Need help in personnel development

Could some one explain me what are the personnel development infotypes (PD).

Please post your question here
SAP ERP Human Capital Management (SAP ERP HCM)
Thanks,
Prasath N

Similar Messages

  • Need help with interface development

    Hi i need help with requirement below with developing interface between or online order system and sap plz lemme know what is bapi i use for creating customer, update and assigining partner id to costumer.
    SAP Development
    1.     Using standards SAP functional module (with BAPI), create interface that will create/change Ordering party customer in SAP. Following fields are mandatory for customer creation:
    •     MANDT     Client
    •     VKORG     Sales organization
    •     VTWEG     Distribution Channel
    •     SPART     Division
    •     KDGRP     Customer Group (= “ZORP)
    •     KUNNR     Customer number
    •     NAME1     Name 1
    •     NAME 2     Name 2 (if required)
    •     SORTL     Search term (short description)
    •     ZZALTKN     Search term 2 (old customer number)
    •     LAND1     Country
    •     ORT01     City
    •     PSTLZ      Zip Code
    •     REGIO      Region (state in USA)
    •     STRAS     Street
    •     TELF1     Primary telephone number
    •     TELFX     Primary Fax number
    •     ZZPRPLANS     Payment Plan
    •     CCINS     Payment card: Card type
    •     CCNUM     Payment cards: Card number
    •     CCDEF     Payment Card: Default Card Indicator
    •     ZBDGID     Customer Budget ID
    •     ZHOLD     Budget Hold indicator
    •     ZZCOSTCENT     Cost Center
    2.     Upon successful customer creation system will issues “S” (success) message that customer has been created.
    3.     New ordering party customer created in step ½, will have to be assigned as new partner to its belonging Sold-to/Ship-to customer. Use standard SAP customer functional module in order to perform this partner ID assignment. Partner ID for ordering party should be “ZO”.
    1.7     Enhancement Functionality
    Apart from creating a new interface to do the required functionality, the Order Create Interface also has to be changed to accommodate a field to pass the Ordering Party Number on the Order. The technicalities of how we are going to implement the interface will be laid out in the Tech Specs.
    Thanks
    in advance

    You have double posted, please mark this one as "solved on my own" and refer to this thread
    need help with interface development
    Regards,
    Rich Heilman

  • Need help in personnal development

    Could some one explain me what are the personnel development infotypes (PD).

    All personnel development/OM tables start with HRP and infotype (e.g. 1000) behind it. 
    Use transaction se11...type in HRP* and you will have most of the HR transaparent Tables.To access them look for RP_read_* and RP_provide* in Table TRMAC to read a infotype or use the 'select' statement to access the Transparent table. 
    <b>some of the personnel development infotypes  Table's  are  :</b>
    HRP1000                        Infotype 1000 DB Table
    HRP1001                        Infotype 1001 DB Table
    HRP1001_ARCH                   Infotype 1001: Inverse Relations
    HRP1002                        Infotype 1002 DB Table
    HRP1003                        Infotype 1003 DB Table
    HRP1004                        Infotype 1004 DB table
    HRP1005                        DB Table for Infotype 1005 (Plan
    HRP1006                        Infotype 1006 DB table
    HRP1007                        Infotype 1007 DB Table
    HRP1008                        Infotype 1008 DB Table
    HRP1009                        Infotype 1009 DB table
    HRP1010                        Infotype 1010 DB table
    HRP1011                        Infotype 1011 DB Table
    HRP1013                        Infotype 1013 DB Table
    HRP1014                        Infotype 1014 DB Table
    HRP1015                        Infotype 1015 DB table
    HRP1016                        Infotype 1016 DB Table
    HRP1017                        Infotype 1016 DB Table
    HRP1018                        DB Table for Infotype 1018 Cost
    HRP1019                        DB Table for Infotype 1019 Requi
    HRP1020                        Infotype 1020 DB table
    HRP1021                        INFOTYPE 1021 DB TABLE
    HRP1023                        Infotype 1023 DB table
    HRP1024                        INFOTYPE 1024 DB TABLE
    HRP1025                        INFOTYPE 1025 DB TABLE
    HRP1026                        Infotype 1026 DB table
    reward points if it is usefull ..
    Girish

