Need help playing a recorded au
How do I make the audio play on like musicmatch it will only play in the zen player and it doesnt have the musicmatch icon and when i click open with musicmatch it still doesnt work.
Hello,
Well, I looked through the example code I tried to break it down to the point where you could create a simple Play VI. Unfortunately, I don't have the PDA target, so I'm uncertain if the little example that I have attached will run or not. If not, I also took a screen shot so you can see what VIs I used. I'm pretty sure I only used VI's that I found on the example itself.
Good luck.
Attachments:
Play_Wav_PDA.vi 55 KB
Play_Wav_PDA.bmp 1029 KB
Similar Messages
-
Need Help with DVD recorder (HDMI) to record off DVR
I purchased a philips dvd recorder a few years ago and need help in setting up to record my DVR program recordings. The philips user manual is not very helpful being I'm trying to set-up with just using HDMI cables. I have a HDTV (Vizio) with a HDMI port; a DVD recorder with HDMI port and my Verizon set-top box have a HDMI port. How do i get it all to work and be able to record/copy programs from DVR to my DVD recorder? Do anyone have suggestions on how to set up wiring. Thanks.
Solved!
Go to Solution.First keep in mind that DVD is not an HD format, so you will not be able to record HD shows in HD; they will be in letterboxed 4:3.
The FiOS STB only has one HDMI (out) port. Therefore, you will need to use some other output from the STB to the DVD recorder. Component, or even composite/RCA, because it's not going to record in HD anyway to DVD, will work just fine. Then you want to set your DVD player to whatever input you used to connect from the STB; i.e. mine uses "Input 1" for my composite connection.
If you turn on your STB and DVD, this will record whatever the STB is outputting to a DVD if you press record on the DVD recorder. This includes all of the program menus and any other on-screen graphics on the STB, and this means you cannot change the channel if you are recording from your STB. You can shut your TV off, but you will not be able to watch another show while recording one to DVD.
Your DVD player might give you an HDCP message at first when the recording starts if it's getting an HD input, but that should go away after a few seconds, at least for my Panasonic DVD recorder with a composite connection. -
Wrt54g i need help playing c&c online it keeps losing connection
i need help bad with getting command and conquer generals to play online because i never had a problem before with connection prior to getting the router but now i can't stay on for more then 30 seconds and i am really frustrated, can u please help me?
Hi…Every game works on different TCP or UDP ports. You need to forward these ports on your router and reduce the MTU to 1365. So get the port no required by your game, forward the port for the IP address of your PC.
-
Need help: playing songs in order, strangewindow message, upgrading I-Tunes
I have 2 situations I hope someone can help me with:
1: PLAYING SONGS IN ORDER; WINDOW MESSAGE
I have CDs of music that when I load them onto my pc laptop the song names don’t come up—each song lists as “track 01” “track 02” etc.
When I try to play the album thru I-Tunes on my laptop, the songs won’t play in order. i.e. ALL the “track 02”s will play before going to “track 03,” then ALL the “track 03”s will play, etc. So I made a playlist of each CD.
Now when I try to play the Playlist, I get a window message that says, “The song “Track 01” could not be used because the original file could not be found. Would you like to locate it?” I can choose ‘yes’ or ‘cancel.’ YES takes me to folder selections. I find the song and click on it and then it plays.
There must be an easier way. I don’t want to search for each song one at a time in order to play an entire CD in order.
2: UPGRADE
I need to upgrade. I have I-TUNES 7.0.2. I went online to apple.com and couldn’t find any upgrade option, so I clicked on “download I-tunes”. I got a window that says “download complete.” But how do I tell if it’s really installed? Where do I go on my computer to see what version number it shows?
Any help is appreciated,
Carolyn in Las Vegas2. Help->About iTunes
1. You have done something that has confused iTunes about the location of the files in its library. Without knowing what happened, it's hard to make a specific recommendation, but if you moved your files around manually, move them back, and then, if you want to change the location, do it only by setting it in iTunes preferences and then using Consolidate Library. -
Need help with audio recording
I have recorded my voice in garageband. Now I want to place it on my desktop and have it play when I click on it. What is the best way to do this?
Just tried what you suggest but it hasn't rectified the problem. sanjampet said to uncheck everything else in iTunes, which helped somewhat - it stopped automatically jumping to the next file in the playlist, except that when I play a second voice clip, afterwards it automatically replays the one I used earlier I guess because when I played it it automatically becomes checked.
My workaround is to make sure I open them in QT (and not by the iTune default by mistake) and then save them on the desktop in that black box they open in. It works but not the best solution, especially if I want to enbed in a keynore presentation.
