Need help with output for D5
Hi,
I need some help getting my film in sync to a D5.
The film was shot on MiniDV and edited drop frame (29.97).
What we did first is output on miniDV and dubbed that to a D5 for color correction. Everything was in sync with the timeline. Then my friend color corrected. Since then several shots have been replaced, not effecting the timing at all. We checked that everything was hitting at the same timecodes and everything was cool.
Now I've output another tape onto MiniDV and tried to dub it to D5 but the shots are not hitting at the same timecode. They assure me that everything is drop frame on their end. Not sure what might be causing the problem. Not sure what to try next?
Need suggestions and ideas.
thanks.
if you had a downconvert from your "color corrected d5" you could place it in the timeline and see whats up.
Similar Messages
-
Subquery results need help with output
Requirements:
There is request to dump every days data from one table into text file.
Tables:INSPECTION_RESULTS
NJAS
Primary Key: RES_SYS_NO
Parent table: INSPECTION_RESULTS
Child table: NJAS
Purpose:
1. obtain output results for the MIN and MAX RES_SYS_NO from INSPECTION_RESULTS table for yesterdays date.
2. Create comma delimited file for following columns using above table data output.
Script thus far:
SELECT NJA_RES_SYS_NO||','||NJA_TEST_REC_NO||','||NJA_LIC_ST_ID||','||NJA_ETS_ID||','||NJA_SW_VER||','||NJA_TECH_ID||','||NJA_VIN||','||NJA_LIC_NO||','
||NJA_LIC_JUR||','||NJA_LIC_SRC||','||NJA_MODEL_YR||','||NJA_MAKE||','||NJA_MODEL||','||NJA_VHCL_TYPE||','||NJA_BODY_STYLE||','||NJA_CERT_CLASS||','||
NJA_GVWR||','||NJA_ASM_ETW||','||NJA_ETW_SRC||','||NJA_NO_OF_CYL||','||NJA_ENG_SIZE||','||NJA_TRANS_TYPE||','||NJA_DUAL_EXH||','||NJA_FUEL_CD||','
|| NJA_VID_SYS_NO||','|| NJA_VRT_REC_NO||','|| NJA_ARMSTDS_REC_NO||','|| NJA_RSN_F_N_TESTABLE||','|| NJA_DYNO_TESTABLE||','||
NJA_CURR_ODO_RDNG||','|| NJA_PREV_ODO_RDNG||','|| NJA_PREV_TEST_DT||','|| NJA_TEST_TYPE||','||
NJA_TEST_START_DT||','|| NJA_TEST_END_TIME||','|| NJA_EMISS_TEST_TYPE||','|| NJA_TEST_SEQ_NO||','
||NJA_LOW_MILE_EXEMP||','||NJA_TIRE_DRY||','|| NJA_REL_HUMID||','|| NJA_AMB_TEMP||','||NJA_BAR_PRESS||','|| NJA_HCF||','||
NJA_GAS_CAP_ADAP_AVL||','|| NJA_GAS_CAP_REPL||','|| NJA_OVERALL_GAS_CAP_RES
FROM NJAS
WHERE NJA_RES_SYS_NO IN (SELECT MIN(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS WHERE NJA_RES_SYS_NO IN
(SELECT MAX(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS, (SELECT SYSDATE-1 FROM DUAL))
It works but not sure if I am getting accurate results. Can anyone help me fine tune this subquery script? Thanks!
ScottDuplicate post
See my answer in your other posting here Re: need help with script -
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Need Help With Download For Airport Express
Ok, computer dummy here needing help with airport express. We were given airport express last night from a friend who recently purchased a newer gadget. He told us we would need to come here to download the operating system. I see lots of links to updates but no links for someone like me who has never had anything like this on my computer before. Does anyone know what link I would need to use? We have a pc with windows XP. Thanks so much for your help!
Hello jesschambers. Welcome to the Apple Discussions!
