Need of changing the default stack size permanently as reported by ulimit -

Hi All,
In order to install proper 11gr2 on solaris 10 I need to make change of stack size permanently.
My current ulimit -s is 8192 but according to the oracle 11g installation docs (Configure Shell Limits) they recommend you change the value reported by ulimit -s to be 32k (or 32768).
I can change this value usiing "ulimit -s 32768" but after reboot of sever this value alwayes change back to old value(8192).
I tried to do that in /etc/projects but not able to make this permanent, How to make stak size permanently in solaris 10.
I am on ...
Oracle Solaris 10 8/11 s10s_u10wos_17b SPARC

Hi;
I suggest please review:
http://serverfault.com/questions/21417/how-to-set-ulimits-in-solaris-10
It seems that parameter will lost after server reboot. SoThe above settings are not permanent and will be lost after the reboot of the server. To make the changes permanent you need to set this in the respective user profile file. (For ex : .bash_profile on linux)
Please review:
Connecting Using: sqlplus "/ as sysdba" Fails with ORA-12547 with Lower Ulimit Setting [ID 878375.1]
Regard
Helios

Similar Messages

Change the default stack size in the java.exe file

Does anyone know how to change the default stack size of the jvm?
I'm having problems with my stack. Is there anyway I can change it. I found a tool editbin.exe which is shipped with Visual c++, however I don't have the tool.
Thanks,
William

I am using JNI to connect java with a C++ application.
When calling the C++ appliction, STACK_OVERFLOW
happends. I tried java -Xss<size> to increase the
stack size, but failed.This has nothing to do with the above question.
Does anyone knows why?Probably because the java parameter specifies the java stack size and not the C++ stack size.

How to change the default font size in X11?

I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).
The default font size in the Xterm is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
Is there a way to change the default font size "permanently" in XQuartz/X11 ??
This may be a stupid question to ask in the developer forum but i cant really solve it.
There's only config. file ~/.Xdefaults they have mentioned so far on Google but i really cant find it regarding to the directorty.
Thank you very much in advance.

You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
I wish that Apple would invest more in discussion, and going towards making this more practical.

How to change the default font size in XQuartz?

I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).
The default font size in the terminal is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
Is there a way to change the default font size "permanently" in XQuartz/X11 ??
This may be a stupid question to ask in the developer forum but i cant really solve it.
There's only config. file ~/.Xdefault they have mentioned so far on Google but i really cant find it regarding to the directorty.
Thank you very much in advance.

You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
I wish that Apple would invest more in discussion, and going towards making this more practical.

Change the Default Page Size for WebI

Hello Experts,
We have requriement where we need to change the default page size and margins for WebI, I have change the page size in defaultconfig.xml but don't see any options for Margins, How do I change the default margins?
Any help or suggestion would be highlt appereciated.
Thanks,
Nishith

From what I am finding it doesn't seem to be possible in 3.x, I could be wrong and someone might chime in with a workaround but at least it was added in 4.0
-Dave

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How can I change the default page size for the Adobe PDF Printer?

Hello All,
I have cases where I need to switch the default paper size from 8.5x11 to 11x17 via api for the Adobe PDF Printer and have not been able to find how this can be accomplished.
I am using C# .Net and would appreciate any help.
Thanks in advance,
Bob

There is no Acrobat API for this, but so far as I know there doesn't need to be. The user can go change this from the Printers Control panel as needed. The Adobe PDF printer has some differences from regular printer drivers, but this isn't one of them.

Need help changing the default Save Path

Hello,
We are implementing SAP, and will be using Citrix as the source for the GUI. One of our requirnments are, that we need to change the default "Save Path" that users save documents too. By default, this is to the C drive, but, we need it set to a different drive (i.e. V: on the citrix server).
We found this note on SDN (see below) - however, it does not explain how to change or add this registry value? Is this done in the GUI options, or in regedit? If in reg-edit, where abouts in the tree does it go?
Thanks guys, and any help would be greatly appriciated.
Richard
(As of SAP GUI 7.20, patch level 4) the REG_EXPAND_SZ registry value InitSaveDir can be used to configure the default path and folder for users to save the reported information in case of an access denial due to security rules. If users change the default path and save the information to an individual location, this new path will be kept as long as the user does not terminate the program. When starting SAP GUI again, users will get the configured default path again to store the reported information, the individual path changes will be lost. If the registry value does not exist, the default directory is the document directory of the SAP GUI.
By default none of the above registry values exists. In order to change the behavior of the security module, the registry values need to be created and set to the desired value. A not existing registry value means use the default.
In this doc:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true