I figured there should be a way to simply turn off or change the default but I guess not. -
Need help in multitrack recording with Audigy 4 pro
Hi there,?I have an audigy 4 pro soundplaster caed and use it with Cubase LE. I haven't figured out yet how to record the several tracks onto seperate?channels simultaneously. All inputs of the soundcard work and I know how to assign the channels to the tracks in cubase. But in the end the same is coming out of all... I have figured out that in the Audigy mixing console you need to select the input source first, but I only can select one. If I select 'what you hear' I can use all - but not seperated. Someone knows how to deal with it'sAny help hugely appreciated
!!! Ggun wrote:
Hi,
wow, I got a big step further with this, thanks.
Yes, after pulling the window down ai discovered many moretracks. I also managed to get a signal in cubase by pressing the monitor item. And I could remap inputs. I got my input 3 set up fine. It's in the devie dislaplyed as L and R but witchever I choose works.
But for my second track it only lets my choose the other otpion of the same input (if trach one is Line 3L its has to be Line 3R for the other input. I did remap the track to to use line in but no signal and in the windows control mixer I still can only select one recording source but it doesn't correspondent with cubase, cubase records line in 3 whichever thing is ticked in the windows mixer.
Line in does go into my soundcards as I can hear it through the speakers but no further.
I uploaded the manual onto my own webspace, seemed the simplest thing: http://www.magicviolin.co.uk/Cubase%20LE%20manual.pdf
Thanks so much again, I actually feel slightly positi've now that I might it even get working...
The Manual cleared a lot. LE seem to have a bit stripped settings compared to SX, but the logic seem to be the same (maybe LE is ~ SE/SX .0).
As you have Audigy 4 Pro there, you should see quite many input channels listed on "VST Inputs" -panel. The bad thing seems to be, you have no names for inputs but they're listed as PCI REC & 2, PCI REC 2 & 3, etc. mono pairs. Now you need to examine which one is which (i.e. does PCI REC & 2 mean Audigy's Line-In L/R, PCI REC 3 & 4 as LineIn 2 L/R, etc.). See below.
NOTE: Inputs being as pairs of L/R channels means you can record to 2 tracks using one stereo input w/ mono connections (i.e. guitar through LineIn L and Bass through LineIn R). Tracks need to be set as mono. When you have one stereo connection or track set to stereo, you get the same signal from LineIn L and R to those tracks you have set the LineIn L or R as input source.
CT Surround Mixer settings:
- open those source channels you're using
- if you use any Creative ASIO driver the .rec source selector has no effect
Project settings:
With any Creative ASIO driver you need to set (Project properties)
- bit-depth (record format) to 6-bit (or 24-bit if using "ASIO 24/96 driver") and
- samplerate to 48000 Hz (or to 96 kHz when using the "ASIO 24/96 driver")
See - Activating and selecting VST Inputs - Manual p.2-25 ->:
- you need to know which inputs are included to AnalogMix() --> you see these listed on Creative Surround Mixer --> rec. source selector.
- give those inputs (label) the same name they appear on Creative Surround Mixer (i.e. Auxiliary, Line-In, Microphone, etc.)
--> you need to do these settings once if you save the (empty) project as a template
See - Mixer p. 7.37 (Audio channel strips)-->:
- here you can select the Input -channels (remember, which ones are in same group "AnalogMix ()" because they uses the same signal path and therefore gets recorded to all tracks having this source selected)
Hope you get things cleared, and remember save a well functioning project as Template (you can make templates with various settings (like one for 6/48 w/ audio tracks, other for 24/96 w/ audio tracks, and next for 6/48 w/ audio and MIDI tracks, etc.).
If you need 'some' VST effects/instruments for your recordings, KVR is best place to start from.
jutapaMessage Edited by jutapa on 04-06-2006 0:43 PM -
Need Help playing a wav file on PDA
Does anyone have a SIMPLE example of playing a wav file on a PDA using LabView PDA. The only working example I can find from NI "Advance Sound Example for LabVIEW PDA for Pocket PC" is a jumbled of confusing functionality. I'm mainly looking for a simple "play" example, but a simple "record" example would be helpful also.
Thanks - BruceHello,
Well, I looked through the example code I tried to break it down to the point where you could create a simple Play VI. Unfortunately, I don't have the PDA target, so I'm uncertain if the little example that I have attached will run or not. If not, I also took a screen shot so you can see what VIs I used. I'm pretty sure I only used VI's that I found on the example itself.
Good luck.
