Need help migrating users from dead 10.4.0 server to 10.5.8 server

Hello,
We have an ancient xserv (G4, SCSI drives I think) that was running 10.4.0 server, serving http, AFP and SMB, and doing the streaming for the college radio station to the internet(qt broadcaster was sending from another machine to this machine).
Apples recommended process for migration to a new machine is to first upgrade to 10.4.1 before exporting. However, the hard drive on this machine is as ancient as it is and the initial install process failed with an error, leaving the machine unbootable.
I used CCC to make a copy of the os to an identical drive, but this is not bootable either, nor can I sucessfully upgrade it to another version.
Is there some way to move all the config to the new server (MacPro running 10.5.8) without exporting from the old server, since this is not possible?
There are hundreds of users and user websites. I copied the websites over to the user folder and they are accessable but not by the original urls.
Thanks,
Joel

posted in wrong section sorry

Similar Messages

Migrate users from FND_USER to OID

We are planning to authenticate Oracle apps users against OID and have installed a 9iAS Portal 1.0.2.2.2 environment with 11.5.7 and OID for this purpose.
We need to migrate user information (username and password as a minimum) from FND_USER to OID. Is there a recommended way of doing this? Can the encrypted password in FND_USER be moved directly across to OID?
Any help much appreciated.

If your source and target servers can have access to each other use dipassistant utility to migrate all users with passwords to new server.
Use this article for details.
http://www.oracle.com/technology/obe/obe_as_10g/im/ads_import/import.htm

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Migrating User from MCS 7828 H3 to UCS C220

        Hi All
I wanted to can someone tell me what is the process for migrating users from a MCS 7828 to a UCS C220. A associate of mine called me about doing a migration from the MCS to the UCS series and he wants to know how does he get the users over to the new platform.Thanks in advance for the help and have a great day.

Hi Scooter817,
There are a few options depending on what the customer has today and what will be the end state. Below are the most common scenarios:
1st Scenario - Customer is on older SW releases (8.x, 7.x, etc..) on MCS server(s) without UCSS wanting to move to new SW releases (9.x) on UCS C220.    The most cost effective way is to buy $9 upgrade per user per application SKUs (ex. UPG-6K-ENH) with UCSS for 3 years. There is more information on the BE6K product page under the partner section around migrations BE6K Product Page - http://www.cisco.com/go/be6000
2nd Scenario - Customer is on older SW releases (8.x, 7.x, etc..) on MCS server(s) with UCSS wanting to move to new SW releases (9.x) on UCS C220.    Since they have UCSS, they can go to PUT with thier contract number request updated SW and licensing, then re-host licenses to the new server. PUT link: http://tools.cisco.com/gct/Upgrade/jsp/productUpgrade.jsp
3rd Scenario - Customer is on older SW releases (8.x) on MCS server(s) with or without UCSS wanting to move to same SW releases (8.x) on UCS C220.   They can re-host licensing to the new server via SWIFT. Here is the link to the process. https://tools.cisco.com/SWIFT/LicensingUI/lookupLicenseForRehost
Thanks
Blake

Need to restrict users from adding or modifying folders or reports

Requirement: Need to restrict users from adding or modifying folders or reports through Info view and to reflect the modifications only thriough LCM.
Issue: Customer wants to restrict users from adding or modifying existing reports from Infoview and need to force users to do make the changes through Life cycle manager tool.
As per my understanding LCM can only be used to to promote folders and objects from one environment to another and to schedule the promotion of these jobs on a daily basis.My query is:
Can we add or modify existing reports or folders using the LCM tool?
Could you please help me out in this issue and provide me your suggestions.
Thanks in advance.
Prashanthi Rayaprolu.

You can not restrict that using LCM. Need to modify the rights at the folder level.
Explicitly remove the following rights for the user group,
Add objects to the folder
Edit objects
Delete objects
Copy objects to another folder (check this if required)
Once the above four are denied then users wont be able to Edit/Add/Delete reports in that folder.

TS1389 I need help removing UAC from itunes..

