Need help in developing a query

Hi All,
i have two requirement.
1. in the selection screen, user enters a key date. the user would enter a from date and a to date. if the to date is left blank it should pick the system date when the report is run as to date.
2. in my cube i have data as 0calmonth. now if i want to display as january-11, how would i achieve the same.
Please provide me your suggestions at the earliest.
Thanks and Regards,
Sananda

Hi,
First u will create 2 varibles for from date & to date ,from date is character variable with user entry,To date is characterstic variable with customer exit .In cmod u will wrote code for this.
If todate equal blank then it is equal to sy-datum & plz explain little brief 2nd reuirement.
Regards,
Sai.

Similar Messages

Need help to develop Pythagoras theorem-

Hi i need help to develop proofs 2,3,4
of pythagoras theorems in java as demonstrations
These are applets can anyone help me with it or give me an idea of how to go about developing it -
the site is the following
http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
then double click on the screen to make it start

Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
     a                   b
---------------------------------------+
|       |                                |
a|   I   |              II                |
|       |                                |
---------------------------------------+
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
b| IV   |              III               |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
|       |                                |
---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
---------------------------------------+
|               .             VI         |
|     .                 .                |a
| V                               .      |
|                                        +
|                                        |
|   .                                    |
b|                                     . |
|                                        |
|                  IX                    |
| .                                      |
|                                    .   |b
|                                        |
+                                        |
|      .                                 |
a|               .                  . VII |
| VIII                   .              |
---------------------------------------+
                 a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
(a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
Given this fundamental result, the others can easily be derived from this one,
or did I answer a question you didn't ask?
kind regards,
Jos

Need help in developing BADI for IT0001

Hi All,
I need help in developing BADI for IT0001.
On IT0001 create or change, there is need to update IT0017 with following data from IT0001
-Company Code
-Cost center
-Business Area
-Begin and End Date.
Other fields from IT0017 need to be derived from Position and update in IT0017.
Please guide me how I can address this. I do not want to go for dynamic action, as it is not getting evoked during background jobs.
I am new to BADI development and will appreciate step by step instructions.
Thanks

Hi,
     follow the below steps to achive
Steps:
1.     Execute Business Add-In(BADI) transaction SE18
2.     Enter BADI name i.e. HRPAD00INFTY and press the display
        button
3.     Select menu option Implementation->Create
4.     Give implementation a name such as Z_HRPAD00INFTY
5.      You can now make any changes you require to the BADI within this
        implementation, for example choose the Interface tab there are 3 methods avialble
6.     Double click on the method you want to change, you can now enter
        any code you require.
7.      Please note to find out what import and export parameters a
        method has got return the original BADI definition
        (i.e. HRPAD00INFTY) and double click on the method name
        for example within HRPAD00INFTY contract is a method
8.      When changes have been made activate the implementation
<b>Reward points</b>
Regards

Need help to develop a custom connector

I need some help on developing the custom connector to Homegrown application and the version i am using is OIM9.0.3
First of all what are the steps do we need to care while developing a custom connector.
I can't able to find the process in google to develop the custom connector.
If you have any data regarding the development of custom connector, plz share to me....
What are the thing do we need to take care while developing the connector.
I referred in OIM9.1 version there was an option to develop the Custom connector by using Genric technology, can we create the custom connector by using the GTC feature in OIM 9.1
early response will be appreciated

The docs for the new GTC framework are here: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10360/about.htm#Toc153968019. GTC is useful if you target application exposes standards-based SPML (Service Provisioning Markup Language) user management interfaces, although it sounds like this isn't the case for you.
You will most likely need to go the traditional route in terms of connector development, which involves building OIM Process Task Adapters to invoke the application API's (I assume they're Java?) and invoking those adapters from within an OIM Provisioning Process.
Rob

Need help in insert statment query

Hi,
I have a table T1 with values like
col1
1
2
3
4
I need to write insert statment for t2 as
insert into t2(col1,col2) values ('AA',select col1 from t1);
The output of T2 should be
col1 col2
AA 1
AA 2
AA 3
AA 4
Any help in modifying the query.
Ashish

What is wrong with this?
INSERT INTO id_own_dw.id_t_dw_org_dq_tgt
       (cost_center_cod_vc_old,
        cost_center_cod_vc_new
     SELECT '3016052',<<<_-- this you can replace with your varibale in pl/sql block
            cost_center_cod_vc
       FROM id_own_dw.id_t_dw_msl_org_cctr2mkdiv
      WHERE busi_unit_cod_vc = '3016496'

