Need help with mobily slider CSS
Hi there, I have found a really nice slider which you can see a demo here:
http://playground.mobily.pl/jquery/mobily-slider/demo.html
Basically, I am trying to get the bullets currently underneath the images to sit on top of the image, but whatever I try, I am not achieving what I want. I was wondering if you could give me some advice on where I on how to make it happen... please!
I can get one bullet to move up and sit on top, but then I loose all but the one bullet.
Here is the CSS:
#content {
width:900px;
.slider {
float:left;
width:900px;
height:305px;
position:relative;
padding-bottom:26px;
.sliderContent {
float:left;
width:900px;
height:305px;
clear:both;
position:relative;
overflow:hidden;
.sliderArrows a {
display:block;
text-indent:-9999px;
outline:none;
z-index:50;
background-image:url(../gfx/prev_next.png);
width:42px;
height:42px;
position:absolute;
top:50%;
margin-top:-34px;
.prev {
background-position:0 0;
left:15px;
.prev:hover {
background-position:0 -44px;
.next {
right:15px;
background-position:-44px 0;
.next:hover {
background-position:-44px -44px;
.sliderContent .item {
position:absolute;
width:900px;
height:305px;
background:#fff;
z-index:10;
.sliderBullets {
position:absolute;
bottom:0;
left:50%;
z-index:50;
margin-left:-45px;
.sliderBullets a {
display:block;
float:left;
text-indent:-9999px;
outline:none;
margin-left:5px;
width:10px;
height:11px;
background:url(../gfx/bullets.png) no-repeat;
.sliderBullets .active {
background-position:0 -13px;
.sliderContent a {
outline:none;
a {
color:#fff;
a img {
border:none;
Any guidance you could give is going to be appreciated.
Thanks in advance
Mat
Add padding: 20px 0 0 0; to the css selector below, as shown.
.sliderContent {
padding: 20px 0 0 0;
float:left;
width:800px;
height:350px;
clear:both;
position:relative;
overflow:hidden;
Amend bottom: 0; to top: 0; on the css selector below, as shown:
.sliderBullets {
position:absolute;
top:0;
left:50%;
z-index:50;
margin-left:-45px;
That's it, Job done.
Similar Messages
-
Hi everyone, I am a flash designer new to flex, i know that
Flex is geared more towards coders than designers, but i have a
pretty good grasp on how to work w/ flex and as3. usually if i find
some example i can mold my project after that. anyways here's my
problem: i found a dual slider component by
Brendan
Meutzner and have it working great. what i need is for its
change event to affect a grid of items in an xml file based on
price. i know i need to put these items in an array collection.
however, i found the adobe
FlexStore
and realized i could download the source by right clicking on it.
in the products section there is the code and everything i need to
make my project work (the slide updates visible products based on
their price) but my problem is it only works the first time(if you
move the slider you will see it update the product view but only
from the initial values that wee set). here is a
LINK
to my files (with sourceview enabled) so if anyone can help me out,
it would be much appreciated. feel free to email me,
[email protected]
if you need any more info to help me out. thanks!Thanks NED!
that was it... I got the code below working.
stop();
maskee.cacheAsBitmap = true;
vol_slider.cacheAsBitmap = true;
maskee.mask = vol_slider;
stage.addEventListener(Event.ENTER_FRAME,myFunction);
function myFunction(event:Event) {
vol_switch.x = vol_slider.x;
function startDragHandler(evt:MouseEvent):void {
vol_slider.startDrag(false, new Rectangle(2, 0, 298, 0));
stage.addEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
function stopDragHandler(evt:MouseEvent):void {
vol_slider.stopDrag();
stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
vol_switch.buttonMode = true;
vol_switch.addEventListener(MouseEvent.MOUSE_DOWN, startDragHandler); -
Hi All,
I created a graphic to simulate a volume slider. Its working, but i want a movieclip graphic (vol_switch) to follow the mask. It is only following it after i release the mouse. i cannot figure out how to have it follow on the mouse drag without taking precedence over the mask and disabling that. any suggestions?
