Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long.  In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work.  I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue  I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows  connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment?  Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account.  So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions.  The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results.  I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Similar Messages

  • Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

    Dear All,
    I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
    First I would like to present my network environment, I have 4 physical servers;
    The first one is holding the Domain Controller 1, IP@: 192.168.1.10
    The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
    The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
    And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
    I am doing the steps below:
    1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
    2-entering the account name: [email protected]
    3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
    4-type the exchange CAS Server URL, https://192.168.1.16
    5-Check the "Connect using SSL Only"
    6-Authentication Settings: "NTLM Authentication", and pressing Apply
    7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
    8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
    9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
    username and password in the small window and I still got the same result.
    I cannot verify the account name and I cannot complete the process.
    I appreciate you kind assistance.

    Hi,
    To narrow down the cause, I’d like to recommend the following troubleshooting:
    1. Try to login the test account through OWA.
    2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
    3. Check the result of directly accessing the following URL:
    https://autodiscover.domain.com/autodiscover/autodiscover.xml
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

    Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
    Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
    Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
    is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
    Any help is appreicated!
    Thanks

    Hi,
    From your description, you want to achieve the following goal:
    Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
    Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
    Hope my clarification is helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • OUTLOOK 2013 DISCONNECTED FROM EXCHANGE SERVER

    Outlook 2013 works fine on Laptop that did not participate in the update on Tuesday for Office.  The desktop unfortunately did perform update.  Since that time Outlook cannot connect to the Server.  What happened?

    Hi,
    Do you mean the Outlook in desktop can't connect to Exchange server since installing a update? Does it show "Disconnected" in the bottom-right of the Outlook window after opening Outlook?
    Please make sure your desktop network is well and it is restarted after performing update. Then disable Exchange Cached mode in Outlook and use Outlook online mode to check whether it works well. If everything works fine in Online mode, please
    create a new Outlook profile
    for Cached mode to check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

    I have read a lot of articles and tried a lot of things, but I cannot get outlook to connect to my exchange server. This is a test environment, I have tried making my own certificate and signing it through my own CA to no avail. I have completely disabled
    windows firewall and stopped the service. I can ping between the two just fine by name or IP. I've tried not using cached mode, creating new profiles in outlook etc. I tried setting my CertPrincipalName to my FQDN in exchange powershell.
    I am not an expert with exchange at all, but I feel like this should work with little to no configuration, instead I've wasted days on this. Half of the articles I've read don't seem to have solutions, and the other half have solutions that are not working
    for me.
    I can access OWA and send emails on a client computer through OWA with no problems.
    I am running a test domain on the same network as my current exchange 2003/sbs 2003 active environment, I don't know why this would be an issue, but if it is I cannot figure out why. The only thing I can see holding me back right now is not having a signed
    certificate from digicert etc, and an official internet domain set up, but I don't think either of those things matter in my situation. 
    Any help is greatly appreciated and I'll gladly provide any other information requested to solve this issue, thank you.

