Need help for Onyx operating system

Hello there
I need help
I using 9700 series and I want to upgrade my OS, but the problem is my carrier is not listed on this page http://na.blackberry.com/eng/support/downloads/download_sites.jsp
My carrier
three Indonesia
my device vendor id is 352
can you point me out where is the OS for that vendor id from this list http://na.blackberry.com/eng/support/downloads/download_sites.jsp
thanks in advance
~Work like you don't need the money~
~Love like you've never been hurt~
~Dance like nobody is looking~

sjafri wrote:
the problem is that my carrier said that, if I using non official OS from them, my warranty will be void, that's why I asked where my vendor link, and I hope I can get answer at this forum.
Hello,
The above highlighted statement is false -- your warranty is not void if you use another carriers OS. However, if your carrier so chooses, then can indeed refuse you any support (including warranty support since it is they who service the warranty) until you are on their approved OS level. All of which means that they must actually supply you with an approved (by them) OS to use...it is their responsibility to do so.
So, your choices are, as far as I can see:
1) Wait until you receive an answer from your carrier as to the approved OS you can use along with how to obtain it.
2) Use another carriers OS and, if anything goes wrong, fall back to your carriers approved OS before seeking more support from them.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I need help with my operating system

Okay, little bit of background:
I bought the iMac second hand from a family friend who we no longer have contact with, the operating system etc was already installed.
The disk drive on the mac is broke (I dont have the disks anyway, so it would be no use)
I never purchased the operating system, like I said, it was pre-loaded.
A few programmes weren't running correctly and the computer was just generally running slowly, so I decided to just restore the system as there was no important data on it and it would run faster in the end, and I figured the programmes would run properly again once restored.
Anyway, I unknowingly deleted the operating system in the process of the restore (I thought it would only delete personal data like it does on my windows PC)
I have no restore disk (a broken disk drive anyway), my apple ID was not used to buy the operating system, so therefore it cant be used to restore the operating system, I also never backed up the harddrive externally so it cant be reinstalled from that.
My problem: I have no operating system and no way of recovering it. I read about Mavericks and because its free, I decided to try and download it, but with no operating system, the mac can only run 'Safari' and wont save things I try to download to the harddrive (it just says theres no space and the download doesnt happen). I also tried to access the App Store from Safari to try to download OS X lion on my apple ID, but once again, when using Safari on a mac without an operating system, it is very restrictive and I cant access the download page.
I have no idea what to do and live miles away from the nearest apple store.
Thanks in advance for any help provided by anyone.
Jordan.
Additional information:
Its a 2007 iMac which was running OS X Lion 10.7.4 (I think, it was definitely Lion though).
Serial No. is W8*******X85
<Edited by Host>

Ah. Well, then you have an itty-bitty problem. You need to backup your files to start with. You will need your retail Snow Leopard installer DVD which your friend should have provided to you. If he did not then ask him to bring it to you. It belongs to you along with the original distribution discs that came with computer when it was new.
Do the following once you have the Snow Leopard DVD:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
After you sign into your App Store account with your Apple ID click on the Redeem option under Quick Links to download your copy of Lion.
As an aside to this: All actual 2007 iMacs are able to run Mavericks. So rather than buying Lion you may prefer to upgrade to Mavericks which is Free.

Need help upgrading my operating system

I need to upgrade my existing operating system which is 10.4.11 to 10.5 so I can down load Pages. How do I go about doing that?

The version of Pages available for download is in the Mac App Store. You need OS X 10.6.8 for the Mac App Store and additionally you need OS X 10.7.5 to run Pages. What you wish to do may not be possible with your old Mac.

Need help on upgrading operating system from Mac OSX 10.3.9

We have a Imac G5 with Mac OS X v 10.3.9. We want an upgrade to run new ILife stuff. We don't know what we are doing.
What should we get to update the operating system, where, and how do we upgrade the system?
Are there any particular requirements that my computer will need? How do I know that I have them?
Is there anything in particular in the System Profile that I need to make sure that I have?
Thanks.

