Need help saving PDF correctly!

Every time I try to save my project as a PDF part of the text appears white. I have tried all of the settings and cannot figure it out.
I tried rasterizing my text before saving as a PDF but when I open the pdf the quality is poor.
Can someone please tell me what to do. It's driving me crazy.
Thanks!

Do a web search for adobe photoshop pdf text. Here is one from March http://forums.adobe.com/message/5007907
Do not know it this has been fixed. Here is answer.
This is a verified bug and has been reported to our engineering department to fix. What is known about the behavior:
1. Happens when a single layer of text has more than 6 lines. Workaround: break up text into muliple layers when possible.
2. Only happens when Photoshop has the Creative Cloud updates (13.1.x).
3. Text corruption only happens in Acrobat (Reader). If you open the PDF file in Photoshop, the text will display normally.
4. Even if you create a rasterized copy of the text on another layer (e.g. Stamp Visible to a new layer), if the text layer is still visible (i.e. will be selectable in the PDF), this behavior will occur.

Similar Messages

Need help picking the correct hard drive upgrade for my MBP

I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
Suggestions and recommendations very appreciated.

It will take almost any 2.5 inch sata drive.
Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
I'll start you off..
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

Need help saving a Digital Editions pdf to my dropbox

Can you please help me save an Adobe Digital Editions pdf to my dropbox? I just purchased an ebook for school, and I feel like it was a total waste of money, because I can't open it in my "iAnnotate pdf" viewer, which is where I save all of my ebooks.
If I can just get it into my dropbox folder as a pdf or something, then I can open it on my iPad.
Please help.

If it is a DRM .pdf you will need appropriate app. As far as I know the "iAnnotate pdf" viewer does not support Adobe DRM.
Install Bluefire on the iPad and register it with the same Adobe ID as Your Digital Editions.
Then when you copy Digital Editions books to your Dropbox and they arrive on the iPad,
you can tell Dropbox to open them in Bluefire
(I seem to remember there will be a dropdown menu in top right of Ddropbox when you select the file with options on how to open it)

Need help specifying PDF folder location in Javascript

We currently have a bit of Javascript that opens a PDF file when the user clicks the Open PDF button. The script is:
//External link button function                     border=0></a> <script
var ButtonID="PDF1";
var View="User Guides\\WiMAX User Guide.pdf";
document.writeln('<OBJECT CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11" ID="'+ButtonID+'" TYPE="application/x-oleobject">')
   document.writeln('<PARAM NAME="Command" VALUE="Shortcut">')
   document.writeln('<PARAM NAME="Font" VALUE="MS Sans Serif,10,0,,">')
   document.writeln('<PARAM NAME="Item1" VALUE=",'+GetCurrDir()+View+'">')
document.writeln('</OBJECT>')
The User Guides folder is within the Help folder where the CHM file is saved (so I have Help (where CHM files are stored)\User Guides (where PDFs are stored).
One of the PDFs is now installed outside the Help folder in a folder that is at the same level as the Help folder. I can't seem to get my updated link to work. Is there a limitation on that requires that the PDF be within the same folder or beneath the folder where the CHM is saved? Is there a way to get this to work?
Thanks.

Hi,
See http://www.cybertext.com.au/tips_HTML_chm_external.htm, it was written for AuthorIt but it should work for Robo as well. I seems you just need to get the path right, but you may have to amend your script (specifically the function GetCurrDir() ).
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Need help creating pdf contracts: Reader vs. Acrobat

I am needing some help regarding creating pdf contracts to send to clients. It will basically need to have info input by 2 different parties, the catering company and their client. I am on a Mac and will be originally creating the pdf contract. It will then be used by a catering company, who is using Windows. They will need to input information into this contract, such as dates, client info, prices, menus, etc. Then, they will email it to the client (probably using Windows) for their electronic signatures, ability to print for their files, etc., and then return the signed pdf to the catering company.
I have been going through Reader and Acrobat to see which application would be better to use. In Acrobat, I exported the pdf to Word to input info, but Word changes the appearance/formatting of things. The catering personnel don't need to have to rearrange the appearance, they need something they can simply fill in info on. Is there a way around this?? I then made a new pdf and the rest of the process seemed to function okay.
In Reader, I couldn't find a way to export to Word in order to fill in info and create a new pdf...is this correct? So it seems that I would have to create forms for both parties originally, then have the catering company fill out their portions, and then send the pdf onto the client to fill in their portions. But, if the client highlights the fields, all will be highlighted, not just the ones they need to complete. And, would they be able to alter the fields that the catering company filled out?
Could somebody PLEASE help me out with the logistics of this process???
Any help is greatly appreciated!!