  • Need help on JSF Development

    Hi guys,
    I've been used to create web applications by using JSP and Servlet technologies as well as NetBeans 5.5 for business classes development and Dreamwaver for visual web pages development.
    So far so good, however, from now on, due to customer requirements, some new small projects must be created by using JSF technologies.
    I've already read both JavaServer Faces in Action book from cover to cover and J2EE 1.4 Tutorial chapters which covers JSF, so that I could gain a good understanding and knowledge regarding commmon things needed to start developing by using JSF.
    The problem which I need your help guys is regarding which tools you "JSF Developers" use to create your web applications.
    Althrough Dreamwaver is a great tool for visual html formatting and I'm very used to, I found very painful to replace the common html tags by the jsf tags right after the page layout is done.
    I would like to include such jsf tags in the first time I design the web page layout instead of first develop the page layout and then replace the html tags.
    Maybe Facelets could help but I have no knowledge on how to use it. Could you please clarify ?
    Trying to solve such problem, I gave a try to NetBeans Visual WEB Pack but I found it poorer than Dreamwaver for page layout design.
    What you guys have been using to create your JSF applications.
    Could you please give me some light on this ?
    Thanks in advance.

    The problem which I need your help guys is regarding
    which tools you "JSF Developers" use to create your
    web applications.Developers team use Eclipse JBoss IDE.
    Designers team use Dreamweaver and Eclipse WTP.
    Althrough Dreamwaver is a great tool for visual html
    formatting and I'm very used to, I found very painful
    to replace the common html tags by the jsf tags right
    after the page layout is done.Use Facelets to make some templates.
    Maybe Facelets could help but I have no knowledge on
    how to use it. Could you please clarify ?Google it , read some tutorials.
    Cya.

  • Need help to reset develop defaults

    When I import photos the develop module applies a default setting of sharpness 25 and lumanace 20. I would like to change those defaults but don't remember how.
    Thanks for your help,
    Ed

    You save a preset with the ones you want and apply it to all you want and/or on import.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • I Need Help in SDK Development

    hi all,,
    I'm .Net Developer but i'm new in SDK, i have many issues in add-ons development because i can't find good references,any one can help me please ??

    B1 questions should go here please:
    SAP Business One Application
    - Ludek

  • Need help from SQL Developer users

    I’d like to run Decision Tree models in SQL Developer for monthly predications after running in ODM manually.
    I created PL/SQL Packages under Tools from ODM, and compiled them in SQL Developer successfully. According to Oracle documents, I should be able to run the same DT models (using create or replace PACKAGE BODY "DATAMININGACTIVITY1" .......). However, I am unable to run the entire “Package Body” or any part of it. One of the error messages shows "The select program is in an invalid state for running". I also tried to use "Call" to call functions to run my SQL Package, but that didn't work either. So far, the only SQL works for me is to create a view from a table.
    Please share how you use SQL to run models. Thanks, DC

    In PL/SQL Block you will see something like below.
    In the most simple case you need to supply to arguments ( see bold )
    CASE_TABLE := *'YOUR_TABLE_NAME_FOR_MODEL_BUILD'*;
    MODEL_NAME := *'MODEL_NAME_FOR_YOUR_NEW_MODEL';*
    That would be enough to build a model.
    Thanks,
    Jim
    DECLARE
    CASE_TABLE VARCHAR2(200);
    ADDITIONAL_TABLE_1 VARCHAR2(200);
    MODEL_NAME VARCHAR2(200);
    CONFUSION_MATRIX_NAME VARCHAR2(200);
    LIFT_RESULT_NAME VARCHAR2(200);
    ROC_RESULT_NAME VARCHAR2(200);
    TEST_METRIC_NAME VARCHAR2(200);
    FEATURE_TABLE VARCHAR2(200);
    MAPPING_TABLE VARCHAR2(200);
    DROP_OUTPUT BOOLEAN;
    BEGIN
    CASE_TABLE := *'YOUR_TABLE_NAME_FOR_MODEL_BUILD'*;
    ADDITIONAL_TABLE_1 := NULL;
    MODEL_NAME := *'MODEL_NAME_FOR_YOUR_NEW_MODEL';*
    CONFUSION_MATRIX_NAME := NULL;
    LIFT_RESULT_NAME := NULL;
    ROC_RESULT_NAME := NULL;
    TEST_METRIC_NAME := NULL;
    FEATURE_TABLE := NULL;
    MAPPING_TABLE := NULL;
    DROP_OUTPUT := NULL;
    DATAMININGACTIVITY1.DT_1428168079_BA(
    CASE_TABLE => CASE_TABLE,
    ADDITIONAL_TABLE_1 => ADDITIONAL_TABLE_1,
    MODEL_NAME => MODEL_NAME,
    CONFUSION_MATRIX_NAME => CONFUSION_MATRIX_NAME,
    LIFT_RESULT_NAME => LIFT_RESULT_NAME,
    ROC_RESULT_NAME => ROC_RESULT_NAME,
    TEST_METRIC_NAME => TEST_METRIC_NAME,
    FEATURE_TABLE => FEATURE_TABLE,
    MAPPING_TABLE => MAPPING_TABLE,
    DROP_OUTPUT => DROP_OUTPUT
    END;
    Edited by: jdadashev on Mar 12, 2010 9:08 AM

