Need help with Flex, BlazeDS and Spring

I have a configured Flex-Blaze-Spring application. I can call
a remote method on a Spring bean and pipe its results, (list of
pojos), to a DataGrid and the grid displays the data. The remote
object is defined with a <mx:> tag, defining a handler
function that pipes the result as ArrayCollection to the DataGrid's
data provider. I now want to perform another call to the remote
Spring bean, but this time define the remote object in
ActionScript, and pipe the results to a ArrayCollection variable
that I can then iterator thru and pick off values from attributes
of the objects in the ArrayCollection. I can't set access, my
collection seems to be empty. Here is some code:
public var gameRO:RemoteObject;
public var weeksGameList:ArrayCollection;
public function makePickGrid():void {
pickPanel.removeAllChildren();
var pickGrid:Grid = new Grid();
var gRow:GridRow = new GridRow();
var gItem:GridItem = new GridItem();
var cb:CheckBox;
gameRO = new RemoteObject();
gameRO.destination = "gameService";
gameRO.getWeeksGames.addEventListener( ResultEvent.RESULT,
getWeeksGamesResultHandler );
gameRO.addEventListener( FaultEvent.FAULT, handleFault );
gameRO.getWeeksGames( curWeek.selectedItem );
for each (var game:Object in weeksGameList) {
cb = new CheckBox();
cb.label = game.awayTeam;
gItem.addChild( cb );
gRow.addChild( gItem );
pickGrid.addChild( gRow );
pickPanel.addChild( pickGrid );
public function
getWeeksGamesResultHandler(event:ResultEvent):void {
weeksGameList = event.result as ArrayCollection;
What am I missing here? Thanks for any help!!
mik

Hello
This is a bit of a wild guess, but looking at the code, is it possibly related to the scope of cb?
Why not declare it inside the for loop, rather than outside it?

Similar Messages

  • Need help with Blog, Wiki and Gallery

    Hi Team,
    Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
    Please help.
    Thanks,
    Santosh Singh
    Santosh Singh

    Hello Santhosh,
    Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
    http://social.technet.microsoft.com/wiki/
    http://gallery.technet.microsoft.com/

  • Need help with Airport Express and so on.

    Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
    My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

    DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
    The AirPort Extreme base station (AEBS) is a router so it will do what you need.
    You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

  • Need help with Page Layout and Background Scaling

    hello, everyone.
    I am in the process of designing a new website for myself,
    and while I was researching nicely designed pages to use as
    inspiration, I stumbled upon this site:
    http://www.jeffsarmiento.com/
    obviously, the design is very impressive, but it also
    incorporates a lot of web mechanics that I have been trying to
    figure out, so I will use this page as an example.
    one thing I need help with is backgrounds. as you can see in
    the posted website, the creator used a seamlessly tiled paper
    texture to display the bulk of his content on. also make not of the
    pattern that is located to the left of the paper texture. how do I
    create seamless backgrounds like this that will scale to fit any
    amount of content or any resolution? I can't imagine that the guy
    that made that site created a new size background every time he
    made an update, so there has to be an easier way.
    the second thing that I am having trouble with is general
    site layout. I have read that most sites used series of invisible
    tables to organize there content, but when I open the source of
    this page in dreamweaver, he was using something different. div
    tags? should I be using these? who do I use them? are there any
    general layout tips that someone could pass on to me? perhaps a
    link to a good tutorial?
    please help me. i am very confused.
    thanks so much.

