Need help with EXS24 "read velocity range from file name"

I am trying to import 127 drum samples to a single key using the option shown here. The option says "Map to key dropped on and read velocity range from file name". I can find no documentation in the manuals on how to do this. What is the syntax required in the file name to make this work? I need to do several of these imports. The capability is cleary there, but I need help on how the file name should be formatted. My thanks to anyone who can help.

Hi
Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
http://www.redmatica.com
CCT

Similar Messages

EXS24 read root key from file name only

Has anyone encountered this with EXS24 in Logic 7? If you set preferences to "read root key from file name only" then EXS reads the root key from the file itself when loading samples. On the other hand if you set them to "read root key from file only" then it reads the root key from the file name. Or am I just imagining this?
P.S. if anyone from Apple is reading, could you please update EXS24? It's a bit primitive by today's standards.

Hi
Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
http://www.redmatica.com
CCT

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

Need help with Adobe Reader 11.0.0.8 and Group Policy Objects

I am trying to deploy Adobe Reader 11.0.0.8 using Adobe Reader.
I am using the AcroRead.msi I found in
C:\Program Files (x86)\Adobe\Reader 11.0\Setup Files\{AC76BA86-7AD7-1033-7B44-AB0000000001}
HOWEVER
Instead of installing 11.0.0.8 it installs 11.0.0.0
I have not had anyone complain about it asking for an update. But I'm sure it's only a matter of time. (I know about the customization which could prevent the updates, but I can't figure out how to get the correct version installed is the issue not the updates).
So if I run the Setup.exe it ends up installing 11.0.0.8 but AcroRead.msi I think only installs 11.0.0.0
Obviously you can't give a GPO an .exe so it's a closed loop. You can't use an .exe to install the proper version. And you can't install the proper version because you can't use an .exe
You can only use the .msi which apparently only does 11.0.0.0
I've been trying this that, have done jumping jacks and back flips trying to fix this (tried different versions, different approaches to this, nothing seems to work)
Need some help. THIS IS WAYYYYYYY WAYYYYYYYYYYY Overcomplicated btw, shouldn't be this complicated for something so mundane.

A couple of approaches and all involve a bit of work.
Three steps:
Do the install of the 11.0.0 MSI at the command line
Then follow it with the 11.0.07 Updater MSP at the command line
Finally the 11.0.08 Security Patch MSP at the command line.
AIP
Create the AIP from the three files above then then run the MSI from the command line.

Need help with Adobe Reader 9

About three weeks ago my computer started acting crazy so I tried to run updates but I could not get on the internet because the comcast guy told me that it was my firewall. So I disabled my firewall and put on windows firewall and was able to do my updates, but then my antivirus quit working so then I uninstalled it and tried to reinstall but I could not. So I got mad and tried to restore to my last restore point but it would not let me, so when I went to run check disk Windows popped up and said it could not perform this action because the disk was busy.So I then called my friend whorepairs computers and he came over and ran combofix and installed a new antivirus. Combofix said nothing was wrong, but I still can't do system restore or checkdiscso I ran MalwareBytes and it comes up with nothing. So now all of a sudden Windows is telling me that Adobe reader 9 is corrupt and unreadable. Everytime I try to uninstall it, it won't let me. Everytime I try to install a newer version I can't because a pop up comes up and says I alredy have the file, but I can't use it to read my PDFs for class. Adobe reader 9 is messing my computer up and I need help removing it?

Hello,this is me again. I ran Windows install utility cleanup and basically uninstalled all Adobe files, but when I was done I went into the program files on C drive to delete Adobe file and it gave me an error that said: An unexpected error is preventing the operation.Make a note of this error code,which might be useful if you get additional help to resolve this problem.Error 0x80070091: The directory is not empty. And I still cannot run check disc because it tells me that the disk is busy.

Need Help With RSS reader...