    I have a similar setup and also have the same error. Did you find a solution for this?
    In the managed availability - monitoring log I see the following errors:
    EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
    Latency: 00:01:58.0150000
    ActivityContext: 
    Outline: [15] RpcProxy connectivity verification; [117999][FAILED!] EMSMDB.Connect(); 
    Likely root cause: HighLatency
    Details: 
    Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
    Log:     RpcProxy connectivity verification
        Task produced output:
        - TaskStarted = 8/5/2014 7:47:11 AM
        - TaskFinished = 8/5/2014 7:47:11 AM
        - ErrorDetails = 
        - Latency = 00:00:00.0153816
        - RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
        - ResponseStatusCode = OK
        - RequestedRpcProxyAuthenticationTypes = ntlm
        - RespondingHttpServer = BESRVCOTEXCH001
        - RespondingRpcProxyServer = BESRVCOTEXCH001
        - WebHeaderCollection = Persistent-Auth: true
    X-DiagInfo: BESRVCOTEXCH001
    X-BEServer: BESRVCOTEXCH001
    Content-Length: 20
    Content-Type: application/rpc
    Date: Tue, 05 Aug 2014 05:47:11 GMT
    Server: Microsoft-IIS/8.0
    X-Powered-By: ASP.NET
    RpcProxy connectivity verification completed successfully.
        Mailbox logon verification
            EMSMDB.Connect()
            Task produced output:
            - TaskStarted = 8/5/2014 7:47:11 AM
            - TaskFinished = 8/5/2014 7:49:09 AM
            - Exc
    and 
    EMSMDB.Connect() step of OutlookRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
    Latency: 00:01:58.0250000
    ActivityContext: 
    Outline: [13] RpcProxy connectivity verification; [118011][FAILED!] EMSMDB.Connect(); 
    Likely root cause: HighLatency
    Details: 
    Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
    Log:     RpcProxy connectivity verification
        Task produced output:
        - TaskStarted = 8/5/2014 7:23:20 AM
        - TaskFinished = 8/5/2014 7:23:20 AM
        - ErrorDetails = 
        - Latency = 00:00:00.0132417
        - RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
        - ResponseStatusCode = OK
        - RequestedRpcProxyAuthenticationTypes = ntlm
        - RespondingHttpServer = BESRVCOTEXCH001
        - RespondingRpcProxyServer = BESRVCOTEXCH001
        - WebHeaderCollection = Persistent-Auth: true
    X-DiagInfo: BESRVCOTEXCH001
    X-BEServer: BESRVCOTEXCH001
    Content-Length: 20
    Content-Type: application/rpc
    Date: Tue, 05 Aug 2014 05:23:20 GMT
    Server: Microsoft-IIS/8.0
    X-Powered-By: ASP.NET
    RpcProxy connectivity verification completed successfully.
        Mailbox logon verification
            EMSMDB.Connect()
            Task produced output:
            - TaskStarted = 8/5/2014 7:23:20 AM
            - TaskFinished = 8/5/2014 7:25:18 AM
            - Exc

  • Outlook 2013 repeatedly prompts for password when connecting to Exchange Server 2010

    I am trying to configure Outlook 2013 on a Windows 8.1 Pro client.  The exchange server is 2010 SP1 and works just fine with OL 2010.
    When I configure OL 2013, the configuration prompts for a password for the account repeatedly with both NTLM and Basic Authentication chosen.  OL 2013 tries to connect and then it disconnects with the password for the account repeatedly prompted. When
    the credentials are entered, the prompt reappears immediately.
    Might anyone help?
    Many thanks in advance
    Shuvo

    Hi Shuvo,
    Please check whether this user can access mailbox in OWA. Please manual setup this account in Control Panel to have a try. Make sure your
    Server name and User name are configured correctly. If you are configure the account in internal domain environment, please click
    More Settings, set Negotiate Authentication in
    Security tab and uncheck Connect to Microsoft Exchange using HTTP in Connection tab.
    If there is any updates, please feel free to let us know.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Need Help with Outlook 2007

    I am a newbie and need help on how do I set up my Blackberry 8330 Curve to work with the Intenet Explorer & Outlook 2007? Your help wpould be greatly appreciated.

    Hi,
    Email:
    Set up a BIS account (you'll need to contact your provider to ensure that your paying for a BIS service!) 
    Email will arrive to the messages icon. This is a COPY of the ISP emails before they arrive to the Outlook. Or you can use Desktop Redirector and Outlook but you will need to leave your PC running all the time for this to work, so I dont see the point. Just use the BIS instead.
    REMEMBER: Once you download the email to your Outlook, the BB handset cant delete them from the server - the Outlook is not the server - your ISP has the mail server.
    Explorer:
    Blackberry Browser/INternet Browser/WAP portal are different browsers that are available on the handsets. Rememebr that all mobile devices do NOT access the Internet as on your PC! They access a subset of the internet effectively called the Mobile Internet. Web pages need to be specially formatted to be viewed on the small screeened devices and as s cuh cannot be viewed correctluy. Modern webpages cannnot be viewed at all as they run java/javascript/flash programs on the browser to show ads/other efffects on the webpoages and so these will not work on the MBB.
    Dont expect a Full laptop screen on a Tiny Monbile handset. That way you wont be dissapointed when your expectations are dashed(!)
    Your carrier will be able to connect you to  the Blackberrry Web browser service. 
    Hope that helps. 
    Checked out my Blackberry FAQ's and Links to Needed Articles here
    http://darkeen.homelinux.com/index.php/Blackberryfaq

