Need help with deciding on witch phone to get

Need some help with figuring out what phone to get? I’ am set on getting the DroidX and my wife wants the Droid 2. So here is my question? The Droid 2 is showing it can expand out to 40Gig has a drop down keyboard ect but what I don’t see is that it can do GPS.
Can the DroidX memory be expanded bigger the 16 gig. I have lot of questions just need some answers
Thanks

Big_Ron wrote:
I would love to go play with one. But I’m currently deployed  over sea’s with the Navy right now due to come home back to the states in a few months and I’m looking for a new phone, the one’s in Japan suck and so does the service. Can’t wait for an American phone. I compared both phones on the version website and it shoed the Droid x to support VZ navigator. And it showed the Droid 2 to be expandable to 40 gig. My wife wants the keyboard I personally don’t like the drop down keyboard. Is there any thing else you all can tell me every body has been extremely helpfully. But at this point it looks like I’m going with the droid X and my wife will be getting the Droid 2. What about sound, camera is the touch screen accurate?   
Thank you for serving the U.S. Navy!
I hope you do enjoy the new Droid X and your wife enjoys the Droid 2. Remember this....you both have 30 days to try out the phone. If you don't like for whatever reason or something is wrong with it just exchange it. This is nice because you can pretty much test out the phone & see if it meets your needs/wants.  Not sure about the sound or camera. For touch screen I have read it is pretty responsive. Have you ever owned a touch screen before? If not it may take a little time to warm up to the touch screen part. Just remember, practice makes perfect for typing on the touch screen and other things. I  think the Droid X has swype built into it which makes it easier to type on

Similar Messages

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • Need help with Flash CS4 buttons/can't get buttons to control anything

    Hello,
    I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

    Thank you.
    Regards,
    Michael J. Sheehan  allelois
    Date: Mon, 17 Aug 2009 18:48:09 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
    Hi there
    I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
    Cheers... Rick
    >

  • Need help with synching 2 different phones.

    Hello I have a N82 and a 6085. In a nutshell I want to have the same information (contacts with numbers and aaddresses) on both phones. What confuses me is the difference between synching with the nokia synch application,Microsoft Outlook, and Nokia Communication center.
    I only recently found out that you can't save addresses on the SIM card, it has to be on the phone memory. What I also didn't know is if you have the names and adresses in the phone memory and on the SIM and you don't select Phone or SIM only the phone displays both. I was wondering why I had so many duplicate entries.
    OK but back to the main problem. Where does Nokia Communication Center get it's list from? How about regular Synch? 

    Try to directly transfer from 6085 to N82. To do this, turn on the Bluetooth of both phones and make sure that the 6085 is set to Visible to all. Then start:
    Tools > Utilities > Switch
    Folow the steps. Basically it will ask what sync you want, so select Download (the middle button in case the Wizard does not start). 
    If you want to use computer, then Syncing is not you need. You need to use Content Copier. Start it and make a backup of the 6085. Then connect the Nokia N82 and use Restore, choosing the backup file of the 6085.
    Message Edited by kamenlitchev on 24-Jan-2009 04:32 PM
    Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
    If I've helped, use the Kudos button to thank

  • NEED HELP with an unlocked cingular phone

    I just recently bought an unlocked Cingular palm Treo 750 on ebay. And actually I like the phone but I can not get it to do what I need it to do. I use Suncom as a service provider, who just recently merged with T-mobile. I went to Suncom and they supposedly set everything up so I could get on the interenet. Well....... I can not get any page to come up. It says that the page cannot be displayed and to check the connection. I went to suncom again who told me that unlocked Cingular phones do not work well with suncom and there was nothing they could do. I want to use this phone to help me with my college work and I can not. Does anyone have any type of suggestion for me. I am sooooo frustrated. I have been with suncom for many years but this makes me mad. Can ANYONE HELP ME???
    Post relates to: Treo 750 (Cingular)

    Hello and thank you for using the Palm Help Forums!
    I am very sorry you are having these issues and have a few suggestions that may resolve your issue.
    Make sure the SIM card is inserted correctly before continuing.
    First, you may want to contact T-Mobile to make sure they have the right device provisioned onto their network and that the Treo 680 is supported.
    Second, you could have a bad SIM card. SIM cards are usually free at stores. See if they can swap it out and if that resolves your connection issues.
    Thrid, try a hard reset. A hard reset will erase everything off the device so be sure you backup your data on a computer via hotsync. For further
    instructions on how to do a hard reset, go to kb.palm.com and search for article # 42094 in the solution ID. search field. Before you add any data back onto the device make sure you are able to establish a connection to the T-Mobile network.
    If none if this works, you may have recieved a defective device from ebay. I hope not though.
    Well, I hope one of the suggestions resolve your issue. Let me know if you have any further questions.
    Post relates to: Centro (Sprint)