  • Need help with method development

    I want to stop the takeInput method when the user enters -1. But the way it is currently written, it just continues to repeat, and I can't figure out why. What needs to be changed?
    import java.util.*;
    public class Appt
         public static Scanner kb = new Scanner(System.in).useDelimiter("\n");
         public static String start,end,event;
         public static void main(String args[])
              while(takeInput() == true)
              takeInput();
         public static void enterAppt(String start, String end, String event)
         public static boolean takeInput()
              String stopVar = "-1";
              System.out.println("To finish entering appointments, type -1");
              System.out.println("Enter a start time:");
              start = kb.next();
              if(start == stopVar) return false;
              System.out.println("Enter an end time:");
              end = kb.next();
              if(end == stopVar) return false;
              System.out.println("Enter an event:");
              event = kb.next();
              if(event == stopVar) return false;
              return true;
    }Edited by: Jago6060 on Apr 20, 2008 11:46 PM

    Use equals, not == to compare objects' states, including Strings' contents.
    Also, you're getting user input twice for every pass through the loop. Also, you don't need "== true". Also, why is takeInput public?
    while(takeInput() == true) // once
              takeInput(); // twice
              }You could just do
    while (takeInput());However, that's not the normal way to do it. Rather, takeInput would be something like
    private static void takeInput() {
      boolean done = false;
      while (!done) {
        get the input
        if it's -1, done = true;
    }Also, if you go through the loop 5 times, you'll still only have one appointment. You'll just change it 5 times. If you want to create appointments, you need to make start, end, and event non-static, and create a new Appt object each time through the loop.
    [http://java.sun.com/docs/books/tutorial/java/concepts/index.html]
    [http://java.sun.com/docs/books/tutorial/java/javaOO/index.html]

  • Need help with installing Developer (Forms and Reports)

    During installation the installer complains that I will need to stop any services that are trying to access Oracle Dlls. I can't seem to find what services are trying to use the dlls. The problem occurs at install stage when copying "core40.dll" and "NL80.dll". I am unable to complete the installation because of this.
    It also claims that I can use a program called "oradim80.exe" to stop these services, but it does not appear to be on any of my disks.

    Rave,
    Thanks for the reply.
    I have looked at those permissions and either set them or confirmed to myself that they were correct at least 4 times in this crusade so far.
    I did find a folder named SLStore_v1 which appears to be empty. Anything there? Should the 2 folders where permissions were set have contents?
    I am, currently, re-downloading PSCC. It is going very slowly. I'll see what happens when that is complete or has failed as it has times in the past.
    Does the downloading need to happen when I have invoked the Root User? Or, is it the running and set up that's important there?
    Jerry

  • Need help with SQL developer settings

    Hi Folks,
    I am trying to access a schema via a user (with read-only privilages). What this means is that off the command line interface, I have to pre-qualify all my tables using the schema name. E.g. desc schema_name.table_1 etc.
    When I connect to the schema via SQL developer, I do not see any tables. Are there any settings in the SQL developer that will automatically add the pre-qualifier before each table ?
    BTW, I am using Oracle SQL Developer version 2.1.1.64 and my database is 10g.
    Thanks in advance
    rogers42

    The Tables node only lists your own tables. For others' objects, use the Other Users node.
    Alternatively, you can assign synonyms to other users' objects to list them in your own tree.
    Have fun,
    K.