Need help in refining the query

Hello Experts,
Need your help in refining the query further more.
table structure
Mskey Col A Col B
1   empno [20141127-20151128]1234
1   empno [20151201-99991231]232544
1   salutation [20141127-99991231]Mrs
1   salutation [20151127-99991231]Mr
2   empno [20141127-20151128]1234
2   empno [20151201-99991231]232544
2   salutation [20141127-99991231]Mrs
2   salutation [20151127-99991231]Mr
My requirement is to find the list of overlapping records based on the dates
user details may be varying from time to time as new data would be pushed through HR systems to identity store via an interface.
The job is getting failed whenever there is any overlapping with dates. So we proactively decided to schedule a job in this regards which runs weekly and would let us know for which and all the users there is overlapping dates are there, so that we can send the list to HR team for pushing new data.
Overlapping Issue Example:
The users employee id for an year it is 1234 and later he moved to another department and his employee id got changed and it became 2345 remaining all details are same. So the HR systems send the data for this user as empno - [20141127-20151128]1234 and empno - [20151201-99991231]232544
it means from 20141127 to 20151128 his employee no is 1234 and from 20151201 to 99991231 his employee would be 2345.
This is a correct case and the tool would accept this data.
the below cases are invald
Case 1: 1 salutation [20141127-99991231]Mrs 1 salutation [20151127-99991231]Mr
Case 2: 2 salutation [20141127-99991231]Mrs 2 salutation [20141127-99991231]Mr
So we wanted to find these overlapping records from tables.
My Query:
I am able to successfully write query for the case 2 type but unable to write for case1.
select id,colA
count(left(ColB,CHARINDEX(']',ColB))) as 'Count'
from tblA with (nolock)
where id in (Select distinct id from tblb with (nolock))
group by id, cola,left(ColB,CHARINDEX(']',ColB))
having count(left(ColB,CHARINDEX(']',ColB)))>1

Finally got the required answer with the below query
WITH Cte AS
SELECT ID,ColA,ColB,ROW_NUMBER() OVER(ORDER BY (SELECT 1)) AS RN,
CAST(SUBSTRING(ColB,2,CHARINDEX('-',ColB)-2) AS DATE) AS StartDT,
CAST(SUBSTRING(ColB,CHARINDEX('-',ColB)+1,8) AS DATE) AS EndDT FROM TblA
SELECT c1.ID, c1.ColA,c1.ColB
FROM Cte c1 JOIN Cte c2
ON c1.RN != c2.RN
AND c1.ID=c2.ID
AND c1.ColA=c2.ColA
AND (c1.StartDT BETWEEN c2.StartDT AND c2.EndDT OR c2.StartDT BETWEEN c1.StartDT AND c1.EndDT )