  • Need help with buttons in a phone simulation

    Hello
    I have built a telephone interface to be used for training in a Call Center.
    I am attempting to allow the user to press on the numberpad to enter passwords and such.
    It is only a simulation and will only work if the user presses the correct buttons.
    I am able to create the simulation when the user presses different buttons such as 1234
    but I need them to press 0000 (zero 4 times)
    I am not sure how to do this...
    I have been playing around with the advanced actions, which has allowed me to accomplish the hide and show actions when the user clicks a button, but wondering if there is a way I can
    have them click the 0 on the dialpad so each time it brings up the next zero
    once its gets to the 4th one, it will advance to the next slide...
    Hope that makes sense
    I appreciate any help or advice
    thanks
    Melissa

    Hi there,
    What I did, I took a variable 'counter123' and assign '0' value to this variable.
    I then added a button with Advanced action, I am sharing the Screenshot of the advanced action panel.
    Screen shot 1 :
    Incrementing the Value on click :
    The value of the variable should increase on every click, so lets add a true statement as a condition.
    Screenshot no 2 :
    As normally on buttons/click boxes, the project will continue as soon we click them.
    lets compare the value of our variable and then pause the project.
    Screen shot 3 :
    last if our purpose is solved, here we have clicked the button 4 times, so that has updated the value of our counter to 4, so as soon as the counter exceeds the value, we want the project to continue.
    please let me know if this helps you.
    This will help you in pressing a button 4 times, and i think you can also add actions to show and hide 'zeros' in your project.
    I find such scenarios very interesting and I always find help on Lilybiri's Blog : http://lilybiri.posterous.com/
    Thanks

  • 10.9.5 update issues -- need help with sync to LG phone

    1. Can't sync contacts from imac to Gmail. End goal is to sync contacts to LG phone
    2. Notes missing after update
    3. Not all calendar entries show up on LG phone

    While 2 GB is the absolute minimum to install Mavericks, if you want to do anything with the Mac you need more then that. Upgrade your RAM.
    Until you upgrade the RAM seriously consider shutting down the Mac nightly. You should also seriously review the items in the User Login Items to see if there are any there that you really don't need to have startup with your login to reduce the amount of RAM you are using.

  • Need help with question about upgrading phone

    Okay, so, here's what's going on:
    I currently have a Samsung Galaxy Nexus on Verizon.
    It's dying/freezing/battery life is terrible. Looking to upgrade.
    I don't have an upgrade available for my line, but my wife does.
    She's giving me permission to use hers, which a Verizon rep told me is fine.
    I want to use her upgrade to get a Samsung Galaxy Note II.
    The best price (subsidized) right now is on Dell's site ($169.99), which I could price-match at Best Buy (employee confirmed this). However, it's still a little high for me.
    I could get a better price by adding a line with this device - shave off $40 ($129.99).
    So here's my question: is there any way to add a line, get some immediate savings on the purchase, then immediately cancel the line (maybe only taking a little bit of a hit, getting most of the cost reimbursed for not using it)? In other words, how can I get this phone as cheap as possible?
    Thanks for your suggestions!

    If you add a line as you suggest, that new line will come with a 2 year (24 month) contract for service that will have a $350 Early Termination Fee (ETF) if you cancel the line immediately like you indicated.  There goes the thought of getting the Note II for the cheaper than the upgrade price.
    I recommend going with the price match upgrade @ $169.99 at Best Buy.  I can confirm they do the price match.  I bought my last phone from Best Buy and they matched the Radio Shack price I brought them and  I had a good experience.
    Good luck.

  • Need help with deciding digital options... creative ddts-100, ddts-610, x-fi i/o cons

    I think i have narrowed down my options for upgrading my computer audio... except i am not sure which way to go and would like some help or ti
    ps.
    ... thanks.
    first off i mainly game and listen to music on the pc or listen to the music while gaming... i currently have the logitech z5300e speaker system, creative labs x-fi fatalty pro gamer sound card... i wanted to purchase a receiver to go digital except thats a bit too much for me right now, if i was to get a receiver it would be for my home theater. so i looked around and came up with a couple alternati'ves, except i am not sure if these options will work with what i have now...
    ?st option, i could go along with getting a creative labs inspire digital 5500 speaker system because that sytem comes with a decoder box that creative labs no longer makes... this decoder box has 2 optical in, coax in, also has a adaoter that connects the speakers to the decoder box as well... runs around 200.00 dollars?2nd option, i found on creatives website a new decoder called the dts-60 except this option would require a receiver because this newer model does not come with the speaker adapter as the dts-00 does... but since i am going to upgrade my home theater receiver i would have that one to use with the coax connections. this option runs 00.00 dollars?3rd option, i? found on creatives website a x-fi i/o console so far from what i read it works with my sound card ... i am still not sure if i can just connect the speaker cable to the console but this would run 80.00?4th option , on there website there is also, a dribe bay x-fi i/o upgrade. not sure if it will work with my soundcard but i was thinking it may be an option to use cause the card i have has built in decoders i think..
    ??what would you guys do ?

    dont buy creative ...no support from them

  • HT200150 I need help with the Find my Phone application

    We found my daughters phone using the Find my Phone application. Before we found it, I locked it so that no one could use it. Now I am in able to unlock it because I can't seem to remember the password. Is there anyway around this?