  • Outlook 2013 connection status 'Exchange Directory' disconnected randomly for random users (Exchange 2013)

    We have been encountering an issue where upon random Outlook 2013 users are unable to open the address book, or add a room to a meeting (using 'Add Rooms...' button), and an error message is displayed that the server is unavailable. Mail flow and
    everything else functions normally.
    If I look at the Outlook connection status of an affected user, I will see that all connections are established except for the 'Exchange Directory' connections which show disconnected. If I click the 'Reconnect' button the Exchange Directory connections
    are re-established, and the user can now access the address book/meeting rooms as normal.
    Are there any ideas what I would check, logs I could look at, events or anything I can check on the server side that might lead me to an answer what could cause this?

    Outlook 2013 gets that data from Exchange 2013 by connecting to Exchange Web Services.  That's where you should look.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Need help with thinkvantage access connection

    Here a log file with new access connection:
    Connection status:  Disconnected
    Cause:  Driver disconnected while associating.
    Error code:  229378
    Recommended actions:
    Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
    Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
    If the problem persists, contact your network administrator and provide the troubleshooting information below.
    Adapter Details
    Adapter name  11a/b/g Wireless LAN Mini PCI Express Adapter                  
    Adapter type  Wireless LAN                                                   
    Adapter speed  54.0 Mbps                                                      
    Driver/Firmware version  7.6.0.96/ N/A                                                  
    Adapter status  Enabled                                                        
    Connection Status  Disconnected                                                   
    Disable unused cards?  Yes                                                            
    TCP/IP Settings
    DHCP enabled?  Yes                                                            
    Append parent suffixes of the primary DNS suffix?  Yes                                                            
    Register connection's DNS suffix in registration?  Yes                                                            
    Register connection's DNS suffix in DNS registration?  Yes                                                            
    Enable LMHOSTS Lookup?  No                                                             
    NetBIOS setting  "Default"                                                      
    Wireless Settings
    Network name (SSID)  linksys                                                        
    Connection type  Access point                                                   
    Wireless mode  Auto                                                           
    Security encryption  None                                                           
    System Information
    System model  7732CTO                                                        
    BIOS version  7LETB7WW (2.17 )                                               
    Operating system version  Windows Vista,  Service pack 2                                 
    Access connections version  5.31                                                           
    Access Point scan list
    Network name (SSID)              Wireless mode  MAC address                   Signal strength Channel
    linksys                          802.11g        00:1C:10:54:65:B6              24%            11
    Global Settings
    Network
     Allow all users of this system to switch to any existing location profile  -> No
     Allow the wireless LAN radio to be turned off when inactive  -> No
     Allow selection of location profiles with Fn+F5 On Screen Display menu  -> Yes
     Enable autodeletion of unused profiles  -> Yes
    Notifications
     Show ThinkVantage Access Connections status icon in task tray  -> No
     Show wireless status icon in task tray  -> No
     Display the progress indicator window when a profile is being applied  -> Yes
    Preferences
     Enable sound effects  -> Yes
     Do not show balloon tips from the Access Connections system tray icon  -> Yes
     Show WiMAX page as default on Main GUI  -> No
    Automatic location profile switching list
     Include Ethernet connections in automatic switching and prompt me to save Ethernet ports  -> Yes
     When no other connections are available, connect through Wireless WAN or WiMAX  -> No
    Wireless priority list
    Selection    Priority     Location profile name                                            Connection order                 Connection details             
    No                  1     linksys                                                          Wireless LAN                     SSID: linksys                  
    Log File
    Debug Log is enabled
    It didn't happen when I use old version. Can anybody help me?

    Are you getting any error message while connecting to ds..?
    Are you able to go online on wired computer...?
    Are you able to go online on any wireless computer on your network..?
    Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... 
    Now,check.