Boy - it's been a year and a half since you asked this question! So not sure if you're still out there.....
Looks like no one replied. Did you ever figure it out? I need to do the same thing...

Need help with PDF/X-1a

I am beyond frustrated here so I hope someone can help me!!!! Ii have Adobe 8 Standard and I can't find the PDF/X-1a in my distiller. I need this particular preset to upload a book cover. The website won't accept any other format. The only thing I have in my distiller is PDF/A-1b.
Does anyone know where I can get the correct distiller? Everyone I know with Adobe 8 has the PDF/X-1a in their options and they don't remember having to do anything special to get it.

Assuming you have Acrobat installed, it would not hurt to verify compliance after the document is created. With the doc open (on my vesion 9) Advanced > Print Production > Preflight > PDF/X Compliance > Verify compliance with PDF/X-1a hit analyze
Note that a document must have a Title in the Title box under Document > Properties (ctrl+d) to pass X-1a and, for whatever reason, analyze and fix cannot add this.
And I'm far from the resident expert here..

Need help saving iPhoto library from damaged hard drive

Trying to help my wife, she has the following:
MacBook Pro running OS X Lion version 10.7.3
iPhoto 11 version 9.2.2
Her hard drive failed last week and she had a ton of photos on it, of course not backed up.
We took her machine to the local Apple Store, they confirmed they couldn't recover the data and they installed a new hard drive in the MacBook. We took the old hard drive to my local PC supplier who's very clever, he worked on the hard drive and was able to copy all my wife's documents to another storage device.....but, he couldn't copy the iPhoto library and is requesting some help.....he doesn't know much about Macs, nor how iPhoto works.
I've read a lot of the posts on this forum and am learning about how the iPhoto library works....and how it requires a Mac based back up hard drive in order to copy it. Okay, here are my questions:
1. My PC troubleshooting guy can see the iPhoto library icon on the damaged hard drive, he says its a huge file. It appears we would need to supply him with a Mac formated back up hard drive, then he could just move that iPhoto library icon (which contains all photos) to the new back up drive. Is this correct?
2. Once we have this old iPhoto library on the new back up hard drive, we could bring it home of course, but then I need to get it into the new hard drive on my wife's MacBook Pro. I'm assuming I can plug this back up drive into my wife's machine, then import the old library into her machine. How do I do this properly?
3. If I bring the old library into the new MacBook Pro hard drive, will it erase the existing iPhoto library on her new hard MacBook Pro hard drive, or will it combine them somehow? She has added of course some pics to the new iPhoto library already, but if we have to delete them it won't kill us. The old stuff that got recovered from the damaged drive is more important.
Thanks ahead.....now to the experts?

Thanks Terence.....
regarding this point:
3. use the paid version ($20) of iPhoto Library Manager to merge the Libraries. that way you won't lose anything.
I have another access to her new photos, whereby I could reload them onto her MacBook if we lose the new library.....so I'll save the $20 and just reload them.....two more questions:
1. So, if I drag the iPhoto library folder from the new back up hard drive to the Pictures Folder in Finder, will that overwrite the existing library folder on her MacBook?
2. After I drag this folder into finder, will iPhoto recognize everything? I assume yes....just checking.
thanks ahead!

Need help converting PDF to a word document!

I paid to have the ability to convert a PDF document to a Word document. When I click on "convert" the area turns gray, and nothing happens. Once before, the document converted, but it did not come out the same. For example, the charts did not convert at all. Any help will be appreciated.

