Need help setting up ePrint on LaserJet M1212nf MFP

I've gone to the support website and tried multiple times to go through the steps. Granted, I am not tech savy. I am connected to the printer through my new router and I am on the network. When I put the IP address from the printer into the address bar the website opens but I don't see any tab that says "enable web services". What does the tab or symbol look like?
I also went to the firmware and software update page but there are too many choices that I don't understand. My current  firmware datecode is 20100921. My current software driver version is 20100428. Would you kindly furnish me a direct link to the proper update for my printer. I bought this printer new approximately 3 months ago.
I have already registered on the correct website for ePrint, but I need to get an email address generated in order to connect it to my printer in order to use ePrint.
I want to use my iPhone 5 to print occasionally using the email address. Is there any special instructions once I get the email address set up?
This question was solved.
View Solution.

Hi,
Follow the link included in my preview post and click the Download button and follow the steps within the tool to update the firmware, this tool indeed intended for your operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Ok I am having issues with my HP Enby 100 D410. Need help setting up eprint, and keeping connected.

    I opened up my printer, set it up, connected.  But I cant seem to keep connected.  I have an eprint email address set up, but the printer reset and now wants me to set up an new eprint using a different code.  How do I get the [email protected] email back.  It says "someone already has address..."  duh, that's me..!  This printer has been more than frustrating.  HP support says open 7 days a week, 24 hours a day.  But when I call, they are closed and only open during certain days and hours... why advertise differently?  I also cannot seem to get my printer to align the printer cart.. stops halfway.  Need this to test scanner.  Anyone with helpful advice?

    Hey mwright286!
    Sorry to hear you're having a problem with your Envy and ePrint! Let me see if i can address the issues you brought up here. HP support for printers is 24x7, if you are receiving a message otherwise you may be dialing the wrong number or selecting the wrong options through the prompts.
    As for the ePrint issue you're having, if the printer's Web services has somehow been reset and the printer gave you a new code to setup ePrint with, unfortunately that address is not available again for 6 months. Make sure you don't turn web services off and then back on unless necessary as this will reset the email address.
    If your printer is having alignment issues though, it is very possible that there is a hardware problem with the printer. Try following this document. If you are still having trouble with the alignment then you will want to call support at 1-800-hpinvent.
    Hope this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

    Any devices connected to the same icloud account can sync all the data on that account.  For this reason an icloud account is really for a single user.
    On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

  • Need help setting up TV equiptment

    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}

    blondeinneed wrote:
    I have been very ill and I need help setting up my TV, DVR, Receiver, Surround sound systems. I'm afraid if I try to work on all the equiptment, I'll drop my HDTV or other componets because I'm still weak. Can anyone help me? I've called a few places and they want $100.00 to set it up. Give me a break! I know about inputs and outputs and other cables, I just don't have the strength to move the equiptment around. I am willing to pay. Please call me at 813-{edited for privacy}. Thanks, Teresa {edited for privacy}
    Teresa,
    I think the best way for someone to volunteer to help you would be for them to send you a Private Message (PM) here on the forums. You should see a small envelope in the upper right corner of the screen, when it changes color you will know you have a PM to view.
    I would be happy to help, but since I am in North Texas I don't think that is a viable option Sorry....
    Justin
    FiOS TV, Internet, and phone user
    QIP7232, QIP7100-P2, IMG 1.9A
    Keller, TX 76248

  • Need help setting up and configuring rsync

    Hello
    I need help setting up, or rather configuring rsync to sync data between my brand new iMac and my Macbook Air.
    Here is what I would like to:
    - I want all of the files on both machines to be an exact mirror or copy of each other. Basically I have an iMac for at home, and then a Macbook Air for the road.
    - The main folder on both Macs is called 'Sara' and I want the contents (mainly the 'movies' folder, 'music' folder, 'documents' folder and 'pictures' folder) to immediately sync up with each other when both of them are on my home network.
    - this means if I'm working on a file at home on my Macbook, it will immediately write to the same directory on my iMac and vice versa (if I'm working on file(s) on my iMac, it will immediately save the contents to my Macbook). This way, if I'm working on last minute project my iMac, and then have to head out the door to the airport, the file is immediately saved to my Macbook (no usb for USB transfer).
    - hopefully this makes sense??
    Any help is greatly appreciated!
    Thanks

    It's a lofty but unrealistic goal.  Rsync does not run automatically.  There is no realistic method of instantaneously synching two computers over the internet or even on a LAN.
    I would suggest you might try using Synk Pro which, in theory, can keep two devices in sync when they are both on the same network (and both have shared and mounted drives.)
    If you must do this with rsync then I suggest a Google search for rsync tutorials.

