Need help on PI Mapping.
Hi,
I searched the documents for mapping techniques in the forum. but, i didnt get properly.
can any one plzz provide me the mapping documents.
I am getting structed when i seen some user defined functions and some mapping techiniques.
Thanks,
Singh.
Dear Singh,
Based on the requirement we need to go for different mapping techniques. I think you are searching for differnert kinds of mapping also. So go through the 16 th question of Mappings part and it will be very useful for you. More number of questions answered here.
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
JP.
Similar Messages
-
Need help in modifying mapping parameters of out the box mapping
Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
RagIf you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay. -
I need help with my mapping - CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV
hi, guys, i need help with my mapping, i dont know this error (i not speak english)
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Object-Id:4B903E2DDC853C1493E1DED5C5ED70A3 </Trace>
<Trace level="1" type="T">Mapping-SWCV:88D96A70BAAE11DFAE5EE925C0A800C2 </Trace>
<Trace level="1" type="T">Mapping-Step:1 </Trace>
<Trace level="1" type="T">Mapping-Type:JAVA_JDK </Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_mm_sgipi_fi001_vta_clientes_ </Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="3" type="T">Executing multi-mapping </Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
help me pleaseyou can use the sharedobject to record a user/computer has taken your quiz, the session data and record their results. at the start of your quiz, check for the sharedobject and, if it exists, check the other data and take appropriate action.
-
Need help with instruments mapping
I have Korg PA80 and i hooked up midi out from it to midi in to Logic8, I have some nice realtime accompaniment tunes i can play on that keyboard, what i want to do is to play on my PA80 accompaniment tracks but replace all sounds with my custom sounds from my Logic plug ins, right now when I hit play all i hear is some garbage playing because no instruments properly mapped on Logic, I even created all 16 instrument tracks and set them all on all 16 channels, drums on 10 and so on, but when i start play on PA80 in Logic I still hear like bass trying to play all parts and not bass part only, same for drums when i press Am or Dm drums will play properly with some another drums sounds that trying to play all other instruments parts, need to separate them so the bass will play only bass part, drums will play drum part and so on, need help on how can i do that, lets say for drums i will choose logic drums sounds, for base Logic bases and so on, so Logic will become something like sound module for my PA80 instead of internal sounds I would like to use my virtual instruments sounds, thanks a lot
Thanks for your reply Dave.
I have no answer to your question but I found a way to create my SQL code with OWB mapping operators. Unfortunately it is very very slow compared to the execution of the SQL code and therefore not useful at all. I connected the following steps all in one mapping:
1. Table operator(T006_SITE) -> Filter(T006A01PK_SITEID where T006A11FK_COUNTRYID IS NULL)
2. Table operator(T002_COUNTRY) -> AGG (MAX T002A01PK_COUNTRYID)
3. JOIN the output from 1. and 2.(T006A01PK_SITEID and T002A01PK_COUNTRYID))
4. UPDATE T006_SITE with the output from 3. (T006A01PK_SITEID as matching column and T006A11FK_COUNTRYID as column to be updated)
The execution mode of the mapping should be set-based fail over to row-based, but it used row-based mode even without getting an error. Are UPDATE mappings only executable in row-based mode or is there a way to change that?
Does anyone have an idea how I can speed up that mapping or integrate my SQL code in the OWB?
Thanks in advance,
Dirk -
New to Illustrator, need help creating a map?
Need to create a map of a neighborhood. New to program any help would be great!
rdelaroca,
There are vector maps available for many areas.
Or you may work on a locked image from Google Maps or something including the important parts/themes/whatever, using the Pen Tool as the primary tool for shapes in general. -
Plz , need help on IDOC mapping
Hi friends
I need help on mapping IDOC (invoic02) to a customer fields to be sent to a printhouse .
The idoc contains several Item lines , from 1 and up after for instance
The fields E1EDP01-MENGE and E1EDP26-BETRG could be repeated many times , the customer wants eah line item (quantity , price and subtotal ) in separate lines.
What is the best approach to do the mapping , and how can I loop in the idoc segments in order to get each line separetly.
Many thanks in advance.Hi
Thanks again , plz bear with me as i am new to this kind of assignment.