  • I can't create an email account in Outlook 2013 for my exchange server

    Have tried many things on this issue.
    I have a new tablet PC running Windows 8. I am able to connect to my Exchange Server account using Windows 8 Mail, no problem but when I have tried to set up an account for Outlook 2013 to connect to the same Exchange Server using exactly the same login
    information I cannot get it to connect. I simply get the message that the Exchange Server is unavailable.
    I've been able to connect a variety of other devices to the same Exchange Server account without any problem - iPhones, Windows Phone, iPads, etc, etc all without problem. It's just this device and Outlook 2013 seems to be the issue. From checking various
    forums seems this is not an isolated issue but I've not been able to find a useful solution so far. Have deleted the user profiles and .ost files, switched off caching etc, all to no avail.
    One key difference between the account information required by Windows Mail and Outlook is that in the Windows Mail system I am prompted to enter my domain information. I know this is critical from the information provided to me by our network administration
    team but there is nowhere in the Outlook account setup process where I can enter my domain info.
    Closest I've been able to get to success is to use the manual account creation process and select the Exchange ActiveSync option - this gets me to the point where I'm prompted for my username and password info but it fails at this step because I am connected
    to a local domain (the domain account for the PC) and my user name and password are not accepted. There is nowhere in this login process that I can find where I can enter the correct domain info.
    Any ideas on a solution would be very much appreciated - I use Outlook extensively in my work and whilst the Windows 8 Mail system is good, it doesn't have the level of functionality I need.
    Many thanks
    Wayne.

    Have managed to solve this with your help Martina regarding using the domain\username combination.
    Here's the solution in detail in case anyone else is having similar problems.
    From control panels - select the User Accounts and Family Safety item, then the Mail (Microsoft Outlook 2013) item and then the Email Accounts option.
    Select the Email tab and click 'New... button to create a new email account
    Choose the standard Email account option in the following form. (Not the 'Manual' option'
    Enter your Exchange account details - no alterations necessary here. just your standard details.
    As the account verification proceeds you are prompted to again enter your username and password details. In this form, instead of using the top option with your username already populated, click the lower 'Other user' option and enter your domain\username
    details. This changes the domain. Enter your password as usual.
    I was prompted to do this twice - same each time. Enter domain\username in the username field and usual password
    Account is then created.
    Open Outlook to complete the process and synchronise data with Exchange.
    Hope this is helpful to others - again, many thanks for your assistance Martina.
    Wayne.

  • Outlook problems connecting to Exchange server

    I am using client version 5.0, PIX 506e and Microsoft IAS to vpn into a corporate network. Once connected some users have problems with their Outlook unable to connect to the Exchange server. Trying to figure out if I need to make a configuration change, or if a Microsoft issue. Thanks.

    The problem could be because of MTU sizing. Reduce the MTU sizing of the tunnel on both ends till the end users do not face any such connectivity problems. Packet reassembly and fragementation are some of the main causes for connectivity loss.

  • OUTLOOK 2013 DISCONNECTS TO EXCHANGE SERVER

    Hello,
    I am a student at The Ohio State University. I configured Outlook 2013 to check my EXCHANGE SERVER. It was successfully configured. However, outlook RANDOMLY disconnects to my EXCHANGE SERVER. I have been experiencing this for a month.
    After I restart my computer, outlook will connect to my email again, but it will still disconnect to my email randomly at another time the day after
    I am using window 8.1
    Outlook 2013 (latest version)
    Best,
    Patrick Nguyen

    Check the connection status of Outlook. To do this, hold down the CTRL key and right-click the Outlook icon in the notification area (system tray) of your computer.
    Select Connection Status.
    See where its trying to connect.
    Report to your Exchange Admin, most case it has to be checked at Exchange Server End, If you opt out network related issue. 