You need the ExportPDF Forum

Need help with pdf file

I have the version Adobe Reader XI and I can't open up a pdf attachment. I tried all the troubleshooting in the help menu but nothing is working. I have to be able to open up pdf file every day. HELP

Okay the pdf file has a little (save) at the bottom of the file and when you click on it, it says (save to my computer) When I click on this it does not give me an option of where to put the file it just blinks for a secondlike it saved it somewhere but when I go into my c drive and look I can't find it or when I go into adobe reader I can't find it so I tried right clicking on the save to my computer and got these messages
open
Open in tab
open in new window
save target as
Now I have tried all of these and it does the same thing. Just blinks for a second like it did something but again I can't find the file. I really would like to just go back to opening the file in my email. Do you think if I uninstalled Adobe reader X1 and reinstalled another adobe reader that might get me back to what I used to have? This just happened yesterday and I have the same browser and haven't changed anything on my browser but I did update adobe reader so I was thinking it had something to do with Adobe reader X1.
If you don't think this will work then go ahead and walk me through saving the pdf file but so far I have not been able to open or save it.

Need help opening pdf files

I have a cd, which I have had for several years, and was able to use until the last year. Suddenly, Adobe Reader (I have tried several versions, updates, fixes, whatever!) says that each and every pdf file on the disk is damaged.
This is a cd that used to be able to start up on its own, and had various menus to get to the final pdf pages. I cannot open the files through windows explorer, nor by going through the menus. Each time, the error message tells me the file(s) was damaged because it was sent via e-mail or some other method that caused the files to be damaged. The problem with that is that the files and the cd were never altered, as the cd is not a rewritable one. It is also not pirated, if anyone is going to ask that question.
The cd is a manual for my vehicle. It has a parts manual, and a workshop manual along with other items. When the cd is put into the drive, it starts automatically, but cannot get a single file open. I have tried this in two different systems, and I get the same results. The strange thing is that I have files made under earlier Reader versions that still work. So why not this one, and why isn't someone at Adobe available to help me straighten this out? Shame on them!

PraveenAggarwal wrote:
I am facing the similar problem. Not able to open some PDFs. Was able to open till 2-3 months back. Did some analysis that not able to open the files created with version older the 9.0 of Adobe Reader. Also tried to open the same PDFs in my colleagues' Laptops and my home PC. No Success.
NEED SERIOUS ATTENTION FROM ADOBE.
You are in a user to user forum. If you want attention from Adobe, you'll have to contact Adobe and pay for the attention, as they don't provide free attention for problems related with the free Reader.
Adobe Reader cannot create PDF files, only open (read) them. If you cannot open some PDFs from within Reader in your machine and others, most probably they are damaged. Are you receiving any error messages when you try to open them? "Not able to open" doesn't say much, really.

Need help on the correct directory extract structure for SP15 .SAR files

Hi all,
With the help of many here I have been able to finally download all the SP15 files I need for my EP 6.0 on WAS 6.40. I am currently on SP11 for both EP and WAS and want to move up to SP15.
I downloaded all the .SAR files and did SAPCAR -xvf all from within a temp directory I created. Yes, some of the LABEL.ASC files were being overwritten.
After all the extracts, I ran SAPINST and it did start, but unlike when I ran SP11, I had options for KM, EP, Tools, etc. This time it only presented me with options for the WAS and the first option was "Import Support Package 15" (with the other options being for dialog instances). There was nothing about EP, Tools, KM, etc.
I ran the Import option and it completed successfully. I then thought it either did everything or if I reran it the other options (for EP, KM, etc.) would now show up. Of course, I was wrong.
So where am I exactly going wrong regarding extracting all the .SAR files into the proper directory structure so that SAPINST runs correctly?
Please help if you can.
Many thanks,
Mike

Hello Mike,
I think you extracted the files for the J2ee engine. Generally you will have a different SAPINST for Portal. Please refer the stack guide for SPS15 Page 22 for the files you need and the procedure to apply it.
satck guide can be found at http://service.sap.com/instguidesnw04 --> under maintenance
regards
Mahesh

Need help saving a rendered video in Premiere Elements 13...

I have a rendered video that I am ready to save to my computer. The last Premiere Elements program I had was 1.0 lol. In 1.0, I would select to export the video as .avi and use that to burn to a dvd. In Premiere Elements 13, "export" is grayed out. What it looks like I need to do now is Publish the rendered video, but I don't know what to select to save it to my computer for future burning to a Blue Ray Disc. I plan on using Nero to burn the video to BD. Any help would be appreciated.