Attachments:
Play_Wav_PDA.vi 55 KB
Play_Wav_PDA.bmp 1029 KB -
Need Help on Result Recording - QE01 - FM / BAPI
Hi,
I want to know the function modules / BAPIs for result recording. We need this for following scenario:
We want to update the test results for characteristics which are available in an external file.
Is there any FM / BAPI available which can do the result recording of each characteristic? Manually, we are using QE01 for result recording.
Thanks,
AmeyHi Sujit,
Thank you for the answer. I can update the values for single results, but the staus is set to 2, not 5. I am setting the paramter in the FM inpproc_ready = 'X'. Still the status is 2 - Processed and not 5- Processing completed. Can you please help with this? Any configuration change is needed?
Regards,
Amey
Edited by: Amey Kulkarni on May 28, 2011 6:29 AM -
URGENTLY need help regarding to recording
Hello all,
I have a problem regarding to using the microphone on my ZEN NEEON GB.
I use it to record my uni'versity lectures and now i'm missing almost all the lectures.
The problem is that, when I start recording it shows the timer and everything seems working fine, I press the pause and hopefully it's finished but when i connect it to my PC nothing is recorded although a big file has been created sometimes about 20MB.
I couldn't find any step-by-step recording procedure on the manual.
I do appreciate your kind advise regarding this issue, as i'm missing my lectures.
regards,I think you may be in for a bit of hard work and possible complications if you have no idea on how to set up a server. It would be more realistic, especially for security purposes for an IT person who is knowledgeable in servers to set it up for the university - seriously!
Anyways, I suppose it all depends on the type of server, is it a windows based server or will it be linux??
I did a google search for 'configuring a server' and came up with these links:
http://www.google.com.au/search?q=configuring+a+server&ie=utf-8&oe=utf-8&aq=t&rls=org.mozi lla:en-GB:official&client=firefox-a
As you can see, lots of information, but it depends on the type of server.
Once the server is set up, you would have information on how to upload the site to the server (same as any webhost) and you use those details to enter into the Remote site window.
I'm afraid I'm not familar with setting up servers, so that's the best help I can offer :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap -
Need help playing videos in iPhoto!
I got my iMac two weeks ago after switching from a 2004 80GB Dell Dimension (Windows XP Service Pack 3) I successfully imported my parents' photos and videos, our iTunes library, and all my photos. For some reason however, my videos won't play. It says it cannot find the original resource file. I used an external HDD to transfer everything over. Should I try importing my photos/videos again or do I have to take more drastic measures?
(I'm not sure if this will help, but my parent's videos are .mp4 files while mine are .mov.)For some reason however, my videos won't play. It says it cannot find the original resource file.
Is this the message window you get:
That comes up when the original file in the library is missing.
If you bring over the videos again copy them to a folder on the Desktop and play them with Quicktime Player before importing into iPhoto to verify that you've got a working file.
OT -
Just recently my computer has stopped playing .mpg files with sound, all I get is the video. iTunes, Quicktime and the Internet all will not play them with sound. Youtube.com does play movie files with sound so I'm assuming they aren't .mpg files.
This problem just started happening recently and I have no idea what I did. .Mov files do play with sound.
Thanks for any help.The following steps solved my problem similar to yours.
1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
2. Change the Audio Output setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.
For more detail, read this article.
http://docs.info.apple.com/article.html?artnum=300832
My output setting looked like 44100.0 Hz when I first opened Audio MIDI Setup. I changed it to 96000.0 Hz first and changed it back to 44100.0 Hz just to make sure the setting will be in effect. It worked.
MacBook Pro (2.0GHz), iMac G5 (1.8GHz), Macmini Mac OS X (10.4.8) -
my movies in iphoto are not playing and I don't know why. does anyone know why this would be happening? I used to be able to play them.
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
were you able to view the movies in iPhoto previously? What changes have been made in the interim?
are you able to play the movies outside of iPhoto with Quicktime Player?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Need help Playing/Formatting videos!!
I have several music videos saved as Quick Time files, but my iPod is not recognizing them, or downloading them? any suggestions???
Do you have a Video iPod and if you do you need to
convert all your video to a format that your iPod
understands. I believe that the tool you need is
built right into iTunes 6.0.3
Thanks for the replies...I do have the new video ipod. Is the tool that you are referring to the "convert to AAC" option? I've tried it....but keep gettin some -50 error message? ( I am using 6.0.3 by the way) thanks again for the help. -
Need Help with Sound Recording
Hi,
I'm a Comp. Sys. Eng. student in my final year and I've been trying to record sound with java for a couple of months now and its driving me stupid. I've looked around on just about every java source site I could find and have found many similar examples of sound recording, none seem to work on my machine. The problem is that I keep on getting either IOExceptions, or empty .wav files (as in the code below). The code included below is a shortened and modified version of some code I got from jsresources.org, the full link is http://www.jsresources.org/examples/AudioCommon.java.html.