  • Need help with URL Redirect in Sun Web Server 7 u5

    All I am trying to do is redirect to a static URL and for the life of me I can not get it to behave the way I would expect. I am new to Sun Web Server so I am just trying to use the Admin Console to set this up.
    Here is what I'm trying to do:
    Redirect from - http://www.oldsite.com/store/store.html?store_id=2154
    To - http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
    Here's what I tried in the console.
    Added a new URL Redirect
    Set the Source to be Condition and set it to: '^/store_id=2154$' (quotes included)
    Then set the Target to: http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
    Then for the URL Type I checked Fixed URL
    When I tested with: http://www.oldsite.com/store/store.html?store_id=2154 it did redirect as desired
    BUT
    When I tested with: "http://www.oldsite.com/store/store.html?store_id=5555" it too got redirected to the Target and I can't figure out how this second URL can satisfy the condition to get redirected.
    Any help is most appreciated.

    thanks for choosing sun web server 7
    it is simpler if you just edit the configuration files manually
    cd <ws7-install-root>/https-<hostname>/config/
    edit obj.conf or <hostname>-obj.conf (if there is one for you depending on your configuration so that it look something like)
    <Object name="default">
    AuthTrans..
    #add the folllowing line here
    <If defined $query>
    <If $urlhost =~ "/oldsite.com" and
    $uri =~ "/store/store.html" and
    $query =~ "store_id=2154" >
    NameTrans fn="redirect" from="/" http://www.newsite.com/Stores/StoreFront.aspx?StoreId=2154
    </If>
    </If>
    ..rest of the existing obj.conf. continues
    NameTrans...
    now, you can either do <ws7-install-root>/https-<hostname>/bin/reconfig -> to reload your configuration without any server downtime or <ws7-install-root>/https-<hostname>/bin/restart -> to restart the server
    if it did work out for your, you will need to run the following so that admin server is aware of what you just did
    <ws7-install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname.domainname>
    hope this helps

  • I need help with the processes running a media server.

    Hi there!   I need some help with the following log please.  The processes listed I am assuming are the current processes being used from my MacBook Pro to the media server?  Is that correct?  Are these common processes?
    Incident Identifier: EC931B64-E141-4C64-B428-427DF014C7E8
    CrashReporter Key:   b16be41bf16206d8f231e7e71676ab2a9c4dd25e
    Hardware Model:      iPhone4,1
    OS Version:          iPhone OS 5.0.1 (9A405)
    Kernel Version:      Darwin Kernel Version 11.0.0: Tue Nov  1 20:34:16 PDT 2011; root:xnu-1878.4.46~1/RELEASE_ARM_S5L8940X
    Date:                2012-08-24 16:06:18 -0400
    Time since snapshot: 152 ms
    Free pages:        1195
    Wired pages:       88383
    Purgeable pages:   0
    Largest process:   mediaserverd
    Processes
             Name                 UUID                    Count resident pages
                 atc <2271ed33ec773eeb9f381bf1baac9dee>     390
           securityd <e31a714c227a3d1c98ef8aacd44d91ee>     243
             assetsd <281396d3e7d831fbb6a5374157663dbc>    1370
          MobileMail <7064f2baf3f23db987bc8ec99855fe53>    1438 (jettisoned)
            mstreamd <cbe9881735043a389e7cdad3b5bcf5ce>    1099 (jettisoned)
              Camera <88291709452932ac9cbd0f1c06902214>    3105 (active)
         dataaccessd <b4f61f117ee635c48329af8572733d30>    1760
         MobilePhone <fe38c6944a053c9187b41ee50aa151b0>    5549
            networkd <6ee7a78e56073f6e8db4c2cc3265fdb4>     170
          aosnotifyd <58089d732ab43bbea0aec4a6f812f446>     320
            BTServer <e03baab8e0103188979ce54b87591065>     261
          aggregated <68a25a1690cb372096543a46abed14d7>     337
                apsd <e4b6e6e4f31e36f79815747ecbf52907>     291
       fairplayd.N94 <2c0105776e393b39ba95edffaf3bdd17>     294
           fseventsd <78af02202422321885dfc85c24534b0e>     170
                iapd <3ee7f82879033b4fb93b9cf1f4ecae29>     366
             imagent <8e2042f2ec9e3af9ba400f031f1bbfa7>     416
       mDNSResponder <b75f43f012ad3d9ea172d37491994e22>     265
        mediaremoted <b9fa7d1381013c2fa90ea134ff905f59>     258
        mediaserverd <478e5e8345c83be5ba1868906813bb75>    6774
                 ubd <7eaf0b0ca5b83afabecb0dfaa38c7a19>     389
               wifid <e176ab123beb3000bdb89e020612c1d6>     284
           locationd <91c84ab19dd03e4ab1b4cc30178ab1c0>     831
              powerd <25ddef6b52e4385b819e777dd2eeed3c>     167
           lockdownd <a68aa1526ef13a9bb4426bb71ffc1e3c>     250
          CommCenter <51922c9a50e73fe3badccaa4b1b1123b>     781
             syslogd <dd3766bcb1213e91b66283635db09773>     107
         SpringBoard <7506c20d86da3f1dbe9bf38f8bda253d>    5673 (active)
             configd <3430c0025ed13f56800a329b7254d2ae>     418
             notifyd <3793fabace3a385687b3c29c1fa1fcac>     252
      UserEventAgent <6e1cabc1ec6d372c90a6bdeaa7b258fa>     433
             launchd <cc35dd7a872334319ed028e6bbeae081>     133
    **End**
    Thanks a bunch!!!