I tried the code in bold, but not working.
stop();
maskee.cacheAsBitmap = true;
vol_slider.cacheAsBitmap = true;
maskee.mask = vol_slider;
function startDragHandler(evt:MouseEvent):void
vol_slider.startDrag(false, new Rectangle(2, 0, 298, 0));
stage.addEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
vol_switch.x = vol_slider.x
function stopDragHandler(evt:MouseEvent):void
vol_slider.stopDrag();
vol_switch.x = vol_slider.x
stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
vol_slider.buttonMode = true;
vol_slider.addEventListener(MouseEvent.MOUSE_DOWN, startDragHandler);
thank you in advance!!
- PatThanks NED!
that was it... I got the code below working.
stop();
maskee.cacheAsBitmap = true;
vol_slider.cacheAsBitmap = true;
maskee.mask = vol_slider;
stage.addEventListener(Event.ENTER_FRAME,myFunction);
function myFunction(event:Event) {
vol_switch.x = vol_slider.x;
function startDragHandler(evt:MouseEvent):void {
vol_slider.startDrag(false, new Rectangle(2, 0, 298, 0));
stage.addEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
function stopDragHandler(evt:MouseEvent):void {
vol_slider.stopDrag();
stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragHandler);
vol_switch.buttonMode = true;
vol_switch.addEventListener(MouseEvent.MOUSE_DOWN, startDragHandler); -
Need help with Flash Slide Show
Hello, Flash friends.
I recently put together a Flash photo album for a client of
mine. She wants to be able to upload new images, so I created it
with XML using the following action-script:
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
description = [];
total = xmlNode.childNodes.length;
for (i=0; i<total; i++) {
image
= xmlNode.childNodes.childNodes[0].firstChild.nodeValue;
description
= xmlNode.childNodes.childNodes[1].firstChild.nodeValue;
firstImage();
} else {
content = "file not loaded!";
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("images.xml");
listen = new Object();
listen.onKeyDown = function() {
if (Key.getCode() == Key.LEFT) {
prevImage();
} else if (Key.getCode() == Key.RIGHT) {
nextImage();
Key.addListener(listen);
previous_btn.onRelease = function() {
prevImage();
next_btn.onRelease = function() {
nextImage();
p = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
loaded = picture.getBytesLoaded();
preloader._visible = true;
if (loaded != filesize) {
preloader.preload_bar._xscale = 100*loaded/filesize;
} else {
preloader._visible = false;
if (picture._alpha<100) {
picture._alpha += 10;
function nextImage() {
if (p<(total-1)) {
p++;
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function prevImage() {
if (p>0) {
p--;
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[0], 1);
desc_txt.text = description[0];
picture_num();
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
As you can see, the images can only be viewed by clicking a
"next" or "previous" button.
Well, my client has since decided that she would like to drop
the buttons and have the images automatically change from one to
another while the user sits back and watches. This seems like such
an easy code to add, but I am a novice at this, and I cannot find
any forums or tutorials that give a proper code which I may copy
and paste into this pre-existing code.
Can anyone offer a suggestion?
Thank you!!!!!Here's my quick suggestion:
Add a <link> child element to your <pic> elements
- each <link> would be a sibling of each <image>, like
this:
<pic>
<image>filename.jpg</image>
<link>
http://www.example.com</link>
</pic>
Then, in your loadXML function, add this:
link = []
for(...){
link
= xmlNode.childNodes.childNode[2].firstChild.nodeValue
Finally, in each function where you call picture.loadMovie(),
add a line below it:
picture.onRelease = function(){
getURL(link
Best,
Brian Driscoll
Owner
Driscoll Web Development
http://driscollwebdev.com -
Need help with image slide show using xml
I have a flash document that pulls up images using xml but I
would like for the images to also link to different urls and to be
able to change these links in the XML document. I have included my
code
Also my xml file looks simular to this
<images>
<pic>
<image>images/1.jpg</image>
</pic>
<images>
Please if anyone can help me that would be great. Once again
I would like for these images to be able to link to a url and to
read the url in my XML document.Here's my quick suggestion:
Add a <link> child element to your <pic> elements
- each <link> would be a sibling of each <image>, like
this:
<pic>
<image>filename.jpg</image>
<link>
http://www.example.com</link>
</pic>
Then, in your loadXML function, add this:
link = []
for(...){
link
= xmlNode.childNodes.childNode[2].firstChild.nodeValue
Finally, in each function where you call picture.loadMovie(),
add a line below it:
picture.onRelease = function(){
getURL(link
Best,
Brian Driscoll
Owner
Driscoll Web Development
http://driscollwebdev.com -
Need help with Template - unbalanced #EndEditable tag
I am unable to use this template to create a new page and get the "unbalanced #EndEditable tag" error.