I need help removing UAC from itunes so it will not allow me to open itunes. Everything I have read from other comments that you shouldn't turn off your user account control. I just to be able to open itunes. Can anyone help me with this problem?? Greg, ogrady612@yahoo,com

I had this problem too but you do not need UAC to be turned on.
Click on start and search for 'uac' in the search box at the bottom and click on 'Change User Account Control Settings' when it comes up. Move the slider to the bottom when the window appears and save the changes and your done!
It's worked for me and my uac has been off for months without causing me any problems!
Hope this helped

HT201250 I am very frustrated. New to iMac products. Just bought a 27" iMac two days ago. Received no manual, no booklet with ID registration number, etc. Need help migrating PC to iMac. How do I get in touch?

Need help migrating pc to imac. Do not have manual. Trying to get infornation online, but, cannot get an answer.
I have downloaded pc migration assistant to pc windows 8 pro. Was able to get imac to finally give me "the number"
Did the same with pc received number once, not same as imac. Pop up window with info dissappers and cannot recover
What am I doing wrong? Paid extra for extended support package and it took hours to finally get it registered and approved.
However, no help. Yikes, I feel like a make another great mistake!

First: If you purchased AppleCare you should call back at 1-800-APL-CARE and ask for further assistance. You'll want to learn how to retrieve your operating system version and your IMac's serial number as you'll need these for when you call AppleCare:
Click on the Black Apple in the top left hand corner of your Imac's physical monitor
Click on About this Mac from the drop down menu
Below the silver Apple and "OS X" it will say "Version 10.x.x" (If this number is not 10.8.4, run Software Update by hitting the button marked "Software Update")
Click on this number twice in a row. This is your machine's serial number. (zeros can be used; the letter "O" is never used).
http://support.apple.com/kb/HT1349 for details how to find serial numbers on Apple products
If you have an Apple ID (you can create one at appleid.apple.com), you can login to supportprofile.apple.com, register an Apple product, and sign up for VoicePass, which, if you give your product a name e.g. Maria's Imac, you can speak that over the phone and skip having to give the serial number when you call.
If you have an Apple ID, you can also call AppleCare and ask them to activate VoicePass.
This is the link for your tech specs: http://support.apple.com/kb/SP667
This is the link for your quick start guide: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
This is the link for important product information: http://manuals.info.apple.com/en_US/imac_late2012_quickstart.pdf
Second: this is an educated guess: Your new Imac and your PC need to be either on the same wifi network or you need to connect them physically with an Ethernet cable (available at Radio Shack, Wal Mart, etc). My guess is that they are not, and so your IMac and PC are not talking to each other. That might be why you are seeing a different code on the PC.
Time Machine would not be relevant to your issue. http://support.apple.com/kb/HT4796 is the link to relevant instructions, however it left out some housekeeping you should do on your Imac before you begin a migration
Run Software Update on the IMac to confirm that the latest updates are installed.
On the IMac, make sure that you have the latest versions of any third-party software.
On the source Mac, open System Preferences, click Sharing, and make sure there is a name in the Computer Name field.
Do not let either computer go to sleep while you are attempting to migrate. To disable sleep on the IMac
Choose System Preferences from the Apple () menu.
Choose Energy Saver from the View menu.
Adjust the "Computer sleep:" slider to Never. (Change this back after the migration is done).
You can adjust "Display Sleep" to a few minutes - this won't affect the migration
Uncheck the box if checked next to "Put Hard Disks to sleep when possible"
I don't know Windows 8 but this link looks promising as to how to disable sleep: http://techmell.net/how-to/disable-enable-sleep-mode-hibernate-windows-8/
Once you've done this, either connect both Mac and PC to the same wifi network and surf the web with each to confirm that connection is working - or connect them to each other with an Ethernet cable.
Then relaunch Migration Assistant on your Imac and your PC, and follow the instructions in http://support.apple.com/kb/HT4796 starting with your IMac, or call AppleCare back.
Understand that if you have further issues, you'll need to help AppleCare help you by:
walking them through the steps you've taken in Migration Assistant
letting them guide you as they isolate the issue to either:
The Imac's software
The IMac's hardware
The PC's software
The PC's hardware
Firewall settings (maybe - especially if 3rd party firewalls are installed)
The wifi connection, if used
The ethernet connection, if used
I think the issue is likely what I guessed, or it's a software issue.
To learn more about your new Mac, I recommend this link: http://www.apple.com/support/imac/intel/
And this book: http://www.amazon.com/books/dp/0789749890
I am a technical support professional who troubleshoots Macs all day long. I do this for a living. The book above is the most accurate, and easy to understand book I've seen with respect to using Mountain Lion and its various applications. It's for a MacBook but the focus is on the software which is why I recommend it.
Don't feel like you have to rush to upgrade to OS X Mavericks. In fact, you should always confirm both all the hardware and software you use is compatible with any new operating system before you upgrade. And ask yourself: "why do I need it now?" Because it's new is not a good answer.
In the future, specifying any troubleshooting others have done will help those on these boards help you. Also, don't let a specific issue lead you to assume you've made an all-encompassing mistake. It's just one issue, and it's resolvable.
And everyone else: giving a dozen recommendations for reading will only leave the petitioner bewildered. Start with three. And try responding with a hypothesis as to what's causing the primary problem!