    IMO not a good site to emulate. To wit:
    Top background image:
    http://www.jeffsarmiento.com/images/bg-top.jpg;
    745px
    x 350px 137K
    Main background image:
    http://www.jeffsarmiento.com/images/bg-tile.jpg;
    745px x 950px 130K
    Total page size: 454K (Check here:
    www.websiteoptimization.com)
    Website usability experts routinely recommend a maximum page
    size of ~80K
    Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
    they suggest,
    "You speak about yourself approximately 0,003 times as often
    as you speak
    about your customers. Might that have an impact on your
    effectiveness?"
    That is 100% consistent with the #1 Web Design mistake:
    "Believing people
    care about you and your web site." or to phrase more
    expansively, "Our site
    tries to tell you how wonderful we are as a company, but not
    how we're going
    to solve your problems."
    www.sitepoint.com has some excellent books on making a
    website actually
    attractive and usable at the same time.
    Walt
    "beWILLdered_" <[email protected]> wrote in
    message
    news:[email protected]
    > hello, everyone.
    > I am in the process of designing a new website for
    myself, and while I was
    > researching nicely designed pages to use as inspiration,
    I stumbled upon
    > this
    > site:
    >
    http://www.jeffsarmiento.com/
    > obviously, the design is very impressive, but it also
    incorporates a lot
    > of
    > web mechanics that I have been trying to figure out, so
    I will use this
    > page as
    > an example.
    > one thing I need help with is backgrounds. as you can
    see in the posted
    > website, the creator used a seamlessly tiled paper
    texture to display the
    > bulk
    > of his content on. also make not of the pattern that is
    located to the
    > left of
    > the paper texture. how do I create seamless backgrounds
    like this that
    > will
    > scale to fit any amount of content or any resolution? I
    can't imagine that
    > the
    > guy that made that site created a new size background
    every time he made
    > an
    > update, so there has to be an easier way.
    > the second thing that I am having trouble with is
    general site layout. I
    > have
    > read that most sites used series of invisible tables to
    organize there
    > content,
    > but when I open the source of this page in dreamweaver,
    he was using
    > something
    > different. div tags? should I be using these? who do I
    use them? are there
    > any
    > general layout tips that someone could pass on to me?
    perhaps a link to a
    > good
    > tutorial?
    > please help me. i am very confused.
    >
    > thanks so much.
    >

  • Need help with saving data and keeping table history for one BP

    Hi all
    I need help with this one ,
    Scenario:
    When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
    So i need to know how to have SBO fullfil this requirement ?
    Hope it's clear .
    Thanks
    Bongani

    Hi
    I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
    I'm using South African localization.
    Thanks

  • Need help with show/hide and layers moving

    I'm more of a designer, so I don't know code or CSS well at
    all. I'm doing an online portfolio for a class and need help with
    layers not staying in place in different browsers. The portfolio is
    created with a table, but I wanted to use the show/hide function
    for thumbnails of work. Are layers the only way you can use this
    function? I read layers don't work well with tables, so how else
    can I make it so when you mouse over a thumbnail, the larger image
    appears in another cell?

    > I don't know code or CSS well at all.
    That's unfortunate.
    > layers not staying in place in different browsers.
    Layers don't move. But the rest of your page does.
    Before you get too wrapped up in layers, though, please read
    this -
    http://www.great-web-sights.com/g_layerlaws.asp
    They are not good when be used as a primary layout method.
    > I read layers don't work well with tables
    They work fine with tables - but you have to understand both
    tables and
    layers to use them.
    Why not show us your page, so we can see what you are
    struggling with?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Bobbi67" <[email protected]> wrote in
    message
    news:ertd9h$h3m$[email protected]..
    > I'm more of a designer, so I don't know code or CSS well
    at all. I'm doing
    > an
    > online portfolio for a class and need help with layers
    not staying in
    > place in
    > different browsers. The portfolio is created with a
    table, but I wanted to
    > use
    > the show/hide function for thumbnails of work. Are
    layers the only way you
    > can
    > use this function? I read layers don't work well with
    tables, so how else
    > can I
    > make it so when you mouse over a thumbnail, the larger
    image appears in
    > another
    > cell?
    >

  • Newbie needs help with Flex app

    Hi there. I am very new to Flex and also fairly new to
    programming although I do have a little experience.
    I am trying to create an app which stores code snippets or
    common text I tend to use every day in my documents and emails.
    So basically I need help on a design level. I can refer to
    the developer's manual for exact instructions for commands, but I
    need to know what to code first.
    The app will consist of:
    -a tree directory structure where I can create groups.
    -There will be a basic text editor where I input all my data,
    basic text formatting options (font, bullets etc) would be a bonus.
    -A search function
    -Finally it will ideally allow multiple client apps write to
    a central database file over a network
    Can anyone suggest how I should approach such a project?
    Or are there any tutorials / source files which demonstrate
    each bullet point?
    thanks.