If I open the file independently it looks great - otherwise I get the error.
Code for internal_students.dwt
There is an error at line 45, column 79 (absolute position 2188)
<div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
<p><a href="../Library/contact/index.html">Contact Us</a></p>
<!-- #EndLibraryItem --></div>
<div id="navigation">
<div id="navigation_l">
<div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
<li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
<li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
</ul>
<!-- #EndLibraryItem --></div>
I need help with this as the site and templates were created 2/3 years before I arrived on the job.
Thank you
CherylOkay
- This is on-line page http://caite.cs.umass.edu/students/index.html
If you want code from template here it is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/internal_about.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>CAITE - Commonwealth Alliance for Information Technology Education</title>
<!-- InstanceEndEditable -->
<!-- InstanceBeginEditable name="head" -->
<meta name="Description" content="Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy" />
<meta name="Keywords" content="Commonwealth Alliance for Information Technology Education CAITE Massachusetts women minorities information technology IT" />
<meta name="robots" content="all, index, follow" />
<meta name="revisit-after" content="14 days" />
<meta name="author" content="Outreach Web Team" />
<!-- TemplateBeginEditable name="head" --><!-- TemplateEndEditable --><!-- InstanceEndEditable -->
<link rel="shortcut icon" href="/images/favicon.ico" />
<script type="text/javascript" src="../scripts/jquery.js"></script>
<script type="text/javascript" src="../scripts/jquery.easing.js"></script>
<script type="text/javascript" src="../scripts/jquery.pngfix.js"></script>
<script language="JavaScript" type="text/JavaScript">
<!--
$(document).ready(function() {
$("img[@src$=png], div#wrapper_l, div#wrapper_r, div#whatsnew").pngfix();
//-->
</script>
<link href="../css/screenstyle.css" rel="stylesheet" type="text/css" media="screen" />
<link href="../css/printstyle.css" rel="stylesheet" type="text/css" media="print" />
</head>
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<body>
<div id="wrapper">
<div id="metanav"><!-- #BeginLibraryItem "/Library/metaNav.lbi" -->
<p><a href="../Library/contact/index.html">Contact Us</a></p>
<!-- #EndLibraryItem --></div>
<div id="navigation">
<div id="navigation_l">
<div id="navigation_r"><!-- #BeginLibraryItem "/Library/mainNav.lbi" --> <ul>
<li><a href="../index.html" class="first"><img src="../images/spacer.gif" alt="CAITE Homepage" width="75" height="20" border="0" /></a></li>
<li><a href="../about/index.html">About</a></li>
<li><a href="../news/index.html">News And Events</a></li>
<li><a href="../educators/index.html">For Educators</a></li>
<li><a href="../students/index.html">For Students</a></li>
<li><a href="../industry/index.html" class="last">For Industry</a></li>
</ul>
<!-- #EndLibraryItem --></div>
<!-- end navigation right -->
</div><!-- end navigation left -->
</div><!-- end navigation -->
<div id="wrapper_l">
<div id="wrapper_r">
<div id="innerwrapper">
<div id="internalBanner-print"> <h1>Commonwealth Alliance for Information Technology Education (CAITE)</h1></div>
<div id="internalBanner"><!-- InstanceBeginEditable name="internalBanner" -->
<div class="students-banner">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="125" height="188" align="left" valign="top" id="homeImage"><img src="../images/logo_vertical_small.png" alt="CAITE" width="105" height="188" /></td>
<td align="left" valign="top" id="internal-banner-quote"><div id="internalQuote">
<div id="internalQuote-inner">
<p>CAITE designs and carrys out comprehensive programs that address under-representation in information technology (IT).</p>
</div>
</div></td>
</tr>
</table>
</div>
<!-- InstanceEndEditable --></div> <!-- end banner -->
<div id="internalContent">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="317" align="left" valign="top" id="secondary-content">
<!-- InstanceBeginEditable name="SecondaryNav" --><!-- #BeginLibraryItem "/Library/studentNav.lbi" -->