You don't say what iMac G5 you have, but here's the *Mac OS X 10.5 Leopard installation system requirements* http://support.apple.com/kb/TA24950 You may have to increase your RAM. A minimum of 1GB is recommended. If you click on About This Mac, you will see how much RAM is currently installed.
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Suggest you download the two PDF documents at the top of this link.
 Cheers, Tom
Message was edited by: Texas Mac Man

Need help recovering my operating system.

My Pavilion g4-1125dx Notebook Crashed on me and i have tried the F11 System Recovery tab and all it does is gives me a loading bar then brings up a dialogue box labled X:\windows\system32\cmd.exe. it stops with this screen. Does anyone know what i am supossed to do next? I hit the enter button and it gets me no where.

If you don't have Recovery Discs you can order them for around $16. They are available in your Drivers list. Scroll down on the list to see "Order Recovery Media".
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5148...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I just got a new hard drive and need help installing my operating system

help me figure this out please

Is the new hard drive installed?
Is the new hard drive formatted?
Do you have the OS install DVDs?
MtD

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HT5228 I am running OS 10.5.8 on an iMac. There is no security update issued for this operating system - it only covers 10.6. Is my comuter vulnerable? Do I need to do anything?

I am running OS 10.5.8 on an iMac. There is no security update issued for this operating system - it only covers 10.6. Is my comuter vulnerable? Do I need to do anything?

I'm still not clear why Apple only issued security updates for 10.6 and later. I assume they think we should all update our operating systems or maybe they are just focusing on the majority of users?
Apple has had a long standing policy of only supporting the current and previous operating system releases. Whether they decide to make an exception for even older releases is anyone's guess.
You can send them feedback to express your opinion.
Or does the new Trojan not affect older OS? I'd like to know , if anyone has information.
As far as is known, it does affect older unsupported releases. Disabling Java in your web browser is the current preventive approach (and that is a community derived approach)

Need to upgrade processor for Lion operating system

How do I upgrade my MacBook Pro processor for Lion operating system?

I have the same question. I have a MacBook Pro 1,2 (yeah, oooooold) with the 2.16 Intel Core Duo, running Snow Leopard. If I'd waited another month before buying, it would've had the Core 2 Duo.
It would appear that I can't upgrade to Lion. I found one forum post that gives me hope, but I'm not holding my breath: http://www.mac-forums.com/forums/apple-notebooks/84004-processor-upgrade.html#po st524333 It suggests that the CPU might not be soldered in. Which leads me to wonder if upgrading the processor is possible...
I'd like to know if upgrading the processor is possible and/or practical (as in, doesn't cost as much as buying a new mac).

I need to update my operating system so i can get the latest version of Flash player - 11. This is so I can continue to watch 4 OD. How do I go about this?

I need to update my operating system to install Flash player version 11 so I can continue to use the 4 od player. How do I go about this? The version of OSX required is 10.6. Can anyone help?

Make sure your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
Mac OS X 10.6 Snow Leopard

I need help for Blackberry8700g

New User! I need help for Blackberry8700g; It is the error message Java.lang.outofmemory Error. I can not make even phone calls. After reset it is same message pop up and does not off the power jum error523 100408 .I tried How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F but it does not allow me to log in.Thanks,Rehan

check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

Need help for importing oracle 10G dump into 9i database

hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower version database. But i'm badly need help for importing the dump...
or
someone please tell me the site to download oracle 9i Developer suite as i can't find it in oracle site...

I didnt testet it to import a dump out of a 10g instance into a 9i instance if this export has been done using a 10g environment.
But it is possible to perform an export with a 9i environment against a 10g instance.
I am just testing this with a 9.2.0.8 environment against a 10.2.0.4.0 instance and is working so far.
The system raises an EXP-00008 / ORA-37002 error after exporting the data segments (exporting post-schema procedural objects and actions).
I am not sure if it is possible to perform an import to a 9i instance with this dump but maybe worth to give it a try.
It should potentially be possible to export at least 9i compatible objects/segments with this approach.
However, I have my doubts if this stunt is supported by oracle ...
Message was edited by:
user434854

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

Need help for Onyx operating system

Similar Messages

Maybe you are looking for