First off, I'm a beginner. And I would love some help with
this problem.
I've uploaded the RSS reader to my server, designed it, etc.
And It will not load the feeds. I've searched through the forums,
and have come to discover that it is a security issue (one which is
undoubtedly beyond me). Is it possible to get this to work? I read
in a previous post that there is a way to use it with a javascript
code but I'm not sure how to allow this to work.
My site can be found at
http://www.thecassidyfeed.com
I'm fairly confident that all my paths are correct. All of
the files, the javascript files, etc. are located on the root
level. Could it be something with the server? I know that it is
possible that: " url_fopen_disabled " needs to be enabled. My
server is with MediaTemple.
I would very much like to use this framework, and I look
forward to seeing my site up and running. If there is anyone who
would be kind enough to point me in the right direction I would
very much appreciate it.
lauren

If you look at
http://www.thecassidyfeed.com/feeds.php?id=19
you will see something is amiss...

Need help with the hover over images from small to bigger

I read the tutorial about the hover over the small image shows a bigger image. I thought I would try it own my own but it did not work, do I need to make a link to the CSS file or do I need to do something different. Please help

Here is the tutorial link:
http://www.dreamweaverclub.com/dreamweaver-show-larger-image.php
This is a pure CSS Image Swap without the need for JavaScript behaviors.
It places the thumbnail image on a page with a "nolink" link or anchor so the CSS hover rule can invoke the appearance of the larger image inside an absolutely positioned division (APDiv) layer.
Paste the CSS code into the top of your page between the <head> and </head> tags.
<style type="text/css">
/**image to large**/
#picture {width:100px; height: 250px; background-color:#ffffff;}
#picture a.small, #picture a.small:visited { display:block; width:100px; height:100px; text-decoration:none; background:#ffffff; top:0; left:0; border:0;}
#picture a img {border:0;}
#picture a.small:hover {text-decoration:none; background-color:#000000; color:#000000;}
#picture a .large {display:block; position:absolute; width:0; height:0; border:0; top:0; left:0;}
#picture a.small:hover .large {display:block; position:absolute; top: 90px; left:150px; width:200px; height:200px; }
</style>
Paste the HTML code between the <body> and </body> tags:
<div id="picture">
<a class="small" href="#nogo" title="small image"><img src="small-image.jpg" width="125" height="83" title="small image" />
<img class="large" src="large-image.jpg" title="large image" /></a>
</div> 
Change small-image.jpg and large-image.jpg to your own.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

I need help with adobe reader can someone please tell me what to do?

I am having a problem with Adobe Reader 9.3.2 When I try to install, it
begins installing, but then stops and the error messagy states
"Adobe download manager is currently installing an application,
Once installation is complete stop installing all other
applicaitons." I don't know why I am getting this message. I am unable to read
any PFD files, I am unable to uninstall download mgr or Adobe Reader.
Both show up on my add/remove program, but when I try to remove Reader
I get the message that "this path package could not be opened. Verify that the
path packae exists and that you can access it" I have no idea how do to this.

Use the executable installer without download manager
Reader 9.3: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.msi
update 9.3.1: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.1/misc/AdbeRdrUpd931_all_incr.msp
update 9.3.2: http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.2/misc/AdbeRdrUpd932_all_incr.msp

Need help changing the setting to preview entire file names

Using Leopard, I would like to to be able to read the entire name of a file.
For example, my files might say (File 2.....609). What the file is named is File 2 Graphs 6209. How can I set up Leopard to allow me to read the entire file, so I don't have to guess the file?

Ah! I tend to avoid using column view for folders containing items with long names, because it increases the amount of horizontal scrolling needed to see everything, & because I'm usually interested in seeing & sorting items by the non-name columns available in list view.
FWIW, I tried the column view drag handle double click tip on one of the folders containing some of my extra long named items & it does expand to show the entire name, but I don't care for the result: the Finder window expands horizontally so much that it won't all fit within even a 24" widescreen display! So not only do I have to scroll the window's content horizontally to see everything, I have to move the window partially offscreen to do so. That is too much of a chore to make this a very good alternative for long path names.
It occurs to me that there might be a more elegant, subtle, & "it just works" Apple-like solution possible: instead of just abbreviating the displayed item name by replacing enough of the middle characters of the name with an ellipsis to make it fit, it would be cool if this were adaptive & tried first to abbreviate the non-unique parts of the name, relative to all the items in the column. So if say 3 files in a view contained the same 12 character sequence, that sequence would appear with the same abbreviation in each file, more frequently preserving the display of the unique parts of each file name.
Does this make sense?