<h3><a href="../students/index.html">For Students</a></h3>
<div id="secondaryNav">
<ul>
<li><a href="http://www.takeITgoanywhere.org" target="_blank">TakeITgoanywhere.org</a></li>
</ul>
</div><!-- #EndLibraryItem --><!-- InstanceEndEditable -->
</td>
<td align="left" valign="top" id="contentCell"><!-- InstanceBeginEditable name="mainContent" -->
<h1>For Students</h1>
<p>The University of Massachusetts Amherst is leading a Commonwealth Alliance for Information Technology Education (CAITE) to design and carry out comprehensive programs that address under representation in information technology (IT) education and the workforce. CAITE will focus on women and minorities in groups that are underrepresented in the Massachusetts innovation economy; that is, economically, academically, and socially disadvantaged residents.</p>
<p>The project will pilot a series of outreach programs supported by educational pathways in three regions (one rural, one suburban, and one urban). The project will include work with high school teachers, staff, and counselors. CAITE will identify best practices and disseminate, deploy, extend and institutionalize these best practices statewide and nationally.</p>
<p>Community colleges are the centerpiece of CAITE because of the central role they play in reaching out to underserved populations and in serving as a gateway to careers and further higher education.</p>
<p>This project will build a broad alliance built on its leadership in and partnership with the Commonwealth Information Technology Initiative (CITI), the Boston Area Advanced Technological Education Center (BATEC), regional Louis Stokes Alliances and NSF EGEP programs, and other partnerships and initiatives focused on information technology education and STEM pipeline issues</p>
<p> </p>
<!-- InstanceEndEditable --></td>
</tr>
</table>
</div>
<div id="alliances">
<table width="100%" border="0" cellpadding="0" cellspacing="0">
<tr>
<td height="30" align="left" valign="top"><h2><a href="../about/alliances.html">Alliances</a></h2></td>
</tr>
<tr>
<td align="center" valign="middle"><!-- #BeginLibraryItem "/Library/AllianceTable.lbi" --><p>
<table border="0" cellpadding="2" cellspacing="0">
<tr>
<td width="35" align="center" valign="middle"> </td>
<td align="center" valign="middle"><a href="http://www.citi.mass.edu/" target="_blank"><img src="../images/logo_citi.jpg" alt="Citi" width="65" height="50" border="0 /"></a></td>
<td align="center" valign="middle"><a href="http://www.batec.org/index.php" target="_blank"><img src="../images/logo_batec.jpg" alt="BATEC" width="69" height="46" border="0" /></a></td>
<td align="center" valign="middle"><a href="http://www.nsf.gov/index.jsp" target="_blank"><img src="../images/nsflogo.gif" alt="NSF" width="64" height="65" border="0" ></a></td>
<td align="center" valign="middle"><a href="http://www.nelsamp.neu.edu/" target="_blank"><img src="../images/nelsamplogo.gif" width="100" border="0"></a></td>
<td align="center" valign="middle"><p><a href="http://mysite.verizon.net/milnerm/" target="_blank"><img src="../images/umlsamp.png" width="85" height="63" border="0"></a></p> </td>
<td align="center" valign="middle"><a href="http://www.neagep.org/index.asp" target="_blank"><img src="../images/nealogo.gif" border="0" ></a></td>
</tr>
</table>
<!-- #EndLibraryItem --></td>
</tr>
</table>
</div>
</div> <!-- end inner wrapper -->
</div><!-- end wrapper right -->
</div><!-- end wrapper left -->
<div id="bottom">
<div id="bottom_l">
<div id="bottom_r"> </div><!-- end bottom right -->
</div><!-- end bottom left -->
</div> <!-- end bottom -->
</div><!-- end wrapper -->
<div id="copyright"><!-- #BeginLibraryItem "/Library/copyright.lbi" -->
<p>Sponsored by CAITE an NSF CISE Broadening Participation in Computing Alliance<br />
© copyright 2008 <a href="http://www.umass.edu/" target="_blank">University of Massachusetts, Amherst</a></p>
<font color="#666666"><br>
</font>
<p><font color="#666666" size=2> This material is based upon work supported by the National Science Foundation under Grant No.s NSF-0634412 and NSF-0837739. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.</font> </p>
<!-- #EndLibraryItem --></div>
