Need new key-caps for Thinkpad T61 wide-screen.

There seem to be lots of types of key-caps. How do I tell which one I need. I did try to find it on line, but its too confusing.. There's a lot of info and a lot of videos. Once I GET the key caps I can watch the video to see how to replace (or get desparate and go to geek Squad.

Welcome to the forum! Are you trying to just replace a few keys or the entire keyboard? The video will walk you through replacing the keyboard but not individual keys.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

Hi ... where can I buy new key caps for my macbook pleeeeease ?

Hi .... any ideas where I can buy keycaps for a macbook please ?

http://www.powerbookmedic.com/MacBook-Keys---Individual-Key-Keycap-p-16959.html? source=pjn&subid=43737

Need new compact printer for lion os, suggestions?

Need new compact printer for lion os, suggestions?

This page provides the specs and requirements for Moutain Lion: http://www.apple.com/osx/specs/
It appears you must be running Snow Leopard (or newer) to upgrade to ML: http://www.apple.com/osx/how-to-upgrade/

Which bag do you use for 14 inch wide screen?

Which bag do you use for 14 inch wide screen?
I got confused when searching for possible candidates. Almost all wide screen bags are designed for 15.4 inch. Few 14 inch bags are fit only for the normal 4:3 screen.
Any advice from you are welcomed!
Many thanks!

Hello,
Other brands you might want to look at are Brenthaven, Case Logic, Eagle Creek, EastPak, EZM, Jan Sport, Kensington, Swiss Army, Targus and Trager. There is also an earlier message thread here in the forum discussing carrying options, and a quick search of the Internet found some messages here, here and here that you might find of interest.
There really are lots of different solutions when it comes to carrying your ThinkPad, so it might be best to visit a few computer, electronics, office supply and sporting goods stores to find something you like and meets your needs (and budget). If you do not have your ThinkPad to yet, consider either bringing a tape measure or a piece of cardboard cut to the dimensions to "test" with bags.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

What drivers do I need to reinstall different OS and where can I download them for ThinkPads T61?

I just accidentally purchased one ThinkPads T61 with Linux OS version. I don't use Linux so I plan to wipe out Linux and install Windows XP Pro instead. I have the Windows OS, but as I know I will need to install some drivers afterward to make the notebook work properly.
My question would be: How many and what drivers do I need to reinstall different OS and where can I download them?
Thank you for your help!
Solved!
Go to Solution.

Right here.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Need new activation code for NFR XS key

who knows who to email to receive new activation codes for logic NFR key. I havent gotten a response for the [email protected] address. what is the proper Apple email address to get codes from?

All the suggestions in this forum were made because people assumed that you are using Logic Pro 7.1 and Mac OS X.
I didn't assume this at all. I still think that they should be contacting apple, because as far as I can tell, an NFR version of a no longer selling product is not something you would ideally want to be hanging on to. apple would be able to tell you if they'll change it over for a logic 7 one, or to have a license bought for it so you can keep running 6 on OS9. NFRs are after all demo versions, usually given out to dealers and/or VIPs, I don't see why they would want to maintain NFR licenses out there for software that they are no longer demo-ing to sell. doesn't mean you can't buy a normal license though.

Please help on key caps of Thinkpad X61, thanks.

My notebook is Thinkpad X61 bought in December 2007. The cap for key "S" is lost and I am wondering where I could get a new one? I mean the black, plastic key cap covering the "real" keystroke with letter "S" engraved on it.
I am in Melbourne, Australia. Anybody can provide the contact details of Melbourne-based Thinkpad Service Centre?
Thanks a lot!

