Need help in query to display lot and serial numbers for a Wip Job Component
Hi ALL,
I have a requirement as below.
I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
Thanks
Thank you for replying Gordon. I did not remember I had asked this before. I no longer have access to the other account.
What I need on the query is that I want a list of items with the on order quantity and when we are expecting this order to be received. The receiving date is based on the PO delivery date. The trick here is that I need to Master sku to show the delivery date of the component sku. In my scenario all components have the same delivery date for the Master sku. If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
Let me know if this is possible and if yes please guide towards a query for it.
Thank you.
Similar Messages
-
Re-load OS and serial numbers for apps are missing
I had to reinstall my OS and it seems all my applications are asking for my serial numbers. I unfortunately installed and put my previous system in a separate folder. I moved all my programs back but I suppose the serial numbers are stored in Library somewhere. Any help?
I finally got my email back running again and think I have recovered all of my emails, although all of my sent emails are someplace else. I think it may have put them in the junk folder. I also have about 10 or 12 blank emails that have the date my email was down but although I highlight them and say to trash they are still showing up in same place. But now if I highlight one the button says undelete. This seems strange.Application serial numbers are often stored in preference files in the user's library, not in the system folders.
-
Need help in query to display dates as start, end dates
Hi,
I am trying the following output from the below table structure, data
StartDAte Endate Reason duration
12-02-09 12:00:00 12-02-09 13:10:20 planned activity 1:10:20
01-04-09 08:30:34 01-04-09 15:00:20 planned activity 6:30:34
12-04-09 17:10:45 12-04-09 17:11:04 unplanned activity 0.10
23-05-09 22:00:11 23:05-09 22:15:09 planned activity 0.15
Mdate Reason omode host
12-02-09 12:00:00 planned activity st 366
12-02-09 13:10:20 planned activity ed 366
01-04-09 08:30:34 planned activity st 366
01-04-09 15:00:20 planned activity ed 366
12-04-09 17:10:45 unplanned activity st 366
12-04-09 17:11:04 unplanned activity ed 366
23-05-09 22:00:11 planned activity st 366
23:05-09 22:15:09 planned activity ed 366
i tried with individual query but not able to get the output in combined way of start, end dates together with calculation of time difference, i tried using case options but not successful in resolve it.
select to_char(mdate,'dd-mm-yyyyy hh24:mi:ss')startdate, reason
from date_md where omode like 'st'
order by o_char(mdate,'dd-mm-yyyyy hh24:mi:ss')startdate;
select to_char(mdate,'dd-mm-yyyyy hh24:mi:ss')enddate, reason
from date_md where omode like 'ed'
order by o_char(mdate,'dd-mm-yyyyy hh24:mi:ss')enddate;
any suggestions on type of query should be used is welcomed.Or maybe
SQL> WITH t AS (SELECT TO_DATE ('12-02-09 12:00:00',
'DD-MM-YY HH24:MI:SS')
event_date,
'planned activity' activity,
'st' start_end,
366 HOST
FROM DUAL
UNION ALL
SELECT TO_DATE ('12-02-09 13:10:20',
'DD-MM-YY HH24:MI:SS'),
'planned activity',
'ed',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('01-04-09 08:30:34',
'DD-MM-YY HH24:MI:SS'),
'planned activity',
'st',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('01-04-09 15:00:20',
'DD-MM-YY HH24:MI:SS'),
'planned activity',
'ed',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('12-04-09 17:10:45',
'DD-MM-YY HH24:MI:SS'),
'unplanned activity',
'st',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('12-04-09 17:11:04',
'DD-MM-YY HH24:MI:SS'),
'unplanned activity',
'ed',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('23-05-09 22:00:11',
'DD-MM-YY HH24:MI:SS'),
'planned activity',
'st',
366
FROM DUAL
UNION ALL
SELECT TO_DATE ('23-05-09 22:15:09',
'DD-MM-YY HH24:MI:SS'),
'planned activity',
'ed',
366
FROM DUAL)
SELECT MIN (event_date) startdate,
MAX (event_date) enddate,
MAX (activity) reason,
NUMTODSINTERVAL (MAX (event_date) - MIN (event_date),
'day')
duration
FROM t
GROUP BY TRUNC (event_date)
STARTDATE ENDDATE REASON DURATION
23.05.2009 22:00:11 23.05.2009 22:15:09 planned activity +00 00:14:57.999999
12.02.2009 12:00:00 12.02.2009 13:10:20 planned activity +00 01:10:19.999999
01.04.2009 08:30:34 01.04.2009 15:00:20 planned activity +00 06:29:45.999999
12.04.2009 17:10:45 12.04.2009 17:11:04 unplanned activity +00 00:00:18.999999
4 rows selected. -
Need help finding a BIOS flash tool and BIOS updates for HP Compaq nc8230 running Windows 7
I put together this laptop. It didnt come with a hardrive, and basically I installed everything from the ground up.
It is an HP Compaq nc8230, IDE Hard drive, Windows 7 32 bit. The BIOS on it is the original one. I've searched far and wide, but to no avail, it seems there's zero support for this model anymore.