<!-- end copyright -->
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
try {
var pageTracker = _gat._getTracker("UA-7435501-1");
pageTracker._trackPageview();
} catch(err) {}</script>
</body>
<!-- InstanceEnd --></html> -
I need Help with a website I've created
I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">
<!--
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #42413C;
margin: 0;
padding: 0;
color: #000;
background-color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ this fixed width container surrounds all other elements ~~ */
.container {
width: 960px;
background: #FFF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ This is the layout information. ~~
1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
.content {
padding: 10px 0;
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the overflow:hidden on the .container is removed */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
#apDiv1 {
position:absolute;
width:352px;
height:2992px;
z-index:1;
top: 171px;
left: 507px;
#apDiv2 {
position:absolute;
width:961px;
height:1399px;
z-index:1;
left: 187px;
top: 1px;
#apDiv3 {
position:absolute;
width:961px;
height:1001px;
z-index:1;
top: -2px;
#apDiv4 {
position:absolute;
width:963px;
height:58px;
z-index:1;
left: 0px;
top: 101px;
#apDiv5 {
position:absolute;
width:961px;
height:1505px;
z-index:1;
top: -5px;
#apDiv6 {
position:absolute;
width:962px;
height:150px;
z-index:1;
left: 0px;
top: -1px;
#apDiv7 {
position:absolute;
width:361px;
height:25px;
z-index:2;
left: 35px;
top: 1308px;
#apDiv8 {
position:absolute;
width:320px;
height:24px;
z-index:2;
left: 200px;
top: 1479px;
#apDiv9 {
position:absolute;
width:962px;
height:63px;
z-index:3;
left: -10px;
top: -1292px;
#apDiv10 {
position:absolute;
width:270px;
height:27px;
z-index:2;
left: 200px;
top: 1478px;
#apDiv11 {
position:absolute;
width:961px;
height:44px;
z-index:3;
left: 195px;
top: 183px;
-->
</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
position:absolute;
width:295px;
height:23px;
z-index:4;
left: 198px;
top: 1px;
#apDiv13 {
position:absolute;
width:135px;
height:22px;
z-index:5;
left: 1001px;
top: 3px;
#apDiv14 {
position:absolute;
width:309px;
height:992px;
z-index:1;
left: 33px;
top: 479px;
#apDiv15 {
position:absolute;
width:327px;
height:999px;
z-index:1;
left: 324px;
#apDiv16 {
position:absolute;
width:262px;
height:1000px;
z-index:2;
left: 674px;
top: 477px;
#apDiv17 {
position:absolute;
width:85px;
height:34px;
z-index:1;
left: -379px;
top: 1001px;
#apDiv18 {
position:absolute;
width:200px;
height:115px;
z-index:6;
#apDiv19 {
position:absolute;
width:168px;
height:31px;
z-index:3;
left: 448px;
top: 1451px;
#apDiv20 {
position:absolute;
width:94px;
height:33px;
z-index:3;
left: 384px;
top: 1477px;
body {
background-color: #000;
margin-left: 0px;
margin-right: 0px;
#apDiv21 {
position:absolute;
width:920px;
height:200px;
z-index:4;
left: 19px;
top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
<div id="apDiv5">
<div id="apDiv16">
<div id="apDiv17">
<map name="Map2" id="Map2">
<area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
</map>
<img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
</map>
</div>
</div>
<div id="apDiv21">
<blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote>
<p><img src="faithexplosion.png" width="314" height="225" /></p>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
</div>
<div id="apDiv14">
<div id="apDiv15">
<div>
<div>
<p> Special Message from Perry Stone </p>
<h2> Was Jesus Born on December 25?</h2>
<p> 12/20/2010 </p>
<p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
<p>Last year, in response to the growing number of Christians who celebrate Hanukkah but hate Christmas, I wrote an article for this website titled “Hanukkah or Christmas?” I explained why I think Jesus was either conceived or birthed on December 25.</p>
</div>
</div>
<div>
<div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
<p> Prophecy Update </p>
<h2> What Happened to Global Warming?</h2>
<p> 12/17/2010 </p>
<p> </p>
</div>
</div>
<div>
<div></div>
</div>
<div>
<div></div>
</div>
</div>
<div>
<p><font size="2">Special Word</font></p>
<p><font size="2">January 7th, 2011</font></p>