Question:
1) Does moving the tables to another tablespace
SIGNIFICANT better than moving the tables to the same
tablespace for the purpose of re-org? As i can see
that moving to the same tablespace don't help much.If you create LMT ( Locally manage tablespace) and move table to LMT , it will improve performance. Also collect stats for table after major update/delete/insert.
2) As for my case, my filesystem do not have enuff
space for the new tablespace to cater for the 400
tables. So i can only resort to the export/import
method?
Yes, there is no other solution if space is not there
Virag

Need product key number for installed Robohelp HTML

Hello,
Can anyone tell me how to determine which product key number
for Robohelp HTML X5 is used on a particular machine?
We have two X5 licenses here, but I only want to upgrade one
license on one machine. I do not know which product key number was
used to install X5 on either machine.
I'd like to maintain older projects using X5 and upgrade one
license to develop new projects using Robohelp 8.
From what I understand--and PLEASE correct me if I am
wrong--I can run both versions on the same machine as long as I
install in different folders.
Deb

I don't think there is any way of telling but suggest you
phone the activation people. If anyone knows, they should.
http://www.adobe.com/activation/phonenumbers.html
You can install RH7 on a machine with X5 but you will have
issues if you need to use RoboHelp for Word in X5. Importing Word
docs and printed documentation will still be OK.

How to trigger the BIOS CRISIS Recovery mode for Thinkpad T61.

For any other laptop, there's a possibility to run a BIOS crisis recovery, by holding Win-B or Fn-B and a few other conditions, one can make the laptop to boot up from a USB floppy drive and restore BIOS even if it's not working. But it seems that it doesn't work for ThinkPads, or I don't know to trigger the mode.
Thank you in advance.

Your post was very helpful. It did the trick. The photos of the screens and etc. helped.
I am using a Toshiba laptop that came with Winddows 8.1 (64bit), which allegedly supports UEFI boot.
Initially, the boot failed and after trying different settings I recalled a statement that not all USBs work the same and results may vary. I tried another USB and your selections worke perfect.
I did not revert the BIOS settings and the machine boots properly to the normal login.
My need for a bootable USB is to boot the laptop if the hard drive fails. This allows to either re-image it or replace the hard drive and for re-image it. The key is the bootable media.
Thanks for your effort..!
MarkinID
PS - I've clicked the Kudos button

Need new result file for each iteration of a loop

I am using TestStand 2010 SP1. I have a main sequence that essentially does the following:
Initialize the test equipment and set up the test environment [Sequence Call]
Start Loop
Run Tests [Sequence Call]
End Loop
Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration. I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization. The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop.
How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop? I am open to any other suggestions. Thank you in advance for your help!

Hi,
You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
cc

New key combination for access sequence

hi,
i have an active access sequence called ZBMP. There is 2 key combinations to the access sequence
5 materail / plant
10 material
I need to add a new key combination
15 - material / Pant / Distribution Channel
to the access sequence.
Can someone please help.
Regards

Hi,
Step 1: Go to V/03 and create a table with key fields(material / Pant / Distribution Channel) or Use the existing standard table.
Note the created table number.
Step 2: Go to V/07 and select your previous Access Sequence and Double click on the Access field under Dialogue structure. click new entries and specify the new table number with step number (Created in step:1).
Step 3: Now select the Line item and double click on Fields. Ignore the warning by pressing Enter Key.
Now do save.
Step 4: Check your Access sequence. New table would be added.
Hope it helps.
Regards,
A.Govin

Need new keys

Hi,
I'm new to the forum and this is going to be one of those daft questions.
While cleaning the key pad on my Sat pro I have managed to break the enter key. The plastic clip has broken and it wont click back down. Does anyone know where I could get a new one from? Sorry for the stupid question.
Thanks
Debbie

Hi Debbie,
you can get new keys from a Toshiba service partner.
You can find one here:
https://eu.computers.toshiba-europe.com
under "Support & Downloads" - "Find an authorised service"
Bye

