Need help with my Pioneer dvd-rw dvr-115d. HLEP!!

Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW  DVR-115D:
  Firmware Revision:          1.18
  Interconnect:          ATAPI
  Burn Support:          Yes (Vendor Supported Drive)
  Profile Path:          /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
  Cache:          2000 KB
  Reads DVD:          Yes
  CD-Write:          -R, -RW
  DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
  Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
  Media:          Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8

The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/

Similar Messages

  • I need help with my External DVD-RW and my iMac

    I hope there is someone out there that can help me out. I was using my PC for burning DVDs and it just died. I've been using my Pioneer DVD burner in there and now I'm trying to use it on my Intel iMac. When I hooked it up using an external firewire case, this is what shows up in my profiler.
    PIONEER DVD-RW DVR-110D:
    Firmware Revision: 1.41
    Interconnect: FireWire
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Even though it is Apple supported, nothing mounts and it cannot burn anything in Finder, iTunes, Toast, etc. Can someone out there help me out.
    Thanks in advance!
    Montri - THAIICE

    I have a Pioneer 110-D flashed to a 110 in an external firewire case and I can burn with all my apps.
    This is my profile:
    PIONEER DVD-RW DVR-110:
    Firmware Revision: 1.41
    Interconnect: FireWire
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RAM, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    You could try a different firewire even though profiler sees the drive.

  • Burning dual layer dvd+rs with a pioneer dvd-rw dvr-112 with firmware 1.15

    can i do this? i have tried once before and failed, if i have to update firmware do i follow the same instructions as for the dvr-109 as in the below thread/topic? i always us verbatim dvds so that shouldn't be an issue. i notice that dvd-r dual layer dvds are getting scarce and are pricey...... exact instructions would be very helpful if i have to update the firmware would be very very much appreciated as i've heard updating firmware is tricky and risky if not done right proper!!! cheers in advance......

    Hi-
    Welcome to Discussions!
    OS X 10.4 supports DVD+R DL burning.
    So does the Pioneer.
    DVD-R DL isn't supported in OS X10.4, but is in OS X 10.5.
    i have tried once before and failed,
    What was the failure? Error reported? What method was used?
    Firmware versions up to 1.24 are available, though 1.15 had the improvements for DL burning. 1.21 adds for specific media, and 1.24 improve CD-R support.
    http://wwwbsc.pioneer.co.jp/product-e/ibs/devicee/dev00002r_e.html#f112
    If you consider updating the firmware, the method is exactly the same as for other drives, using DVRFlash.

  • Deadline Need Help with HD VS DVD Best Quality 4.3 NTSC

    I just wanted to know if I made a DVD using HD MPEG2 and handed it out to people who do not have an HD TV will they be able to watch the screen normally or will the screen be too big, text off the screen?
    I Just tried to import a HD MPEG into DVD Studio Pro 4 and got an error message that said it was unsupported.
    It look so much better when I experimentd with a small vewrsion of my movie. They will use NTSC more than likely or a windows computer to show to clients.
    What settings are best for that?

    To the best of my knowledge there are no commercially available HD DVD players. Thus, although you can create a DVD with HD material you can't view it with any set-top DVD player or on a standard TV. You'd need a computer to view the HD MPEG2 material. The display would either have to be a computer monitor or a TV that could accept high-definition output (DVI) from the computer itself.
    In any case, you won't be able to create an HD DVD disc with standard DVD menus and navigation controls (at least not with DVDSP). Think of the DVD as a simple storage medium, not any form of a standard DVD video disc.

  • Need help with my CD DVD Drive

    I'll apologize in advance, because I know this message is going to be confusing, but if you can stick with me to the end, you will understand why.
    Basically, the problem is that although my Powermac G4 can read almost any commercial disk, it is unpredictable when it comes to those I have burned. But here is what's going on:
    1) Until recently, I was plugging along quite happily with 2 Macs: (a) a PowerMc G4, purchased some time around 1999 and (b) an iMac G3 , which I bought about 2 years later. Also had (and still have) a Mac Notebook, which I bought around 2003-04, but until recently had only used once or twice.
    2) Both the Notebook and G3 were running on OS 10.2.8, and the G4 on OS 9.2, which enabled me to continue to work with older files that I still rely on. The G3 and G4 are also networked via ethernet.
    Hope I haven't lost you yet, because this is where things get confusing . . .
    3) All 3 of the above Macs came with CD drives, but no two are alike. The G4 has a Matshita CD/DVD drive and software version 1.4.5., but no burner. The iMac G3 reads and burns disks, but I can't tell you the software version, because, as I'll explain next, I can't see it at this moment. But it does not read DVDs. The Notebook has a read-only drive (version 1.4.8).
    4) All was well until about 8 weeks ago, when the optical drive in the G3 started sticking and finally died with a disk (that belonged to a client) in the drive. After much panic, I managed to retrieve the disk, but meanwhile had learned that the problem probably was due to the treads on the slot drive having worn out, and spoke with several repair shop techs who said it would cost in excess of $300 to repair.
    Meanwhile, I had discovered the just-released Mac/ Intel, fell in love with it and decided, "What the heck, I deserve it." So I bought one and immediately started to assemble old data strewn across both the G4 and G3 for burning. At this point, I've been at it for several weeks, but right now am unable to view info because it is connected to the Mac/Intel via firewire.
    Since the drive on my old G3 was kaput, I tested the first disk I burned on the G4 and breathed a sigh of relief when, after a relatively long boot up time, it finally popped up on the desktop. When the next disk I burned failed to show up at all, I suspected it might be a bad disk (even though it was a major brand name), so immediately burned another from a new pack of disks. If failed to load, too. But when I tried them on my Notebook, both appeared on the desktop within seconds.
    So my question now, is where do I go from here?
    Since the G4's ability to read burned CDs had always been flaky, I had figured it might have something to do with the speed of the burner. Now I'm not sure — especially since I burned the latest disks at a slow speed, and as I've descrbed, the results are still erratic. (i.e., At least one of them works on all 3 computers, including my new Mac/Intel but not the G3 with the broken drive . .. and the others only work on the Notebook and Mac/Intel.)
    I've also wondered if there's been a software upgrade for the CD/DVD drive on the G4 that will work with OS 9.2. (Really don't want to upgrade that system yet . . especially since I'd like to continue using some of my older apps, which probably will not work on my newest Mac.) For the same reason (i.e., concern that it might prevent old apps from working), I've always ignored the automatic software update announcements that pop up on my screen each month — but when I checked the Apple site earlier this evening I couldn't find any anyway.
    I'm hoping someone out there will know what I'm talking about and have a suggestion or two that I can try.
    Thanks for your attention.
    cs