Need help with an automating a "Message from webpage" click.

Any help would be appreciated. I guess I would consider myself as a beginner with VB.NET.
Basically - My program launches an internet explorer window. Points to a specific webpage that has records. Finds the "check all" and clicks it, then finds and clicks "delete".
I am stuck at this part. A "Message from webpage" pops up wanting to confirm the deletion of the records. I have 50 records per page and an excess of 14,000 records each day that need to be deleted. I do not have time to click OK on every single
page.
I have tried to sendkey function, which worked for a while but for some odd reason, it quit working. Someone suggested using API, which I know nothing about. Please help me! I am desperate!
Here is my code. I know the "threading.thread.sleep" isn't good to use but I need someway to pause. Like i said, I am a beginner, so please be easy!
Public Class Form1
Dim oInputs As Object
Dim oWShell As Object
Private Sub btndel_Click(sender As Object, e As EventArgs) Handles btndel.Click
With CreateObject("InternetExplorer.Application")
.visible = True
.navigate("WEDPAGE GOES HERE!")
Threading.Thread.Sleep(3000)
oInputs = .document.getElementsbytagname("a")
For Each elm In oInputs
If InStr(elm.innertext, "(Un)Check All") > 0 Then
elm.click()
Exit For
End If
Next
For Each elm In oInputs
If InStr(elm.innertext, "Delete") > 0 Then
elm.click()
Exit For
End If
Next
Do While .busy Or .readystate <> 4
Threading.Thread.Sleep(2000)
Loop
End With
Dim objShell = CreateObject("WScript.Shell")
Dim Success = objShell.AppActivate("Message from webpage")
Do Until Success = True
Threading.Thread.Sleep(1000)
Success = objShell.AppActivate("Message from webpage")
Loop
Application.DoEvents()
AppActivate("Message from webpage")
SendKeys.Send("{ENTER}")
End Sub

Hi msnyder1112,
Thank you for posting in MSDN forum.
Since this issue is related to the VB.NET, so we will move this case to VB forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vbgeneral , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need help with select that month range with flexible first date

Hello everyone,
I am trying to create a selection of month range (will be in a WITH clause) for a report to display monthly data. But the first month start date can be any date. (Not necessarily the first date of the month)
Examples:
Report input parameters:
Start Date: 08/10/12
End Month: Dec 2012
I was trying to build a with select that will list
Month_Start, Month_End
08/10/12, 31/10/12
01/11/12, 30/11/12
01/12/12, 31/12/12
OR
Month_Start, Next_Month
08/10/12, 01/11/12
01/11/12, 01/12/12
01/12/12, 01/01/13
End month is optional, so if no value the select will list only
08/10/12, 01/11/12
Oracle Database Details is
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
My code so far is
VARIABLE P50_START_DATE VARCHAR2 (10)
VARIABLE P50_END_MONTH    VARCHAR2 (10)
EXEC :P50_START_DATE := '10/10/2012';
EXEC :P50_END_MONTH   := '31/12/2012';
SELECT to_char(:P50_START_DATE) AS start_date
        , ADD_MONTHS( TRUNC(to_date(:P50_START_DATE,'DD/MM/YYYY'),'MONTH'), 1) AS next_month
FROM dual
union
   SELECT to_char(ADD_MONTHS( TRUNC(to_date(:P50_START_DATE,'DD/MM/YYYY'),'MONTH'), ROWNUM-1)) AS start_date
   ,      ADD_MONTHS( TRUNC(to_date(:P50_START_DATE,'DD/MM/YYYY'),'MONTH'), ROWNUM) AS next_month
   --, rownum
   from all_objects
   where
   rownum <= months_between(to_date(NVL(:P50_END_MONTH, :P50_START_DATE),'DD/MM/YYYY'), add_months(to_date(:P50_START_DATE,'DD/MM/YYYY'), -1))
   and rownum > 1If I put comment – on line and rownum > 1, as
-- and rownum > 1The result I get is
START_DATE                     NEXT_MONTH
01/10/12                       01/10/12
01/11/12                       01/11/12
01/12/12                       01/01/13
10/10/2012                     01/11/12    But when I try to remove the duplicate period (of the first month) out by restrict rownum, it do not return any rows for the second select at all. The result I get is:
START_DATE                     NEXT_MONTH
10/10/2012                     01/11/12    Can anyone advise what wrong with the select statement ?
Thanks a lot in advance,
Ann

