc##</th>
<th>aaa</th>
<th>cccc</th>
<th>iii</th>
<th>Eee</th>
<th>h11</th>
<th>h112</th>
<th>h22</th>
<th>h222</th>
<th>h33</th>
<th>h333</th>
<th>ehh</th>
</tr>
<cfset variables.phc = 0>
<cfloop index="x" from="1" to="#arraylen(anArray)#"
step="1">
<cfif anArray[x][1]>
<tr>
<td>
#anArray[x][2].c_nbr#
</td>
<td>
#anArray[x][2].c_dcdt#
</td>
<td>
#anArray[x][2].PAPD#
</td>
<td>
#anArray[x][2].Iii#
</td>
<td>
#anArray[x][2].Eee#
</td>
<cfset thirdArray = anArray[x][3]>
<cfif NOT arraylen(thirdArray)>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
<cfelse>
<cfloop index="z" from="1" to="3">
<cfif z GT arraylen(thirdArray)>
<td> </td>
<td> </td>
<cfelse>
<td>
#thirdArray[z][2]#
</td>
<td>
#thirdArray[z][3]#
</td>
</cfif>
</cfloop>
<cfif arrayLen(thirdArray) gt 3>
<td nowrap="nowrap">
<cfloop index="z" from="4"
to="#arraylen(thirdArray)#">
#thirdArray[z][2]# - #thirdArray[z][3]#<BR />
</cfloop>
</td>
</cfif>
</cfif>
</tr>
<cfset variables.phc = variables.phc + 1>
</cfif>
</cfloop>
</table>
Total Cwph: #variables.phc#

</cfoutput>
</body>
</html>
</cfc>
<cfc value="CSV">
<cfoutput>
<cfset variables.theOutput =
"Bkc#dateformat(form.SDT,"mm/dd/yyyy")# to
#dateformat(form.EDT,"mm/dd/yyyy")# Wudd">
<cfset variables.theOutput = variables.theOutput &
chr(10)>
<cfset variables.theOutput = variables.theOutput &
"#form.ctcde# CCwoph">
<cfset variables.theOutput = variables.theOutput &
chr(10)>
<cfset variables.theOutput = variables.theOutput & "C
##,Ad,Ccc,Iii,Eee,h11,h12,h22 ,h222,h33,H333,ehh">
<cfset variables.theOutput = variables.theOutput &
chr(10)>
<cfset variables.nphct = 0>
<cfloop index="x" from="1" to="#arraylen(anArray)#"
step="1">
<cfif NOT anArray[x][1]>
<cfset variables.theOutput = variables.theOutput &
"#anArray[x][2].c_nbr#, #anArray[x][2].c_dcdt#,
#anArray[x][2].PAPD#,#anArray[x][2].Iii#,#anArray[x][2].Eee#">
<cfset thirdArray = anArray[x][3]>
<cfif NOT arraylen(thirdArray)>
<cfset variables.theOutput = variables.theOutput &
",,,,,,">
<cfelse>
<cfloop index="z" from="1" to="3">
<cfif z GT arraylen(thirdArray)>
<cfset variables.theOutput = variables.theOutput &
",,">
<cfelse>
<cfset variables.theOutput = variables.theOutput &
",#thirdArray[z][2]#,#thirdArray[z][3]#">
</cfif>
</cfloop>
<cfif arrayLen(thirdArray) gt 3>
<cfloop index="z" from="4"
to="#arraylen(thirdArray)#">
<cfset variables.theOutput = variables.theOutput &
"#thirdArray[z][2]# - #thirdArray[z][3]# | ">
</cfloop>
</cfif>
</cfif>
<cfset variables.nphct = variables.nphct + 1>
<cfset variables.theOutput = variables.theOutput &
chr(10)>
</cfif>
</cfloop>
<cfset>
<cfset>
<cfset >
<cfset >
<cfset >
< & chr(10)>
</cfif>
</cfloop>
</cfoutput>
<cfcontent
type="application/msexcel"><cfoutput>#variables.theOutput#</cfoutput></cfc></cfswitch>

Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air (iOS7)

Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air

Oh, okay. After selecting the format I want to send, it says "creating... ". Then irrespective of the format I choose the message e.g. "creating spreadsheet" disappears, and so does the choice window (where I earlier chose Mail). I am taken back to the Numbers (or Page) where I had started from. Diavonex's note indicated that after "creating ... " stage I should be taken to an option where I can type in email address where I want to send the file, if I want to copy it to another address etc. I cannot arrive at that page - no matter whether I am working with Pages or Number, or which format I choose for the file to share !
I will try to close as you have suggested and try. However, I have switched on and off several times by now, but nothing changed!
Will look forward to any ideas to solve this !!!
Thanks much!
Best