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

  • Need help Setting up Multiple Static Ip , 1 for each port of the fios router

    Need help Setting up multiple Static Ip on my fios router
    I have been trying to figure out how to set up multiple ip in my fios router.
    However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
    Verizon gave me 5 static ip but they can not help me how to set it up.
    Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

    You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

  • Need help setting up FCE 4   PLEASE

    OK, I'm NOT a professional, just need help setting up.
    Just purchased FCE 4. Need to set up my Sony HDR SR11. I've already recorded most of my stuff in HD SP. Can someone Please help me set up?
    thanks

    Thanks for the info.
    I updated and did a search in my manual for Log and transfer which didn't go to anything I can figure out. Sorry, I don't have time to read 1152 pages.
    Can anyone just tell me how to get this going? There should be a simple set up correct?

  • My email is not working in lightroom. Need help setting that up.

    Need help setting up my email in lightroom. For some reason it's not connecting.

    Try posting in the Lightroom forum.  People there are more tuned in to the detail working of the application:
    http://forums.adobe.com/community/lightroom?view=discussions

  • I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

  • Need help setting up outlook mail on ipad2

    downloaded the outlook app, need help setting it up.

    Is it actually called Outlook, or is it called Outlook Mail Pro or Outlook Mail Complete or something like that? Those apps are actually by separate companies (ie, not Microsoft), and I don't personally have experience with them, but here are links to their support sites which should have the information you need (or an email address you can write to):
    Outlook Mail Pro: http://support.codebeforedawn.com/customer/portal/topics/38871-outlook-mail-pro
    Outlook Mail Complete: http://www.ikonicapps.com/outlook/
    hope that helps...
    Matt

  • Deperately need help setting up external midi devices

    I need help setting up external midi devices.....Motu828...Midi express...RolandXV3080....Motif rack.......HELP

    Theres not really much to setup. Assuming your synths are connected to the MIDI Express already..
    In Logic, make a new MIDI track. On the left hand side in the track inspector, among the parameters you'll see an option for MIDI Port and Channel. Just pick which port the track is going to, set the channel and device id and play (And be glad you never had to deal with setting up the old Environment window in Logic 5 and below).
    If you really wanna get into it and have all your MIDI ports named after the synth thats connected to it, open up Audio Midi Setup, create a device icon for each synth you have and draw the cables from each device to whatever port its connected to on the midi interface's icon.
    Then in Logic everytime you pick your MIDI port on your track, instead of MIDI Port 1, MIDI Port 2, etc.,
    it would be labelled XV-3080, Motif Rack, and so on.. I dont think theres anyway to do this within Logic itself (you can change the labels on your audio ins and outs, but not MIDI as far as I can recall)..
    If youre talking about having access to patch names and whatnot like Digital Performer and Cubase let you do, Logic doesnt use the xml patch lists everyone else does. The above steps are pretty much all there is to be done as far as MIDI.
    Heres my Audio Midi Setup window for reference.
    Now when I select MIDI Port 1 in Logic its named MWXT, port 2 is SR-16, etc..

  • HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?

    I need help setting up my Imessage and FaceTime.I have tryed and its not working.

    iOS: Using FaceTime
    iOS: About Messages
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting Messages
    iOS: Troubleshooting FaceTime

  • Airprint to HP LaserJet M1212nf MFP from Windows

    Hi!
    I have a HP LaserJet M1212nf MFP, and connected it to the network via Ethernet, and was elated when I saw that I could Airprint  (wirelessly) from all 3 iPhones and the iPad in the family!
    I was not very elated when my 3 windows printers can only ePrint by using attached docs to emails, and then only certain formats.   I would expect this lack of funtionality from an Apple specific printer, but not from an HP printer!
    Through Googleing I saw what I thought was the answer: To fool my PC into thinking it can (wirelessly)  print to an airprinter  through the network, but nothing panned out as being that...
    Really disappointed in HP this time.  Any suggestions?
    Thanks in advance
    Joe

    Hello Joe_In_Missouri,
    Thank you for being an active member of the HP Support community.  I understand that you were having issues printing wirelessly from you Windows computers to your Laserjet M1212nf.
    I see you have received a solution on how to do this on another thread. If you need the link again you can find the solution here.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP LaserJet M1212nf MFP Printer - Communication Failure with the scanner

    Dear all,
    May I kindly ask if there are any known resolutions in terms of a scanning issue with the HP LaserJet M1212nf MFP Printer?
    When it starts scanning the printer only scans the up to the 3rd or 4th page, it stops in the middle of the sheet and produces an error message stating the following: Communication Failure with the scanner.
    Are there any steps that may be followed in order to resolve the incident?
    Many thanks in advance.
    Best regards,
    Ryan

    Hi @Ryan_HP ,
    I see that you are experiencing a communication error during scanning of multiple pages. I would like to help, but I will need some more information to provide you with the correct steps to resolve this issue.
    If you are using Windows, download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    Temporarily turn off any Antivirus Software, just to rule out any interference.
    Try scanning again.
    What operating system are you using?
    How to Find the Windows Edition and Version on Your Computer.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Ethernet)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    What scanning software are you using?
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for