<p> <font size="2">Dear Viewers:</font></p>
<p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally prepared to take up our cross daily and venture out into the lost and</font></p>
<p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
</div>
<p> </p>
<div></div>
<div>
<!--// weAddFlash("lhi09hdr.swf",800, 100,"true","true","high","showall","true","#ffffff"); //--></div>
<div></div>
<p> </p>
</div>
<img src="lighthousegraphic2.jpg" width="960" height="1509" />
<div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
<map name="Map3" id="Map3">
<area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
</map>
</div>
</div>
<p> </p>
</div>
<!-- end .container --></div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
<li><a href="#">Home</a> </li>
<li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
<ul>
<li><a href="#">Fresh Word</a></li>
<li><a href="#">Itinerary</a></li>
<li><a href="#">Prophetic Word</a></li>
<li><a href="#">Sermons</a></li>
<li><a href="#">Special Words</a></li>
<li><a href="#">Word of Month</a></li>
</ul>
</li>
<li><a href="#">Men Ministry</a></li>
<li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
<ul>
<li><a href="#">Chris Gore</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
<ul>
<li><a href="#">Contact Us</a></li>
<li><a href="#">Donate</a></li>
<li><a href="#">Events</a></li>
<li><a href="#">Our Store</a></li>
<li><a href="#">Prayer Request</a></li>
<li><a href="#">Salvation</a></li>
<li><a href="#">Subscribe</a></li>
<li><a href="#">Vision</a></li>
<li><a href="#">We Believe</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Resources</a>
<ul>
<li><a href="#">Prepare for Disaster</a></li>
<li><a href="#">How to Fast</a></li>
<li><a href="#">Heaven & Hell</a></li>
<li><a href="#">Warfare Prayers</a></li>
<li><a href="#">Wisdom Words</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
<ul>
<li><a href="#">Article Archive</a></li>
<li><a href="#">Audio Prophecies</a></li>
<li><a href="#">Color for Year</a></li>
<li><a href="#">Major Articles</a></li>
<li><a href="#">Prophecy Archive</a></li>
<li><a href="#">Prophetic Articles</a></li>
<li><a href="#">Word for Year</a></li>
</ul>
</li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html -
Need help with the Vibrance adjustment in Photoshop CC 2014.
Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GDThank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected] -
I need help with the following:
I am currently making a Harry Potter short film and I'm doing a spell that hits my friend and my friend needs to be blown backwards (if you know what I mean, he needs to like kinda fly backwards because of the force from the spell).
Can you in anyway help me with this or give me an idea on how to proceed?
I've been thinking of setting a green screen up where the person jumps backwards on a mattress or similar.
Thank you so much, I really hope you can help me.
I have been searching the web for a long long time and didn't find any answer.
Contact:
Reply here
Skype: asgerrockzBe careful here. Someone yanking on another person rigged with a professional harness can suffer permanent spinal injury. I have a home and a family and I wouldn't attempt even a simple version of this kind of stunt without a rider on my liability policy, a professional and therefore bondable stunt coordinator, and a trained stunt person. No offence Todd but I'd never yank someone backward by a wire or cord attached to their torso.
You can do this very gently by having the actor just throw out their arms and jump backwards a bit then do the majority of the move in AE. Having the camera on a simple slider would also help. As the actor jumps back dolly the camera back on a slider.
I've been shooting and producing films for more than 40 years when not one injury on the set except for me. Fractured my L2 and L3 vertebrae on a fall with a SetadyCam in 1975 because we didn't do a thorough enough safety briefing. Don't just try and do something you think you have seen on YouTube without some serious planning. There's no need for anyone to get hurt on a set. -
Need Help with particular layout
Hi,
I need help with a particular layout with jsf.