    Thanks, Joseph . . .
    Meant to reply yesterday, but I was busy all day, working to save and burn those files. But I did want you to know that I took your advice and picked up a Memorex laser lens cleaner disk. Contrary to the salesman's insistence when I asked, it really did seem designed more for drives that play mainly music CDs than graphics ( the only thing that interests me) . . . because tracks 5-14 all dealt with testing sound and there was no way for me to stop the process (as the narrator suggests) because that's not an option on my Mac.
    Consequently, I only ran it once. But I did notice a definite improvement in how quickly icons for my burned disks appeared on my G4 desktop. Only problem was that they would not open on that computer although they do on my iBook, which also has PM 6.5 installed. And while they also show up on my Mac/Intel, it can't read them bcause it does not recognize the application — and according to what I've hust learned, NEVER will. (A warning to anyone else with a stockpile of PM documents they hope to play: Better find and learn another page layout application future Macs will read and start converting those docs asap . . . or at least before your older machine dies.)
    Also tried copying the primary document (the other files just contain support data , such as graphic/photos, etc.) — but that failed, too.
    So it looks like I'm back to square #1 — but still thinking the problem might somehow be related to the size of the document (139MB) even though my G4 has 920 MB ROM (vers. 8.3.1) and total hard drive space of 95 GB . . . Long ago, I also increased the recommended memory for PM from 5,200k to 50,000k. The only thing that makes me question my premise re: size is that the doc opens without difficulty on my little iMac, which only has a ROM CD drive.
    PowerMac G4/IMac G3/iMac Intel/iBook   Mac OS X (10.2.x)  

  • Need help with my missing dvd-driver

    I've had my MacBook Pro since 2009 and I have updated to Mac OS X, Lion and then Mountain Lion over the years.. Well, somewhere along the way I have lost my dvd driver. I don't know if it was because I installed a third part dvd driver or not but I am currently unable to burn music through iTunes. When inserting a blank cd to my macbook, iTunes does not seem to detect it. I know the newer MBPs don't have a dvd driver anymore and I don't know if any of this is related to my problem or if it's something totally different. I am wondering if I'm the only person having this issue. Please suggest options I could take to resolve this issue. Thank you.

    There is no driver. Never was.
    "When inserting a blank cd to my macbook, iTunes does not seem to detect it"
    You need to set up what you want to happen when you insert a cd into your MacBook Pro(?). System Preferences>CD's & DVD's.

  • Need help with port forwarding an Avtech DVR

    For some reason I can't get my Avtech DVR to work on my android phone on Avtech's Eagle Eyes app.
    The camera/dvr comes up on wifi, but not on 4g. I am trying to get the port forwarding to work, but its not working. It says the ip address is not accesible.
    The port for the dvr is 80. This is what I have. I thought it was correct?
     I have a Westell 9100EM router.
    Solved!
    Go to Solution.

    Thought I'd post an update to this. I fixed it. I had to change ports on my dvr.

  • Need Help with External DVD Drive on my iMac

    Hi, This is my first post and I hope there is someone out there that can help me. My PC just died and I'm finally moving on and taking it where it belongs, the dumpster. Anyways, I've been using my Pioneer DVD burner in there and now I'm trying to use it on my Intel iMac. When I hooked it up using an external firewire case, this is what shows up in my profiler.
    PIONEER DVD-RW DVR-110D:
    Firmware Revision: 1.41
    Interconnect: FireWire
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No
    Even though it is Apple supported, nothing mounts and it cannot burn anything in iTunes, Toast, etc. Can someone out there help me out.
    Thanks in advance!
    Montri - THAIICE

    Apple Discussions!
    Since you have an Intel, you will need to repost in the Using DVDs and CDs with your Intel-based iMac Forum so that users using the same model computer as yourself will be able to help you.
    This is the G5 iMac Forum.

  • Pioneer DVD-RW DVR-K06 replacement drive needed

    My iMac started having problem ejecting DVD/CDs and now the drive is damaged. I need to find a replacement drive (AppleCare expired). I know there are 2 possible types of superdrives were used on the late 2006 24" iMac. One is with a 12.7mm slot and the other one is 9.5mm. I am not sure which one I should get but here is my specs. I think the DVR-K0-6 is discontinued. Could someone tell me what replacement drive I can use? thx CK
    Pioneer DVD-RW DVR-K06 Firmware: Q609 ATAPI
    Model Identifier: iMac6,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.16 GHz
    Message was edited by: calvin ki

    Hi calvin ki
    You can get either new or refurbished OEM drive from WeLoveMacs
    New Apple Original Part > http://www.welovemacs.com/6614391.html
    Refurbished pulled from a working machine > http://www.welovemacs.com/6614391r.html
    Or for way less $'s an External Drive > http://eshop.macsales.com/shop/firewire/optical-drives/
    Dennis

  • Need help with boot

    Hello all!
    After some weeks I didn't turn on my pc, now it doesn't boot. Udev doesn't start while booting. Just writes what can't mount /dev/sda3 partition whitch is my / partition and I need to type my root password or press Ctrl+D to restart. I use grub2, whe menu.lst file is almost original and I have no idea what's wrong. Help me please.
    P.S. when I type my password system takes me to console and I am allowed to use console programs like ranger. In ranger I can see my / partition, but where is no my home partition in /home directory, which is /dev/sda4.
    LiveCD works ok and I am allowed to use all my data and partitions.

