Need help with after effects render engine setup

I use AE CS6 on a mac computer running Mountain Lion. I also own a PC running Windows 7, and I am wanting to use it to assist with network rendering. How do I install the after effects render engine on a PC, when all that I own is the Mac version of the software?
Any help would be appreciated

Did you purchase a perpetual license for the software, or do you have a Creative Cloud Membership subscription?
If the former, you need to purchase an additional license to get the Windows version. If the latter, you can just download the Windows version as part of your subscription.

Similar Messages

Need Help With After Effects. Please read.

Hey,
So I'm using after effects cs6. The problem I have with it is that the final video after exporting stucks in between and never runs smoothly. I exported my almost 7 minutes video as a quicktime file that is (.mov). SO whenever I play the video in quicktime or any other player, it stucks, sometimes i pause it but it pauses after 10 seconds i click the pause button. sometimes the voice is ahead of sound and vice-versa. It doesnt stuck at the same point everytime. I need my video to run smoothly. Can someone please help.
Appreciate your reply.
Thanks

FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?

Hi i need help with After effects 7 please

Hey i have installed AE7 but days later this error appears and i cant open the application, can somebody help me?
after effects warning: unknow BIB error. Invalid cncoding, BRV, 0

It may be a hard disk problem.
Check your disks before installing.
Dual G5 @ 2GHz Mac OS X (10.4.5)

After Effects Render Engine Loads project over network then closes? Any advice please?

Hi,
I have just started trying to use the After Effects Render Engine over the network. I have followed some online video's where you have to set the main project computer as Multi Machine output etc and then collect folder to a network drive then go to the node computers and open Render Engine and go to watch folder and point it to your files on the network drive. It finds the project and opens it but then instantly closes it and then continues to search.
Where is this please?
Also I can't seem to tick "Skip Existing Files" in my project
Kind Regards
Joe

There is no built-in network render features in AE, so we probably need to see that video you are referring to.
A wild guess though, is that you are trying to render a video file, instead of an image sequence. "Skip Existing Files" only works with sequences. Anyway there is, to my knowledge, no way to make several machines write to the same video file. But you can start the project rendering an image sequence, from multiple computers, to the same network folder, and then use the "Skip Existing Files" feature to prevent overwriting the frames.

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Help with After Effects

I just upgraded to PP CS4 to CS5 Premium with After Effects and Photoshop. I'm trying hard to figure things out but I'm unfamiliar with these programs and have no idea where to begin to learn. I've tried watching various tutorials, but they skip over basics, and unfortunately, that's what I need. I
Can anyone recommend a really good book or video or something to get me started? I know there's so much to learn and I'm so eager to learn it all. However, I don't even know how to get the footage from CS5 to After Effects.
One more question - I'm working on a video right now in CS5. The girl in the video has rosacea and I want to take the red out of her face. Is this possible in After Effects? If so, can someone please tell me how to go about doing it - or suggest a tutorial that deals with such an issue?
Thank you so much,
Jules

> Do you have any idea which tool in after effects I would use, and how,
to remove color from an area on a video and blend it with the
surrounding area. Or if anyone knows of a tutorial explaining that
process I would so appreciate it.
You should ask your After Effects questions on the After Effects forum:
http://forums.adobe.com/community/aftereffects_general_discussion
Here are two video tutorials that show different ways to selectively apply an effect to a specific area:
https://www.video2brain.com/en/videos-1501.htm
http://www.peachpit.com/podcasts/episode.aspx?e=8822f9a1-93c5-4a00-8697-a54b653c7aaf
But you should really begin at the beginning and learnt he basics of After Effects first.

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Need help with gunshot effect in FCP

New to FCP and am trying to add a gunshot effect to a short film. Doesn't have to look top notch...just looking for something simple.
I added a muzzle blast for the shooter from detonationfilms.com, which worked great. When i overlayed the muzzle blast, the background was black. I was able to fix this by using Modify>Composite>Screen.
Now I'm trying to add the bullet hitting the victim, but all the shots from detonationfilms.com have white backgrounds. For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? Are there any other websites that have bullet hits with a black background? As I said, I'm not too picky.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple).
Thanks! Much appreciated.

welcome to the family. We're not really here to help you with practical effects and filmmaking tips, we're here to help you with the software. But we'll see who shows up.
For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? < </div>
Screen drops out black pixels. It's not really the best way to get luma key effects but it's quick and easy for high contrast effects footage that is delivered on superblack. Try a luma keyer to key out the white.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple). < </div>
Should have been done as a practical effect while shooting. A simple squib and blood packet would have been FAR easier to deal with than rotoscoping and hand painting. You need After Effects or, if you have Motion, crack the manual and get set for some long sessions. There is nothing simple about handpainting on a moving object.
bogiesan

Help with After Effects CS6 error please?