The AirPort Express Base Station (AX) doesn't have an "operating system" per se, but it does have built-in firmware which pretty much is the same thing. In addition, in order to administer the AX, you will need the AirPort Admin Utility for your Windows PC.
Here are the links for the latest versions of both:
o AirPort Express Firmware Update 6.3 for Windows
o AirPort 4.2 for Windows -
Need help with pagination for book
I am working on a book and need help with the pagination. I was able to make the TOC and front matter show the numbers as Roman numerals, and the body of the text as Arabic numerals, but I can't figure out how to restart the numbering sequence for the body of the text. So the front matter is numbered i-xvi, and the text is 17-681. I need the text to start with the number 1. Each subsequent chapter is a section break as well, if that makes a difference.
Many thanks,
JClick on the page that shall start on number one. Open Inspector palette > Layout inspector (2nd tab) >
Section > Start at: > 1 -
Need help with coding for HTML5 Video with Flash fallback
Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?
The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
Change the 1st line in your .html file from:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to:
<!DOCTYPE html>
Then see if your HTML5 video types load with <video> tag. -
Need help with assignment for class. its for my high school project :(
i really need help, my problem is that with my code i cannot get the "previous", "done" and "next" buttons to work.they cannot seem to find the items from each other. so could someone look at those buttons in the code and tell me how to fix please? the code is as follows:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
/**JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
Box box = Box.createVerticalBox();
String output = "test";
String outputTwo = output;
textOutput = new JTextArea(outputTwo,10,30);
box.add(new JScrollPane(textOutput));
textOutput.setEditable(false);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
/**class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (i <= 0){
i = 0;
}else if(i > 0){
i = i-1;
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
output = "Results \n";
output+= studentName[i]+" Assignment Average = "+averageO[i]+" Exam Average = "+averageT[i]+" Overall average = ";
output+= tAverage[i]+" Letter Grade = "+letterGrade;
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String [] studentName = new String [40];
double [] assignOne = new double [40];
double [] assignTwo = new double [40];
double [] assignThree = new double [40];
double [] gradeOne = new double [40];
double [] gradeTwo = new double [40];
double [] averageO = new double [40];
double [] averageT = new double [40];
double [] tAverage = new double [40];
char [] letterGrade = new char [40];
double max = 0;
double min = 100;
int i = 0;
while(i < studentName.length){
studentName[i] = studentsName.getText();
studentsName.setText(studentName[i]);
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(assignOne[i]);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo = Double.parseDouble(gTwo);
examTwo.setText(gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= gradeA){
letterGrade[i] = 'A';
}else if(tAverage[i] >= gradeB){
letterGrade[i] = 'B';
}else if(tAverage[i] >= gradeC){
letterGrade[i] = 'C';
}else if(tAverage[i] >= gradeD){
letterGrade[i] = 'D';
}else if(tAverage[i] <= gradeE){
letterGrade[i] = 'E';
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);i have to apologize to jittei for the misunderstand i do not know which defination of terms is for which line of code but i know what they do, to solve the problem i have actually made another class in the workspace file called students and now all the bottons work, all i have to do now is properly arrange and put in some additional lines of code and it will be completed. teacher gave me the idea of putting in a new class to help in calling codes from other subclasses in the main program. ah well guess non of you could think of that thanks for the help-ish and hope yall will atleast try to be nice to new people that come in the room. the new coding is:
of course all the commented out lines are not being used in the program anymore but just there till i have the program working with everything in it runs and performs the actions required now though ^_^
*Group CAPE Computer Science 2007/8
*GradeCalculator.java
*@author Carlson Smith
*@version 3.01 07/02/2008
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
private JPanel buttonJPanelTwo;
private Student [] students = new Student[40];
private int current = 0;
private String output;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
for (int i=0;i<40;i++){
students[i] = new Student("");
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
buttonJPanelTwo = new JPanel();
buttonJPanelTwo.setLayout(new GridLayout(1,3));
JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
buttonJPanelTwo.add(previous);
buttonJPanelTwo.add(done);
buttonJPanelTwo.add(next);
content.add(buttonJPanelTwo, BorderLayout.EAST);
Box box = Box.createVerticalBox();
//String outputTwo = output;
//textOutput.setText(output);
textOutput = new JTextArea(output,10,30);
box.add(new JScrollPane(textOutput));
//textOutput.setEditable(true);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
currentStudent = students[current];
if (current <= 0){
current = 0;
}else if(current > 0){
current = current-1;
refresh();
System.out.println(current);
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
//output = "Result \n";
output = currentStudent.getStudentName()+". Assignment Average = "+currentStudent.getAverage()+". Exam Average = "+currentStudent.getExamAverage()+". Overall average = ";
output+= currentStudent.getTotalAverage()/**+" Letter Grade = "+letterGrade[current]*/;
textOutput.setText(output);
System.out.println(output);
currentStudent = students[current];
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
// String [] studentName = new String [40];
// double [] assignOne = new double [40];
// double [] assignTwo = new double [40];
// double [] assignThree = new double [40];
// double [] gradeOne = new double [40];
// double [] gradeTwo = new double [40];
// double [] averageO = new double [40];
// double [] averageT = new double [40];
// double [] tAverage = new double [40];
// char [] letterGrade = new char [40];
//double max = 0;
//double min = 100;
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
// currentStudent = students[current];
current++;
refresh();
/** while(i < studentName.length){
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(" "+assignOne);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(" "+assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(" "+assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(" "+gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo[i] = Double.parseDouble(gTwo);
examTwo.setText(" "+gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= Double.parseDouble(gradeA.getText())){
letterGrade[i] = 'A';
}else if(tAverage[i] >= Double.parseDouble(gradeB.getText())){
letterGrade[i] = 'B';
}else if(tAverage[i] >= Double.parseDouble(gradeC.getText())){
letterGrade[i] = 'C';
}else if(tAverage[i] >= Double.parseDouble(gradeD.getText())){
letterGrade[i] = 'D';
}else if(tAverage[i] <= Double.parseDouble(gradeE.getText())){
letterGrade[i] = 'E';
public void refresh(){
Student currentStudent = students[current];
studentsName.setText(currentStudent.getStudentName());
assignmentOne.setText(currentStudent.getAssignOne()+"");
assignmentTwo.setText(currentStudent.getAssignTwo()+"");
assignmentThree.setText(currentStudent.getAssignThree()+"");
examOne.setText(currentStudent.getExamOneGrade()+"");
examTwo.setText(currentStudent.getExamTwoGrade()+"");
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);
Second class implemented./**
*Group CAPE Computer Science 2007/8
*Student.java
*@author Carlson Smith
*@version 3.01 07/02/2008
public class Student {
private String studentName;
private double assignOne;
private double assignTwo;
private double assignThree;
private double examOneGrade;
private double examTwoGrade;
public Student(String sName){
studentName = sName;
public String getStudentName(){
return studentName;
public double getAssignOne(){
return assignOne;
public double getAssignTwo(){
return assignTwo;
public double getAssignThree(){
return assignThree;
public double getExamOneGrade(){
return examOneGrade;
public double getExamTwoGrade(){
return examTwoGrade;
public void setStudentName(String sName){
studentName = sName;
public void setAssignOne(double assignOne){
this.assignOne = assignOne;
public void setAssignTwo(double assignTwo){
this.assignTwo = assignTwo;
public void setAssignThree(double assignThree){
this.assignThree = assignThree;
public void setExamOneGrade(double examOneGrade){
this.examOneGrade = examOneGrade;
public void setExamTwoGrade(double examTwoGrade){
this.examTwoGrade = examTwoGrade;
public double getAverage(){
return (assignOne + assignTwo + assignThree)/3;
public double getExamAverage(){
return (examOneGrade + examTwoGrade)/2;
public double getTotalAverage(){
return (getAverage() + getExamAverage())/2;
this thread can be closed now. l8rz :P
Edited by: Jacal on Feb 10, 2008 7:28 AM -
Need help with a For loop that uses a Break statement
I need to create a for loop which counts down from 100-50 and divides the number being counted down by a counter. Can anyone help me?
public class Break
public static void main ( String args []) (;
int total = 0
int counter = 0
for { (int number = 100; total >=50; total --)
if (counter == 0)
break;
} // end of for loop
int output = number/counter
system.out.printf("The number is" %d output/n)
}// end of method main
}// end of class BreakIm sorry I didnt explain myself very well i do not need the break statement at all.