    If you found the phone and cant remember the password, you will need to plug it into itunes and restore it to factory settings.
    Ryan

  • Need Help with deciding 2x512 mb dual channel ram for k8n neo4/sli plat

    Ok well i was hoping someone here could help me out,  I want to get 2 sticks of 512 of ddr 400 ram for under 150 dollars  i was thinking corsair xms or Ocz
    these are the 2 links i was looking at
    http://www.newegg.com/Product/Product.asp?Item=N82E16820146883 (tighter timings)
    http://www.newegg.com/Product/Product.asp?Item=N82E16820145466  ( i like the lights lol  )
    If you could please comment on these 2 products, or if you have better choices please tell me
    Andrew

    Damn! Those are some great prices!
    If I had only those two to choose from I'd go with the OCZ.
    Myself, I'm a Mushkin fan, it's a little more $$ but at those prices, I may even pick up some more for my new build. I've paid over 200 for mine each time, so 166 is a great price.

  • I need help with ISIGHT!  I can't get it to work with MSN!

    HI,
    My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
    My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
    I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
    ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
    Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
    THANK YOU

    Microsoft's Messenger for Mac (MSN) does not support webcams at all.
    I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
    aMSN can be found here: http://amsn.sourceforge.net/
    macam can be found here: http://webcam-osx.sourceforge.net/
    The speed is substantially faster and it is far more stable than Mercury in my experience.
    The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

  • Now I've really done it.  I need help with iPhoto as I can't get into it at all.

    I sent a request earlier regarding my MacBook Pro.  I was trying to set up both computers so that I could network, mainly wanted to send my photos from the iMac (running OS X 10.6.8 and iPhoto '08).  After some trials I got the two computers so that they appeared to be networked.  I set system preferences so that PICTURES was what would be shared between the iMac and the MacBook Pro (running OS X 10.5.8 and iPhoto '11).
    I had both computers set to recognize each other, the passwords worked, and I thought that was it until I was ready to move my photos from the iMac to the MacBook Pro.  Before I knew what was going on, the MacBook got busy on its own and informed me that it was busy and that iPhotos had to do some updating because the photos (which I then assumed were the ones on the iMac) were too old as they were.  It took some time, during which I noticed that when it got to the point of updating faces there were a couple of faces I didn't think I had seen in my MacBook photos.  I let it finish what it was doing.
    HERE IS MY PROBLEM:  When it finally got finished I couldn't see any new photos on the MacBook, so I went to the iMac to see what had been done there.  Big surprise!  When I went to open iPhotos I got the message "The iPhone Library is locked, on a locked disc, or you do not have permission to make a change to it."  No matter what I tried I couldn't get into it, so I don't know whether I have photos any more or not.  
    As luck would have it, my extended warranty for technical help expired in June 2011!

    Locked disk issue:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My firefox crashes every 2-5 minutes for unknown reasons. its getting really annoying and i really need help with this :( i cant seem to get an ID on the crash report, its giving a different reason everytime.. i think. please help !

    i have many many crash reports and they all seem different. yet, whenever i search the support pages for help on those crash IDs it shows 0 results. alot of people are having the same problems, and i hope we ALL can get help on this. its getting really frustrating and annoying :(

    i doubt it is from skype. i havent used skype in 2 days or so.
    here are the crash reports IDs from JUST today..
    bp-8c7fab55-79c8-4db1-9527-4ba072111013 10/13/2011 4:51 PM
    bp-db6bf6c4-cf34-4eae-a742-105842111013 10/13/2011 4:51 PM
    bp-f28611cf-3ff0-4658-a843-05da92111013 10/13/2011 4:32 PM
    bp-03fa57ef-580d-4f1d-8fb4-52ac72111013 10/13/2011 4:21 PM
    bp-d07e0d82-df2a-41c8-a19b-bb99e2111013 10/13/2011 4:19 PM
    bp-fafbd8cf-6769-4b76-8153-c17242111013 10/13/2011 4:06 PM
    bp-ee9694ab-585b-4963-8b94-e46432111013 10/13/2011 3:47 PM
    bp-773242e1-a87d-4e19-90cb-ce4e52111013 10/13/2011 3:37 PM
    bp-6bae0db3-895b-4239-8a71-758ce2111013 10/13/2011 3:36 PM
    bp-6dfc1b57-5a8f-4244-baa1-8d0642111013 10/13/2011 3:36 PM
    bp-9a6589cd-0e2f-4299-b517-a6c862111013 10/13/2011 3:31 PM

Maybe you are looking for