    MoonSwan wrote:If you have a kernel log or faillog or dmesg.log or syslog ... assuming they have errors that they are spitting out for us to look at.
    dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011
    [ 0.000000] Command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
    [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP43-S3L/EP43-S3L, BIOS F8 09/22/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 100000000 mask FC0000000 write-back
    [ 0.000000] 4 base 130000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000f5690] f5690
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
    [ 0.000000] 0000000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cfee0000 page 4k
    [ 0.000000] kernel direct mapping tables up to cfee0000 @ cfeda000-cfee0000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
    [ 0.000000] 0100000000 - 0130000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
    [ 0.000000] RAMDISK: 37e40000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f7080 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000cfee3180 04B8A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
    [ 0.000000] ACPI: FACS 00000000cfee0000 00040
    [ 0.000000] ACPI: HPET 00000000cfee7e80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000cfee7f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: APIC 00000000cfee7d80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: SSDT 00000000cfee85a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000130000000
    [ 0.000000] NUMA: Using 63 for the hash shift.
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
    [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
    [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00130000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cfee0
    [ 0.000000] 0: 0x00100000 -> 0x00130000
    [ 0.000000] On node 0 totalpages: 1048175
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
    [ 0.000000] Normal zone: 2688 pages used for memmap
    [ 0.000000] Normal zone: 193920 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
    [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83136 r8192 d23360 u524288
    [ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031146
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 4055384k/4980736k available (4019k kernel code, 788036k absent, 137316k reserved, 3335k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3166.654 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6335.19 BogoMIPS (lpj=10555513)
    [ 0.003395] pid_max: default: 32768 minimum: 301
    [ 0.003510] Security Framework initialized
    [ 0.003542] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006914] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.008537] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.009309] Mount-cache hash table entries: 256
    [ 0.009640] Initializing cgroup subsys ns
    [ 0.009670] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.009705] Initializing cgroup subsys cpuacct
    [ 0.009756] Initializing cgroup subsys memory
    [ 0.009796] Initializing cgroup subsys devices
    [ 0.009825] Initializing cgroup subsys freezer
    [ 0.009854] Initializing cgroup subsys net_cls
    [ 0.009882] Initializing cgroup subsys blkio
    [ 0.009950] CPU: Physical Processor ID: 0
    [ 0.009978] CPU: Processor Core ID: 0
    [ 0.010007] mce: CPU supports 6 MCE banks
    [ 0.010041] CPU0: Thermal monitoring enabled (TM2)
    [ 0.010071] using mwait in idle threads.
    [ 0.010933] ACPI: Core revision 20110316
    [ 0.013361] ftrace: allocating 15965 entries in 63 pages
    [ 0.016697] Setting APIC routing to flat
    [ 0.017018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.052003] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
    [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.053330] ... version: 2
    [ 0.053330] ... bit width: 40
    [ 0.053330] ... generic registers: 2
    [ 0.053330] ... value mask: 000000ffffffffff
    [ 0.053330] ... max period: 000000007fffffff
    [ 0.053330] ... fixed-purpose events: 3
    [ 0.053330] ... event mask: 0000000700000003
    [ 0.070071] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.096674] Booting Node 0, Processors #1
    [ 0.096727] smpboot cpu 1: start_ip = 9a000
    [ 0.193346] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203357] Total of 2 processors activated (12706.79 BogoMIPS).
    [ 0.204779] devtmpfs: initialized
    [ 0.204779] PM: Registering ACPI NVS region at cfee0000 (12288 bytes)
    [ 0.204779] print_constraints: dummy:
    [ 0.204779] NET: Registered protocol family 16
    [ 0.204779] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204779] ACPI: bus type pci registered
    [ 0.204779] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.204779] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.211260] PCI: Using configuration type 1 for base access
    [ 0.213358] bio: create slab <bio-0> at 0
    [ 0.213894] ACPI: EC: Look up EC in DSDT
    [ 0.218082] ACPI: SSDT 00000000cfee7f80 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.218283] ACPI: Dynamic OEM Table Load:
    [ 0.218356] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.218513] ACPI: SSDT 00000000cfee8440 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.218704] ACPI: Dynamic OEM Table Load:
    [ 0.218776] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.218946] ACPI: Interpreter enabled
    [ 0.218976] ACPI: (supports S0 S3 S4 S5)
    [ 0.219103] ACPI: Using IOAPIC for interrupt routing
    [ 0.221962] ACPI: No dock devices found.
    [ 0.221991] HEST: Table not found.
    [ 0.222020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.222086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.222185] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.222216] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.222246] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.222279] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.222847] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
    [ 0.222888] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.222915] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.222936] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.222938] pci 0000:00:01.0: PME# disabled
    [ 0.222966] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.223000] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f]
    [ 0.223034] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.223067] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f]
    [ 0.223101] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.223134] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f]
    [ 0.223172] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.223185] pci 0000:00:1a.7: reg 10: [mem 0xe8104000-0xe81043ff]
    [ 0.223249] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.223261] pci 0000:00:1b.0: reg 10: [mem 0xe8100000-0xe8103fff 64bit]
    [ 0.223303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.223305] pci 0000:00:1b.0: PME# disabled
    [ 0.223319] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.223354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.223357] pci 0000:00:1c.0: PME# disabled
    [ 0.223376] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
    [ 0.223418] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.223421] pci 0000:00:1c.4: PME# disabled
    [ 0.223436] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.223478] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.223480] pci 0000:00:1c.5: PME# disabled
    [ 0.223498] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.223531] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
    [ 0.223565] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.223599] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
    [ 0.223633] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.223666] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
    [ 0.223704] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.223717] pci 0000:00:1d.7: reg 10: [mem 0xe8105000-0xe81053ff]
    [ 0.223779] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.223822] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
    [ 0.223909] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.223921] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
    [ 0.223927] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
    [ 0.223933] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
    [ 0.223939] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
    [ 0.223945] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
    [ 0.223951] pci 0000:00:1f.2: reg 24: [io 0xf100-0xf10f]
    [ 0.223978] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.223990] pci 0000:00:1f.3: reg 10: [mem 0xe8106000-0xe81060ff 64bit]
    [ 0.224006] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
    [ 0.224030] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.224041] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707]
    [ 0.224047] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803]
    [ 0.224053] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907]
    [ 0.224059] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03]
    [ 0.224065] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f]
    [ 0.224071] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
    [ 0.224118] pci 0000:01:00.0: [1002:9440] type 0 class 0x000300
    [ 0.224129] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.224137] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff 64bit]
    [ 0.224143] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
    [ 0.224153] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.224167] pci 0000:01:00.0: supports D1 D2
    [ 0.224181] pci 0000:01:00.1: [1002:aa30] type 0 class 0x000403
    [ 0.224191] pci 0000:01:00.1: reg 10: [mem 0xe5010000-0xe5013fff 64bit]
    [ 0.224228] pci 0000:01:00.1: supports D1 D2