I need help with a 1 Page Form with scrollable text field (5000 limit characters) and printing

Hello, I have no training in using Adobe Acrobat Pro or Livecycle Designer so I need major help with a 1 page form that I am attempting to create. Basically the form will be used to nominate employees for a Job Well Done Award.
The form contains the following:
1.) The name(s) of the employees being nominated and the date of the accomplishment.
2.) In the middle of the page I have a section for a write up, limited to 5000 characters, this is were I am needing the most help. A couple of things, about this section: The font is set at 11 and I don't want it to change. The text field has multiple-line, scroll long text enabled. The text field is a certain size and can only hold so much text, then it starts to scroll, which I am ok with, I like that feature. The issue I am having is during printing. I would like to keep the text field scrollable but when I print I would like to be able to print everything in that field. Executing this is the problem, I have no clue how to do it. I was hoping for some setting within Acrobat Pro or LiveCycle to be available, but the more I read and research this, it appears that it may require java, xml, basically some coding. I don't know for sure.
3.) Below the text field I have another field for the person nominating to type their name and right next to that another field for a digital signature.
4.) And finally below those two fields I have a Submit button that is setup to start email application so the form can be emailed to the proper inbox.
Thank you in advance.

With an Acrobat form the only thing you can do is export the text to
another location (like a blank field on another page) or to another file
format. With an LCD form you can expand the text box itself, but you'll
need to ask about that over at the LCD Scripting forum.

Need help with centering my page

I have done everything I can think of, including going through the many posts here to try and correct this with no luck
Please look at:
http://ebnerproductions.com
and
http://ebnerproductions.com/index2.htm
The first was built with basically just html.
The 2nd was done "properly" I believe with CSS and HTML. The 2nd also has "div - #wrapper"
left and right margins are auto also... nothing changed.
Do I need to change something in the CSS from absolute, to fixed or inherit?
I am completely lost at this point and really really need help.
Thank you again in advance....
Adam Ebner

Your CSS is corrupted -
:visited {
    color: #6CF;<meta name="keywords"
(note the appearance of the meta tag within the :visited selector)
Fix that.
Then you would need to add this rule to the fixed CSS by changing this -
body {
    background-color: #EBEBEB;
    background-image: url(BG.jpg);
    margin-left: 75px;
    margin-top: 75px;
    background-repeat: no-repeat;
to this -
body {
    background-color: #EBEBEB;
    background-image: url(BG.jpg);
    margin-left: 75px;
    margin-top: 75px;
    background-repeat: no-repeat;
    width:1346px;
    margin:75px auto;
Then ask yourself how many people will even see this page center since 1346 is way wider than the average browser viewport width on most systems.

I need help when i scan pages to my computer how do i save them as .doc, .txt, .xls, .xlxs, .csv, .p

when i scan the pages I need scaned to my computer they are coming up as imported pictures and videos. Im needing to save them as one of the following .doc, .txt, .xls, .xlxs, .csv, .pdf, .docx, .xlsx what do i do?

Hi, krystal!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer, and which application you're using to scan and save. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

I need help in formating in Pages

I need formating help in Pages: I need two columns for text, but other text not in the columns. How do I do both?

Hi Mandy,
I'm not sure if I've understood what you want to do, but here's an example, based on what you've said. These instructions apply to a word processing document.
The Columns control button toward the right end of the format bar is used to set the number of columns. It's the dark one (indicating it's been selected) just above the top left corner of its menu in the image:
The 'other' text (I've called it 'extra text' in the image) can be placed in a text box. Click the T in the toolbar to insert a text box, resize to fit your 'other' text, and position as desired.
One recommendation I'd make to everyone learning to use Pages is to download and read through the first few chapters of the Pages '09 User Guide. Then check in the other chapters when you want to learn how to use specific features of Pags.
You'l find a download link in the Help menu in Pages.
Regards,
Barry

Need help adding a second page on reports builder, paper layout.