    COULD NOT OF BEEN BOUGHT BRANDNEW IN 2011** apologies

  • Outlook for Mac and Exchange Server 2010

    I am a customer of Office 365 and I am using it on my Mac. Unfortunately Outlook for Mac (version 15.6 150113) is not able to connect to my Exchange account. Tried to reinstall it many times and also reinstalled from zero the Yosemite OS X, but no way. I
    try to make the automatic connection and it doesn't work, so I manually insert the server address but unfortunately it doesn't happen anything and the bullet on the left signs a yellow color indicating that it is not connected. I use the same information that
    I use in the native "Mail" application where it works perfectly. I tried also other applications like foxmail and airmail 2, and using the same server and id they all work perfectly. Also Lynch is working great. Can somebody help me to solve this
    "outlook for Mac and Exchange" problem?
    Thank you in advance

    Hi Sylvain, Thank you for the attention. Hereafter the result of the test and sorry if it is in italian since my account is italian. I forgot to say that my exchange account is my Company's exchange server while office 365 is my personal account.
    Il test della connettività non è stato superato
    Dettagli del test
    <input class=" __ecpStyleButton" id="testSelectWizard___CustomNav3_buttonStartOver" name="testSelectWizard$__CustomNav3$buttonStartOver"
    style="padding:8px 8px 8px 29px;text-align:left;border-style:none;cursor:pointer;background-image:url(https;background-background-repeat:no-repeat no-repeat;" type="submit" value="Ricomincia" /><input class=" __ecpStyleButton"
    id="testSelectWizard___CustomNav3_buttonRunAgain" name="testSelectWizard$__CustomNav3$buttonRunAgain" style="padding:8px 8px 8px 29px;text-align:left;border-style:none none none solid;cursor:pointer;background-image:url(https;border-left-color:#cccccc;border-left-width:1px;background-background-repeat:no-repeat
    no-repeat;" type="submit" value="Esegui di nuovo il test" />
    <input class=" __ecpStyleButton" id="testSelectWizard_ctl12_btnExpandAll" name="testSelectWizard$ctl12$btnExpandAll" style="padding:8px 8px 8px 29px;text-align:left;border-style:none
    solid none none;cursor:pointer;background-image:url(https;border-right-color:#cccccc;border-right-width:1px;background-background-repeat:no-repeat no-repeat;" type="submit" value="Espandi tutto" /><input class="ecpStyleButtonImageOnly
    __ecpStyleButton" id="testSelectWizard_ctl12_btnSaveXml" name="testSelectWizard$ctl12$btnSaveXml" style="padding-padding-bottom:6px;padding-text-align:left;border-style:none;cursor:pointer;background-image:url(https;background-background-repeat:no-repeat
    no-repeat;" title="Salva come XML" type="submit" value="" /><input class="ecpStyleButtonImageOnly __ecpStyleButton" id="testSelectWizard_ctl12_btnSaveHtml" name="testSelectWizard$ctl12$btnSaveHtml"
    style="padding-padding-bottom:6px;padding-text-align:left;border-style:none;cursor:pointer;background-image:url(https;background-background-repeat:no-repeat no-repeat;" title="Salva come HTML" type="submit" value=""
    />
    Analizzatore connettività di Microsoft sta tentando di testare il servizio di individuazione automatica per [email protected].
    Il test del servizio di individuazione automatica non è stato superato.
    Altri dettagli
    Passi del test
    Sto tentando di contattare il servizio di individuazione automatica con ciascun metodo disponibile.
    Non sono riuscito a contattare il servizio di individuazione automatica con nessun metodo.
    Altri dettagli
    Passi del test