Basically it was never intended to go beyond Vista, back in 2004 when this model was introduced.
The reason I am searching for some kind of BIOS update, whether it is BIOS or SMBios is to get the ACPI driver to recognize the primary laptop battery. This is crucial: it only sees both as the travel battery. Other than that, all else is fine.Hi:
Here is the latest BIOS update for your notebook.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
You cannot use the windows based flash because you installed windows 7, so I provided the link to the DOS based flash.
You need to use a USB floppy drive for this update.
Oh, and the card reader won't work unless you install this updated driver which is not on your PC's support and driver page.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Also, here is the link to your PC's support and driver page...
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=321957&prodSeries... -
Hi,
How can i create Batches and Serial numbers for a item in inventory in SAP B1Hi Sudha,
One of my ckient he purchases Raw Material and converts it into finished good and he want to know the cost which occurs in the process of production and where he can see that in SAP B1 and after it is converted into Finished Good it takes some time to be sold and at that time where can he chek his inventory level .
I think in SAP B1 if we enter a item as a raw material it will be shown as raw material till the time it is sold .
Can u plz help me out in this how should i map his process in SAP B1 is that possible or not.
Regards
Naveen.G -
Need help with query joining several tables into a single return line
what i have:
tableA:
puid, task
id0, task0
id1, task1
id2, task2
tableB:
puid, seq, state
id0, 0, foo
id0, 1, bar
id0, 2, me
id1, 0, foo
id2, 0, foo
id2, 1, bar
tableC:
puid, seq, date
id0, 0, 12/21
id0, 1, 12/22
id0, 2, 12/22
id1, 0, 12/23
id2, 0, 12/22
id2, 1, 12/23
what i'd like to return:
id0, task0, 12/21, 12/22, 12/22
id1, task1, 12/23, N/A, N/A
id2, task2, 12/22, 12/23, N/A
N/A doesn't mean return the string "N/A"... it just means there was no value, so we don't need anything in this column (null?)
i can get output like below through several joins, however i was hoping to condense each "id" into a single line...
id0, task0, 12/21
id0, task0, 12/22
id0, task0, 12/23
id1, task1, 12/23
is this possible fairly easily?
Edited by: user9979830 on Mar 29, 2011 10:53 AM
Edited by: user9979830 on Mar 29, 2011 10:58 AMHi,
Welcome to the forum!
user9979830 wrote:
what i have:...Thanks for posting that so clearly!
Whenever you have a question, it's even better if you post CREATE TABLE and INSERT statements for your sample data, like this:
CREATE TABLE tablea
( puid VARCHAR2 (5)
, task VARCHAR2 (5)
INSERT INTO tablea (puid, task) VALUES ('id0', 'task0');
INSERT INTO tablea (puid, task) VALUES ('id1', 'task1');
INSERT INTO tablea (puid, task) VALUES ('id2', 'task2');
CREATE TABLE tablec
( puid VARCHAR2 (5)
, seq NUMBER (3)
, dt DATE -- DATE is not a good column name
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 0, DATE '2010-12-21');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 1, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id0', 2, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id1', 0, DATE '2010-12-23');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 0, DATE '2010-12-22');
INSERT INTO tablec (puid, seq, dt) VALUES ('id2', 1, DATE '2010-12-23');This way, people can re-create the problem and test their ideas.
It doesn't look like tableb plays any role in this problem, so I didn't post it.
Explain how you get the results from that data. For example, why do you want this row in the results:
PUID TASK DT1 DT2 DT3
id0 task0 12/21/2010 12/22/2010 12/22/2010rather than, say
PUID TASK DT1 DT2 DT3
id0 task0 12/22/2010 12/21/2010 12/22/2010? Does 12/21 have to go in the first column because it is the earliest date, or is it because 12/21 is related to the lowest seq value? Or do you even care about the order, just as long as all 3 dates are shown?
Always say what version of Oracle you're uisng. The query below will work in Oracle 9 (and up), but starting in Oracle 11, the SELECT ... PIVOT feature could help you.
i can get output like below through several joins, however i was hoping to condense each "id" into a single line... Condensing the output, so that there's only one line for each puid, sounds like a job for "GROUP BY puid":
WITH got_r_num AS
SELECT puid
, dt
, ROW_NUMBER () OVER ( PARTITION BY puid
ORDER BY seq -- and/or dt
) AS r_num
FROM tablec
-- WHERE ... -- If you need any filtering, put it here
SELECT a.puid
, a.task
, MIN (CASE WHEN r.r_num = 1 THEN r.dt END) AS dt1
, MIN (CASE WHEN r.r_num = 2 THEN r.dt END) AS dt2
, MIN (CASE WHEN r.r_num = 3 THEN r.dt END) AS dt3
, MIN (CASE WHEN r.r_num = 4 THEN r.dt END) AS dt4
FROM tablea a
JOIN got_r_num r ON a.puid = r.puid
GROUP BY a.puid
, a.task
ORDER BY a.puid
;I'm guessing that you want the dates arranged by seq; that is, for each puid, the date related to the lowest seq comes first, regardless of whther that date is the earliest date for that puid or not. If that's not what you need, then change the analytic ORDER BY clause.
