Need help with saving Premiere files to work with any update

Hey everybody,
I've been editing with Premiere for a while now and I haven't really had too many issues until now. I live on campus at school and they just opened up a new Library with extensive Mac Pro editing stations, some with 4K monitors! The problem is that the school is not updating the software. So I am running the latest version on my Macbook Pro, but when I try and open the files on the library computers, it tells me something like, "Cannot open file because file was saved on a newer version." Now I know it seems obvious that I should just stick to my computer, but it's nice having a much faster editing station with 27"+ screens. Because the library is so new, they are having trouble keeping up with all the updates and they don't seem to plan on updating them except every semester. So, are there any workarounds? Can I save my files as a more multi-platform file?

I would take your computer back to the earlier version the college uses, there are workarounds to go back versions but they are not perfect.

Similar Messages

Need help with understanding updates, partitions, firmware etc.

I went to update my QuickTime and in doing so was told to update my OS which included QT updates. Now I'm getting all kinds of messages about partitions, firmware etc. do not understand at all what's going on.

THIS IS MY STEP BY STEP situation with my updates:
I go to the Apple Icon and selected Software Update and it reads I have 2 items:
MacBook EFI Firmware Update 1.2
MacBook SMC Firmware Update 1.4
I select Install and then it state Installs completed successfully.
BUT THEN I recieve and new icon and this message below:
To update the SMC firmware on your MacBook:
Your computer's power cord must be connected and plugged into a working power source, or your battery must be at least 25% charged.
For more information see 'http://support.apple.com/kb/TS3499'.
1. Quit all other open applications.
2. Click Restart in the MacBook SMC Firmware Update window and wait for your computer to restart.
The SMC firmware update starts automatically. A status bar indicates the progress of the update. During the update your computer fans will run at full speed, but will return to normal once the update completes.
Important: Do not interrupt the update.
Your computer restarts automatically when the update is completed and opens the MacBook SMC Firmware Update.
3. Click OK. The SMC firmware is now up-to-date.
If these instructions appear on your screen again, the SMC firmware update was not successful. Repeat steps 2 and 3.
I follow the instructions and then I get this: (could get my image to attach but here's what it said)
the first error message heading of:
MacBook SMC Firmware Update 1.4
Your firmware could not be updated, the hard drive partition scheme may not be supported. You must be booted from a GUID partition or RAID scheme.
see http://support.apple.com/kb/HT2434 for more information (internal error 28:3)
THEN ANOTHER ONE POPS UP saying:
Your Hard Drive partition scheme is not supported, you must be booted from a GUID partition scheme.
see http://docs.info.apple.com/article.html? artnum=303609 for more information
I went to those URL and tried to understand what it was telling me but I did not understand. I can't figure, by reading thru forums, etc, if I need to do this or not and what exactly it is.
So back to just pushing a simplet update has thrown all this unknown info. my way and I have no clue what to do.
Thank you. Hope this is more clear.

I need help with application updates

My problem is with applications updateing i changed my e-mail address but my old one still is listed and i can't update new applications how can i change that ID

no iam refering to the application icon shows six updates and i touch it and it shows my old e-mail address which is [email protected]

NEED HELP OPENING SAVED ADOBE FILE

I had some important info saved on a disc (an adobe reader file). I hadn't tried opening it in a while but when I try opening it it says something about a file i/o error. Is there a solution or is the info lost? I don't know if it has anything to do with the different laptops because I remember being able to view it on my old laptop. Please help!

petey*ray wrote:
I TRIED TO SAVE IT TO THE HARD DRIVE AND OPEN IT BUT IT WOULD NOT EVEN SAVE IT. THERE WAS ANOTHER ERROR MESSAGE. BUT THANK YOU SO MUCH. WHAT CAUSES A CORRUPT FILE?
If you couldn't save it to your drive then it's probably a corrupt disk rather than a corrupt file.
As far as causes for corrupt files, there can be many causes. The disk could be corrupt because it wasn't formatted correctly (and your OS won't read it), it could be scratched, just a plain old bad disk (I test all of mine before sending them to anyone)...etc. Again, many reasons it could be bad.
Unfortunately, it sounds like you won't be able to save your file.