    Sto tentando di testare il possibile URL del servizio di individuazione automatica https://xx.com:443/Autodiscover/Autodiscover.xml
    Il test di questo potenziale URL del servizio di individuazione automatica non è stato superato.
    Altri dettagli
    Passi del test
    Sto tentando di risolvere il nome host xx.com in DNS.
    Sono riuscito a risolvere il nome dell'host.
    Altri dettagli
    Indirizzi IP restituiti: aaa.bbb.aaa.bb
    Tempo trascorso: 376 ms.
    Sto testando la porta TCP 443 sull'host xx.com per controllare che sia aperta e in ascolto.
    La porta specificata è bloccata, non è in ascolto o non produce la risposta prevista.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_tmmArrow">Altre
    info su questo problema e su come risolverlo</label>
    Altri dettagli
    Ho rilevato un errore di rete durante la comunicazione con l'host remoto.
    Tempo trascorso: 21252 ms.
    Sto tentando di testare il possibile URL del servizio di individuazione automatica https://autodiscover.xx.com:443/Autodiscover/Autodiscover.xml
    Il test di questo potenziale URL del servizio di individuazione automatica non è stato superato.
    Altri dettagli
    Passi del test
    Sto tentando di risolvere il nome host autodiscover.xx.com in DNS.
    Sono riuscito a risolvere il nome dell'host.
    Altri dettagli
    Indirizzi IP restituiti: aaa.bbb.aaa.bb
    Tempo trascorso: 368 ms.
    Sto testando la porta TCP 443 sull'host autodiscover.xx.com per controllare che sia aperta e in ascolto.
    La porta è stata aperta correttamente.
    Altri dettagli
    Tempo trascorso: 377 ms.
    Sto testando la validità del certificato SSL.
    Il certificato ha superato tutti i requisiti di convalida.
    Altri dettagli
    Passi del test
    Analizzatore connettività di Microsoft sta tentando di ottenere il certificato SSL dal server remoto autodiscover.xx.com sulla porta 443.
    Analizzatore connettività di Microsoft ha ottenuto il certificato SSL remoto.
    Altri dettagli
    Soggetto del certificato remoto: CN=autodiscover.xx.com, OU=xx, O=xx, L=ll, S=Italy, C=IT, Autorità emittente: CN=xx, DC=xx, DC=xx, DC=com.
    Tempo trascorso: 722 ms.
    Sto convalidando il nome del certificato.
    Ho convalidato il nome del certificato.
    Altri dettagli
    Ho trovato il nome host autodiscover.xx.com nel nome comune dell'oggetto del certificato.
    Tempo trascorso: 0 ms.
    Sto convalidando l'attendibilità dei certificati.
    Il certificato è ritenuto attendibile e tutti i certificati sono presenti nella catena.
    Passi del test
    Analizzatore connettività di Microsoft sta tentando di generare catene di certificati per il certificato CN=autodiscover.xx.com, OU=xx, O=xx, L=ll, S=Italy, C=IT.
    Ho costruito una o più catene di certificati.
    Altri dettagli
    Ho generato 1 catene totali. La catena di qualità massima termina con il certificato radice CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE.
    Tempo trascorso: 33 ms.
    Sto analizzando le catene di certificati per verificare se sono presenti problemi di compatibilità con le versioni di Windows.
    Ho identificato potenziali problemi di compatibilità con alcune versioni di Windows .
    Altri dettagli
    Analizzatore connettività di Microsoft può convalidare la catena di certificati solo usando la funzionalità di aggiornamento dei certificati radice da Windows Update. Il tuo certificato potrebbe non essere attendibile su Windows se la funzionalità di aggiornamento
    dei certificati radice non è abilitata.
    Tempo trascorso: 5 ms.
    Sto testando la data del certificato per verificarne la validità.
