Need help with Zen Micro and Win

Hi,
I bought a Zen Micro 2 days ago and I can't get it to work with my Win XP machine.
I did what was told in the manual: install the software first then plug the player.
When I plug the player in I get the following message:
Found New Hardware:
Zen Micro
According to the manual, it should be detected and the drivers installed automatically.
But it dosen't. Instead I get the Wizard that try to find the drivers and it dosen't find them.
I let the battery get a full charge and I tried again. Same results.
I tried to update the firmware but since the player is not detected that didn't work.
I also tried to get the new MediaSource/Zen driver (ZENM_PCAPP_LB_4_00_8_PDE.exe) but that didn't fix my problem either.
I also tried to install the Creative Zen Micro Driver version .27.02 but it tell me that I can't install it because the user I tried to install it with is not an administrator. But this is not true since there is only one user on this machine and it's the administrator. First software that tell me this.
I'm using XP Home with SP2.
Thanks for the help.

SSR wrote:
The reason it won't install is because the drivers aren't installed.
I've seen a very few others with this strange error about administrati've pri'veleges, so I'm wondering if it's a Windows issue here. You could try downloading the drivers from to see if this is any different.
Try creating another administrator account and see if it will install from that, and try searching back (perhaps someone had found a solution). I think there's also a way of running a program with forced pri'veleges, perhaps Google can turn something up on that.
I remember one user needs to change some rights of the registry in order to install the software. It looks like under some cases, the login account does not have sufficient rights to write registry.

Similar Messages

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Need help with Zen Micro Photo: It stays in recovery m

Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

Need help with Blog, Wiki and Gallery

Hi Team,
Need help with Blog, Wiki and Gallery startup. I have newly started visiting forums and quite interested to contribute towards these areas also.
Please help.
Thanks,
Santosh Singh
Santosh Singh

Hello Santhosh,
Blog is for Microsoft employees only. However, you can contribute towards WIKI and GALLERY using the below links.
http://social.technet.microsoft.com/wiki/
http://gallery.technet.microsoft.com/

Dummy needs help with zen mi

I recently purchased a new laptop with widows vista and I had had xp before. My computer tells me that the driver is not supported or rather that the driver is not found. Know i've been searching around for info and i saw that there are many posts on this subject, however most of the post are way to advance for me to understand.. can anybody please explain to me in Dummy language how to get my zen micro to work with the windows vista pleeease and be patient with me im way to dumb for any big computer talk lol thanks for anyone who might help me.

Hi, the answer may not be as simple as you would like ...
Vista needs the Zen (insert older model) to have its firmware changed to Version 2.x which is referred to as MTP or media transfer protocol. If you do this it is a one way change meaning you cannot go back. That could be good or bad depending on a number of things but for simplicity, let's say you only have a Vista computer. You will need to go to MTP firmware. The catch is that you can only do that under a computer running Windows 2K or XP.
So ... find someone with a 2K or XP computer with an open USB port. Browse to Creative.com's download section adn download the Zen drivers (these install onto the computer so that the computer can recognize the Zen Micro), and download the latest ver 2.x firmware for the Micro. Install the drivers and reboot. Then upon restarting plug in the Micro and let Windows do its thing about finding new hardware. Once that is done and OK, run the firmware installer. During this time, do nothing to the computer or the Zen. If the process interrupts you could end up needing to send the player back for a repair.
Let the firmware install and when completed unplug from that computer and go over to your Vista computer. Plug in and you should be able to manage the Zen from Windows Media Player. Or install Creative Media Source 5 and its plug in modules and you will be up and running.
Good luck!!
jake

Help with zen micro photo media explo

i installed all the things from the cd needed including the media explorer..i plug in the zen micro and my computer detects it but when i open up the media explorer, so i could transfer my music onto my device, nothing is clickable. can anyone help?

Hmmm, are you opening it up after you plug in the Zen?

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Help with Zen Micro installat

I bought a Zen Micro and came home extremely excited, having previously owned a Zen Xtra 30GB complimented by an Audigy 2 soundcard. I put in the installation cd; as the drivers for the Micro are being installed, it stops at 99% saying "Jukebox Driver" and an error message. It then says: "Do you wish to continue with installation?" I've tried yes and no. With both answers, my player does not get detected. I've tried uninstalling and installing several times. I went on the support site and downloaded the Driver update. When installing that, the installation stops at 87% and again gives me the same message.
Please someone tell me how to fix this so I can enjoy my Micro.

Basketcase78 wrote:
My Quicktime is completely up to date with all updates. As for downloading the latest drivers, I said I already tried that for Zen Media Explorer. Being I'm on dialup, I really do not have the patience to do the same for Mediasource as it's a 30MB+ file. I also had Mediasource previously from Audigy 2 and my Zen Xtra, so I don't see why that would be the problem.
Apologies, I missed that last sentence.
Aside from ZMME have you download the latest DRIVERS though? i.e. Creative Zen and Jukebox Driver Upgrade version .30.03
Please, someone tell me what I should do. The very first time I installed, Windows detected it, but that has nothappened since. I've also tried going in through Add New Hardware in the control panel, but Windows cannot find the drivers on the CD or on the internet. So I'm truly lost in what I'm supposed to do.
The drivers are located in C:\Program Files\Creative\Jukebox 3 Drivers, try pointing the driver update there (or at least check the directory exists and has files in it). Of course if the drivers have not extracted properly this might be your issue.
Also try installing the drivers from Windows Safe Mode.