Migrating user from Exchange 2010 to Exchange 2013 succeeds but OWA redirects to 2010

Hello everyone,
I am migrating users from exchange 2010 to 2013, Users migration works perfectly and completes without any issue but after the user migration finishes I try to login to OWA but user goes to OWA exchange 2010 not 2013 as if the mailbox has not been migrated.
I have checked the HomeMDB attribute and I can see the new database on 2013 is located there. how to solve this? I have retransfered the user back to 2010 and 2013 but it didn't work.
I would appreciate your help.
Thanks
Mohammed JH

Hi Amit
After 30 mins approximately we checked the inboxes that have been migrted (2) and we found out they are working.
İ wonder why there is this delay ? İ have already done migration before but it never took this much time. İ would appreciate your reply.
Thanks
Mohammed JH

Migrate Users from a child domain to a root domain in different forest

Hello,
it supported to migrate users from child source doman to target root domain?
I established a trust, but i don't see child domain at ADMT installed on target domain DC. Source root domain is visible

You should not be needed to establish a trust as all domains within the same forest already trust each other - are you sure those domains belong to the same forest? You can find out using the following command:
nltest /DOMAIN_TRUSTS
If ADMT dosen't show a partiuclar domain in the dropdown list, you can/have to type the domain name manually.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Migrating users from Directory Server 4.16 to 5.2

Hi, I'm trying to migrate users from an old Directory Server 4.16 and importing them to a new 5.2. I tried using the db2ldif script and it succeded in exporting everything into a single file. After I import that data into the new server I can't see those users with Delegated Administrator even though I can see them in the Directory Server. What am I doing wrong?? I also tried exporting single leaves from the server using the db2ldif but I haven't succeded, do you know of a way of doing it??

You shouldn't need to create a mailbox manually. iMS will do that when it has something to put in it.
I fully agree about locating the users, iDA is a little limited for how it finds the users in the user tree. It expects to find a DC tree for domains, and a tree for users. If all isn't exactly where it looks, it won't find anything.
Messaging Server itself may be less restrictive. . .
Much also depends on where the users came from, and your Messaging setup. iMS is capable of "using" directory entries that are correct for Messaging 4.x, but iDA is not. If you migrated from NMS 4.xx, and didn 't update the schema, then iDA won't find the users. . .