Help! I have a Used Mac Book Pro need help with apps update

My ex bought me a mac book pro and purchased all of the apps and uploaded the apps under is apple id. I just recently update the new software now i can't get access to iPhoto, and other apps because its asking me for my password but his apple id coming up is there any way i re install these apps under my apple id. Please help I can used iPhoto.

You cannot use or upgrade anything that is registered with his Apple ID. You must re-purchase it all using your Apple ID and your iTunes account. This includes the operating system as well. Essentially, you erase the drive and start from scratch. Here's how to get started:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. You can decide which apps you want to purchase (or download free) from the App Store where you will set up your own account and your own Apple ID if you don't have one.

Need help with package update

have a package that was sequenced for w7 64 bit;
now need to publish this package to RDS 2012.
edited the package in sequencer and added RDS2012 R2.
The question:
do I have to unpublish current package that is for W7 only and publish edited one with added RDS 2012 or can I update running with changed. Never did update yet. So please don't be angry :)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

If you just changed the supported OS value (checkbox during sequencing), just saving the package on the sequencer and importing it into the management console should be fine.
The MgtConsole will determine that you are importing an updated version and will ask you if you want to import it 'as an update'. You can confirm that.
On a client machine, the old version of the package will remain (for a while) and the new version will be added. Users that actively work with the old version, stick on that on. Users that launch the application will get the new version.
If your two 'packages' really have technical differnces, the 'save as new package' is appropriate with the considerations mentioned earlier
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Need help with Spotify updates!

Recently, Spotify hasn't worked properly. You see, whenever I start Spotify I get a noticfication that says that the latest version of Spotify is available and I can download it just by restarting Spotify. But if i restart Spotify, it doesn't start. It just turns of automatically and then I am not able to open Spotify in anyway I can think of. So then i have to reinstall Spotify, and when I do that Spotify works correctly but i still get the same notification as earlier. So that means that when I reinstall Spotfiy I don't get the latest version which is weird because in the help section on Spotify.com it says that if I reinstall Spotify I get the latest version. If I choose not to update Spotify, the next time I start my computer or turn off Spotify I'm not able to start Spotify and I need to reinstall Spotify again and the same problem starts from the beginning. I had the same problem eariler and got help and solved this issue but now I'm experiencing the same thing again. I keep having this issue every time there is a new update on Spotify! Please help me, I don't know what to do! Ps: I have Windows

Since you mention ActiveX I can assume that you are on Windows.
Download the Reader Update from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5637
For Flash Player you need to download and run the full installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Need help with cs5 updates

I upgraded to CS5 recently. I started getting no
tices there were updates available. When I got to the update
page and clicked on update, I got a message that said 'another
instance of updater is running, please try again later". This has
happened each time I tried to run the updates. It has been going
on for days. I am at a loss as to what this means and how I go about
getting the updates. Any suggestions? I am not a computer or photoshop
whiz, so I need basic help.

That did it - thanks for your help
Jim R

Need help with iPod updater

I recently downloaded the iPod updater for my iPod Nano, but everytime i try to open it, it doesnt come up. I tried downloading the iPod updater a second time, but still the same results. I click on it, and the little hour glass shows up as if its about to open but then it just goes away and the app doesnt open. If someone can help me with this problem it would be greatly appreciated.

Just out of curiosity, did you download the correct version of the updater - i.e., the Windows version versus the Mac version? Just had to ask.
Dennis

Need help with OS Update

So I'll cut it short. Downloaded a new OS. I installed a new OS. Wiped my OS. Deleted Vendor.xml Launched Loader.exe Went through the proccesses. The only problem is its just sitting doing nothing. I dont know if it is. But it looks as if its stuck on 'Connecting to Boot ROM' Its not doing anything. Its been 10-15mins already. Please help

Hmmm...here are some more things to try...I hope you already have a good backup, if not, consider this thread:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Backup-the-data-on-your-Blac...
After that, these may be useful:
Sometimes, it just takes a long time...how long is "long enough" is a tough guess, though...I've heard of folks (extreme cases) waiting as long as 24 hours
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
www.bbsak.org
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help with the update queries - joining three tables -