Need help in tunnig the query

Experts,
Plz help in tuning this query
SELECT
DECODE(WSH_DELIVERY_DETAILS.LOT_NUMBER,'5I27164/1U',1, TO_NUMBER(SUBSTR(WSH_DELIVERY_DETAILS.LOT_NUMBER, (LENGTH(WSH_DELIVERY_DETAILS.LOT_NUMBER) - INSTR(REVERSE(WSH_DELIVERY_DETAILS.LOT_NUMBER),'/') + 2), (INSTR(REVERSE(WSH_DELIVERY_DETAILS.LOT_NUMBER),'/')-1))) ) AS NO_OF_PLATES,
     P_FORM.DESCRIPTION FORMOFPRODUCT,
HZ_PARTIES.PARTY_NAME CUSTOMER, HZ_CUST_ACCOUNTS.ACCOUNT_NUMBER ACCT_NUM,
     NVL(OE_ORDER_HEADERS_ALL.CUST_PO_NUMBER,'XXXX') CUST_PO,
     INITCAP(HZ_PARTIES.ADDRESS1) BILL_ADD1,
INITCAP(HZ_PARTIES.ADDRESS2) BILL_ADD2,
INITCAP(HZ_PARTIES.ADDRESS3) BILL_ADD3,
INITCAP(HZ_PARTIES.ADDRESS4) BILL_ADD4,
     INITCAP(HZ_PARTIES.CITY) BILL_CITY,
INITCAP(HZ_PARTIES.STATE) BILL_STATE,
HZ_PARTIES.POSTAL_CODE BILL_PC,
     INITCAP(HZ_LOCATIONS.ADDRESS1) SHIP_ADD1,
INITCAP(HZ_LOCATIONS.ADDRESS2) SHIP_ADD2,
INITCAP(HZ_LOCATIONS.ADDRESS3) SHIP_ADD3,
INITCAP(HZ_LOCATIONS.ADDRESS4) SHIP_ADD4,
     INITCAP(HZ_LOCATIONS.CITY) SHIP_CITY,
INITCAP(HZ_LOCATIONS.STATE) SHIP_STATE,
HZ_LOCATIONS.POSTAL_CODE SHIP_PC,
     OE_TRANSACTION_TYPES_TL.NAME CATEGORY ,
     OE_ORDER_HEADERS_ALL.ORDER_NUMBER,
OE_ORDER_HEADERS_ALL.SOURCE_DOCUMENT_ID,
OE_ORDER_HEADERS_ALL.HEADER_ID,
OE_ORDER_HEADERS_ALL.FREIGHT_TERMS_CODE,
/* to_char(oe_order_headers_all.ORDERED_DATE,'DD-MON-RR HH24:MI:SS') ORDER_DATE,*/
to_char(sysdate,'DD/MM/RRRR HH24:MI:SS') ORDERED_DATE,
     ROWNUM,
OE_ORDER_LINES_ALL.INVENTORY_ITEM_ID,
     OE_ORDER_LINES_ALL.ORDERED_ITEM,
     OE_ORDER_LINES_ALL.ORDERED_QUANTITY,
     WSH_DELIVERY_DETAILS.SHIPPED_QUANTITY+DECODE(WSH_DELIVERY_DETAILS.DELIVERY_DETAIL_ID,129881,.22,0) AS SHIPPED_QUANTITY1, (WSH_DELIVERY_DETAILS.SHIPPED_QUANTITY+DECODE(WSH_DELIVERY_DETAILS.DELIVERY_DETAIL_ID,129881,.22,0))*OE_ORDER_LINES_ALL.UNIT_SELLING_PRICE AS LINE_PRICE,
     OE_ORDER_LINES_ALL.UNIT_SELLING_PRICE,
     JA_IN_RG_I.FOR_HOME_USE_PAY_ED_VAL,
----      SUBSTR(JA_IN_RG_I.EXCISE_INVOICE_NUMBER,1,2)|| SUBSTR(JA_IN_RG_I.EXCISE_INVOICE_NUMBER,4,8) INVOICE_NO,
     JA_IN_RG_I.EXCISE_INVOICE_NUMBER INVOICE_NO,
to_char(JA_IN_RG_I.CREATION_DATE,'DD/MM/RRRR') INVOICE_DATE1,
     to_char(JA_IN_RG_I.EXCISE_INVOICE_DATE,'DD-MON-RR HH24:MI:SS') INV_DATE,
     to_char(JA_IN_RG_I.CREATION_DATE,'DD/MM/RRRR HH24:MI:SS') INVOICE_DATE,
     JA_IN_RG_I.EXCISE_DUTY_RATE,
     JA_IN_RG_I.EXCISE_DUTY_AMOUNT,
     WSH_DELIVERY_DETAILS.LOT_NUMBER,
WSH_TRIPS.CARRIER_ID CARRIER_ID,
WSH_TRIPS.VEHICLE_NUM_PREFIX,
WSH_TRIPS.SEAL_CODE,
WSH_TRIPS.ROUTING_INSTRUCTIONS,
WSH_TRIPS.OPERATOR, WSH_NEW_DELIVERIES. DELIVERY_ID,
WSH_NEW_DELIVERIES. ADDITIONAL_SHIPMENT_INFO TRUCK_NO,
     WSH_TRIPS.MODE_OF_TRANSPORT VEHICLE_TYPE,
WSH_TRIPS.ATTRIBUTE6||' '|| WSH_TRIPS.ATTRIBUTE7||' '|| WSH_TRIPS.ATTRIBUTE8 REMARKS,
     WSH_TRIPS.ATTRIBUTE1 LR_NO, WSH_TRIPS.ATTRIBUTE7,