    [ 0.224244] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.224274] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.224276] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
    [ 0.224279] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.224309] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.224339] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.224342] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.224347] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.224391] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
    [ 0.224417] pci 0000:03:00.0: reg 10: [io 0xc000-0xc007]
    [ 0.224429] pci 0000:03:00.0: reg 14: [io 0xc100-0xc103]
    [ 0.224441] pci 0000:03:00.0: reg 18: [io 0xc200-0xc207]
    [ 0.224452] pci 0000:03:00.0: reg 1c: [io 0xc300-0xc303]
    [ 0.224464] pci 0000:03:00.0: reg 20: [io 0xc400-0xc40f]
    [ 0.224534] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.224565] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.224567] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
    [ 0.224571] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.224616] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.224630] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
    [ 0.224654] pci 0000:04:00.0: reg 18: [mem 0xe8010000-0xe8010fff 64bit pref]
    [ 0.224669] pci 0000:04:00.0: reg 20: [mem 0xe8000000-0xe800ffff 64bit pref]
    [ 0.224679] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.224712] pci 0000:04:00.0: supports D1 D2
    [ 0.224714] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.224718] pci 0000:04:00.0: PME# disabled
    [ 0.224746] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    [ 0.224777] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
    [ 0.224779] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
    [ 0.224784] pci 0000:00:1c.5: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
    [ 0.224832] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.224863] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.224866] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.224870] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.224872] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.224874] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.224875] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.224877] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.224879] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
    [ 0.224895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.224961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.224984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    [ 0.225008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    [ 0.225027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.225077] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.225107] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.230967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.231315] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [ 0.231663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.232011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.232358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.232750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.233097] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    [ 0.233419] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [ 0.233809] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.233844] vgaarb: loaded
    [ 0.233931] PCI: Using ACPI for IRQ routing
    [ 0.233960] PCI: pci_cache_line_size set to 64 bytes
    [ 0.234020] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.234022] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
    [ 0.234113] NetLabel: Initializing
    [ 0.234141] NetLabel: domain hash size = 128
    [ 0.234169] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.234208] NetLabel: unlabeled traffic allowed by default
    [ 0.234246] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.234278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.234418] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.243335] Switching to clocksource hpet
    [ 0.243372] Switched to NOHz mode on CPU #0
    [ 0.246609] Switched to NOHz mode on CPU #1
    [ 0.247851] pnp: PnP ACPI init
    [ 0.247887] ACPI: bus type pnp registered
    [ 0.247960] pnp 00:00: [bus 00-3f]
    [ 0.247962] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.247963] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.247965] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.247966] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.247968] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.247969] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
    [ 0.248003] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.248049] pnp 00:01: [io 0x0010-0x001f]
    [ 0.248051] pnp 00:01: [io 0x0022-0x003f]
    [ 0.248052] pnp 00:01: [io 0x0044-0x005f]
    [ 0.248053] pnp 00:01: [io 0x0062-0x0063]
    [ 0.248054] pnp 00:01: [io 0x0065-0x006f]
    [ 0.248055] pnp 00:01: [io 0x0074-0x007f]
    [ 0.248056] pnp 00:01: [io 0x0091-0x0093]
    [ 0.248057] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.248059] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.248060] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.248061] pnp 00:01: [io 0x0290-0x029f]
    [ 0.248062] pnp 00:01: [io 0x0800-0x087f]
    [ 0.248063] pnp 00:01: [io 0x0290-0x0294]
    [ 0.248064] pnp 00:01: [io 0x0880-0x088f]
    [ 0.248065] pnp 00:01: [io 0x04c0-0x04ff]
    [ 0.248113] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.248143] system 00:01: [io 0x0290-0x029f] has been reserved
    [ 0.248173] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.248203] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.248232] system 00:01: [io 0x0880-0x088f] has been reserved
    [ 0.248262] system 00:01: [io 0x04c0-0x04ff] could not be reserved
    [ 0.248293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.248300] pnp 00:02: [dma 4]
    [ 0.248302] pnp 00:02: [io 0x0000-0x000f]
    [ 0.248303] pnp 00:02: [io 0x0080-0x0090]
    [ 0.248304] pnp 00:02: [io 0x0094-0x009f]
    [ 0.248305] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.248324] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.248356] pnp 00:03: [irq 0 disabled]
    [ 0.248363] pnp 00:03: [irq 8]
    [ 0.248364] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.248387] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.248403] pnp 00:04: [io 0x0070-0x0073]
    [ 0.248424] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.248431] pnp 00:05: [io 0x0061]
    [ 0.248452] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.248458] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.248462] pnp 00:06: [irq 13]
    [ 0.248483] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.248557] pnp 00:07: [io 0x03f0-0x03f5]
    [ 0.248559] pnp 00:07: [io 0x03f7]
    [ 0.248562] pnp 00:07: [irq 6]
    [ 0.248563] pnp 00:07: [dma 2]
    [ 0.248592] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.248697] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.248701] pnp 00:08: [irq 4]
    [ 0.248742] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.248856] pnp 00:09: [io 0x0378-0x037f]
    [ 0.248860] pnp 00:09: [irq 7]
    [ 0.248893] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.248958] pnp 00:0a: [io 0x0060]
    [ 0.248959] pnp 00:0a: [io 0x0064]
    [ 0.248963] pnp 00:0a: [irq 12]
    [ 0.248984] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.249017] pnp 00:0b: [io 0x0400-0x04bf]
    [ 0.249052] system 00:0b: [io 0x0400-0x04bf] has been reserved
    [ 0.249083] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.249196] pnp 00:0c: [mem 0xe0000000-0xe3ffffff]
    [ 0.249236] system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
    [ 0.249267] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.249343] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
    [ 0.249344] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
    [ 0.249346] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
    [ 0.249347] pnp 00:0d: [mem 0x000fc000-0x000fffff]
    [ 0.249348] pnp 00:0d: [mem 0xcfee0000-0xcfefffff]
    [ 0.249349] pnp 00:0d: [mem 0x00000000-0x0009ffff]
    [ 0.249351] pnp 00:0d: [mem 0x00100000-0xcfedffff]
    [ 0.249352] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
    [ 0.249355] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
    [ 0.249356] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
    [ 0.249357] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
    [ 0.249359] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
    [ 0.249360] pnp 00:0d: [mem 0xfff00000-0xffffffff]
    [ 0.249361] pnp 00:0d: [mem 0x000e0000-0x000effff]
    [ 0.249408] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
    [ 0.249439] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
    [ 0.249470] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.249500] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.249531] system 00:0d: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.249561] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.249592] system 00:0d: [mem 0x00100000-0xcfedffff] could not be reserved
    [ 0.249622] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.249652] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
    [ 0.249683] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.249713] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.249743] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.249773] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.249803] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.249833] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.249845] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
    [ 0.249874] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.249878] pnp: PnP ACPI: found 15 devices
    [ 0.249906] ACPI: ACPI bus type pnp unregistered