This is a part of my requirement, so i suppose that I have to create a Data type as node for the customer fields corresponding to the node in IDOC and just map the source node to the target node , and it will repeat it self as many times as there is line items in the sales order.
Customer fields Idoc fields.
segment E1EDP01
DETAIL_ANTAL E1EDP01-MENGE - LOOP
segment E1EDP26
DETAIL_STK_PRIS E1EDP26-BETRG - QUALIFIER = 001- LOOP
DETAIL_SUBTOTAL E1EDP26-BETRG - QUALIFIER = 003 LOOP
If I change the context of the source, will it not affect the source node at all.
best regrads. -
Please I need help with mokia maps!
Hello! I have bought my phone Nokia N76 and I found nokia maps v 1.2 in it, I tried to install nokia maps v 2 but it says "update error"!
when I tried to remove nokia maps 1.2 from the menu, it says unable to delete I tried this from the menu as it is not listed in the application manger list ! what shalI do?! . I don't wan't to update the software (it's the lastest). please if anybody knows help me please?
Message Edited by Twilight28 on 23-Nov-2009 06:53 PM
Message Edited by Twilight28 on 23-Nov-2009 06:54 PMReading above posts I seem to remember that for early versions of Nokia Maps the map data is stored in E:\Private\20001f63\diskcache\ NOT E:\CITIES as for later versions, so try deleting these + .qf file. You would need to enable "show hidden & system" files on your PC to see these however.
Provided that you carry out *#7370# or three finger reset (erases ALL data) after deleting these folder/files, you should really be able to install Nokia_Maps_2.0_4503_3.1.sis from here: http://nds1.nokia.com/files/support/global/phones/software/Nokia_Maps_2.0_4503_3.1.sis
You would need to run Nokia Maps application to create folder structure on memory card required to download mapping.
Happy to have helped forum with a Support Ratio = 42.5 -
Hi Folks,
I have below Query. Can you please suggest how do i solve below case.
My source system has 4 fileds A , B, C, D and the target system has 1 Filed TOTAL.
I have to concatenate all the 4 source fields by using slash(/) and placed in TOTAL target field.
i need output has A/B/C/D.
but here is my Query? if any one of the field is not present in source field i.e. if source B filed is empty then I have to print Output has A/C/D.
NOTE: there is no empty slashes for B.
Please help me on this issue.
Thanks,
EnivassHi Supriya,
Actually I didnot get ur mapping shot
Can u tell me some more briefly plzzz
I tried blow
A
concat -
> trim -
> then what i have to use.
Thanks,
Enivass
Edited by: enivas on Oct 20, 2010 9:47 AM -
Need help in header mapping!!
Hi, because we have an third party system i think i have to use header mapping in receiver agreement!
For outgoing IDocs everything works fine, incoming aren't be transfered to target system.
I have:
ThirdParty: EDI
BusinessService: EDI_Test
Business System: Q01CLNT010
Incoming receiver agreement looks like this:
Sender
Party: EDI
Service: EDI_Test
Receiver
Service: Q01CLNT010
Interface: DELINS.DELFOR02
Namespace: urn:sap-com:document:sap:idoc:messages
Header Mapping (like i thought)
Sender-Party: EDI
Sender-Servcie: EDI_Test
Reciever Party:
Reciever Service: Q01CLNT010
The incoming IDoc has follwoing parameters in header Segment:
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DIRECT>1</DIRECT>
<IDOCTYP>DELFOR02</IDOCTYP>
<MESTYP>DELINS</MESTYP>
<STD>V</STD>
<STDVRS>096001</STDVRS>
<STDMES>DELINS</STDMES>
<SNDPOR>EDI</SNDPOR> [like port in we21]
<SNDPRT>LS</SNDPRT>
<SNDPRN>EDI</SNDPRN>
<RCVPRT>LS</RCVPRT>
<RCVPFC>LF</RCVPFC>
<RCVPRN>30396</RCVPRN>
<CREDAT>20071204</CREDAT>
<CRETIM>130428</CRETIM>
<REFMES>DELFOR02</REFMES>
</EDI_DC40>
can somebody give me a hand on this?!
brHi guys,
because of help approach i wrote what i have done yet. But first i explain what is working.