     WSH_TRIPS.ATTRIBUTE2 LR_DATE,
     DECODE(WSH_TRIPS.ATTRIBUTE3, '', '', 'ARE NO '||WSH_TRIPS.ATTRIBUTE3) AS ARE_NO,
     DECODE(WSH_TRIPS.ATTRIBUTE6, '', '', WSH_TRIPS.ATTRIBUTE6) AS REMARK1,
     DECODE(WSH_TRIPS.ATTRIBUTE4, '', '', 'R.P. NO. ' ||WSH_TRIPS.ATTRIBUTE4) AS PERMIT,
     DECODE(WSH_TRIPS.ATTRIBUTE5, '', '', 'Export Under '||WSH_TRIPS.ATTRIBUTE5) AS EXPORT_UNDER,
     DECODE(WSH_NEW_DELIVERIES.PORT_OF_DISCHARGE,'','', 'Seal No : '||WSH_NEW_DELIVERIES.PORT_OF_DISCHARGE) AS SEAL_NO,
     DECODE(WSH_NEW_DELIVERIES.DESCRIPTION, '', '', 'Container No : ' ||WSH_NEW_DELIVERIES.DESCRIPTION) AS CONTAINER_NO,
     MTL_SYSTEM_ITEMS_B.ATTRIBUTE4 AS EXCISE_TARIFF_NO,
     --MTL_SYSTEM_ITEMS_B.DESCRIPTION,
     HZ_CUST_ACCOUNTS.ACCOUNT_NUMBER,
     JSW_LOT_PACKSLIP.PACKSLIP_NO PACKSLIP,
     PR_TYPE.DESCRIPTION ||' ,'||
     P_FORM.DESCRIPTION || ' ,'||
     PR_GRADE.DESCRIPTION ||' ,'||
     PR_QTY.DESCRIPTION || ' ,'||
     DECODE(SUBSTR(PR_STL.DESCRIPTION,1,3),'Not','', PR_STL.DESCRIPTION) DESCRIPTION ,
HZ_CUST_ACCT_SITES_ALL.ATTRIBUTE7 S_CST_NO,
HZ_CUST_ACCT_SITES_ALL.ATTRIBUTE6 S_LST_NO,
HZ_CUST_ACCT_SITES_ALL.ATTRIBUTE5 S_ECC_NO,
A.ATTRIBUTE7 B_CST_NO,
A.ATTRIBUTE6 B_LST_NO,
INTERFACECRM.JSW_MES_COMMON_TNGL_T.JSW_ADDMINUTES(WSH_TRIPS.VEHICLE_NUM_PREFIX) POSTFIX_NUM
FROM -- jsw_vat_slno,
     MTL_PARAMETERS,
     HZ_PARTIES,
     HZ_CUST_ACCOUNTS,
     HZ_LOCATIONS,
     HZ_PARTY_SITES,
     HZ_CUST_ACCT_SITES_ALL,
     HZ_CUST_SITE_USES_ALL,
HZ_CUST_ACCT_SITES_ALL A,
HZ_CUST_SITE_USES_ALL B,
     OE_TRANSACTION_TYPES_TL,
     JA_IN_RG_I,
     WSH_DELIVERY_DETAILS,
     OE_ORDER_LINES_ALL,
     OE_ORDER_HEADERS_ALL,
     WSH_DELIVERY_ASSIGNMENTS,
     WSH_NEW_DELIVERIES,
     WSH_DELIVERY_LEGS,
     WSH_TRIP_STOPS,
     WSH_TRIPS,
     MTL_SYSTEM_ITEMS_B,
     JSW_LOT_PACKSLIP,
     IC_TRAN_PND,
               JSW_ITM_SEARCH_PRD_TYP          PR_TYPE,
          JSW_ITM_SEARCH_PRD_FRM          P_FORM     ,
               JSW_ITM_SEARCH_PRD_GRD          PR_GRADE,
          JSW_ITM_SEARCH_QUALITY_LEVEL PR_QTY,
               JSW_ITEM_SEARCH_SLITTING      PR_STL
WHERE /* jsw_vat_slno.excise_invoice_number=ja_in_rg_i.excise_invoice_number and jsw_vat_slno.organization_id = ja_in_rg_i.organization_id */
HZ_PARTIES.PARTY_ID = HZ_CUST_ACCOUNTS.PARTY_ID
     AND HZ_CUST_ACCOUNTS.CUST_ACCOUNT_ID = OE_ORDER_HEADERS_ALL.SOLD_TO_ORG_ID
     AND OE_ORDER_HEADERS_ALL.SHIP_TO_ORG_ID = HZ_CUST_SITE_USES_ALL.SITE_USE_ID
     AND HZ_CUST_SITE_USES_ALL.CUST_ACCT_SITE_ID = HZ_CUST_ACCT_SITES_ALL.CUST_ACCT_SITE_ID
AND OE_ORDER_HEADERS_ALL.INVOICE_TO_ORG_ID = B.SITE_USE_ID
     AND B.CUST_ACCT_SITE_ID                          = A.CUST_ACCT_SITE_ID
     AND HZ_CUST_ACCT_SITES_ALL.PARTY_SITE_ID      = HZ_PARTY_SITES.PARTY_SITE_ID
     AND HZ_PARTY_SITES.LOCATION_ID = HZ_LOCATIONS.LOCATION_ID