Hi,
Here's one way:
WITH   params      AS
     SELECT     TO_DATE (:p50_start_date, 'DD/MM/YYYY')     AS start_date
     ,     TO_DATE (:p50_end_month, 'DD/MM/YYYY')     AS end_date
     FROM     dual
SELECT     GREATEST ( start_date
           , ADD_MONTHS ( TRUNC (start_date, 'MONTH')
                        , LEVEL - 1
          )               AS month_start
,     LEAST     ( end_date
          , ADD_MONTHS ( TRUNC (start_date, 'MONTH')
                      , LEVEL
                    ) - 1
          )               AS month_end
FROM    params
CONNECT BY     LEVEL     <= 1 + MONTHS_BETWEEN ( end_date
                                  , TRUNC (start_date, 'MONTH')
;:p50_end_month doesn't have to be the last day of the month; any day will work.
If you want to generate a Counter Table containing the integers 1 througn x in SQL, you could say
SELECT ROWNUM AS n
FROM    all_objects
WHERE   ROWNUM <= x
;but, starting in Oracle 9.1, it's much faster to say
SELECT LEVEL   AS n
FROM    dual    -- or any table containing exactly 1 row
CONNECT BY LEVEL <= x
;Also, x can be greater than the number of rows in all_objects.

Need help with conversion progrma for MTS video files. Can't download videos from Sony TX-10 camera

Have new macbook pro 13". Can't download videos from our Sony TX-10 camera. I understand I need some kind of conversion program for MTS video files. Need recommendation for a good conversion program to convert the video files.
Thanks, chieftd

Well, sigh, that's not going to work.
I love how I can do months of research to choose the best camera for my needs and budget, which is NO easy task these days, but surprisingly find it on the unsupported list when it's a very popular camera. So, while it seems to support a whole bunch of other AVCHD options from Sony, not the NEX cameras.
The NEX cameras are the latest generation of mirrorless cameras (which, ironically, are great b/c they give dSLR quality still images while actually producing HD video that always records silently and stays in focus b/c it's mirrorless). The NEX 7 was just reviewed as Camera of the Year.
Bleh. Oh well. Maybe someday.
And, for anyone reading, Roxio Toast Titanium did convert it just fine but it took about 20 min or my time to set up a handful of clips and then a couple hours to complete converting them for the quality I was looking for. One was about 10 minutes of a kids' performance on Christmas and it took a long time. It's just not feasible given how many video clips I do with the camera a week - well, feasible when you consider all the cameras where this would be seamless.
Thanks for posting your reply - I appreciate it.

Need help with Adobe Reader App on ipad

Hi, I downloaded the adobe reader app on my ipad recently and saved lots of documents in it under the “Document” tab. I do my backup on iTune regularly. But I am unsure if all my documents in that app will be backup in my iTune. What worries me is that next time when I buy a new ipad, I cannot transfer the documents over. Any help? Or do I have to painstakingly upload them to Acrobat.com? Is that a storage limit for Acrobat.com? Thank you!