This does not assume that the seq values are always consecutive integers (0, 1, 2, ...) for each puid. You can skip, or even duplicate values. However, if the values are always consecutive integers, starting from 0, then you could simplify this. You won't need a sub-query at all; just use seq instead of r_num in the main query.
Here's the output I got from the query above:
PUID TASK DT1 DT2 DT3 DT4
id0 task0 12/21/2010 12/22/2010 12/22/2010
id1 task1 12/23/2010
id2 task2 12/22/2010 12/23/2010As posted, the query will display the first 4 dts for each puid.
If there are fewer than 4 dts for a puid, the query will still work. It will leave some columns NULL at the end.
If there are more than 4 dts for a puid, the query will still work. It will display the first 4, and ignore the others.
There's nothing special about the number 4; you could make it 3, or 5, or 35, but whatever number you choose, you have to hard-code that many columns into the query, and always get that many columns of output.
For various ways to deal with a variable number of pivoted coolumns, see the following thread:
PL/SQL
This question actually doesn't have anything to do with SQL*Plus; it's strictly a SQL question, and SQL questions are best posted on the "SQL and PL/SQL" forum:
PL/SQL
If you're not sure whether a question is more of a SQL question or a SQL*Plus question, then post it on the SQL forum. Many more people pay attention to that forum than to this one. -
Need Help to query Lync Database for User Information
Need Help to Query the lync database to retrieve below user information.
1. SIP Address of the registered user
2. Phone Number configured to the particular account.
3. IP Address
4. Last Logged in time.
I am trying to pull the above information from rtc database for all the registered users. Please let me know if this is possible and it would be great if you can throw some light on what tables to look for the data. Thank You.Hi,
For SIP address and Phone number you can check RTC database.
IP Address:
You can refer to the link below to query IP address:
http://h30499.www3.hp.com/t5/Business-Service-Management-BAC/Monitoring-Lync-with-the-User-Registrations-Viewer-Free-NMC-tool/ba-p/5961497#.UtOU43mIrwo
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Last Logged in time:
You can refer to the link below:
http://blogs.technet.com/b/dodeitte/archive/2011/05/11/how-to-get-the-last-time-a-user-registered-with-a-front-end.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Need help my window is in thai and i dont understand at all.how to convert to english?
need help my window is in thai and i dont understand at all.
how to convert to english? i been trying for days but still cannot change it.
because i cannot read thai..please help me step by step..
my pc is touchsmart 9100 windows 7 professional.
Not a single word is in english if i go to 'region and language' to change it.
Everthing is in thai in the system.
This question was solved.
View Solution.Hi,
OK. That means the default display lange of the OS is Thai. That is what was purchased.
You can try downloading and using the language appropriate LIPS (language interface package software) from Microsoft to change the display language.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore -
Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......
need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks
Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I have tried everything I know to retrieve the iPhoto Library app. I detest this new Photo app, which obviously wasn't designed with photographers in mind. I desperately need help in retrieving the old app and have not been able to do it so far. I have gone to my app folder and tried to update my iPhoto Library. I have gone to my trash and brought it over to my desktop and still cannot use it. Please help!
Try this fix discovered by User photosb189:
From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
Select Library from the drop down menu
Then navigate to Application Support > iLifeAssetManagement > assets
Right click on the 'sub' folder and choose Compress
Drag the resulting zip file to your Desktop (as a backup)
Go to your System Preferences and choose iCloud
Turn OFF the iCloud Photos option
Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
Now, in System Preferences, turn the iCloud Photos option ON
iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto. -
I Need help. I Change My Number and now imessage don t work.
I Need help. I Change My Number and now imessage don t work.
Hi Ivonka88,
Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers!
- Ari -
I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events. -
I need help quick please sold the iPod and before handing it over wanted to clear out info so pushed erase now there is only a plug icon for iTunes but it won't now recognize my computer what can I do??
Try
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Need help on transportable tablespace, after convert and move datafile over
I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?
Maybe you are looking for
-
The program in question was implemented as a Java applet that runs in a browser. The developer says it must run under the Java Console and that I cannot run more than one copy of it in a given browser technology (e.g., Firefox); but I can run multipl
-
How to block invoice posting for quality reasons
how to block invoice posting for quality reasons.For example while doing Goods receipt the material is posted to quality inspection stock. Then the material is rejected for some reasons. Once the decision is made then the standard system allows t
-
Search criteria drop down not working in CRM 7.0 Web UI for few users.
Hi Gurus, i have come across problem in sap CRM 7.0 web ui, it goes here.... when a user opens a webui page and goes to "account management" work center page under "search" work center link group... he selects "accounts"(or contacts or account plan).
-
Please - any solutions to question below?
After converting a pdf doc to Word, it says "unable to download" ...7-6e66-4faa-94fo-d98b3f2cf6a2 from files.acrocomcontent.com. Any suggestions?
-
Hi, we removed some archive logs and after that we have this error message in RMAN backup report : RMAN-03002: failure of backup command at 11/07/2006 14:27:51 RMAN-06059: expected archived log not found, lost of archived log compromises recoverabili