     AND OE_ORDER_LINES_ALL.SHIP_FROM_ORG_ID = MTL_PARAMETERS.ORGANIZATION_ID
     AND OE_ORDER_HEADERS_ALL.ORDER_TYPE_ID = OE_TRANSACTION_TYPES_TL.TRANSACTION_TYPE_ID
and upper(oe_transaction_types_tl.description) not like '%SUP%'
     AND OE_ORDER_HEADERS_ALL.HEADER_ID = WSH_DELIVERY_DETAILS.SOURCE_HEADER_ID
     AND OE_ORDER_HEADERS_ALL.HEADER_ID = OE_ORDER_LINES_ALL.HEADER_ID
     AND OE_ORDER_LINES_ALL.LINE_ID = WSH_DELIVERY_DETAILS.SOURCE_LINE_ID
     AND TO_CHAR(WSH_DELIVERY_DETAILS.DELIVERY_DETAIL_ID ) = JA_IN_RG_I.REF_DOC_ID
     AND WSH_DELIVERY_DETAILS.DELIVERY_DETAIL_ID = WSH_DELIVERY_ASSIGNMENTS.DELIVERY_DETAIL_ID
     AND WSH_DELIVERY_ASSIGNMENTS.DELIVERY_ID = WSH_NEW_DELIVERIES.DELIVERY_ID
     AND WSH_NEW_DELIVERIES.DELIVERY_ID = WSH_DELIVERY_LEGS.DELIVERY_ID
     AND WSH_DELIVERY_LEGS.PICK_UP_STOP_ID = WSH_TRIP_STOPS.STOP_ID
     AND WSH_TRIP_STOPS.TRIP_ID                = WSH_TRIPS.TRIP_ID
/* Input parameter can be either Invoice number or Delivery Id */
     AND (WSH_NEW_DELIVERIES.DELIVERY_ID = :DEL_ID OR JA_IN_RG_I.EXCISE_INVOICE_NUMBER = :INVOICE_NUMBER)
     AND NVL(WSH_DELIVERY_DETAILS.SHIPPED_QUANTITY,0) <>0
     AND     MTL_SYSTEM_ITEMS_B.ORGANIZATION_ID     = WSH_DELIVERY_DETAILS.ORGANIZATION_ID
     AND     MTL_SYSTEM_ITEMS_B.INVENTORY_ITEM_ID = WSH_DELIVERY_DETAILS.INVENTORY_ITEM_ID
     AND IC_TRAN_PND.LINE_DETAIL_ID               = WSH_DELIVERY_DETAILS.DELIVERY_DETAIL_ID
     AND     JSW_LOT_PACKSLIP.LOT_ID                    = IC_TRAN_PND.LOT_ID(+)
     AND     JSW_LOT_PACKSLIP.DELIVERY_ID          = WSH_NEW_DELIVERIES.DELIVERY_ID(+)
     AND      IC_TRAN_PND.LINE_ID                    = OE_ORDER_LINES_ALL.LINE_ID
     AND     IC_TRAN_PND.DELETE_MARK                = 0
     AND IC_TRAN_PND.COMPLETED_IND      = 1
     AND      IC_TRAN_PND.STAGED_IND                    =     1
     AND     P_FORM.CODE(+)                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,3,2)
     AND     PR_TYPE.CODE                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,1,2)
     AND     PR_TYPE.CODE                                   = P_FORM.PRD_TYPE_CODE
     AND     P_FORM.CODE                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,3,2)
AND     P_FORM.CODE                                   = PR_GRADE.PRD_FRM_CODE
     AND     PR_GRADE.CODE                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,5,2)
     AND     PR_GRADE.CODE                                   = PR_QTY.PRD_GRD_CODE
     AND     PR_QTY.CODE                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,7,2)
     AND     PR_STL.PROD_CODE                              = PR_TYPE.CODE
     AND     PR_STL.QUALITY_LEVEL_CODE                    = PR_QTY.CODE
     AND     PR_STL.CODE                                   = substr(OE_ORDER_LINES_ALL.ORDERED_ITEM,9,2)
     AND rownum=1
thanks,
baskar.l

