Need help with formatting a software RAID 5 array with xfs
Hi,
i'm tying to format a software RAID 5 array, using the xfs filesystem with the following command:
# mkfs.xfs -v -m 0.5 -b 4096 -E stride=64,stripe-width=128 /dev/md0
but all I get is the attached error message. It works fine when I use the ext4 filesystem. Any ideas?
Thanks!
http://i.imgur.com/cooLBwH.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Sorry I numbered them to show the flow of information, this was also just a place for me to store info as I worked through it. I managed to get it to work by creating a partition that takes up the whole drive and is actually 22 GB larger than all the other drives (since I found out that the had root, swap and home partitions that are no longer needed).
I should be able to resize the other partitions without a problem, correct? They're EXT4. Should I unmount the raid array and do them individually, remount the array, let it sync and do the next? Or just unmount the array, resize all of them, mount it and let it sync?
Similar Messages
-
Really need help on formatting a drive to use with time machine.
I have a 250GB EXT. Hard drive, I would like to use 200GB for time machine and the remaining 50Gb I woul like to leave free and if possible have that 50GB partition compatible with windows since I might need to copy stuff to my wires windows 7 machine. Is this possible Im not very good at partioning.
Right now the Hdd has all my pics and music from my old PC that I will be transferring over to the new MacBook pro. Please help. ThanksTM can backup only to one drive. That backup drive should be at least twice the capacity of the drive that you backup. If your internal HDD is 320 GBs, then the TM backup drive should be at least 640 GBs or TM will run out of space.
If you can't provide that and can only allocate 320 GBs to a backup, then don't use TM. Consider using backup software that clones your internal HDD then incrementally updates the clone using scheduled backup times. Some suitable software are:
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup -
Hi I need Help for Formating HD so Wat Key need hold on start up for format HD I apprciated you Help
Jesus:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• _Where available_ +Click on Options button+
+• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)+
+• Click OK+
• Select number of partitions in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius -
Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?
Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exceptionDo you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/ -
Need help in formatting the Date - Date does not
Need help in formatting the Date - Date does not formats and give Not a valid month error in the below scenario.
select oc.ST_PGM_MGR, r.ag_dnum, get_major_work_type(r.perf_eval_rtng_id) "v_work_code", r.ag_dnum_supp "supp", r.intfinal, to_char(r.formdate,'MM/DD/YYYY') "formdate", to_char(r.servfrom,'MM/DD/YYYY') "srv_from", to_char(r.servto,'MM/DD/YYYY') "srv_to", descript, add_months(to_char
--- Bellow line of Code on trying to format it to mm/dd/yyyy gives the error
(r.formdate, 'DD-MON-YYYY'),12) "formdate2"
from table REdited by: Lucy Discover on Jul 7, 2011 11:34 AM
Edited by: Lucy Discover on Jul 7, 2011 1:05 PMYour syntax is wrong - look at the post above where this syntax is given:
to_char (add_months(r.formdate,12), 'MM/DD/YYYY') "formdate2"Look at the formula from a logical perspective - "inside out" to read what is happening -
take formdate, add 12 months
add_months(r.formdate, 12)then apply the to_char format mask - basic syntax
to_char(date, 'MM/DD/YYYY')Compare to your syntax:
to_char(add_months(r.formdate, 'MM/DD/YYYY'),12) "formdate2"You will see your format string inside the call to add_months, and your 12 inside the call to to_char.
Good luck! -
In installation process of Acrobat Professional 7 , its showing that Adobe Pdf printer is not Installed...need help to install the software completely
If it is Win 7 or later, the Adobe PDF printer for AA 7 will not install and AcroTray will not function. You will have to install a PS driver from Adobe or maybe an HP color PS printer driver. Then edit the driver properties and change the name to Adobe PDF and the port to FILE. You will always have to do an extra step in creating PDFs by opening the file that is created in Distiller to get the PDF.
If you are talking about Win 8, you may not be successful at all. If you got Acrobat and Distiller to install, then there is a chance. -
I need help in getting my software options in CS5 Photoshop Student version. We have registered the product but don't have print preview or Adjust Auto Levels for example?
<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>
-
Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?
Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. The program installed ok and the S/N took.
The program does record video and audio HDV M2T.
The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p. 4:3....
The scopes respond as do the audio components when recording. (with a blank monitor component).
The video does play back on my system no problem.
Any ideas?
DanMoving the discussion to OnLocation
Thanks,
Atul Saini -
Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!
If you've had it for less than a year, then it's still under warranty. Take it to an Apple store or an authorized service facility. See http://support.apple.com/kb/HT1434
-
Need help to log off iTunes - the tab with the current Apple-iD is "greyed" out.
Need help to log off iTunes -> the tab with the current Apple-iD is "greyed" out. Can anyone help me?
Do you have Restrictions turned on?
-
I need help activating my iphone 4 cdma phone with straight talk please
i need help activating my iphone 4 cdma phone with straight talk please .. i have the starter kit just need help activating it please
Settings > General > About.
-> iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible
Ok guys I am new to the iphone 4s. I just dumped my Blackberry after 10 years. I need help integrating Microsoft Office, Outlook and Calendar with my job and is it possible? Also I need it to automatically push email and appointments to my phone? I will buy any app just need to know which is best for work environment. Here is what I am thinking about doing. http://www.groovypost.com/howto/apple/sync-iphone-or-ipod-touch-calendar-and-con tacts-with-google/ Is this the best way? For personal use I am using paid G whiz app
I use Google Calendar Sync to sync my work Outlook calendar to a gmail account, then sync that to my iPhone. It works well for me for the past couple of years.
As far as mail itself, just ask your it folks for settings for remote access to your exchange account, and then set it up on the phone.
As far as working with Office docs, to be able to actually edit them and such, look in the app store for DocsToGo or QuickOffice - they both are good but each has it's pros and cons, so on balance it's down to mere preference i think. -
New Builder needs some info K9A Plat. RAID Array help
This is a new build AMD 64x2 6000+, K9A platinum, Lite On DVD Re Writeable SATA, 2x74Gig WD Raptors in Raid 0, Asus X1950 pro Thermaltake 700 W PSU Crossfire cert.
BIOS registered my drives, Built array PC Rebooted, Installing Win XP pro Hit F6 install drivers, Format drives, Then before Install It says that :setup cannot copy the file ahcix86.inf.
If I skip it, it will install XP but when I try to boot from the hard drive It starts to load XP but crashes to the blue screen of death
*** Stop: 0x0000007BC ( 0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)
Has anyone got this error string?
First RAID array I would very much appreciate any help given.Hi!
Looking at some info on Google and Microsoft site, I cannot find the BC error code, only the error code ending with B. It indicates an error with the boot device. It can be caused by several things.
Check that you are using the correct device drivers to install Windows
Also, check the installation CD. It could be that the disk was damaged and that you are missing a crucial file because of that
You can also try installing Windows again and choose to recover the previous installation.
If this all does not help, try installing Windows on a single HDD (no raid) to see if that will work. -
Need help in formating a form dealing with negative currency
Need Help!!!
Creating forms in Adobe acrobat Pro I could format a number cell to calculate additions/subtractions of currency. If the result was negative I could get the cell to show the negative result in red text and show parentheses around them. How can I do that in LiveCycle?
If i have to use formcalc - what would i type in?In LiveCycle can be done using the Numeric Field object and some formcalc script.
Use the "Numeric Field" from the Object Library. For the Field patterns (Select the placed numeric field, On object Window Object -> Field) use "num.currency{}" to show the currency(Ex: $) and "parentheses" if its negative. Write some script to show red text/border in red .
On exit event of the Numeric Field here is the script:
if($.rawValue <0) then $.font.fill.color.value = "255,0,0" endif // This will make entire text in red color if the value is negative.
if($.rawValue <0) then $.validate.nullTest = "error" endif //This will make border of the field in red color if the value is negative.
Hope this helps. -
Recently I've had some malware problems with my PC, and to deal with it I've decided that I am going to format.
I turn on my PC, and press F8 for advanced boot options.
Select Repair my PC.
It loads a bit, then I encounter a problem on startup I get to the logon screen and all it shows is "other user" with the username/pass fields blank.
this is my personal computer and has only one user account. Mine, which is the administrator.
The problem is, that when I enter the information for this account, which is the only one on my PC, It says that it is not recognized or cannot be contacted.
If anyone has experienced similar problems, or if this is NOT referring to a user account but something else instead, I would greatly appreciate some help from you. Thanks!I used the function key (if the key is f8) but when it get to "repair my pc" then it goes to "Other User" log on page and no password/user name I have ever used will work. I need a way to start up recovery without using the f8 or the installation cd's (which
I Don't have). I do Thank You for your reply.
Maybe you are looking for
-
10.5.2 Virtual Domains - 2 user questions
(NOTE: Generic host and domain names used in this mail, real ones are used for the actual machine) Clean 10.5.1 install, immediately hit software update multiple times till 10.5.2 and any other offered updates were installed. Went into WGM and create
-
Java 2D array program help please?
Hi - I'm teaching computer science to myself (java, using jGRASP) using some websites online, and one of the activities I have to do is to make an "image smoother" program. I just started learning about 2D array, and I think I get what it is (based o
-
Final Cut Pro Indicator Bar Settings
Hey all, i'm wondering if there is a way to change the indicator bar in final cut pro to not play video or audio when i move it. when i move it around it lags something terrible and is driving me nuts. or maybe my laptop needs to get some of its sett
-
Hi all, Our client preparing Balance sheet in SAP ECC 5.0. Here go-live date is from 01.04.2006. Till now they didnot run the depreciation for last year. Now they are reconciling before dep.run. Can any one tell me what areas I have to check as a Con
-
The syncing was perfectly in time with the rest of the song. I just came back to start working on it again, and it's completely off beat. What gives? Also, I'd forgotten about this problem until just now, when I extend a loop (for instance, to play 2