I dont be able to get this layout with checkbox and inputtext.
label checkbox
label checkbox
label checkbox
label checkbox
label checkbox labelinputtext inputext
with panelgrid I obtain only this one
label checkbox
label checkbox
label checkbox labelinputtext inputext
label checkbox
label checkbox
But I want place inputext and its label next to the last checkbox.
Could someone help me? Thanks<h:panelGrid columns="2">
<h:selectManyCheckbox layout="pageDirection" styleClass="styled">
<f:selectItem itemLabel="Ischemica" itemValue="Ischemica"/>
<f:selectItem itemLabel="Ipertensiva" itemValue="Ipertensiva"/>
<f:selectItem itemLabel="Valvolare" itemValue="Valvolare"/>
<f:selectItem itemLabel="Cardiomiopatia" itemValue="Cardiomiopatia"/>
<f:selectItem itemLabel="Altro" itemValue="Altro" />
</h:selectManyCheckbox>
<h:panelGrid columns="2" styleClass="tableA" >
<h:outputText value="Specificare" />
<h:inputText value="" styleClass="styled2" />
</h:panelGrid>
</h:panelGrid>
In my css I insert class
.tableA{
vertical-align: bottom;
} -
FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!
I would suggest checking out http://www.logiforms.com. They have really good PDF support for both hosted PDF's and generating PDFs. You can:
populate PDF forms from a web form submission
Merge multiple PDF's together using conditional logic
Include uploaded images in the generated PDF
Get Electronic signatures on PDF's
Use conditional logic when creating PDF's
Convert HTML to PDF. You design in HTML and CSS and use form field wildcards and generate the PDF
More of the PDF features are explained here:
PDF Form Creator | PDF Form Maker | V3.Logiforms.com
They are also offering a 25% discount to anyone coming from Forms Central... -
Need help with PHP contact form
Hi guys,
I've made a PHP contact form for my site and need help with a couple of things:
The form action links an external PHP script (scripts/contact-form-script.php) but is there a way I can have it so the PHP script for the form is contained within the same PHP file as my contact form (contact.php)?
I tried just putting the form code at the top of contact.php but the browser automatically reads the anti-spam re-direct, so maybe that needs revising too?
The second thing is, how can I make the Name, Email and Message fields mandatory? So if a user tries to submit the form and hasn't filled in one of the required fields and clicks submit, contact.php reloads with a message at the top of the form saying something like 'Complete the required fields' and highlights the relevant field with a red border?
Here's the code for contact.php:
<form action="http://www.mydomain.com/scripts/contact-form-script.php" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" type="text" class="ctextField" /></p>
<p><strong>E-mail:*</strong><br />
<input name="email" type="text" class="ctextField" /></p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<textarea name="message" cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
And this is the PHP I'm using to submit the form data for contact-form-script.php:
<?php
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$message= '
<table cellspacing="0" cellpadding="8" border="0" width="500">
<tr>
<td colspan="2"></td>
</tr>
<tr bgcolor="#eeeeee">
<td width="154" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Name</strong></td>
<td width="314" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$name.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>E-mail address:</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$email.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Telephone number:</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$telephone.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Company:</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$company.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Address</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address1.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$address2.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Town</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$town.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>County</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$county.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Postcode</strong></td>
<td style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$postcode.'</td>
</tr>
<tr bgcolor="#eeeeee">
<td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;"><strong>Message</strong></td>
</tr>
<tr bgcolor="#eeeeee">
<td colspan="2" style="font-family:Verdana, Arial; font-size:11px; color:#333333;">'.$message.'</td>
</tr>
<tr><td colspan="2" style="padding:0px;"><img src="images/whitespace.gif" alt="" width="100%" height="1" /></td></tr>
</table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
Any help on this would be greatly appreciated.
Thank you and I hope to hear from you!