I have not had any experience with multimedia in java before.
Can somebody please tell me what is wrong with this code? or is my java environment to blame?
Am I declaring my AudioFormat correctly?
Am I controlling my AudioInputStream correctly?
I'm using JDK1.4 in eclipse. Any help would be greatly appreciated.
* AudioCommon.java
* This file is part of jsresources.org
* Copyright (c) 1999 - 2001 by Matthias Pfisterer
* All rights reserved.
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.AudioFileFormat;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.Line;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.Mixer;
import javax.sound.sampled.SourceDataLine;
import javax.sound.sampled.TargetDataLine;
public class AudioCommon
private static boolean DEBUG = true;
public static void main(String Args[]){
AudioFormat audioFormat = new AudioFormat(AudioFormat.Encoding.PCM_SIGNED,
44100.0F, 16, 2, 4, 44100.0F, false);
TargetDataLine dataLine = getTargetDataLine("AK5370 ",
audioFormat,
5);
File outputFile = new File("C:\\testRecorder.wav");
try{
outputFile.createNewFile();
} catch(IOException ioe){
System.err.println("Couldn't create a new file: " + ioe);
AudioFileFormat.Type targetType = AudioFileFormat.Type.WAVE;
SimpleAudioRecorder recorder = new SimpleAudioRecorder(
dataLine,
targetType,
outputFile);
out("Press ENTER to start the recording.");
try
System.in.read();
catch (IOException e)
e.printStackTrace();
recorder.start();
out("Recording...");
long millis = System.currentTimeMillis();
while(System.currentTimeMillis() < millis + 5000);
recorder.stopRecording();
out("Recording stopped.");
if(outputFile.exists()){
System.out.println("File Exists.");
} else {
System.err.println("File does not Exist.");
System.exit(0);
public static TargetDataLine getTargetDataLine(String strMixerName,
AudioFormat audioFormat,
int nBufferSize)
Asking for a line is a rather tricky thing.
We have to construct an Info object that specifies
the desired properties for the line.
First, we have to say which kind of line we want. The
possibilities are: SourceDataLine (for playback), Clip
(for repeated playback) and TargetDataLine (for
recording).
Here, we want to do normal capture, so we ask for
a TargetDataLine.
Then, we have to pass an AudioFormat object, so that
the Line knows which format the data passed to it
will have.
Furthermore, we can give Java Sound a hint about how
big the internal buffer for the line should be. This
isn't used here, signaling that we
don't care about the exact size. Java Sound will use
some default value for the buffer size.
TargetDataLine targetDataLine = null;
DataLine.Info info = new DataLine.Info(TargetDataLine.class,
audioFormat, nBufferSize);
try
if (strMixerName != null)
Mixer.Info mixerInfo = getMixerInfo(strMixerName);
if (mixerInfo == null)
out("AudioCommon.getTargetDataLine(): mixer not found: " + strMixerName);
return null;
Mixer mixer = AudioSystem.getMixer(mixerInfo);
targetDataLine = (TargetDataLine) mixer.getLine(info);
else
if (DEBUG) { out("AudioCommon.getTargetDataLine(): using default mixer"); }
targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
* The line is there, but it is not yet ready to
* receive audio data. We have to open the line.
if (DEBUG) { out("AudioCommon.getTargetDataLine(): opening line..."); }
targetDataLine.open(audioFormat, nBufferSize);
if (DEBUG) { out("AudioCommon.getTargetDataLine(): opened line"); }
catch (LineUnavailableException e)
if (DEBUG) { e.printStackTrace(); }
catch (Exception e)
if (DEBUG) { e.printStackTrace(); }
if (DEBUG) { out("AudioCommon.getTargetDataLine(): returning line: " + targetDataLine); }
return targetDataLine;
EOF<<<<<<<<<<<<<<<<import java.io.File;
import javax.sound.sampled.*;
class SimpleAudioRecorder extends Thread{
private TargetDataLine m_line;
private AudioFileFormat.Type m_targetType;
private AudioInputStream m_audioInputStream;
private File m_outputFile;
public SimpleAudioRecorder(TargetDataLine line,
AudioFileFormat.Type targetType,
File file)
m_line = line;
m_audioInputStream = new AudioInputStream(line);
m_targetType = targetType;
m_outputFile = file;
public void stopRecording(){
m_line.stop();
m_line.flush();
m_line.close();
EOF<<<<<<<<<<<<<<<<your asking the quest in the jmf forum and using some old type of handling the media
sun has given you very good frame work which reduce lot of coding and makes the life easy
then why are you going to old way.
first go and read jmf tutorial and implement your self dont go to get the code which some other people have written. do your self . you have energy to do. why are depending on others
read well tutorial and design. you will win i am sure
jmf makes life easy -
Sun Studio 11 on Linux: newbie needs help playing the Temple of the Sun
Hi!