    Hey jono,
    I'm new too. But I think I might know the right components.
    If you google any of these + flex 3 you should get some
    decent documentation
    tree - advanced dataGrid component
    basic text editor - rich text editor component
    search function - well, you're gonna need to read up on
    arrays, and arraycollection. Once you get that stuff working, you
    can write up a function to search for a string in an array.
    network functionality - HTTPService, you can dump the
    datagrid into a database, and have it load the database when you
    open up the application.
    Give these things a shot, tutorials / sources will come with
    the google searches.

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • FCP Novice needs help with video quality and FCP 5!!

    Hi,
    I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
    I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
    I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
    The final footaage looks like an old VHS recording that's a year or two old!
    Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
    Is there some presets I should be working to?
    I'm tearing my hair out! Help!

    Hi Guys,
    thanx for your replies.
    here's the latest:
    Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
    When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
    Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
    I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
    Does this make sense to you guys or am I still doing something very wrong?
    Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
    Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
    any more help guys would be greatfully appreciated.

  • Need help with Apps misbehaving and upgrading the MacOS: The all-in-one post. ;)

    Hi there,
    So, I've been browsing the SL and Mavericks forums for the last days but although I have fetched some useful tips and answers, still need some help. Let me put it diary-style so I can be more concise ;)
    Here's my current system profile:
    iMac 27" (aluminium back- if I'm no wrong, from around late 2009-mid 2010)
    MacOS 10.6.1 Never updated.
    3.06 Ghz Intel Core2 Duo
    4Gb RAM
    LaCie Big Disk via FireWire 800
    Internet access via Ethernet port (cable)
    And here's The Issues Log:
    – Day one: First ever Kernel Panic. Restart. Nothing (apparently) wrong.
    – 3 weeks elapsed: Second Kernel Panic. Same. iMac restarts fine. Apps fine. No missing files. No misbehaviour experiences.
    – After a month or so: One morning, Skype decides on its own to stop launching. The night before, I chatted with one of my clients, fine as always, but at the next day, nothing. Computer is usually shut off for the night. And so it was that night. Updated Skype and also did all the guest account trick / repaired permissions / repair ACLs. Nothing worked. Overwrote the Skype app with a former functioning version I have in an MacOS 10.5 system. Didn't work. Now I have to chat on the MacOS 10.5 computer. No good.
    – 15 days ago or so: After realising that I no longer have my HP1515n printer (it ran out of inks and thrashed it. It costs more to refill than to buy a new one), I deleted the printer from the printers list in the System Prefs Pane.
    – Last week: Acrobat (CS4) won't launch a PDF file and freezes. Spinning beach ball. Force quit and try opening the PDF file again. Freezes again. And again. And again. With that file and every other PDF.
    Photoshop CS5 fails to open or crashes when attempting to open any jpg or tiff file. InDesign and Illustrator CS5 are frozen and had to force quit both. MacOS 10.5
    Restart the iMac thinking it is just a "common" bad day and hoping everything will be alright after the restart, but nope.
    Not only the CS5 stops working; MSOffice stops working too. Spinning beach ball. Begin to suspect of the deletion of the printer, however, I also deleted the same printer in the above mentioned 10.5 system and I'm not experiencing anything strange. Reinstalled the HP drivers but nothing remarkable happens.
    Then, try to uninstall CS5, CS4, Office, etc. Try to reinstall Acrobat CS4 and the CS5 apps. Reinstall Office. Nothing. Just Outlook works.
    Since I had to desperately meet deadlines, convinced a colleague to come over to the studio and -I know, I know- allowed me to install a copy of CS6. It seems to work fine, except for Acrobat, which randomly freezes/hangs/works and Photoshop, which works fine unless you want to open a layered file containing text layers or if you want to type text on a normal file, because it freezes as soon as the Text Tool is pressed in the toolbar, of course, spinning beach ball again.
    Well, Illustrator CS6 sometimes shows a strange black thin frame overlaid on the interface but goes away by switching to another workspace and then back to the current. InDesign CS6 seems to be fine and making PDFs as expected. However, as I said before, it is pure luck if Acrobat accepts to open the file or even if it launches. Spinning beach ball when freezing/hanging.  
    As a method for eliminating possible culprits, did a clean up of the Suitcase Fusion database, removed duplicate and a few (less than 10) corrupted fonts.
    Removed completely MSOffice reinstalled and updated. Nothing. Now I neither have MSoffice running.
    I am no rookie but I can't even imagine what can cause such amount of misbehaviour, (kernel panics have something to do? malware? lack of system updates? MacHD is damaged?) so I'm thinking of a few scenarios:
    Backing up my projects and user folder –anything else to backup? (In fact I've already done that)– and:
    1. Do a clean install. Not sure if it will be best to completely erase the whole drive or if a standard reinstallation will be enough.
    2. Take the machine to a Genius Bar to see if there's anything that can be done without major OS messes.
    3. Erase the drive and go through the Mavericks upgrading (SL to Ln to MLn to Mavcks), although not sure if this upgrade is worth yet.
    4. Replace HD for a brand new one and either step 1 or 3.
    5. As a complement, I'm thinking of adding more RAM.
    Well. It is really the first time I don't know what to do. I have work to do and would not want to face a week away from my main computer and since most of the files are CS5-6 and hence, can't move to my wife's iMac...
    Apologies if this post feels too long, but I will truly appreciate any kind of input and advice on one of more of the issues mentioned in this post.
    And if it fits best in any other forum, please also let me know.
    Cheers and thanks in advantage.