We have three tables shown below, each with millions of rows;
And need some updates in here;
T_CHECK->TOTAL_AMT_PAID should be equal to
aim00.t_chck_clm_xref->amt_paid + aim01.t_chck_clm_xref->amt_paid;
Some CHECK_SAK values exist in aim00.t_chck_clm_xref and some exist in aim01.t_chck_clm_xref;
We tried to update using the queries within PL/SQL shown below:
Is there a way to make these more effecient?
SQL> desc aim.t_check;
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
TOTAL_AMT_PAID NOT NULL NUMBER(11,2)
DTE_ISSUE NOT NULL NUMBER(8)
SQL> desc aim00.t_chck_clm_xref
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
AMT_PAID NOT NULL NUMBER(10,2)
SQL> desc aim01.t_chck_clm_xref
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
AMT_PAID NOT NULL NUMBER(10,2)
create or replace PROCEDURE CHECKSUPDATE IS
cursor my_cursor is
select /*+ DRIVING_SITE(t_check) INDEX(t_check) */
tot, mid, aim.t_check.total_amt_paid from
(select sum(aim01.t_chck_clm_xref.amt_paid) tot,
aim01.t_chck_clm_xref.check_sak mid from aim01.t_chck_clm_xref
where
not exists (select 'x' from aim00.t_chck_clm_xref
where aim01.t_chck_clm_xref.check_sak = aim00.t_chck_clm_xref.check_sak
group by aim01.t_chck_clm_xref.check_sak) TABLE1, aim.t_check
where aim.t_check.check_sak = table1.mid
and aim.t_check.total_amt_paid <> tot;
my_count NUMBER;
BEGIN
my_count:=0;
for my_pos in my_cursor loop
update aim.t_check a set total_amt_paid=my_pos.tot
where a.check_sak=my_pos.mid;
my_count:=my_count+1;
if (mod(my_count,1000)=0) THEN
commit;
end if;
end loop;
commit;
END CHECKSUPDATE;

>
SQL> desc t_check;
Name Null? Type
CHECK_SAK NUMBER(9)
TOTAL_AMT_PAID NUMBER(11,2)
DTE_ISSUE NUMBER(8)
SQL> desc t_chck_clm_xref
Name Null? Type
CHECK_SAK NUMBER(9)
AMT_PAID NUMBER(10,2)
SQL> desc t_test
Name Null? Type
CHECK_SAK NUMBER(9)
AMT_PAID NUMBER(10,2)
select check_sak, sum(amt_paid)
from (
select check_sak, amt_paid from t_chck_clm_xref
union all
select check_sak, amt_paid from t_test
group by check_sak;and use this query in an UPDATE statement or a MERGE statement, as Tubby suggested, against the T_CHECK table.
isotope

Need help with flashplayer update

I tried to download flashplayer. Told to close all kinds of things. The one I cannot identify is gplayer.

VL Albertson wrote:
I have absolutely no idea what gplayer is.
It is something you have installed on your system, and it obviously uses Flash Player. That's why it needs to be closed in order to install the update.
Check with the Taks Manager's Processes tab.

Portege Z835 - need help with BIOS update

Hello.
I have a Portege Z835, with a battery problem: don't charge. The battery indicator says "3% connected and charging" but it don't charging the battery.
Some forums says that the solution is updating the Bios. I have a Bios update v.1.60 ready for install. When I try to install, we get the message "the battery power is not enough".
My power cord is always connected. If I disconnect the power cord, laptop is off.
Please, what can I do?
Thanks.
GB.

Hi
Theoretically this issue could be related to faulty battery.
As mentioned by Silas, even if the notebook is not ON the battery should be charged if AC adaptor is connected. So Im afraid its not BIOS issue and update would not help you.
You can try this: If notebook is OFF, remove the battery.
Now connect the AC adaptor and power up the unit now the OS should not report any battery statues since the battery is not plugged in.
Now connect the battery and check if the battery charging status would change/increase.
If this does nothing, would recommend testing new battery.

Need help with manually updating!

I have just changed my iPod to "manually manage..." and since doing that i have not been able to add any new songs to it, how do I actually add them manually then? Because if you press the "Update iPod" option in the File menu for automatically update, what do you do to put them on manually?

You're welcome, I'm glad that has solved your problem. If you are just starting out then I'd advise having a look at the various tutorials, good luck:
iPod 101
iPod Higher Learning
iPod FAQ
iTunes for Windows hot tips

Need help with saving Premiere files to work with any update

Similar Messages

Maybe you are looking for