Need help with Page Layout and Background Scaling

hello, everyone.
I am in the process of designing a new website for myself,
and while I was researching nicely designed pages to use as
inspiration, I stumbled upon this site:
http://www.jeffsarmiento.com/
obviously, the design is very impressive, but it also
incorporates a lot of web mechanics that I have been trying to
figure out, so I will use this page as an example.
one thing I need help with is backgrounds. as you can see in
the posted website, the creator used a seamlessly tiled paper
texture to display the bulk of his content on. also make not of the
pattern that is located to the left of the paper texture. how do I
create seamless backgrounds like this that will scale to fit any
amount of content or any resolution? I can't imagine that the guy
that made that site created a new size background every time he
made an update, so there has to be an easier way.
the second thing that I am having trouble with is general
site layout. I have read that most sites used series of invisible
tables to organize there content, but when I open the source of
this page in dreamweaver, he was using something different. div
tags? should I be using these? who do I use them? are there any
general layout tips that someone could pass on to me? perhaps a
link to a good tutorial?
please help me. i am very confused.
thanks so much.

IMO not a good site to emulate. To wit:
Top background image:
http://www.jeffsarmiento.com/images/bg-top.jpg;
745px
x 350px 137K
Main background image:
http://www.jeffsarmiento.com/images/bg-tile.jpg;
745px x 950px 130K
Total page size: 454K (Check here:
www.websiteoptimization.com)
Website usability experts routinely recommend a maximum page
size of ~80K
Check out the We We Scale @ www.FutureNowInc.com/wewe/ where
they suggest,
"You speak about yourself approximately 0,003 times as often
as you speak
about your customers. Might that have an impact on your
effectiveness?"
That is 100% consistent with the #1 Web Design mistake:
"Believing people
care about you and your web site." or to phrase more
expansively, "Our site
tries to tell you how wonderful we are as a company, but not
how we're going
to solve your problems."
www.sitepoint.com has some excellent books on making a
website actually
attractive and usable at the same time.
Walt
"beWILLdered_" <[email protected]> wrote in
message
news:[email protected]...
> hello, everyone.
> I am in the process of designing a new website for
myself, and while I was
> researching nicely designed pages to use as inspiration,
I stumbled upon
> this
> site:
>
http://www.jeffsarmiento.com/
> obviously, the design is very impressive, but it also
incorporates a lot
> of
> web mechanics that I have been trying to figure out, so
I will use this
> page as
> an example.
> one thing I need help with is backgrounds. as you can
see in the posted
> website, the creator used a seamlessly tiled paper
texture to display the
> bulk
> of his content on. also make not of the pattern that is
located to the
> left of
> the paper texture. how do I create seamless backgrounds
like this that
> will
> scale to fit any amount of content or any resolution? I
can't imagine that
> the
> guy that made that site created a new size background
every time he made
> an
> update, so there has to be an easier way.
> the second thing that I am having trouble with is
general site layout. I
> have
> read that most sites used series of invisible tables to
organize there
> content,
> but when I open the source of this page in dreamweaver,
he was using
> something
> different. div tags? should I be using these? who do I
use them? are there
> any
> general layout tips that someone could pass on to me?
perhaps a link to a
> good
> tutorial?
> please help me. i am very confused.
>
> thanks so much.
>

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Need help with show/hide and layers moving

I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?

> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
>

Help with zen micro! songs not appearing in creative mediasorce organiz

ok i decided to add a few songs to my zen micro and found out when i go to the mediasource organizer it woulden't detect my music! is my mp3 player corupt? i have even tried finding my music in windows exploror but that wont even detect it shows up blank but my mp3 player plays my music just fine. why!?

i tried installing from windows/INF and no luck there... the ONLY way it was recognized was when I configured the zen as a 4gig portablestorage dri've and that popped up immediately BUT only as storage!?I've reset it.. done the 'cleanup' stuff.. still no go. My XP install is a standard install, no quicktime and no WMP . what gives?I've looked at all pertinent articles but it doesnt seem like there is one specific fix for this.

I need help -- my zen micro doesnt w

first of all, sorry for my bad english..im brazilian, and i got my zen micro 5gb (black) in last week..i really enjoyed it!! so funny, functional, and practice, etc.. whatever, yesterday i was listening and a went in menu to turn on back lights.. and it works.. the lights turned on.. but the player has stopped.. doesnt respond any action..then, i tried so many times displugin the batery.. but when initialize stopped on CREATIVE logo. copyrightt 2004... already tried connecting on pc.. but nothing.. last night.. i wait the battery went down.. but when i put it to recharge.. shows the same problem.. i really dont know what should i do..so.. is this.. if anyone could help me i will be so happy..thanks a lot

Oi!
Tried a disk cleanup? To run a Disk Cleanup you need to access the Rescue Mode on the Zen Micro. To access the Rescue Mode: remove the battery, hold the power switch to the "on" position and KEEP IT HELD TO "ON" while reinserting the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.

Need Help Urgently Zen Micro "Firmware Problem&qu

Hello,
I've had my Zen Micro for a year now and due to a "screw up" when i start my player it displays the error "Firmware Problem" and start up in recovery mode. When I try to reload the firmware the update application on my pc it says "Your player is not connected" now can I fix this so I can start using my wonderful Zen again?
PC Specs If needed: Windows Media Center Service Pack 2

Thanks for the reply, but that firmware download doesn't work for me. As I said in my original post, my player is not recognized as being connected when it is. It is not my computer because Jukebox opens up when it detects the device and it is listed among my removable hardware.
I've downloaded the software, but nothing happens after the "select your language" prompt. It just says "Your player is not connected please connect your player" with a grayed out 'Upgrade' button and a darkened 'Close' button. I've tried unplugging and reconnecting the USB, but it still doesn't recognize that it's there.
Anyone else have an idea?Message Edited by lizzievee on 02-04-2007:29 AM

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

Need help with Zen Micro and Win

Similar Messages

Maybe you are looking for