    You have to use the Base Station Menu on the Menu Bar at the very top of your screen.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Need help with load balancing and DNS proxy

    Hi,
    I need help on how to configure my router so it will work with my DNS proxy and load balancing.
    I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
    The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
    In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
    DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-0.0.0.0)WAN2
    Any help or suggestions are appreciated.
    Alex

    Good solution though. That's probably the only way you could do true Load Balancing anyway.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Need help with load balancing and DNS proxy -Repost

    Hi,
    I need help on how to configure my router so it will work with my DNS proxy and load balancing.
    I have a Linksys LRT224 router. I have two broadband connections from two separate ISPs,500Mbps each (WAN1 & WAN2). WAN1 has a static IP and WAN2 is dynamic assigned. I use Unlocator (www.unlocator.com) so I can access geographically restricted sites (Pandora, Netflix, etc.).
    The problem I have is that unlocator registers only one IP address (WAN1 address) and since I am doing load balancing I have no way of knowing if the DNS request will go through the registered IP (WAN1) or through the other (WAN2). I am not an expert in routing or networking but I'm guessing I have a way of configuring the router so all the DNS requests go out through WAN1, right?
    In the router's Dual WAN config page there is a section for Protocol Binding. I tried to configure but only managed to screw up the internet at home. I used:
    DNS[UDP/53-53]->192.168.1.1-192.168.1.254(0.0.0.0-​0.0.0.0)WAN2
    Any help or suggestions are appreciated.
    Alex

    Good solution though. That's probably the only way you could do true Load Balancing anyway.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Help with Flex - PHP - and SQL Server

    Good afternoon,
    I have been working on this problem for over a week and am at
    my wit's end. I am trying to create an application that will allow
    me and my fellow statisticians to share code easily. The
    technologies at my disposal are Flex, PHP and SQL Server 2005. The
    web server is IIS. I have downloaded and installed the PHP driver
    for SQL Server 2005 and am able to query the database and generate
    XML. The problem I'm having is that I can't return the XML from PHP
    to Flex.
    If I execute the php code in a web browser and view the
    source, it looks like XML. I can then cut and paste the exact same
    code into an xml file and read it in from the harddisk and the tree
    will populate. Can anyone please help me? I don't have flex builder
    so I it's hard for me to use trace and view what is going on.
    Thanks in advance,
    Eric Graves

    Thanks for the suggestion. I have tried every permutation of
    e4x path notation I can think of. You're right, you're not supposed
    to need the root level as that's supposed to be returned in the
    result. So you should only need to reference first level after the
    root. When I do this and launch the .SWF I get a completely empty
    tree.
    I think the problem lies somewhere in my understanding of
    what format Flex needs returned from a HTTPRequest. It's my
    understanding that it just needs to be XML. As far as I can tell,
    that's what I'm sending it. On the PHP side, does it have to be
    cast a special way? Everything I've seen just shows people using
    ECHO to output the XML data.