I'm working on a kinetic typography project in CS6 as my final assignment for my Motion Graphics class. It's nothing too complex, just some text to some song lyrics and I decided I wanted to do some camera movements around the text but when I checked the 3D box next to the layers, I get an error message,
88:3, "error: TDL:outline contains triangles that are too small to be rendered. Check for very thin triangles in original artwork."
I literally only have one background picture and then quite a few text layers but that's it.
Any help on how to fix this would be greatly appreciated!

I'm still kind of new to After Effects and working with vector so I apologize if I'm not too savvy with all of this. Here's a screenshot of my composition if that's of any help.
*Edit: Oh and my text doesn't need any extrusions, the only 3D transformations I've made to the text layers is "pulling" their positions a little closer on the Z axis.

Help with   After Effects CS6-

I did something to piss off after effects -    not sure what I did exactly I was trying to make an after effects icon on the dock ( I have a MacBook pro running mavericks )
I have a subscription to the creative cloud - and have downloaded after effects CS6 . but....
   Now when I try to open one of my After effects projects it says " Error message - something about I need to uninstall the older version of after- effects , - and then it listed a preset ( blur)
and when I close the window , there were approximately 30 similar windows with the same message , but a different preset,( blur this or that )
So like an idiot I went to my applications and dragged my after effects app icon to the trash ( there were two of them) and then emptied the trash- Now all my After effects files are greyed out with small green text that says "exec"
what should I do? I cant opn my AE   (after effects) files, I went to the cloud to re-install it and it says it is alll updated , should I do a uninstall? How do I do that?   can I do that and then re-install AE CS6?     will adobe make me download the newer CC version?   I dont want that version because all the computers at my school run CS6
Can someone advise me what the next step would be?
Im grateful for this forum.

Run the Creative Cloud Cleaner Tool and reinstall. Also learn to name your files sensibly - using $ in a file name may simply be interpreted as a variable by the operating system.
Mylenium

Help with after effects Please

Im trying to leran how to make 3d photos in after effects .
Unfortunatley i cant find any instructions that help me with my problems when i import my layered photoshop document and double click the composition layer i just get a huge black box in the middile of the screen.
i can view the layers individually but not as a whole to play with. is there a 2d to 3d book for dummies? ha ha
can any one help????

If your imported file is not working the color space is probably not RGB. AE only works properly with RGB files.
I think you are looking for 'the kid stays in the picture' / or more accurately, camera mapping or camera projection techniques. This is where you separate the foreground background and middle ground elements of a photograph into separate layers, bring them into a 3D app like AE's 3D space, distribute them in 3D space, and then animate a camera move on the layers.
There's a plug-in from Video Copilot that kind of automates this process and that works very well for certain photographs. Photoshop's vanishing point tool can also be used, or you may do all of the work of separating layers by hand (my preferred method 95% of the time) and bring the PSD into AE as a comp, convert the layers to 3D, distribute them on the Z axis, add a camera and animate the camera.

Help with after effects cc application manager error

ok i have a issue when i install adobe after effects cc it comes up with cant start trial application manager is damaged or corrupted and i downloaded adobe aplication manger 8 and it gives me this error
does anyone have any ideas as i lost on what to do now
thanks in advance elfen

After checking we performed the test Next:
          Remove all fonts except the original.
          Test opening After Effects project => OK
          Then we submitted the most used by the graphics progessivement fonts.
The problems is many Fonts, Thanks for your help Will
Cdlt

I need help launching after effects! PLEASE READ

Everytime i launch After effects it says this: The licensing library encountered an error; you may need to reinstall. and After Effects can’t continue: unexpected failure during application startup! Someone any ideas? By the way I'm using a iMacBook pro

if that's the exact error message, you'll need to troubleshoot the install logs, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
if that's not the exact error message, attach a screenshot of it, http://forums.adobe.com/message/4209263#4209263

Help with After Effects error 213:11

I try to open my project on after effects and after effects wont open. It tells me that and says to restart my computer which I have tried many times to no success. I have reinstalled it twice and still doesn't work. Please help.

You have not actually told us any relevant technical details liek what computer we are talking about. This is a licensing error, so from a botched instal lto something on your system blocking the licensing services anything could be going on, but based on your non-info we just cannot know.
Mylenium

Help with After Effects? Null Layer and Text not working?

In after effects cs5.5 on mac, im motion tracking as normal, and the track works fine, then when i add the null layer and edit the tracking target to the null layer, the screen goes black, and all i can see is the null layer as a red box moving along the motion track path (i cant see the path) also, whenever i try to add text, (which im trying to motion track via attatching to the null layer) the text is invisible, when the screens black, all i can see is the wire frame of the text next to the square null layer, im pretty new to after effects, but im following tutorials as i should, and its just not working as it shows in all the videos ive tried, please help!

Check whether you have wireframe mode enabled/ Live Update disabled. Sounds like one of those cases. Other than that this could be OpenGL issues, so turn it off in the prefs. Also check your comp size vs. the size of the footage you are tracking. Tracking works relative to the layer, so if the comp is too small, the values would be so large they end up being outside the comp.
Mylenium

Need help with after effects render engine setup

Similar Messages

Maybe you are looking for