    [ 0.255617] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe8200000-0xe83fffff 64bit pref]
    [ 0.255652] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8400000-0xe85fffff]
    [ 0.255684] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8600000-0xe87fffff 64bit pref]
    [ 0.255718] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.255748] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
    [ 0.255782] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.255811] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.255841] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
    [ 0.255872] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.255907] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.255936] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.255968] pci 0000:00:1c.0: bridge window [mem 0xe8400000-0xe85fffff]
    [ 0.255999] pci 0000:00:1c.0: bridge window [mem 0xe8600000-0xe87fffff 64bit pref]
    [ 0.256035] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.256065] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.256097] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
    [ 0.256128] pci 0000:00:1c.4: bridge window [mem 0xe8200000-0xe83fffff 64bit pref]
    [ 0.256164] pci 0000:04:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff pref]
    [ 0.256197] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
    [ 0.256227] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
    [ 0.256259] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
    [ 0.256290] pci 0000:00:1c.5: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
    [ 0.256326] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    [ 0.256355] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.256386] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.256416] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.256453] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.256484] pci 0000:00:01.0: setting latency timer to 64
    [ 0.256488] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.256520] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.256524] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.256555] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.256560] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.256591] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.256596] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.256598] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.256600] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.256601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.256603] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.256604] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
    [ 0.256606] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.256607] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
    [ 0.256609] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.256610] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.256612] pci_bus 0000:02: resource 1 [mem 0xe8400000-0xe85fffff]
    [ 0.256613] pci_bus 0000:02: resource 2 [mem 0xe8600000-0xe87fffff 64bit pref]
    [ 0.256615] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.256617] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe6ffffff]
    [ 0.256618] pci_bus 0000:03: resource 2 [mem 0xe8200000-0xe83fffff 64bit pref]
    [ 0.256620] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.256621] pci_bus 0000:04: resource 1 [mem 0xe7000000-0xe7ffffff]
    [ 0.256623] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xe80fffff 64bit pref]
    [ 0.256624] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.256626] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.256627] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.256629] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.256630] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff]
    [ 0.256691] NET: Registered protocol family 2
    [ 0.256846] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.257622] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.260343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.260736] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.260766] TCP reno registered
    [ 0.260800] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.260856] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.261103] NET: Registered protocol family 1
    [ 0.261271] pci 0000:01:00.0: Boot video device
    [ 0.261279] PCI: CLS 32 bytes, default 64
    [ 0.261320] Unpacking initramfs...
    [ 0.280521] Freeing initrd memory: 1728k freed
    [ 0.280747] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.280777] Placing 64MB software IO TLB between ffff8800cbeda000 - ffff8800cfeda000
    [ 0.280811] software IO TLB at phys 0xcbeda000 - 0xcfeda000
    [ 0.281112] audit: initializing netlink socket (disabled)
    [ 0.281149] type=2000 audit(1309681092.279:1): initialized
    [ 0.281549] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.283195] VFS: Disk quotas dquot_6.5.2
    [ 0.283324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.283483] msgmni has been set to 7924
    [ 0.283664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.283722] io scheduler noop registered
    [ 0.283751] io scheduler deadline registered
    [ 0.283811] io scheduler cfq registered (default)
    [ 0.283920] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.283942] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.283973] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.283999] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.284043] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.284069] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    [ 0.284110] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.284136] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.284239] intel_idle: MWAIT substates: 0x22220
    [ 0.284240] intel_idle: does not run on family 6 model 23
    [ 0.284245] ERST: Table is not found!
    [ 0.284310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.304821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.520640] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.573586] Linux agpgart interface v0.103
    [ 0.573677] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
    [ 0.573707] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    [ 0.574077] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.574138] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.574260] mousedev: PS/2 mouse device common for all mice
    [ 0.574354] rtc_cmos 00:04: RTC can wake from S4
    [ 0.600105] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.600160] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.600205] cpuidle: using governor ladder
    [ 0.600234] cpuidle: using governor menu
    [ 0.600407] TCP cubic registered
    [ 0.600436] NET: Registered protocol family 17
    [ 0.600470] Registering the dns_resolver key type
    [ 0.600564] PM: Hibernation image not present or could not be loaded.
    [ 0.600567] registered taskstats version 1
    [ 0.601031] rtc_cmos 00:04: setting system clock to 2011-07-03 08:18:13 UTC (1309681093)
    [ 0.601083] Initializing network drop monitor service
    [ 0.602022] Freeing unused kernel memory: 712k freed
    [ 0.602239] Write protecting the kernel read-only data: 6144k
    [ 0.602468] Freeing unused kernel memory: 60k freed
    [ 0.604398] Freeing unused kernel memory: 784k freed
    [ 0.611895] udevd[53]: starting version 171
    [ 0.669709] SCSI subsystem initialized
    [ 0.686607] libata version 3.00 loaded.
    [ 0.687348] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.687411] pata_jmicron 0000:03:00.0: setting latency timer to 64
    [ 0.687623] scsi0 : pata_jmicron
    [ 0.687706] scsi1 : pata_jmicron
    [ 0.688068] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
    [ 0.688099] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
    [ 0.698563] ata_piix 0000:00:1f.2: version 2.13
    [ 0.698616] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.698649] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.698816] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.699016] scsi2 : ata_piix
    [ 0.699082] scsi3 : ata_piix
    [ 0.699361] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.699394] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 0.699443] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.699486] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.700200] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.700348] scsi4 : ata_piix
    [ 0.700415] scsi5 : ata_piix
    [ 0.700674] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
    [ 0.700706] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
    [ 0.847198] ata1.00: ATAPI: PIONEER DVD-RW DVR-112, 1.15, max UDMA/66
    [ 0.847229] ata1.00: limited to UDMA/33 due to 40-wire cable
    [ 0.860530] ata1.00: configured for UDMA/33
    [ 0.873346] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112 1.15 PQ: 0 ANSI: 5
    [ 1.030714] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.174170] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.180268] ata6.00: HPA detected: current 1250261615, native 1250263728
    [ 1.180306] ata6.00: ATA-8: WDC WD6400AAKS-00E4A0, 05.01D05, max UDMA/133
    [ 1.180340] ata6.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.186942] ata6.00: configured for UDMA/133
    [ 1.283819] Refined TSC clocksource calibration: 3166.306 MHz.
    [ 1.283855] Switching to clocksource tsc
    [ 1.497568] ata4.00: SATA link down (SStatus 0 SControl 300)
    [ 1.497610] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.508469] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.508508] ata3.01: SATA link down (SStatus 0 SControl 300)
    [ 1.508544] ata3.01: link offline, clearing class 3 to NONE
    [ 1.513515] ata4.01: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
    [ 1.513553] ata4.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.524091] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [ 6.507978] ata4.01: configured for UDMA/133