Hi,
I have a requirement where I need to create a paper layout using Reports Builder (10.1.2.0.2). This report will print out the following:
1) Invoice
2) VAT Slip (on a separate page)
So far I have created the invoice part and it is printing properly. Now I want to add the Vat slip. When I use the "Trailer Section" on the rdf report, I create a frame and inserted some text. The report ran just fine. Then in the same frame, I added a repeating frame. And now the report is completing with the following error:
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 86
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
*** glibc detected *** ora_rw20_run: munmap_chunk(): invalid pointer: 0x09067b10 ***
Anyone have any idea why this is happening? Any help is much appreciated.
Or is there any way I can add a page that has to be printed after the invoice?
Thanks
-Nelly

If you have created your own template (but it sounds like you haven't) you will need to 'capture' that page so it repeats on following pages.
The whole process is described here:
"Letterhead and follower sets"
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&mforum=iworktips ntrick
Peter

Do I need adobe reader to view pages in Preview?

If I want to print a PDF page, when browsing web, do I also need Adobe Reader or is Preview sufficient to print PDF documents?? Don;t want to have duplicate apps if i don't need them.

Preview should be sufficient.

Need help with DOC type web service

hi,
I am trying to write a simple message style ( doc type ) web service but no success so far. I have tried to search for examples but no use. I already implemented some simple RPC style web services like calculator etc and able to use them. I am more interested in the DOC type ( which sends SOAP message and receives SOAP message back). Can Anybody give me an example for implementing this type of service ( very-simple say HellowWorld ) or point me to some website . I am not able to generate the response envelope. I can write the client program which will send a SOAP Envelope to this services with one parameter NAME and the services should return Hello Name but in a SOAP envelope form. I can create a SOAP message in this Client using SOAPConnection and MessageFactory etc. Your help will be really appreciated. There is very little stuff about webservices on the internet as well on this forum.
Thanks
Vinod

Hello kwilding2,
Thanks for the quick response and pointing to some useful websites. I downloaded the code from web service essentials BUT all the examples are using SOAP RPC calls. They create a call object and call one of the service methods and a response is returned. I am little confused about this stuff. I am looking for something which returns the response in a SOAP envelope for which i think i need to use JAXM API which I already have downloaded. I have created a client which composes a SOAP envelope using SOAPConnection and other MessageFactory classes etc and can send this SOAP envelope to a web service. In return I want the web service to give the SOAP envelope.
I have gone thru xmethods.net and picked the following stock quote request and response:
Sample Request envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuote xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<symbol xsi:type="xsd:string">IBM</symbol>
</ns1:getQuote>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Sample Response Envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuoteResponse xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:float">133.625</return>
</ns1:getQuoteResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I also want the things in this order. This webservice at xmethods just returns the price for a stock, so how they say it returns this Response Envelope. Is this Envelope something implied. I am getting more confused.
any help will be appreciated.
Thanks
Vinod

Need help in creating a page that populates 3 related tables

Hi All,
I am pretty new to Oracle and have been trying to use the wizards in HTML_DB to create one page that will populate three tables. I have thus far have NOT been able to find my solutions. I do not know enough experience in SQL/PL_SQL to create the code on my own.
Here is my dilemma. I have three tables:
con (for contacts) - with regular contact info = l_name, f_name, phone...
pro (for different programs) - with different program info = pro_name, priority..
procon (Contact/program) - that joins the two together with initial, follow-up and close date fields.
I created a composite primary key in the procon table that consists of the two pk's of the other two tables (using fk relationships).
I want to be able to use one page in HTML_DB to enter in the data which will populate all three tables. Is there a way to do this in PL/SQL?
* Also: Is there a book out there that you can recommend that really teaches SQL/PL_SQL?
I would really, really, REALLY appreciate the help!!!!!
Thanks,
d.

This isn't as bad as you think. I would create one procedure in a package and pass the parameters to the package via htmldb
procedure insval(in_a in number, in_b in number, in_c in number)
begin
   insert into tablea(cola)
    values(in_a);
insert into tableb(colb)
   values(in_b);
insert into tablec(colc)
   values(in_c);
end;and then you call it from htmldb using a process
schema.package.insval(:p1_a,:p1_b,:p1_c);That's ultra-simplified, but will get the job done.
-Scott

I need help with the numbering pages in a book file

I have a 53 chapter book that which each chapter is its own document. It used to work great. The page numbers of each document used to continue from the last page number of the previous document. That was until today when I opened it and all the page numbers now start at one. I don't know what to do. I have checked all of the options I knew to check. Each document still has the 'automatic page numbering' option selected. I truly don't want to have to go through and manully renumber every document. It will take time I do not have. If I can get somebody's help, it would be wonderful.

Nor do I. It sounds like everything is set correctly. You might want to try creating a new Book file and add the individaul documents into it and see if that fixes things. Also, have you tried updating the numberingfrom the menu since this started?