  • Deperately need help with my iPod and Pioneer Car Stereo

    I just bought Pioneer's newest deck from Best Buy. The Model number of the deck is DEH-P6800MP. It has a mini jack (2.5 mm stereo jack) on the front of the deck that you can plug your iPod into. I purchased the little adaptor that allows me to just plug the iPod in using the Headphone Jack. It works great. I can use my click wheel to navigate the menus and the sound is awesome...except for one thing, it only plays through the right side speakers. I thought maybe the Fader needed to be adjusted on the deck but everything is dead center. I thought maybe something was wrong with the deck but the Tuner and CD player both work perfectly. I even tried using different cables with no success. When I called Best Buy they told me they were familiar with the problem and to download the newest software for my iPod and it should fix it. It didn't! I am so frustrated by this. I paid alot of money for this deck thinking I wouldn't have to buy any additional interfaces and would never have to deal with an FM transmitter again. Can anybody help?
    Fifth Generation 60 Gig iPod   Windows XP  

    After plugging my walkman in and experiencing the same problem, I figured it must be the adaptor. I went to the local Radio Shack and picked up a mini-jack adaptor that was indeed Stereo. Thankfully it worked!!! I can't tell you how happy my family and I are to have all our music available in the family vehicle. Thanks for your help and @#$% Best Buy for selling me not one but two car stereos under the false pretense that I wouldn't need anything else to hook-up my iPod and then not having any idea how to help me when I needed it.
      Windows XP  

  • Need help with flex 3

    Hi all,
    I'm a newb to Flex 3 and i found it really exciting and helpful.
    However i'm facing a problem here. Apparently my Flex doesn't have some of the packages and classes. The two that i have tried and didn't work are: file.filesystem (i try to read/write on file, so i declare "var file:File as  ..." and i won't let me do it) and mx:HttpService.
    I have no idea how to install those packages and make them work so if anyone can show me the way, i would really really appreciate that.
    Thanks a lot and have a great weekend
    QP

    Update:
    I just found out the solution for mx:HttpService:
    "The HTTPService needs to be outside of the Canvas and State tags." (http://codingforums.com/showthread.php?p=831082)
    Still i haven't figure out the other problem.
    Thanks

Maybe you are looking for

  • Looking for a todo app that puts new todos at the top of the list

    I've been using Appigo's ToDo for several years now. It's elegant, fast, intuitive, and feature packed. One of the best things it has is the ability to drag todos around manually and their due dates change. There is one thing, however, that I wish it

  • TS3276 . How to set a default email client

    I can't find a way to establish a default email client (I have 4) for Mail just upgraded to Mountain Lion. All help appreciated. George

  • Get mail message count

    I have set up Mail with my GMail account and am trying to pull down messages. Every time I click "Get Mail", it only pulls down about 8-12 messages. Is there a way to say "Get ALL Mail" instead of having to hit this button repeatedly? If not, is ther

  • Error in LogViewer.....

    <h5> Hi guys! <h5> I'm having error when I try to enter to LogViewer in the Visual Administrator: "unable to obtain a valid configuration.Please check the detail of the exception" clicking in the details: <h6> <h6> com.sapmarkets.bam.util.BAMRuntimeE

  • Saving/exporting issue in Windows 7-file name changes when trying to navigate

    I just got Windows 7 on my computer and am running ID CS5. The weirdest problem happens when I try to save as or export a file. The dialog box comes up and normally, I would be able to select a folder I want to navigate to just by typing the folder n


HashFlare