Lync 2013- 4 FE servers-F5 HLB- migrating users from OCS-WMI error

There are 4 Lync 2013 EE FE's with an F5 HLB. 3 of the FEs are Windows 2012 R2 and one is Windows 2008 (this will be decommissioned).
Access the Lyncadmin/cscp web page works to migrate users from OCS to Lync most of the time. We noticed at times the following error message:
Move-CSLegacyUser: verify that WMI Provider is installed by running OCSWMIBC.MSI. For details, see the inner exception.
So for troubleshooting we would use the <FEname>/cscp to test each server. The 2008 and one of the 2012 servers worked fine. The other 2 2012 servers failed with that same error message.
I looked at lots of articles and made sure that all of the servers had the HKLM\System\CurrentControlSet\LSA\DisableLoopbackCheck set to 1 as well as putting the Poolname FQDN and LB VIP IP address in the HKLM\System\CurrentControlSet\LSA\MSV1_0 registry
keys. Just the pool FQDN alone was tried as well. All the servers were rebooted one at a time as well after these changes. The Pool FQDN is a DNS entry with the VIP address.
The same user account is being used when logging into the CSCP. Trying the CSCP from any server or client machine and using the <FEname>/cscp fails for the 2 servers.
I have checked the authentication methods in IIS for CSCP internal and have negotiatekerberos then NTLM listed under Windows authentication\challenge.
I am running out of resources and ideas.
Anyone?

Have you confirmed that ocswmibc.msi is installed on all the 2013 Front Ends?
"First install the Windows Management Instrumentation (WMI) Backward Compatibility interfaces package; this application is installed
by running OCSWMIBC.msi. (OCSWMIBC.msi can be found on the installation DVD in the Setup folder.)" - http://technet.microsoft.com/en-us/library/gg413025.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Migrating Users from domino directory

hi
We are planning to migrate users from domino directory to the sun java directory server. Is it possible to import the csv file of domino into sun directory.
The imported users should be visible in the corporate address book.
Would like to know the file in which the directory server saves the users..
we are using directory server v 6.0
thanks..

you will need to crunch your csv and convert it to LDIF

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

Migrate Users from 3.0.9 to 9.0.4

Hi:
We successfully migrated our users from Portal 3.0.9 (DB 8.1.7.4) to iAS 9.0.2 follow portalstudio/upgrade notes, running ssomig script. After upgrade the atribute "userpassword" in OID does not exist, and when the user connects for first time the sso page request a new password and the the atribute has a value. Due to a bug we install 9.0.4 and try to migrate users from 3.0.9 to iAS 9.0.4. Unfortunately is necesary upgrade our database 8.1.7.4 to 9.0.1 before run the upgrade.csh script. We cannot do this. And ran the new ssomig script against 8.1.7 and get a error when compile a package. Then we ran the ssomig script (9.0.2 whitout the patch part) and get the ldif files but when the script try to load the files, get the ldap 50 error. Then we modify the ldif files and load with ldapdadd command (note 251775.1) and the users are in the OID whitout the "userpassword" atribute but when we try to connect in the sso page get the invalid password error. Any idea?

Hi
The ssomig scripts (patch 2995671) must be run from a 309 SSO schema to an iAS 902 infrastructure. No other combination is currently supported. You can not migrate directly to a 904 infrastructure, although this may change at some future point in time. You must also be careful when running the commands because they require different environment variable settings for the export and the import operations.
Immediately after migration the password attribute in OID will not have a value. 309 SSO and 902 OID use different one way hashing to encrypt the value therefore it can not be directly transferred. The values are populated when the user logs in again. The password is checked against the old value and if ok is re-encypted into OID. This process is modified if the password does not meet the default password policy and in this scenario the user will be prompted to enter a new value.
You must follow the steps and sequence in the Portal Upgrade Guide carefully to succeed. Changing from the documented path is not supported and will almost certainly fail.
I recommend you get in touch with support ie log a TAR and discuss your configuration to put in place the correct upgrade plan for your environment.
Regards

How to migrate users from HUB to Shared Services

Hi,
We are upgrading Essbase from 7.1.6 to 9.3.1. In 7.1.6 we were using Hyperion HUB for provisioning and we are going to use Shared Services with External authentication for the provsioning from now on.
My question is what is the best way of migrating users from Hyperion HUB to Shared Services.
Thanks,
MP

After you copy the SQL Repository across to the new environment and log in with the owner account, you will be required to register the application with Shared Services. After registering with SS it should prompt you to "Migrate Users and Groups" which will do the migration for you.

Need help migrating users from dead 10.4.0 server to 10.5.8 server

Similar Messages

Maybe you are looking for