    Sono riuscito a convalidare la data. Il certificato non è scaduto.
    Altri dettagli
    Il certificato è valido. NotBefore = 6/24/2014 12:44:45 PM, NotAfter = 6/23/2016 12:44:45 PM
    Tempo trascorso: 0 ms.
    Sto verificando la configurazione IIS per l'autenticazione del certificato client.
    Non ho rilevato l'autenticazione dei certificati client.
    Altri dettagli
    Accetta/Richiedi certificati dei client non è configurata.
    Tempo trascorso: 924 ms.
    Sto tentando di inviare una richiesta POST di individuazione automatica a possibili URL di individuazione automatica.
    Non sono riuscito a ottenere le impostazioni di individuazione automatica durante l'invio della richiesta POST.
    Altri dettagli
    Passi del test
    Analizzatore connettività di Microsoft sta tentando di recuperare una risposta del servizio di individuazione automatica XML dall'URL https://autodiscover.xx.com:443/Autodiscover/Autodiscover.xml per l'utente [email protected].
    Analizzatore connettività di Microsoft non è riuscito a ottenere una risposta XML del servizio di individuazione automatica.
    Altri dettagli
    Ho ricevuto una risposta HTTP 401 Non autorizzato dal server remoto Unknown. In genere questo dipende dall'uso di una password o un nome utente non corretto. Se stai tentando di accedere a un servizio di Office 365, controlla che il valore usato sia il
    tuo nome dell'entità utente (UPN).
    Intestazioni risposte HTTP:
    Connection: Keep-Alive
    Content-Length: 58
    Content-Type: text/html
    Date: Mon, 09 Feb 2015 07:47:30 GMT
    Server: Microsoft-IIS/7.5
    WWW-Authenticate: Negotiate,NTLM,Basic realm="autodiscover.xx.com"
    X-Powered-By: ASP.NET
    Tempo trascorso: 3904 ms.
    Verrà verificato se in DNS è presente un record CNAME di individuazione automatica per il tuo dominio 'xx.com' per Office 365.
    Non è stato possibile convalidare il record CNAME di individuazione automatica in DNS. Se la tua cassetta postale non è presente in Office 365, puoi ignorare questo avviso.
     <label for="testSelectWizard_ctl12_ctl06_ctl00_ctl02_tmmArrow">Altre
    info su questo problema e su come risolverlo</label>
    Altri dettagli
    Non esiste nessun record CNAME di individuazione automatica per il dominio 'xx.com'.
    Tempo trascorso: 173 ms

Maybe you are looking for

  • Sony Z1 Print to video HDV problems

    I researched several post on this topic and still can't get this to work. Here's my situation. I have imported and edited my HDV footage in the HDV easy set up in FCP 5. I now want to record this HDV sequence (in HDV format) back to a Sony Master tap

  • Jdeveloper Rel1 SilentBEAHomeTask -error on installation

    Dear , While installing Jdeveloper Rel 1 in windowsXP SP2 systems in silent mode, using the silent.xml file the below error throws in the log file. It appears like the installation wizard could not set permission for the new BEA home directory. If ma

  • How can I know how much space did i use on my hard drive or hard disk?

    where do i see information about my hard drive or hard disk?

  • ZFS adding device to a pool

    Hello, my raidz pool reuters consists of four 73G devices. Is it valid to add two larger 146G disks to this pool? Will the new size be 340G ? at the moment - ! root@itchy:/ # zpool list NAME      SIZE  ALLOC   FREE    CAP  HEALTH  ALTROOT reuters   2

  • Apple Store Services

    Hi, I recently purchased a gig of RAM to put into my 12" iBook G4 (which'll max out the total possible), and I was wondering if I can get it installed at the local apple store. I know they have the genius bar, and I figured they could do it there...