I now have this code:
public class BreakTest
public static void main( String args[] )
int count; // control variable also used after loop terminates
for (int i = 100; i >= 50; i = ++count)
if (i >= 50) {
continue;
System.out.printf( "\nBroke out of loop at count = %d\n", count );
} // end main
} // end class BreakTest
/code]
and i get these error messages:
F:\csc148>javac BreakTest.java
BreakTest.java:9: variable count might not have been initialized
for (int i = 100; i >= 50; i = ++count)
^
BreakTest.java:15: variable count might not have been initialized
System.out.printf( "\nBroke out of loop at count = %d\n", count );
^
2 errors -
Need help with LikeFilter for querying the keyset instead of value
Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM -
I need help with searching for an image inside another image
I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
Winner takes all. First person to solve this gets 10 dukes.
Please help.Hi,
I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article. -
Need help with 'Output Folder URL'
How can I compile my application and have it get posted on a
server?
When I create a project, in the “Flex Build Path”
I add my server URL in the 'Output Folder URL' field. But when I
Run my project, it doesn't even seem to attempt to push any files
to the server. It just brings up my browser with the path to it,
which it obviously gets a 404 error. And its going to need a
username and password to post files to a server. Where would I
assign theses value to Flex Builder?After I installed Apache Ant and tinkered with it for about 5
hours, I have what initially wanted. The code below will compile,
copy and launch. I also made a splash logo that appears when its
building. Ant is a nice utility for automated development.
Ref:
http://blog.jodybrewster.net/2008/04/09/installing-ant-in-flex-builder-3/
http://ant.apache.org/manual/tasksoverview.html
<project name="buildXIFF" default="main">
<property name="compiler" value="C:\Program
Files\Adobe\Flex Builder 3\sdks\3.2.0\bin\mxmlc.exe"/>
<property name="firefox" location="C:\Program
Files\Mozilla Firefox\firefox.exe"/>
<property name="projectURL" value="
http://vmwinserver2003/flex/tests/XIFF/XIFF.html"/>
<property name="baseDirectory"
value="Z:\Documents\Programming\Flex\Tests\XIFF"/>
<property name="baseServerDirectory"
value="Y:\flex\tests\XIFF"/>
<target name="main">
<splash
imageurl="file:${baseDirectory}/build/FxAntBuildLogo.png"
showduration="2000"/>
<antcall target="compile" />
<antcall target="copy" />
<antcall target="launch" />
</target>
<target name="compile" description="Build XIFF
project">
<echo>Building files in bin directory in
repository</echo>
<exec executable="${compiler}">
<arg line="-file-specs '${baseDirectory}/src/XIFF.mxml'
"/>
<arg line="-output= '${baseDirectory}/bin-debug/' "/>
</exec>
</target>
<target name="copy" description="Copy XIFF bin directory
to server">
<echo>Copying bin directory from repository to server.