We have an EDIServer in our Landscape which sends EDI-Calls. This Calls are triggered from R/3 via XI to EDIServer. This outgoing communication runs. (plz don't ask why we still use EDIServer because of EDI-Adapter for XI)
I configured this scenario with party!
But now i want to get calls from EDIServer. So i have to work with send IDocs from EDIServer which this previously tronsforemed from EDI-Format in IDoc-Format.
So i simply thought i configure scenario the other way round by using the party again. But this does not work out. However, i explain my IB Rep Objects:
Receiver Determination:
Sender
Party: EDI
Service: EDI_Test
Interface: DELINS.DELFOR02
Receiver
Party: *
Service: *
Interface Determination:
Sender
Party: EDI
Service: EDI_Test
Interface: DELINS.DELFOR02
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Party: *
Service: *
Sender Agreement:
Sender
Party: EDI
Service: EDI_Test
Interface: DELINS.DELFOR02
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Party:
Service:
Receiver Agreement
Sender
Party: EDI
Service: EDI_Test
Receiver
Party:
Service: Q01
Interface:DELINS.DELFOR02
Namespace:urn:sap-com:document:sap:idoc:messages
--> do i need header mapping here?!
What do i need to do to make this scenario run?!
br - i highly appreciate ur previous help!!!! -
Hi,
I am having two components.
Comp A is main componenet and Comp B is Used component and using in Comp A.
Intially I am getting the data from the Comp A ( main Comp) to Comp B(used Comp) by context mapping.
it is working fine.
The same way I need in Reverse. From Comp B (Used Comp) to Comp A (Main Comp) i have to get the data .
how to do context mapping for this.
pl help.
Thanks in Advance.
KarHi,
To achieve reverse (external) context mapping, the attribute 'Input Element' in interface node of component B has to be marked. When you declare a component usage of component B in your component A, you will see the interface node under Component Usages->Interface Controllers (in your navigation tree). You can define the mapping here, between the 'Input element' node of component B and the component controller Node in comp A by right click->Define external context mapping.
Have a look at the [documentation |http://help.sap.com/saphelp_nw04s/helpdata/en/67/cc744176cb127de10000000a155106/frameset.htm] in detail.
You can have a look at the ALV component SALV_WD_TABLE, which uses external context mapping to render the ALV in any component using this component. This will give you a good idea.
Regards,
Nithya -
Hi,
Need ur help on below situation.
I have input file structure as
- <G_SPO1>
- <S_PO1>
<D_350>0001</D_350>
<D_330>6</D_330>
<D_355>EA</D_355>
<D_212>151</D_212>
<D_235>VC</D_235>
<D_234>40421-821/1920-02</D_234>
<D_235_2>SK</D_235_2>
<D_234_2>427Y73226</D_234_2>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325940</D_127>
</S_REF>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325957</D_127>
</S_REF>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325964</D_127>
</S_REF>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325971</D_127>
</S_REF>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325988</D_127>
</S_REF>
- <S_REF>
<D_128>SU</D_128>
<D_127>0060325995</D_127>
</S_REF>
- <S_REF>
<D_128>CR</D_128>
<D_127>WHITEHOUSE,RYAN</D_127>
</S_REF>
</S_PO1>
</G_SPO1>
I need to map D_127 elements to target field.
here i need to check conditions.
IF D_128 = SU then only i need to map D_127 to target field. otherwise ignore that record.
Plzz let me know how would i map thid field to target field.
Thanks,
Singh.Lakshmi,
for PO1 first element is 0001 i need output as
0060325940
0060325957
0060325964
0060325971
0060325988
0060325995
for next PO1 first element is 0002 then i need output as
0070325940
0070325957
0070325964
These below fields are present in input file. the above file i mentioned only for PO1 first element D_350 = 0001.
Presnetly i am geting output as
0060325940
0060325957
0060325964
0060325971
0060325988
0060325995
0070325940
0070325957
0070325964
but i need to differentiate this output as separate based on D_350 = 0001.
finally required output is
if PO1 1st element D-350 = 0001
then output is
0060325940
0060325957
0060325964
0060325971
0060325988
0060325995
if PO1 1st element D_350 = 0002
then
0070325940
0070325957
0070325964
Plzzzz let me know.