    [ 7.400696] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 7.400740] ata3.01: SATA link down (SStatus 0 SControl 300)
    [ 7.400781] ata3.01: link offline, clearing class 3 to NONE
    [ 12.400139] ata3.00: qc timeout (cmd 0xa1)
    [ 12.400172] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [ 12.400209] ata3.00: limiting SATA link speed to 1.5 Gbps
    [ 13.194235] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.194279] ata3.01: SATA link down (SStatus 0 SControl 300)
    [ 13.194319] ata3.01: link offline, clearing class 3 to NONE
    [ 13.210692] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [ 19.993662] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 19.993706] ata3.01: SATA link down (SStatus 0 SControl 300)
    [ 19.993747] ata3.01: link offline, clearing class 3 to NONE
    [ 19.993841] scsi 3:0:1:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
    [ 19.994011] scsi 5:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 05.0 PQ: 0 ANSI: 5
    [ 20.002921] sd 3:0:1:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 20.002987] sd 3:0:1:0: [sda] Write Protect is off
    [ 20.003017] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
    [ 20.003031] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 20.003301] sd 5:0:0:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
    [ 20.003373] sd 5:0:0:0: [sdb] Write Protect is off
    [ 20.003403] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 20.003418] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 20.015573] sdb: sdb1
    [ 20.015681] sda: sda1 sda2 sda3 sda4
    [ 20.015805] sd 5:0:0:0: [sdb] Attached SCSI disk
    [ 20.015955] sd 3:0:1:0: [sda] Attached SCSI disk
    [ 20.025385] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 20.025426] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 20.025626] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 20.503523] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 21.720234] udevd[241]: starting version 171
    [ 21.849284] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 21.849289] ACPI: Power Button [PWRB]
    [ 21.849336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 21.849338] ACPI: Power Button [PWRF]
    [ 21.909230] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 21.909234] Disabling lock debugging due to kernel taint
    [ 21.960993] [fglrx] Maximum main memory to use for locked dma buffers: 3801 MBytes.
    [ 21.961188] [fglrx] vendor: 1002 device: 9440 count: 1
    [ 21.961560] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
    [ 21.961570] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 21.961574] pci 0000:01:00.0: setting latency timer to 64
    [ 21.961775] [fglrx] Kernel PAT support is enabled
    [ 21.961791] [fglrx] module loaded - fglrx 8.85.6 [Apr 19 2011] with 1 minors
    [ 22.112266] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 22.112311] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 22.112329] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 22.200599] ACPI: acpi_idle registered with cpuidle
    [ 22.200655] Marking TSC unstable due to TSC halts in idle
    [ 22.203161] Switching to clocksource hpet
    [ 22.216025] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 22.216082] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
    [ 22.216101] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 22.221167] iTCO_vendor_support: vendor-support=0
    [ 22.241200] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 22.241269] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
    [ 22.241300] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 22.241314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 22.279576] input: PC Speaker as /devices/platform/pcspkr/input/input2
    [ 22.305609] Floppy drive(s): fd0 is 1.44M
    [ 22.320314] FDC 0 is a post-1991 82077
    [ 22.423422] usbcore: registered new interface driver usbfs
    [ 22.423488] usbcore: registered new interface driver hub
    [ 22.423628] usbcore: registered new device driver usb
    [ 22.447059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 22.447088] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 22.447114] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 22.447117] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 22.447134] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 22.461785] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 22.461798] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 22.461836] r8169 0000:04:00.0: setting latency timer to 64
    [ 22.461895] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
    [ 22.462108] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000666000, 00:1f:d0:8c:36:ca, XID 1c4000c0 IRQ 46
    [ 22.463918] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 22.463934] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8104000
    [ 22.465525] IT8718 SuperIO detected.
    [ 22.465700] parport_pc 00:09: reported by Plug and Play ACPI
    [ 22.465755] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 22.471538] ppdev: user-space parallel port driver
    [ 22.476684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 22.476836] hub 1-0:1.0: USB hub found
    [ 22.476845] hub 1-0:1.0: 6 ports detected
    [ 22.476907] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 22.476921] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 22.476923] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 22.476934] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 22.501210] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 22.501224] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8105000
    [ 22.513363] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 22.513456] hub 2-0:1.0: USB hub found
    [ 22.513459] hub 2-0:1.0: 6 ports detected
    [ 22.604551] uhci_hcd: USB Universal Host Controller Interface driver
    [ 22.604601] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 22.604608] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 22.604610] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 22.604620] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 22.609461] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [ 22.609490] sd 3:0:1:0: Attached scsi generic sg1 type 0
    [ 22.609513] sd 5:0:0:0: Attached scsi generic sg2 type 0
    [ 22.616717] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
    [ 22.616861] hub 3-0:1.0: USB hub found
    [ 22.616865] hub 3-0:1.0: 2 ports detected
    [ 22.616919] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 22.616924] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 22.616926] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 22.616932] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 22.626727] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
    [ 22.626863] hub 4-0:1.0: USB hub found
    [ 22.626866] hub 4-0:1.0: 2 ports detected
    [ 22.626916] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 22.626921] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 22.626923] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 22.626929] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 22.640057] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
    [ 22.640206] hub 5-0:1.0: USB hub found
    [ 22.640209] hub 5-0:1.0: 2 ports detected
    [ 22.640287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 22.640292] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 22.640294] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 22.640301] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 22.653412] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
    [ 22.653525] hub 6-0:1.0: USB hub found
    [ 22.653528] hub 6-0:1.0: 2 ports detected
    [ 22.653580] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 22.653585] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 22.653587] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 22.653592] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 22.663388] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
    [ 22.663483] hub 7-0:1.0: USB hub found
    [ 22.663486] hub 7-0:1.0: 2 ports detected
    [ 22.663537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 22.663542] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 22.663545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 22.663550] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 22.673377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
    [ 22.673517] hub 8-0:1.0: USB hub found
    [ 22.673520] hub 8-0:1.0: 2 ports detected
    [ 22.890030] usb 2-6: new high speed USB device number 2 using ehci_hcd
    [ 23.088194] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
    [ 23.320022] usb 3-2: new full speed USB device number 2 using uhci_hcd
    [ 23.501917] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
    [ 23.519193] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 23.856585] Linux media interface: v0.10
    [ 23.893017] Linux video capture interface: v2.00
    [ 23.913937] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3330)
    [ 23.916866] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input4
    [ 23.916907] usbcore: registered new interface driver uvcvideo
    [ 23.916909] USB Video Class driver (v1.0.0)
    [ 23.936777] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
    [ 23.936831] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input0
    [ 23.941854] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input6
    [ 23.941970] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input1
    [ 23.941986] usbcore: registered new interface driver usbhid
    [ 23.941987] usbhid: USB HID core driver
    [ 24.403677] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 24.564686] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 24.592114] Adding 2104508k swap on /dev/sda2. Priority:-1 extents:1 across:2104508k