  • I need help as a developer. Invalid binary itunes connect.

    So I published apps through application loader.
    I got a thing saying something about 64 bit and I clicked next. My app is in prerelease saying that it has a invalid binary. What does that mean?
    So I published a version 2 and it is some sort of beta testing review testflight thing.
    What does invalid binary status do and mean?

    YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.

  • Need help in J2EE developement

    I am new to J2EE. I have installed Sun Java(TM) Studio Enterprise 8,but I don't know where to write applications and how to run them,moreover I tried to install Java Web server 6.1,but getting some error. Will anybody guide me how to write and run J2EE applications.

    Hi,
    what you may want to read is the following:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
    skip the parts of XML parsing, soap etc.
    To get started, read the parts about servlets, JSPs, EJBs etc
    Chapter 1, 3
    Chapter 11 to 14
    Chapter 22-29
    This may be a good introduction considering the concepts of J2EE and building applications. Don't expect to program superb applications after this; keep on looking in the internet there are many tutorials around, just use google ;-)
    In order to run your applications you may install (free) J2EE Servers like
    Tomcat (supporting JSPs and Servlets, no EJBs)
    JBoss (supporting EJBs)
    Hope to will get into this,
    Kai

  • Need help with almost completed plugin engine project

    Hi all,
    For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
    What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
    Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
    Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
    Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
    The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
    I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
    Look forward to some replies.

    Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
    On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

  • Need help to develop Pythagoras theorem-

    Hi i need help to develop proofs 2,3,4
    of pythagoras theorems in java as demonstrations
    These are applets can anyone help me with it or give me an idea of how to go about developing it -
    the site is the following
    http://www.uni-koeln.de/ew-fak/Mathe/Projekte/VisuPro/pythagoras/pythagoras.html
    then double click on the screen to make it start

    Pardon my ASCII art, but I've always liked the following, simple, geometric proof:
         a                   b
    ---------------------------------------+
    |       |                                |
    a|   I   |              II                |
    |       |                                |
    ---------------------------------------+
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    b|  IV   |              III               |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    |       |                                |
    ---------------------------------------+It almost goes without saying that I+II+III+IV == (a+b)^2, and II == IV == a*b,
    I == a*a and III == b*b, showing that (a+b)^2 == a^2+a*b+a*b+b^2.
    I hope the following sketch makes sense, stand back, ASCII art alert again:     a                   b
    ---------------------------------------+
    |               .             VI         |
    |     .                 .                |a
    | V                               .      |
    |                                        +
    |                                        |
    |   .                                    |
    b|                                     .  |
    |                                        |
    |                  IX                    |
    | .                                      |
    |                                    .   |b
    |                                        |
    +                                        |
    |      .                                 |
    a|               .                  . VII |
    |  VIII                   .              |
    ---------------------------------------+
                     a                    bThe total area equals (a+b)^2 again and equals the sum of the smaller areas:
    (a+b)^2 == V+VI+VII+VIII+IX. Let area IX be c^2 for whatever c may be.
    V+VII == VI+VIII == a*b, so a^2+b^2+2*ab= c^2+2*a*b; IOW a^2+b^2 == c^2
    Given this fundamental result, the others can easily be derived from this one,
    or did I answer a question you didn't ask?
    kind regards,
    Jos

  • Need help to develop a custom connector

    I need some help on developing the custom connector to Homegrown application and the version i am using is OIM9.0.3
    First of all what are the steps do we need to care while developing a custom connector.
    I can't able to find the process in google to develop the custom connector.
    If you have any data regarding the development of custom connector, plz share to me....
    What are the thing do we need to take care while developing the connector.
    I referred in OIM9.1 version there was an option to develop the Custom connector by using Genric technology, can we create the custom connector by using the GTC feature in OIM 9.1
    early response will be appreciated

    The docs for the new GTC framework are here: http://download.oracle.com/docs/cd/E10391_01/doc.910/e10360/about.htm#Toc153968019. GTC is useful if you target application exposes standards-based SPML (Service Provisioning Markup Language) user management interfaces, although it sounds like this isn't the case for you.
    You will most likely need to go the traditional route in terms of connector development, which involves building OIM Process Task Adapters to invoke the application API's (I assume they're Java?) and invoking those adapters from within an OIM Provisioning Process.
    Rob

Maybe you are looking for