Thanks,
Singh. -
000000000000F0011000001448MSQUAL9010000000906 *
200798438321H001 SHEN.500010/10/200723:56:55NOSP KWO4A MS*
2007984383215397 00000500000205 *
2007984383215396 00000200000205 *
200798438321C001 *
200798438322H001 SBHS.500011/10/200705:50:00NOSP AGH4A MS*
2007984383225397 00000500000205 *
2007984383225396 00000238000205 *
2007984383220012 00001480000355 *
200798438322C001 *
=============================================
Main header :000000000000F0011000001448MSQUAL9010000000906 ( relation 1:1 )
Each record ending with Start : *
Sub Header : 200798438321H001 ( relation 0:unbound )
body messages 00000500000205 ( relation 0:unbound )
Close Subheader :200798438322C001 ( relation 0:unbound )
any one could help how to write the Java mapping , am able to get the data from local folder , but error getting as a message mapping error, there is no key field values for in this message.
Probably it should be happen with Java mapping, actually I am from SAP SD back ground, can understand the ABAP.
Warm regards,
kumar.Hi,
I think file adapter is sufficient for you. Dont need any java mapping. Refer to the file adapter content conversion for sender. Identify the key fields for heading, messages and footer. Then define record set with repeating structures in it like head,1,msg,*,footer,1.
This should solve the problem.
VJ -
Need help with port mapping on Airport Utility 6.1
Ive been trying to port map on my TC with Airport Utility 6.1 and failing miserably. Port still closed. Can anyone advise where Im going wrong? Am trying to set up my home camera to be viewed outside.
I managed to key in the ports etc under Network and Port Settings. But nothing works. I'm tearing my hair out.
Any suggestions to try would be helpful.
ThanksUse the 5.6 utility.. it is much easier and I think works better.. although you cannot load 5.6 directly into 10.8 the version for Lion actually works fine.
Download 5.6.
http://support.apple.com/kb/DL1482
Download unpkg
http://www.macupdate.com/app/mac/16357/unpkg
Open the AU 5.6 dmg and drag the pkg over the open unpkg.. it will create the directory on the desktop. You can either run it from there or drag the utility to your utilties directory.
Take screen shots of each step. Post them here.
That way we can tell you where it has gone wrong.
What port exactly does the camera need open?
How are you connecting remotely?
ie do you have a fixed public IP?? If not how are you getting IP?
Is the TC the only router in the network.. it is irrelevant unless the TC is the one and only router. -
Need Help with Message Mapping in PI 7.1 - JDBC to IDOC
I have an outgoing SQL function that sends multiple rows of data for use in creating an IDOC in ECC. I am trying to key the creation of new IDOCs (already did the maxOccurs trick to the IDOC definition) based on a field in the JDBC return data...
JDBC Message Format...
SEGNAM - TRANS_ID - MATERIAL - VKORG...ETC
MARA - 00001 - 1234 - <space> - ...
MARC - 00001 - 1234 - VK01 - ...
MARA - 00002 - 9876 - <space> - ...
MAKT - 00002 - 9876 - <space> - material description - ...
Each time there is a new TRANS_ID, I need to indicate a new IDOC in the message mapping. I have tried all kinds of combinations of TRANS_ID --> dropContext --> splitValue and TRANS_ID --> collapseContext --> splitValue, but nothing has worked.
Has anyone done this kind of message map (without any BPM please)?
Thanks,
NathanHello Nathan,
For this one, you have to play with contexts.
row 1 SEGNAM = MARA, TRANS_ID = 1, MATNR = 123...
row 2 SEGNAM = MARC, TRANS_ID = 1, MATNR = 123, WERKS = PL01...
row 3 SEGNAM = MARA, TRANS_ID = 2, MATNR = 987
This also depends on the occurrence of the parent node. example, if I want MATNR to be populated, the logic would be like
ex:
IDOC1..unbounded) (The logic is the already provided in an earlier response)
-->MATNR (1..1)
MATNR --------> removeContext ----------------> FormatByExample --> MATNR
TRANS_ID --> removeContext --> splitByValue:ValueChange --> /
If the rows are not in order of trans_id, then you need to incorporate sorting into the logic above.