Need help developing photo download page

I have a website for my daughter's high school band to
display the photos we take during band events. It is more of a
basic html table with 300x200 pixel images showing in 2 columns and
50 rows. We manually type the file name in the table cell (yes I
know its the hard way to do it, but it didn't take long to setup
either). Anyway, now I would like to have teh other band parents be
able to click on a check box for multiple images on a page and have
a download button at the bottom of the page. Then they can download
all the pictures. Except that I will also have on the site in a
different folder path but still following the same names and this
other would have the full size version (8 megapixel) of the image
and that is what the user would download - not the image in the
table cell.
Yes, I am aware that MySql files should be able to do this
but I have never developed a MySql file before nor a page
referencing it. All of mine have been with Access databases. The
current pages generally require a global search and replace for the
date that is the first part of the file name for the image and it
only takes baout 30 minutes fo me to update 7 pages of 50 photos.
Since this is volunteer work I would like to keep it quick and
easy.
Is there anyone who can help or point me to an online
tutorial or page example that I could draw from?
Thanks
George

I'm not sure this will work, but how about using javascript timer that is specified in the following link:
http://www.elated.com/articles/javascript-timers-with-settimeout-and-setinterval
Create a javascript function on your JSP page that when called, will do something like this:
function timeOutPage(){
setTimeout(timeOutPage(), 5000);
document.formName.submit();
}

Need help with a 9-page form

I've created a single-page PDF form with LOTS of form fields (most of them checkboxes). I need to duplicate the page/form another eight times so that I have the same form across nine pages. My problem is, if I don't change the names of the form fields on each page (which would take a REALLY long time), as soon as something gets checked on the first page, it will also get checked on all eight of the other pages. Is there a way to make my nine-page form work without having to re-name each and every form field? Thank you for any assistance you can provide! I'm working in Acrobat 9 standard on a Windows computer.

Yes, make the single page into a template and spawn it eight times, specifying that you want to rename the fields in the process. Here are some previous threads that discuss this in more detail:
http://forums.adobe.com/message/4745648
http://forums.adobe.com/thread/1084011
The code in the second topic doesn't include the parameter that causes the fields to be renamed, you you could easily include it:
// Make a template out of the first page
var t1 = createTemplate("t1", 0);
// Spawn the template to create a new page
var oXO = t1.spawn({nPage: numPages, bRename: true, bOverlay: false});
// Now that we have the XObject, spawn the rest of the pages
while (numPages < 9) {
t1.spawn({nPage: numPages, bRename: true, bOverlay: false, oXObject: oXO});
Message was edited by: George Johnson to correct a typo.

Need help in design login page in struts

Friends. I am new to struts. I am designing one Login page which works fine. Now i want to add Remember Me option to login page. Help me to do this. Thanks in Advance.

Try this,
Action class
if(event check blah blah) {
                         Cookie usernameCookie = new Cookie("Username", strUserId);
                         usernameCookie.setMaxAge(60 * 60 * 24 * 30);
                         response.addCookie(usernameCookie);
                         Cookie passwordCookie = new Cookie("Password", strPassword);
                         passwordCookie.setMaxAge(60 * 60 * 24 * 30);
                         response.addCookie(passwordCookie);
                         Cookie checkCookie = new Cookie("Check", strCheck);
                         checkCookie.setMaxAge(60 * 60 * 24 * 30);
                         response.addCookie(checkCookie);
                    }else {
                         Cookie usernameCookie = new Cookie("Username", "");
                         response.addCookie(usernameCookie);
                         Cookie passwordCookie = new Cookie("Password", "");
                         response.addCookie(passwordCookie);
                         Cookie checkCookie = new Cookie("Check", eventname);
                         response.addCookie(checkCookie);
                    }in jsp
<bean:cookie id="uname" name="Username" value=""/>
<bean:cookie id="pword" name="Password" value=""/>
     <html:text property="UserId" value="<%=uname.getValue() %>"/>
     <html:password property="Password" value="<%=pword.getValue() %>"/>
     <logic:equal value="on" cookie="Check">
          <input type="checkbox" name="CheckBox" checked="checked" >
     </logic:equal>
     <logic:notEqual value="on" cookie="Check">
          <input type="checkbox" name="CheckBox">
     </logic:notEqual>
<html:submit property="" styleClass="button" ><bean:message key="button.login" /></html:submit>- vignesh

Need help combining docs in Pages or Preview--glitches

Similar Messages

Maybe you are looking for