Hi Sophieberry,
You can back up your all document via iTunes. Tethered your device with your Desktop/Mac and open up iTunes. Select your device from the left hand window, and go to the apps screen , scroll down to the bottom of the screen, and then select Adobe Reader from the list.Now select all the document and tap on Save to option and enter the location where you want to save the PDF. Hope this will solve your problem of back up.
However, you can back up your file to Acrobat.com and storage limit for this is 2GB.
Thanks
-Satyadev

Need help with Adobe Reader XI

I am using Windows 7, IE10, and Adobe reader XI. I can not currently open and view bank card statements, but can view all other statements on the same sight. It has to be one of my settings because when opened on my Ipad everything works fine. Can anyone help?

According to Microsoft:
Here are a few methods you can try out.
Method 1: Disable Add-Ons
c) Click the ‘Tools’ button, and then click ‘Manage add-ons’.
d) Disable the add-ons by clicking them one at a time to highlight them and then click on disable button.
e) Re-enable the add-ons one by one and check with which Add-on you get this error message.
f) Disable the Add-on causing the problem.
Method 2: Reset security settings for Internet Explorer
If you configure security settings to be too restrictive, you may prevent Internet Explorer from displaying certain Web sites. To determine whether an issue is caused by overly restrictive security settings, revert to default security settings. To do this, follow these steps:
a.     Open Internet Explorer.
b.     Click Tools, and then click Internet Options.
c.      Click the Security tab.
d.     Click Reset all zones to default level, and then click OK.
Method 3: Run the Internet explorer performance troubleshooter and check if it helps.
a)    Press the ‘Windows + W’ key on the keyboard.
b)    Type troubleshooter in the search box and then press enter.
c)    Select Troubleshooting. Click on view all and select Internet explorer performance.
d)   Click next and follow the on-screen instructions.
Method 4: Reset Internet Explorer 10.
a) Drag the mouse to the bottom right corner and click on search.
b) Click on ‘Settings’ and type ‘Internet Options’.
c) Click on Internet Options and click on ‘Advanced tab’
d) Click ‘Reset’ and click ‘OK’.
Note: Please note that running Reset Internet Explorer Settings will reset all user-defined settings including those set by installed extensions, toolbars and other add-ons to IE Defaults. This includes all Security, Privacy and Zone settings. Also this will clear browsing history, delete all temporary Internet Files, cookies, form data and especially all stored passwords.
Method 5: uninstall the Adobe Acrobat Reader and install the latest version.
Follow the link below to download the latest version:
http://get.adobe.com/reader/otherversions/
Also, if you have multiple Adobe Readers installed, uninstall them all then install the latest version.
Adobe doesn't support multiple versions of Reader or Acrobat on the same computer. Multiple versions simultaneously installed can lead to software conflicts and errors. Uninstall all versions of Reader or Acrobat and then reinstall only one version of the product.

I need help with Adobe Reader X......

I'm not sure what is going on, but for a while now (seems like the last two updates to Reader) my Adobe Reader is acting nuts......!!
First of all, I can not seem to get it to work. When I pull up a .pdf file, I can see the file but then when I try to scroll through the various pages I then get an error message that states something about a memory not being able to be read.
Second of all, if and when I can get a file to eventually stay up on the screen, I can not print it. I get another error message stating the there are no pages selected. What.......? This doesn't make sense. Oh, and I tried the "click on advanced and the image thing." Nothing.
What's up with Adobe? Do they realize that hundreds of thousands of us are having troubles out here? Do they really want this product to be downloaded on people's computers? The new version of Reader doesn't work and is crap.........
I couldn't even see and print my Federal Income Tax Return this year because Reader wouldn't let me.
I would add images, but when I attempt to do so I get an error message stating that "an unexpected error has occurred." Do you think?
I tried the "repair" function off of the 'help' button and the control panel as suggested in the webpage, NOTHING....... So many governments, companies, and entities using pdf files for their communications and an idividual can not open them, print them, read them, or use them. What's wrong with this picture?
Is there anyone out there that can help me get my Reader to work? Am I the only one having troubles? Please HELP......!!

Moved to Adobe Reader.
You cannot able to open pdf files on your computer or you cannot open pdf files in your webbrowser? If you cannot open pdfs in your browser, what browser are you using?

Need help with EXS24 "read velocity range from file name"

Similar Messages

Maybe you are looking for