Hope this helps,
Mark -
Need help with Resource Mapping from Application Deployment to VC:virtualMachine
Hi,
I've built a number of vCO Workflows and hooked them up to Resource Actions in vRA. However, the Workflows I've built all take a VC:VirtualMachine as the input and therefore,they only "hookup" to VMs in the Machines list in the Items tab in vRA. Ideally, I want these actions to hookup to the Application Deployments in vRA since that is what my users are deploying - the VM that the App rides on is somewhat secondary. Plus, it's cumbersome for them to find the VM that corresponds to the App they want to run the action on.
So, I looked into creating a new Resource Mapping, thinking I could map an Application Deployment to a VC:VirtualMachine so that I could create an Action for the Application. I was able to create a mapping from Application Deployment to VC:VM using the Map to VC:VM existing workflow and I could add that to the Actions menu for the Application Deployment but if I try to run it, it fails. I kind of expected this since I think the Map to VC:VM is expecting an input of IaaS VC:VM to map to vCO VC:VM. I think what I need to do is write a Workflow that will take in the Application Deployment "object" and find the VC:VM inside it but I don't know how to find out the structure of an Application Deployment such that I could parse it and get the VM.
Does this make sense? Am I going about this the right way? Thanks for any help,
TomHi,
I've built a number of vCO Workflows and hooked them up to Resource Actions in vRA. However, the Workflows I've built all take a VC:VirtualMachine as the input and therefore,they only "hookup" to VMs in the Machines list in the Items tab in vRA. Ideally, I want these actions to hookup to the Application Deployments in vRA since that is what my users are deploying - the VM that the App rides on is somewhat secondary. Plus, it's cumbersome for them to find the VM that corresponds to the App they want to run the action on.
So, I looked into creating a new Resource Mapping, thinking I could map an Application Deployment to a VC:VirtualMachine so that I could create an Action for the Application. I was able to create a mapping from Application Deployment to VC:VM using the Map to VC:VM existing workflow and I could add that to the Actions menu for the Application Deployment but if I try to run it, it fails. I kind of expected this since I think the Map to VC:VM is expecting an input of IaaS VC:VM to map to vCO VC:VM. I think what I need to do is write a Workflow that will take in the Application Deployment "object" and find the VC:VM inside it but I don't know how to find out the structure of an Application Deployment such that I could parse it and get the VM.
Does this make sense? Am I going about this the right way? Thanks for any help,
Tom -
Need help on message mapping screen
Hi folks,
I am working on file to idoc scenario. I Imported the IDOC to my scenario. In Messaga Mapping IDOC structure displaying fields as a documention. but i need techincal names of those fields.
for Example: In my IDOC 1 field is showing companycode but I want to see that field as a BUKRS.
How to see the technical names of IDOC fields in Message Mapping.
Your help is highly appreciaHi,
I dont think we would be able to see the data element names of the IDOC in XI. Even the imported XSD of Idoc doesnot contain data element name.
We would be only dealing with the field names/ structure of the IDOC for field message mappings. The field names are internally mapped to the data element names in SAP R3 system.
To view the internal mapping between field names and data element names of the Idoc fields, you can go to the transaction 'WE30'. Give the basic type of the Idoc and go to the segment editor. You can find the data element names for each field name there.
Thank you.
Regards,
Subbu
Maybe you are looking for
-
Sharing itunes between users on one computer
Hi, How do you share one itunes library between multiple users on one mac? At the moment each user on our computer has their own library which has lead to a lot of music being duplicated. Is there any way to have this all in one library?! Many thanks
-
How can you brand a serial number onto the system board?
I just replaced a system board and need to brand it with the appropriate serial number. How do I accomplish that? I have software to run when I do that with Dells or Lenovos. How can I do it with an HP?
-
Can't Download Blackberry Applicatio​n Monitor
Can't download Blackberry Application Monitor to my 9650? It shows to be compatiable with the 9650 but when trying to download, it states that it is not available for the 9650. I'm confused. Does anyone know what the deal is?
-
When a specific app crashes and goes to home screen
When I download a game the app crashes/ exits back to the home screen i think I need so help to fix this
-
Null statistics for tables but still got optimizer problem
Hi, We got a batch application on 10.2.0.4 Oracle database that does a lot of deletes and inserts when run it. Nightly statistics gathering was not enough so I deleted and locked the statistics for all tables. Now it has null statistics so it suppose