  • Reasonably new PIONEER DVD-RW DVR-111D will NOT RECOGNIZE CD's

    I bought a new PIONEER DVR-111D drive to replace my old superdrive about 5-6 months ago.
    All was fine and good until about 2 weeks ago when it was suddenly unable to recognize CD's. Audio CD's, blank CD's, my highly valued "must insert to play" Halo CD, etc...
    I noted this problem originally when trying to burn a playlist on a CD and Toast would pop out an error message about "Wrong Media Type". They worked fine before. This only happens on CD's (and yes, I tried a few different brands) - not DVD's.
    DVD's (Dual Layer & -R & +R) read/write/burn fine.
    But when I put a CD in the tray and close it, out spits out the disc (and I've tried several different types) about 20 seconds later.
    I've tried every option I could find to fix this issue including...
    http://www.macworld.com/forums/ubbthreads/showflat.php?Cat=0&Number=440595&Main= 439419
    (trashing com.apple.kernelcaches, trashing Extensions.kextcache and when those suggestiosn didn't work, trashing ~Home/Library/Preferences/CD Info.cidb - all to no avail)
    I've uninstalled and then reinstalled Patchburn. Didn't work.
    I used Preferential Treatment to fix my User Prefs and System Prefs.
    Doesn't help.
    Now Toast hangs whenever I try and insert a CD while its running - but when I use Toast's "Recorder Settings" to identify the drive it says CD-RW Yes and CD-R Yes.
    I really can't understand why this is happening. Isn't the laser that writes to DVD's the same as the one for CD's? If so, where is this "recognition" issue (can't recognize CD's but has no problem with DVD's) happening?
    Here's the System Info for this drive:
    PIONEER DVD-RW DVR-111D:
    Manufacturer: PIONEER
    Model: PIONEER DVD-RW DVR-111D
    Revision: 1.23
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Vendor Supported
    Removable Media: Yes
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    I'd be very grateful for any help on this issue.
    G4 - Quicksilver   Mac OS X (10.3.9)  

    Hi-
    There are two separate laser/laser lens for each of CD and DVD media. You could have lost the CD side. Could also be a blob of dust in the way.
    Could try cleaning, or, try and get warranty replacement.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

  • The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned

    I am trying to burn an album from iPhoto '09 and I receive the following error message:
    The burn to the PIONEER DVD-RW DVR-K06A drive failed. Verifying the burned data failed.
    I have attempted 3 different times using the same media that worked prior to my upgrade to Snow Leopard. Prior to the upgrade I didn't have any problems.
    Any help would be appreciated.