AndyD74
File Menu/Export/Movie is last seen in Premiere Elements 7. Now File Menu/Export/Title remains.
Your export opportunities for Premiere Elements 13/13.1 are in the Publish+Share area of the program. Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates? If not, consider doing so.
What are the properties of your source media on the Timeline that is destined for Nero for your burn to Blu-ray disc format on Blu-ray disc?
Have you considered taking your Timeline directly to Blu-ray disc format on Blu-ray disc in Premiere Elements 13/13.1 using Publish+Share/Disc/Blu-ray?
Depending on your reply to the above, you could explore for your file....
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p___
Publish+Share
Computer
AVCHD
with Presets = M2T - H.264 1920 x 1080i or p____
Please review and consider, and supply more information so that we can fine tune the reply.
Thank you.
ATR

New to Dreamweaver and need help with PDF and Word

I'm trying to put forms on my web page http://www.troop4084.org and I cannot get them to show up on the internet. I have them in the folder. If there is a step-by-step process to do this?

johnnyc54 wrote:
I think so, that may be the issue. I'm still looking at that one to figure it out. My pictures work fine
and I followed the same procedure for the Word/PDF documents...
Your images are in the 'images' folder:
http://www.troop4084.org/Images/Anacortes%20Sign.jpg
The pdfs are neither in the images folder or where the links says they are in the site folder itself.
See the link below - It says the FOS.pdf is in the site folder itself. Not in any other folders.
http://www.troop4084.org/FOS.pdf
If you upload the FOS.pdf to the site folder on your server the link will be correct.
or you can put the FOS.pdf in the 'images' folder and change the link to as below:
http://www.troop4084.org/images/FOS.pdf
or you may want to create a 'pdf' folder on your server and upload the 'pdfs' into that with the link below:
http://www.troop4084.org/pdfs/FOS.pdf

Need help opening pdf file created in japanese adobe

I have Adobe Reader 9. Acolleague just sent me a document that was created in a Japanese version of adobe. It is still a pdf file, but I cannot open it. I get a message saying some components needed to complete thte operation are missing, and would I like to go to the Adobe page on the web to look for them? If I say yes it takes me to the Adobe page, but I can't find anything obvious to add.
In the file's properties, it said the application is [some japanese characters]v1.12Rev0480
Please help

Maybe you need to download and install the Japanese font pack from http://www.adobe.com/support/downloads/detail.jsp?ftpID=3979 (Windows)

Need help saving layer styles Photoshop CS6 Extended for Mac (Mountain Lion)

I have been trying to learn Photoshop. I am using Photoshop CS6 Extended on a Macbook Pro (Mountain Lion). My Adobe software has been updated. I have been doing tutorials using a lot of layer styles. In one of these tutorials, it was suggested that if I would possibly want to use the style again that I should save it. At this point I had entered all my layer styles info and was still in the window with the list of layer styles on the left (bevel and emboss, drop shadow, etc., and the "New Style" button on the right. I clicked on the "New Style" button and when another window popped up asking me to name the style, I named it. When I looked at my styles in the styles panel, I saw the little button for the new style. I saved my graphic and closed it. Later I wanted to apply this style to text in another graphic. The style was used on text originally. When I clicked on it though the style didn't look the same. Upon investigation, a couple of setting under Bevel and Emboss had reverted to defaults. They were different numbers when I saved the style. I could go back in and change these two numbers and get the same results, but I don't understand why these numbers changed on their own -- why the style didn't completely "save." Is there something I have done wrong, or is this some kind of bug? Any help would be greatly appreciated! Thank you in advance!

Thank you very much for your reply! Yes, both documents were at 72 resolution. This morning I tried to save yet another style (same resolution document). It worked when I used it the first time. Then I switched to the other style I had saved. That one took some of the bevel and emboss settings from this morning's style. The numbers which will not save are the angle and altitude under the shading section. Just now I made another document (text at 72 resolution) and both styles had changed these numbers to 120 and 30. Is this something I am doing wrong? I am trying to use text of a similar font and size. I updated my software last night in the hopes that that would help. This morning I reset preferences. Don't know what to do! Thanks for helping me!

Need help saving PDF correctly!

Similar Messages

Maybe you are looking for