Need new power adapter for Qosmio F50

Hello
I am in need of buying new power adapter for my Qosmio F50 126. The reason being if I try to run more demanding application on my computer, the entire computer just crashes, shuts down. I need to buy a new adapter before my entire computers crashes result in destroying my HDD. I am not sure if my battery are died or the power adapter fails to charge them up.
The picture of underside of my power adapter is shown below.
https://www.dropbox.com/s/qcrk4fl5bhftbzm/IMG_20131220_215821_454.jpg
What I would like to know if the following two adapters are the same and would work with my model. I ask this because the price difference between the two units is significant., 20 USD. Also, I will be importing it from the USA using an agent here. Therefore I need to get it right on the first try.
I'm curious about the connecter it has on the end. I wonder if its same as the one which came with the notebook. I believe it wont be an issue with it clearly says it supports my model, Qosmio F50 126
Another find which I believe is the best and most compatiable.
This one will sure work but the price is much higher than the one mentioned above
Regards
Abdusamed
+Message was edited: link to onlineshops has been removed - advert+

Hi
You need an AC adaptor which supports *19V and 6.32A*
The Ampere value might be a little bit different. This should not be a big problem but you have to ensure the Ampere value isnt too low. The notebook needs enough power to run properly and to charge the battery.
However, the Volt value (19V) cannot be different. _It has to be *19V_*
The original AC adaptor has the part number: *PA3290E-3AC3*
I recommend you to purchase the AC adaptor recommended by Toshiba.

Slot-in DVD for Thinkpad T61

(First of all sorry for my english. Hope you understand me)
I'm looking for a slot-in DVD drive for my Thinkpad T61.
I live in Hungary and I've found only two affordable options. Get a Samsung slim slot-in drive or a MacBook's SuperDrive (maybe Panasonic or LG). I still have my guarantee so if I buy one of them; can the service "fit in" to my Thinkpad? I mean, I have to buy a special "only for Thinkpad" DVD drive or one of these also good?

Well there are over 500 different slim-line and super-slimline DVD drives on the market, some of them with special firmware versions and some of those drives are build as slot-in drive versions. Even most of the sizes (12,7x129x128 mm) and connectors (JAE 50 pin) are to 98% equal, there still some differences and things to take into account.
The overall problem with a slot-in DVD drive will be to find a suitable front-panel for a Thinkpad T61:
http://www.notebookreview.com/picture.asp?f=22775
As you can see, beside maybe some possible firmware version conflicts, the main common problem for you with a Thinkpad T61 will be, to find a suitable front-panel for a third-party slot-in slim-line drive here! - BTW, I have a Samsung slim-line slot-in drive, which I use as a secondary external USB/Firewire drive when I travel. The front-panel which is supplied with the Samsung slot-in drive will not adhoc fit for a Thinkpad T61!
ThinkPad T60/X32/600/770 · IBM IntelliStation · 3x IBM SpaceSaver II

Need New Video Cards for 4 Displays

Hi,
I want to install 4 displays, with one being a 30". Will the Radeon 9200 PCI, and 9600 pro work for this?
I saw that 9600pro only boots in "safe mode" but that's the only AGP card I can find that will run the 30".
Are there any PCI cards with two DVI ports?
Thanks

Hi-
Wouldn't getting the 9600 and a 9200 be the most cost effective?
Need two 9200's and one 9600 to connect 4 DVI displays. At around $400, it would be the cheapest. The 9200, though, will have minimal graphics acceleration and no Core Image support. Quartz Extreme is also not supported, unless hacked. Either the hack, or the lack of CI or QE support may affect software performance negatively.
Depending on the distance from the source computer, a signal booster may be required. 5 meters is the maximum a DVI signal can travel, but lesser powered cards may have difficulty at 10 feet (or less). If a booster were needed, a 9600 and a splitter would be better.
Wouldn't the splitter just mirror the output?
The splitter mirrors the output of the primary display +on the splitter+, not necessarily the card.
When you say "better" what do you mean? I won't be doing much 3D stuff and no gaming.
The linked cards support Core Image, Quartz Extreme, 30" ACD, and have power enough to send clean DVI signal farther.
Plus I can't find it new which is how I would prefer to buy it.
The Flashed PC cards are new. Because of the fact that they have been installed in a machine to flash the Mac ROM to them, eBay rules require that the card be listed as used.
New card prices are scary. See prices here.
Slightly lower prices here.

Need new key-caps for Thinkpad T61 wide-screen.

Similar Messages

Maybe you are looking for