Here is the explain plan
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 1 | 920 | 12628 |
| 1 | COUNT STOPKEY | | | | |
| 2 | NESTED LOOPS | | 1 | 920 | 12628 |
| 3 | NESTED LOOPS | | 1 | 728 | 12627 |
| 4 | NESTED LOOPS | | 1 | 718 | 12626 |
| 5 | NESTED LOOPS | | 1 | 684 | 12625 |
| 6 | NESTED LOOPS | | 1 | 674 | 12624 |
| 7 | NESTED LOOPS | | 1 | 665 | 12623 |
| 8 | NESTED LOOPS | | 1 | 655 | 12622 |
| 9 | NESTED LOOPS | | 1 | 532 | 12621 |
| 10 | NESTED LOOPS | | 1 | 522 | 12620 |
| 11 | FILTER | | | | |
| 12 | NESTED LOOPS OUTER | | | | |
| 13 | NESTED LOOPS | | 1 | 494 | 12617 |
| 14 | NESTED LOOPS | | 1 | 477 | 12614 |
| 15 | NESTED LOOPS | | 1 | 467 | 12611 |
| 16 | NESTED LOOPS | | 1 | 382 | 12610 |
| 17 | NESTED LOOPS | | 1 | 366 | 12609 |
| 18 | NESTED LOOPS | | 1 | 321 | 12606 |
| 19 | FILTER | | | | |
| 20 | HASH JOIN OUTER | | | | |
| 21 | TABLE ACCESS BY INDEX ROWID| IC_TRAN_PND | 1 | 22 | 3 |
| 22 | NESTED LOOPS | | 1 | 292 | 12601 |
| 23 | HASH JOIN | | 1 | 270 | 12598 |
| 24 | NESTED LOOPS | | 4011 | 908K| 6272 |
| 25 | HASH JOIN | | 4012 | 893K| 6272 |
| 26 | TABLE ACCESS FULL | JSW_ITM_SEARCH_PRD_GRD | 33 | 759 | 2 |
| 27 | HASH JOIN | | 20547 | 4113K| 6269 |
| 28 | TABLE ACCESS FULL | JSW_ITM_SEARCH_QUALITY_LEVEL | 54 | 1296 | 2 |
| 29 | HASH JOIN | | 24352 | 4304K| 6266 |
| 30 | TABLE ACCESS FULL | JSW_ITM_SEARCH_PRD_TYP | 7 | 154 | 2 |
| 31 | HASH JOIN | | 170K| 25M| 6260 |
| 32 | TABLE ACCESS FULL | JSW_ITEM_SEARCH_SLITTING | 73 | 1971 | 2 |
| 33 | HASH JOIN | | 44367 | 5719K| 6257 |
| 34 | HASH JOIN | | 4469 | 410K| 367 |
| 35 | TABLE ACCESS FULL| OE_TRANSACTION_TYPES_TL | 18 | 846 | 4 |
| 36 | TABLE ACCESS FULL| OE_ORDER_HEADERS_ALL | 38240 | 1755K| 362 |
| 37 | TABLE ACCESS FULL | OE_ORDER_LINES_ALL | 379K| 13M| 5761 |
| 38 | INDEX UNIQUE SCAN | MTL_PARAMETERS_U1 | 1 | 4 | |
| 39 | TABLE ACCESS FULL | WSH_DELIVERY_DETAILS | 579K| 21M| 5926 |
| 40 | INDEX RANGE SCAN | IC_TRAN_PND_N1 | 2 | | 2 |
| 41 | TABLE ACCESS FULL | JSW_ITM_SEARCH_PRD_FRM | 16 | 272 | 2 |
| 42 | TABLE ACCESS BY INDEX ROWID | MTL_SYSTEM_ITEMS_B | 1 | 12 | 2 |
| 43 | INDEX UNIQUE SCAN | MTL_SYSTEM_ITEMS_B_U1 | 1 | | 1 |
| 44 | TABLE ACCESS BY INDEX ROWID | JA_IN_RG_I | 1 | 45 | 3 |
| 45 | INDEX RANGE SCAN | JA_IN_RG_I_N3 | 1 | | 2 |
| 46 | TABLE ACCESS BY INDEX ROWID | HZ_CUST_ACCOUNTS | 1 | 16 | 1 |
| 47 | INDEX UNIQUE SCAN | HZ_CUST_ACCOUNTS_U1 | 1 | | |
| 48 | TABLE ACCESS BY INDEX ROWID | HZ_PARTIES | 1 | 85 | 1 |
| 49 | INDEX UNIQUE SCAN | HZ_PARTIES_U1 | 1 | | |
| 50 | TABLE ACCESS BY INDEX ROWID | WSH_DELIVERY_ASSIGNMENTS | 1 | 10 | 3 |
| 51 | INDEX RANGE SCAN | WSH_DELIVERY_ASSIGNMENTS_N3 | 1 | | 2 |
| 52 | TABLE ACCESS BY INDEX ROWID | JSW_LOT_PACKSLIP | 1 | 17 | 3 |
| 53 | INDEX RANGE SCAN | JSW_LOT_PACKSLIP_N1 | 1 | | 2 |
| 54 | TABLE ACCESS BY INDEX ROWID | WSH_NEW_DELIVERIES | 1 | 18 | 1 |
| 55 | INDEX UNIQUE SCAN | WSH_NEW_DELIVERIES_U1 | 1 | | |
| 56 | TABLE ACCESS BY INDEX ROWID | WSH_DELIVERY_LEGS | 1 | 10 | 2 |
| 57 | INDEX RANGE SCAN | WSH_DELIVERY_LEGS_N1 | 1 | | 1 |
| 58 | TABLE ACCESS BY INDEX ROWID | WSH_TRIP_STOPS | 1 | 10 | 1 |
| 59 | INDEX UNIQUE SCAN | WSH_TRIP_STOPS_U1 | 1 | | |
| 60 | TABLE ACCESS BY INDEX ROWID | WSH_TRIPS | 1 | 123 | 1 |
| 61 | INDEX UNIQUE SCAN | WSH_TRIPS_U1 | 1 | | |
| 62 | TABLE ACCESS BY INDEX ROWID | HZ_CUST_SITE_USES_ALL | 1 | 10 | 1 |
| 63 | INDEX UNIQUE SCAN | HZ_CUST_SITE_USES_U1 | 1 | | |
| 64 | TABLE ACCESS BY INDEX ROWID | HZ_CUST_ACCT_SITES_ALL | 1 | 9 | 1 |
| 65 | INDEX UNIQUE SCAN | HZ_CUST_ACCT_SITES_U1 | 1 | | |
| 66 | TABLE ACCESS BY INDEX ROWID | HZ_CUST_SITE_USES_ALL | 1 | 10 | 1 |
| 67 | INDEX UNIQUE SCAN | HZ_CUST_SITE_USES_U1 | 1 | | |
| 68 | TABLE ACCESS BY INDEX ROWID | HZ_CUST_ACCT_SITES_ALL | 1 | 34 | 1 |
| 69 | INDEX UNIQUE SCAN | HZ_CUST_ACCT_SITES_U1 | 1 | | |
| 70 | TABLE ACCESS BY INDEX ROWID | HZ_PARTY_SITES | 1 | 10 | 1 |
| 71 | INDEX UNIQUE SCAN | HZ_PARTY_SITES_U1 | 1 | | |
| 72 | TABLE ACCESS BY INDEX ROWID | HZ_LOCATIONS | 1 | 192 | 1 |
| 73 | INDEX UNIQUE SCAN | HZ_LOCATIONS_U1 | 1 | | |
we need to tune this query to reduce it time of execution as our users are very much affected in running requests.
thanks,
baskar.l