    Same for me here...no luck with TDK DL DVD +R. Seems that this drive is extremely picky with DL supports (http://discussions.apple.com/thread.jspa?threadID=1181990).

  • Pioneer DVD-RW DVR-K05 superdrive can't erase or burn DVD-RW

    I've noticed lots of users are having issues with their slot-loading superdrives and I'm wondering if anyone's issue matches this one:
    I can successfully read and write: CD-R, CD-RW, DVD-R, DVD-DL and can READ an already burned DVD-RW, but I can't erase a DVD-RW that's already burned nor can I burn a blank DVD-RW. Inserting a blank DVD-RW results in ejecting the disc after about 30 seconds, no error messages, just ejects.
    I've tried Maxell DVD-RW and Memorex DVD-RW. Same results.
    An already burned DVD-RW (from a different burner) mounts fine on the desktop, but when I try to erase using Toast 7, I get the following message:
    The drive reported an error:
    Sense Key = ILLEGAL REQUEST
    Sense Code = 0x30, 0x05
    CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
    It recognizes that it's a DVD-RW, but treats it as though it were a DVD-R.
    Using Disk Utility to erase results in a more generic error message:
    Optical Erase failed with the error:
    Optical Erase Failed
    I had an online chat with an Apple rep who had me reset the PRAM, no change. Then we tried from another account, no change. Their next recommendation was to re-install the OS using Archive and Install, which I have my doubts about doing. Failing that, they recommend bringing the iMac in to a service store to possibly replace the drive. But based on what I've been reading about all the different superdrive problems users are having, I'm reluctant to even do that for fear of having an even worse problem with a different drive crop up at some point.
    Has anyone out there had this exact problem and found a solution yet?
    Seems like a simple firmware update for the drive could fix everything but I'm unable to find one.
    Here's the drive specs from the Apple System Profiler:
    PIONEER DVD-RW  DVR-K05:
    Firmware Revision: Q523
      Interconnect: ATAPI
      Burn Support: Yes (Apple Shipped/Supported)
      Cache: 2000 KB
      Reads DVD: Yes
      CD-Write: -R, -RW
      DVD-Write: -R, -RW, +R, +RW, +R DL
      Burn Underrun Protection CD: Yes
      Burn Underrun Protection DVD: Yes
      Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
      Media: No

    hi there--
    instead of just resetting pram i would try booting to
    open firmware holding apple-option-o-f and then type
    in the following commands--
    reset-nvram (hit return)
    set-defaults (hit return)
    reset-all (hit return)
    the last command restarts the computer. see if that
    works. if it doesn't then try resetting the smu.
    http://docs.info.apple.com/article.html?artnum=301733
    there is a remote possibility that this is software
    related, but it almost never is, and these things
    are much more likely to resolve your problem than
    doing an archive and install, and they are much less
    hassle free. let me know if that works. [ 8 ) ]
    OK, I booted into open firmware and did all the resets. No improvement. In fact, now I can't even mount some DVD-Rs that I had successfully burned before and mounted before. The drive has always been a little touchy with some discs, especially DVDs, but now seems to be even more hit-and-miss. CD-R and CD-RW reliably mount but DVDs have me worried. It took a long time for my OS X install disc to mount and display the window.
    I think it may be time to take it in to Apple and replace it. I may also consider purchasing a Firewire burner with a tray!
    Just wondering also if PatchBurn would fix this by creating a new profile or if this truly is a hardware issue. http://www.patchburn.de/
    Thanks for your help.

  • Need help with Airport Express and so on.

    Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
    My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

    DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
    The AirPort Extreme base station (AEBS) is a router so it will do what you need.
    You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

  • Need help with upgrading my OS from 10.5.8

    Need help with upgrading my OS. I havent upgraded the OS since I bought it and have version 10.5.8. Now I cant download Mountain Lion- or even Snow Leopard. When i downloaded the first version of SL- 10.6.1 it says i have to have 10.6 first and I cant find that.

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple withdrew Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    UPDATE:
    OS 10.6 Snow Leopard is once again available from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

Maybe you are looking for

  • Dragging text from Photoshop into iweb

    Any text I drag from photoshop on to a iweb page is very rough around it's edges and is noisy. Please help. Message was edited by: maashe

  • Submit button image dosen't work...

    Hi! I have a html page with a form (start a servlet) in and it works without problems when I use an <imput type=submit.... if I change this with an image button.... I have an "Internal Server Error" .... Why? whats the difference? Thanks, Calin

  • System status icon

    Hi Experts, I need to disable system status icon: header and item in CRMD_ORDER, for few users, I have no idea how to do this Appreciate your help on this.. Regards Beginner

  • I have a new laptop.I can get my old imported emails but not new emails. where do i go to find them.

    I used to have Outlook on my old laptop. I have a new laptop and have installed Mozilla Thunderbird for my emails. My IT friend put all my emails from my old laptop onto a memory stick and then imported them onto my new laptop with your Mozilla Thund

  • Final Chaining

    Hey, I'm messing about with chaining instance-scoped final variables together with deferred execution; e.g. public final class FinalChain {     private final double a;     private final double b = this.a * 3;     FinalChain(final double a) {