I've installed Sun Studio 11 on Mandriva 2007.1 Free edition. I would like to play the Temple of the Sun game but the building process fails consistently.
I tried to follow the instructions on the following page
http://developers.sun.com/sunstudio/learning/temple_faq.html#
but still no joy.
The wizards throughout the building process request much more parameters than those indicated on the FAQ page.
This is the makefile
## -- Makefile --
## User: complex
## Time: May 18, 2007 12:00:44 PM
## Makefile created by Sun Studio.
## This file is generated automatically.
#### Compiler and tool definitions shared by all build targets #####
CC = gcc
BASICOPTS = -g
CFLAGS = $(BASICOPTS)
# Define the target directories.
TARGETDIR_String=GNU-i386-Linux
all: $(TARGETDIR_String)/String
## Target: String
OBJS_String = \
$(TARGETDIR_String)/cEmptyFile.o
# Link or archive
$(TARGETDIR_String)/String: $(TARGETDIR_String) $(OBJS_String) $(DEPLIBS_String)
$(LINK.c) $(CFLAGS_String) $(CPPFLAGS_String) -o $@ $(OBJS_String) $(LDLIBS_String)
# Compile source files into .o files
$(TARGETDIR_String)/cEmptyFile.o: $(TARGETDIR_String) cEmptyFile.c
$(COMPILE.c) $(CFLAGS_String) $(CPPFLAGS_String) -o $@ cEmptyFile.c
#### Clean target deletes all generated files ####
clean:
rm -f \
$(TARGETDIR_String)/String \
$(TARGETDIR_String)/cEmptyFile.o
rm -f -r $(TARGETDIR_String)
# Create the target directory (if needed)
$(TARGETDIR_String):
mkdir -p $(TARGETDIR_String)
# Enable dependency checking
.KEEP_STATE:
.KEEP_STATE_FILE:.make.state.GNU-i386-Linux
Below is the output of make
dmake -m serial -f "/home/complex/.sunstudio/11-Linux-Intel(R) Pentium(R) 4 CPU 1.50GHz/sampledir/ts.c/Makefile" GNU-i386-Linux/String
mkdir -p GNU-i386-Linux
gcc -g -c -o GNU-i386-Linux/cEmptyFile.o cEmptyFile.c
ts.c/cEmptyFile.c [2] warning: data definition has no type or storage class
cEmptyFile.c: In function �main�:
ts.c/cEmptyFile.c [3] warning: �a� is narrower than values of its type
gcc -g -o GNU-i386-Linux/String GNU-i386-Linux/cEmptyFile.o
Build Successful
Total time: 0 seconds
When I execute, it says "unexpected exception has occurred".
Could someone more successful with this game please provide more detailed instructions on how to proceed?
I should get a string somehow which I should paste into the answer window on the game page.
Thanks a lot in advance.Hi
CC = gccYou are using gcc. Switch to using the Sun Studio toolset, and all should be well.
Paul
Maybe you are looking for
-
How Can I Back Up My iTunes Library To A USB Flash Drive?
I have around 5GB of files in my iTunes Library and I don't want to have to use multiple blank cds (dvds) to get my files onto my new iMac. On top of that I can't my cd-writer doesn't work. So I bought an 8GB USB Flash Drive and I just want to know h
-
How do I change the email address on my I phone that is associated with the app store as I no longer have that email address
-
Simple Update query Will not work
I am new to sql and I am doing an update query in access and it will not work, here is the query. UPDATE Change Code Master Table SET change code = '0'; Edited by: 805337 on Oct 26, 2010 8:05 AM
-
Hi, I am having a page that displays both search and searchResults in two different containers. I am trying to do them with one bean and one jsp. (Thats how my current implementation is with JSPs -If the results are there, then I display the results
-
Import design objects - missing something
Hi I have two files with tpt extensions XI2_0_SAP_APPL_4.6C_48_01_classic.tpt and XI2_0_SAP_APPL_4.6C_48_01.tpt to import objects corresponds to rosettanet design objects I got from SAP market place. I did place them in respository_server/import dire