I need help with a SELECT query - help!

Hello, I need help with a select statement.
I have a table with 2 fields as shown below
Name | Type
John | 1
John | 2
John | 3
Paul | 1
Paul | 2
Paul | 3
Mark | 1
Mark | 2
I need a query that returns everything where the name has type 1 or 2 but not type 3. So in the example above the qery should bring back all the "Mark" records.
Thanks,
Ian

Or, if the types are sequential from 1 upwards you could simply do:-
SQL> create table t as
2 select 'John' as name, 1 as type from dual union
3 select 'John',2 from dual union
4 select 'John',3 from dual union
5 select 'Paul',1 from dual union
6 select 'Paul',2 from dual union
7 select 'Paul',3 from dual union
8 select 'Paul',4 from dual union
9 select 'Mark',1 from dual union
10 select 'Mark',2 from dual;
Table created.
SQL> select name
2 from t
3 group by name
4 having count(*) <= 2;
NAME
Mark
SQL>Or another alternative if they aren't sequential:
SQL> ed
Wrote file afiedt.buf
1 select name from (
2    select name, max(type) t
3    from t
4    group by name
5    )
6* where t < 3
SQL> /
NAME
Mark
SQL>Message was edited by:
blushadow

Need Help! Ad Hoc Query in HR Tables

Dear Friends,
I need to create a adhoc query for the following tables.
PA*
HRP1000
HRP1001
But I could select only PNPCE LDB... I do not know how to define one and get the information out from PA* and HRP1000 and HRP1001 info types....
Please help.
Thanks,
Joy

Hi Joydip,
Go to transaction SQ02, from the Edit menu go to "Change Infotype Selection" step. Go to the end of the tree structure. From "Infotypes of related objects" select the respective organizational object (e.g. org unit, position) & respective relationship. When you click on these items & confirm your selection, they all apeear in the infotype tree structure at the left part of the SQ02 screen. You can use them just like other info types of PNPCE logical DB.
Regards,
Dilek

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Need help in developing mobile app using SAP

Hi
I have a team of Android, iOS and Windows developers and we are planning to start developing mobile using SAP and SAP Fiori. Need help in getting started with SAP mobile development like i need plugins and development kits that i need to use.
Thanks
Ram

Hi,
What help needed ?
For SAP Fiori Use this link : http://scn.sap.com/docs/DOC-41598
For SAP Fiori Installation and Configuration Steps: http://scn.sap.com/community/mobile/blog/2014/06/10/fiori-technical-installation-and-configuration-of-one-app-from-a--z
Which Software you will use to develop Mobile Apps in SAP Platform ?So that i will suggest what to do ..
Regards
Lokesh

Need help on the below query.

Hi All,
I've a query given below..
SELECT W.WONUM,
     W.STATUS,
     WS.CHANGEDATE,
     EH.OLD_RATE
     FROM
     WORKORDER W,
     WOSTATUS WS,
     ESTIMATE_HEADER@GQMFOF EH
WHERE WS.CHANGEDATE BETWEEN '01-Oct-2009' AND '1-Nov-2009'
AND W.WONUM = WS.WONUM
AND EH.OLD_RATE = 'N'
AND WS.WOSTATUS = 'CLOSE';
I would like to get All the data which status =closed in the month of Oct for Old rate,
So for this i am writing the query above. But not getting the o/p.
It is giving me that " Table/View doesn't exist.
There 2 schemas MAXIMO,GQMMGR..
DBlinks are GQMFOF,MAXFOFNC..
Can anyone help me while writing the above query...
Regards,
gr.

A question was asked in your other thread. But the problem was you dint care to give an answer.
Dont open duplicate post.
I need help on the below problem..

Need help on a sql query

Hi Friends,
I am trying to load Employees and their Assignments using APIs.
I have various columns in my staging table like Last Name, First Name, etc., but I need help in writing query in the cursor especially for columns Emp Number and Supervisor Number.
I have data as below
Emp_Number     Supervisor_Number
GE0002               GE0064
GE0064               EG0009
EG0009               EG0001
100009                EG0001
EG0001               TU0001
Cursor I write will process the data in the same order as above, but here the problem is...
When it processes first row, it checks for supervisor GE0064 which do not exist and so it errors out.
Similarly for second row, it checks for supervisor EG0009 which again do not exist and so it errors out.
So in order to prevent this, the cursor should process the rows as below
Emp_Number     Supervisor_Number
EG0001               TU0001
EG0009               EG0001
GE0064               EG0009
GE0002               GE0064
100009                EG0001
By this way, Supervisor should be defined first as an employee and then it can be used as a supervisor for other employees
is there a way that I can get the output as above(second set of data), when the table has records randomly as above(first set of data)
Appreciate your help!
Thanks,
Srikanth

Srikanth wrote:
... but the number of records returned by above query are lot more than number of records in the table.
Why did the number go up?
It's something only you can find out
Maybe some Emp have several Supervisor(s) like
with
t as
(select 'GE0002' Emp,'GE0064' Supervisor from dual union all
select 'GE0064','EG0009' from dual union all
select 'EG0009','EG0001' from dual union all
select 'GE0064','100009' from dual union all
select '100009','EG0001' from dual union all
select 'EG0001','TU0001' from dual
select Emp,Supervisor,lpad('_',3 * (level - 1),'_')||Emp indent
from (select Emp,Supervisor
          from t
        union all
        select supervisor,null
          from t tt
         where not exists(select null
                            from t
                           where emp = tt.supervisor
start with Supervisor is null
connect by prior Emp = Supervisor
EMP
SUPERVISOR
INDENT
TU0001
TU0001
EG0001
TU0001
___EG0001
100009
EG0001
______100009
GE0064
100009
_________GE0064
GE0002
GE0064
____________GE0002
EG0009
EG0001
______EG0009
GE0064
EG0009
_________GE0064
GE0002
GE0064
____________GE0002
Regards
Etbin