Overwriting all files in destination directory.</echo>
<copy todir="${baseServerDirectory}" overwrite="true">
<fileset dir="${baseDirectory}/bin-debug/"/>
</copy>
</target>
<target name="launch">
<echo>Launching browser, URL is the project's html
page on the server.</echo>
<exec executable="${firefox}" spawn="true">
<arg value="${projectURL}"/>
</exec>
</target>
</project> -
I need help with my for loop in this array
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
public static void main (String[] args)
String timeStr;
int time, again, optiStr;
Inbound[] in = new Inbound[25];
in[0]=new Inbound ("",0,"On Time num0");
in[1]=new Inbound ("",2,"On Time num1");
in[2]=new Inbound ("",3,"Delayed num2");
in[3]=new Inbound ("",4,"On Time");
in[4]=new Inbound ("",5,"On Time");
in[5]=new Inbound ("",6,"Canceled");
in[6]=new Inbound ("",1,"Canceled num6");
in[7]=new Inbound ("",8,"On Time");
in[8]=new Inbound ("",9,"Delayed");
in[9]=new Inbound ("",10,"On Time");
in[10]=new Inbound ("",11,"Delayed");
in[11]=new Inbound ("",12,"On Time");
in[12]=new Inbound ("",13,"Delayed");
in[13]=new Inbound ("",14,"On Time");
in[14]=new Inbound ("",15,"On Time");
in[15]=new Inbound ("",16,"On Time");
in[16]=new Inbound ("",17,"Canceled");
in[17]=new Inbound ("",18,"On Time");
in[18]=new Inbound ("",19,"On Time");
in[19]=new Inbound ("",20,"Canceled");
in[20]=new Inbound ("",21,"On Time");
in[21]=new Inbound ("",22,"Delayed");
in[22]=new Inbound ("",23,"On Time");
in[23]=new Inbound ("",24,"Cancled");
in[24]=new Inbound ("",7,"On Time num24");
do{
timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
time = Integer.parseInt(timeStr);
if (time<=0 || time>24)
JOptionPane.showMessageDialog (null, "Error");
optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
// else JOptionPane.showMessageDialog (null, "else");
}//temp return else if failed to find time asked for
// else
// if (optiStr==JOptionPane.CANCEL_OPTION)
// JOptionPane.showMessageDialog(null,"Canceled");
// else
// {Outbound.run();
// JOptionPane.showMessageDialog (null, "outbound");}//temp
again=JOptionPane.showConfirmDialog(null, "Try again?");
while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM -
Need Help with spry for uploading to a website
Sorry if there is already a thread about this but i cant seem to get this to work. So I have looked around an dfound that you need to have the spry files uploaded to the server and i have done that, but the page still looks wrong. Here is a link so you guys can see what it looks like and i'm sorry about the page being in norwegian.
http://miljopose.net/kjop.html
I really need help because this is for a project i am doing at school.None of these files can be found
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationConfirm.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationConfirm.css" rel="stylesheet" type="text/css" />
Please upload the files in the correct directory
Gramps -
Need Help with Javascript for Acrobat Pro 9
Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio. -
Need help with driver for Canon Selphy CP810 osx 10.8.3
I need help to get my Canon Selphy CP810 running .
Could not find a driver that works on the WEB.Here's a driver from Canon for 10.8.x.
Clinton
Maybe you are looking for
-
Hi We are using ACH - CCD format and for Line 6, we need the foll input: Individual identification number: Company's identification number for the receiving company. When I checked it, this is stored in DTAUSCCD7 - CCD7 - Identification Number Where
-
SAP SRM 7.0 SP upgrade issue- unable to create SC
Hi All, We are facing an issue in creating the SC after the support pack upgrade to SRM 7.0 SP12. When we create the shopping cart the system is unable to determine the source of supply for the shopping carts. We have the classic scenario with backen
-
Exploring the possibility of running a BW query through Web Dynpro
Hi, I would like to extract data from BW query and its output of should populate into the selection screen which is developed in Web Dynpro. Can anyone please help me out ..... Regards Padma N
-
Can i call Reports.rdf files directly through oracle portal
Hello I have already developed 10 oracle reports and i need to put them on portal page ...how can i call those .rdf files in my portal page..is it possible and how... can anybody help me .. it is very urgent.... thanks in advance vipin null
-
Problem installing Cisco AnyConnect Secure Mobility Client
Hello, When attempting to install the Cisco AnyConnect Secure Mobility Client, I get the following message: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support p