SMRevised code with form validation for Name Email and Message:
<?php
if (array_key_exists('submit', $_POST)) {
$name = $_POST['name'];
$email = $_POST['email'];
$telephone = $_POST['telephone'];
$company = $_POST['company'];
$address1 = $_POST['address1'];
$address2 = $_POST['address2'];
$town = $_POST['town'];
$county = $_POST['county'];
$postcode = $_POST['postcode'];
$formMessage = $_POST['message'];
if (empty($name)) {
$warning['name'] = "Please provide your name";
if (empty($email)) {
$warning['email'] = "Please provide your email";
if (empty($formMessage)) {
$warning['message'] = "Please provide your message";
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$to = "[email protected]";
$subject = "Contact from website";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html; charset=iso-8859-1\r\n";
$message= "
<table cellspacing='0' cellpadding='8' border='0' width='500'>
<tr>
<td colspan='2'></td>
</tr>
<tr bgcolor='#eeeeee'>
<td width='154' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Name</strong></td>
<td width='314' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$name."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>E-mail address:</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$email."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Telephone number:</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$telephone."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Company:</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$company."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Address</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address1."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$address2."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Town</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$town."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>County</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$county."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Postcode</strong></td>
<td style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$postcode."</td>
</tr>
<tr bgcolor='#eeeeee'>
<td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'><strong>Message</strong></td>
</tr>
<tr bgcolor='#eeeeee'>
<td colspan='2' style='font-family:Verdana, Arial; font-size:11px; color:#333333;'>".$formMessage."</td>
</tr>
<tr><td colspan='2' style='padding: 0px;'><img src='images/whitespace.gif' alt='' width='100%' height='1' /></td></tr>
</table>
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
if (!isset($warning)) {
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mydomain.com/sent.php' ) ;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">
p {
margin: 0;
padding: 10px 0 0 0;
.warning {
color:#C00;
</style>
</head>
<body>
<form action="" method="post" name="contact" id="contact">
<p><strong>Name:*</strong><br />
<input name="name" <?php if (isset($warning['name'])) { echo "style='border: 1px solid #C00'"; } ?> type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['name']."</p>"; }?>
</p>
<p><strong>E-mail:*</strong><br />
<input name="email" <?php if (isset($warning['email'])) { echo "style='border: 1px solid #C00'"; } ?>type="text" class="ctextField" />
<?php if (isset($warning['name'])) { echo "<p class='warning'>".$warning['email']."</p>"; }?>
</p>
<p><strong>Telephone:</strong><br />
<input name="telephone" type="text" class="ctextField" /></p>
<p><strong>Company:</strong><br />
<input name="company" type="text" class="ctextField" /></p>
<p><strong>Address:</strong><br />
<input name="address1" type="text" class="ctextField" /></p>
<p><input name="address2" type="text" class="ctextField" /></p>
<p><strong>Town:</strong><br />
<input name="town" type="text" class="ctextField" /></p>
<p><strong>County:</strong><br />
<input name="county" type="text" class="ctextField" /></p>
<p><strong>Postcode:</strong><br />
<input name="postcode" type="text" class="ctextField" /></p>
<p><strong>Message:*</strong><br />
<?php if (isset($warning['message'])) { echo "<p class='warning'>".$warning['message']."</p>"; }?>
<textarea name="message" <?php if (isset($warning['message'])) { echo "style='border: 1px solid #C00'"; } ?> cols="55" rows="8" class="ctextField"></textarea></p>
<p><input name="submit" value="SEND MESSAGE" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
</body>
</html> -
Need help with show/hide and layers moving
I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
> -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911 -
Need help with JTextArea and Scrolling
import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020What's the problem you're having ???
PS.
Maybe you are looking for
-
Help! I need to disable my phone number from my apple id
-
Zen Sync Manager doesn't work with Windows 7
I have a Zen 6GB MP3 player, firmware version .2.03_0.03.0. I recently upgraded my computer from Windows Vista to Windows 7. Sync Manager (looks like version 6.4.8.0, dated 7/7/2007) worked fine with Vista, and it even worked for a few days after I u
-
Problem getting packages of swing
i want to use the following packages : com.sun.java.swing.*; com.sun.java.swing.event.*; com.sun.java.swing.table.*; i am using jdk 6 and it does not contain dese packages .can anyone please tell ,from where i can get these packages ??
-
Hello Experts We use ATG 10.1.1 and multisite capability to render international sites such as AU, NZ, HK, EU and UK. Some of these sites respond with HTTP 500 internal server error for about 10-15 minutes every Tuesday. The sites are back up after t
-
Item category group for Sales of Nonstock Item with Order Specific Procurem
What will be the item category & group for the material for Sales of Nonstock Item with Order Specific Procurement.So that purchase requestation is created