Need help tuning slow running query

Need help tuning below two Oracle queries:
Query #1:
======================
SELECT "WORK_ORDER_FACT_ALL_YESTERDAY"."WORK_ORDER_HISTORY_ID",
"WORK_ORDER_FACT_ALL_YESTERDAY"."ACCOUNT_NUMBER",
"ACCOUNT_DIM"."ACCOUNT_NUMBER", "ACCOUNT_DIM"."ACCOUNT_WS_DISC_DATE"
FROM "CDWD"."WORK_ORDER_FACT_ALL_YESTERDAY" "WORK_ORDER_FACT_ALL_YESTERDAY",
"CDWD"."ACCOUNT_DIM" "ACCOUNT_DIM"
WHERE (SUBSTR ("WORK_ORDER_FACT_ALL_YESTERDAY"."ACCOUNT_FIRST_NAME", 1, 1) =
SUBSTR ("ACCOUNT_DIM"."ACCOUNT_FIRST_NAME", 1, 1)
AND (SUBSTR ("WORK_ORDER_FACT_ALL_YESTERDAY"."ACCOUNT_LAST_NAME", 1, 4) =
SUBSTR ("ACCOUNT_DIM"."ACCOUNT_LAST_NAME", 1, 4)
AND ("WORK_ORDER_FACT_ALL_YESTERDAY"."ACCOUNT_DL_NUMBER" =
"ACCOUNT_DIM"."ACCOUNT_DL_NUMBER"
AND "WORK_ORDER_FACT_ALL_YESTERDAY"."WO_TYPE_CODE" IN ('25', '27')
AND ("ACCOUNT_DIM"."REVENUE_TYPE_ID" = 1)
AND ("WORK_ORDER_FACT_ALL_YESTERDAY"."TRANSFER_COUNT" = 0)
AND ("WORK_ORDER_FACT_ALL_YESTERDAY"."WINBACK_ADD_COUNT" = 0)
AND ("ACCOUNT_DIM"."ACCOUNT_WS_ENTRY_DATE" <
(TO_DATE ('2006.05.02', 'yyyy.mm.dd') - 11
AND ("WORK_ORDER_FACT_ALL_YESTERDAY"."IS_DERIVED" = 0)
AND ("ACCOUNT_DIM"."EXPIRATION_DATE" IS NULL)
AND ("WORK_ORDER_FACT_ALL_YESTERDAY"."ACT_ACCOUNT_TYPE_CD" <> '50');
Query #2
==================
UPDATE work_order_fact_all_yesterday g
SET returns_count = 1
WHERE EXISTS (SELECT 1
FROM (SELECT a.phone_dim_key AS transactional_phone_dim_key,
b.mdn_number AS transactional_mdn_number,
b.account_number AS transactional_account_number
FROM work_order_fact_all_yesterday a INNER JOIN phone_dim b ON a.phone_dim_key = b.phone_dim_key
WHERE a.gross_deactivations_count = 1) e
INNER JOIN (SELECT c.phone_dim_key AS historical_phone_dim_key,
d.mdn_number AS historical_mdn_number,
d.account_number AS historical_account_number
FROM (SELECT phone_dim_key
FROM work_order_activity_fact
WHERE gross_adds_count = 1
AND report_date >= :b1 - 66
AND NVL (is_derived, 0 ) = 0
UNION
SELECT phone_dim_key
FROM work_order_fact_all_yesterday
WHERE gross_adds_count = 1
AND is_derived = 0) c
INNER JOIN phone_dim d ON c.phone_dim_key = d.phone_dim_key ) f
ON e.transactional_mdn_number = f.historical_mdn_number
AND e.transactional_account_number = f.historical_account_number
WHERE e.transactional_phone_dim_key = g.phone_dim_key)
AND g.gross_deactivations_count = 1
AND g.account_revenue_type_id = 1;
I ran the DBMS_SQLTUNE on it for 10g and did not get any advice. How can I tune the above queries? Thanks!

Tune the SQL? Looking at the join criteria of SUBSTR("WORK_ORDER_FACT_ALL_YESTERDAY"."ACCOUNT_FIRST_NAME", 1, 1) = SUBSTR ("ACCOUNT_DIM"."ACCOUNT_FIRST_NAME", 1, 1) and other substrings, it seems to me that you have basic flaws in your relation design.
Column must be atomic values. Having to extract a sub-set value from a column to create the intelligence needed to join to another table - that is just plain wrong in relation design. Never mind the performance impact and overheads it causes in the database.

Need help in writing the query

The initial data is as follows:
ID PARENT_ID
=============
1 NULL
2 NULL
3 2
4 6
5 3
6 7
7 4
8 NULL
but output is as follows in such way that Parent_Id should be displayed in ID place
ID PARENT_ID
=============
1 NULL
2 NULL
3 2
8 NULL
6 8
4 6
5 3
7 4
Can any one help how resolve this query?
Thanks in advance

Your output is inconsistent with initial data :) But
select * from t start with parent_id is null connect by parent_id = prior id;

Need help in developing a query

Similar Messages

Maybe you are looking for