Hi,
"Security rules that are created for a large number of users can be centrally stored on a server by an administrator. The administrator can use the registry values below under the registry key
[HKEY_LOCAL_MACHINE\Software\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module.
Note: For 64 bit operating systems please use the following registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP\SAPGUI Front\SAP Frontend Server\Security]
to configure the behavior of the security module."
You can use regedit for installing this values.
Best Regards,
Aleh

How do I change the default paper size in Firefox if Printer Properties does nothing?

I print on different including a receipt printer with roll paper.
I had to reset Firefox yesterday because of a bug, and then changed the Printer Properties to be able to print again in the right format on the receipt paper. But now everything I print from Firefox (even when I change the paper size to Letter on the Printer properties for the regular printer) is in the receipt paper format (long and narrow.) When I do Print Preview, I can see that the paper looks like the roll paper, even if I'm trying to print on letter size.
I tried resetting both printers with about:config, I tried changing in the printer properties for both printers and nothing works.
Is there a way to change the default paper size in Firefox?

Hello,
My understanding is that Firefox uses the global printer settings. I am not familiar with the Windows 8 interface, but can you change the printer settings in its Devices and Printers and see if it changes the default for Firefox as well?

Change the Default Page Size for WebI Rich Client 4.0

Hi:
I am trying to change the default paper size for Webi Rich Client 4.0.
In 3.x you made the changes to the defaultconfig.xml located in the path C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\classes\AppletConfig.
In 4.0 I canu2019t seem to locate the file, can you advise if the file is the same name and where the file located.
Thanks
Brad

Hi,
Please check out the User Guide - see section Web Intelligence Cascading Style Sheets (CSS)
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ia_en.pdf
Regards
H

How to change the default library size...

I have a PowerMac G4 with 1.25ghz and 1.25gig memory. I also have about 7500 photos, a total of about 10 gig, with about 1/3 taken with a Nikon D70. As you might guess, iPhoto (and only iPhoto) is really slow to open and close...I get the beachball for a minute or so before anything happens.
In reading topics surrounding the slowness of loading/closing iPhoto, one person suggested changing the default size of the iPhoto library...but they didn't say how? I'm assuming that this changes it so that the system doesn't need to show the whole library? This isn't just viewing the pictures as large pictures instead of thumbnails is it?
Any help would be appreciated....also, if there is another solution I'd love to hear about it.
Thanks,
Tom

Thomas:
As you've read the problem comes from your Nikon camera and the MakerNotes it creates and adds to each image file. I believe you're referring to splitting up your library into smaller sub libraries. That can be done by making a duplicate of your current library, call it Lib1. Then open Lib1 with iPhoto and delete all the photos but those you want in that particular library. Make another duplicate of the original library, Lib2, and repeat the process. That way you'll have multiple smaller libraries that you can manage with either iPhoto Buddy or iPhoto Library Manager.
Eric Lindsay developed applescripts to remove the MakerNote information from the Library.iPhoto file which gets the speed back up to what it should be. However, any new imports from the Nikon will add MakerNotes.
OT

How do I change the default paper size for printing?

I am running Firefox 3.6.3. Recently, the default paper size for printing unexpectedly changed to a user-defined size of 3.00" x 4.57". It used to be letter size (8.5 x 11). The default paper size is 8.5 x 11 for everything else. I have tried changing the size in the preferences dialog box and then clicking "default", but after I close Firefox or if Firefox opens a new window, the default size switches back to 3.00" x 4.57". Does anyone know how to fix this?
== This happened ==
Every time Firefox opened
== About 2 weeks ago

In "mine" dutch firefox 3.6.12 there is no option to change paper-size see
"about:config" Promise to be careful (and be!) Enter "print.postscript.paper_size" gives a empty screen
"paper_size" gives a few results
What about the numbers 4259872, 4784247 and what is the meaning of
paper_size, paper_size_type , paper_size_unit

Can I change the default page size for SYSBUILD?

When I start SYSBUILD it always has a default page size of Letter set, is there any way to change this as most of the blocks I wish to print are to be printed on A3 paper?
Many thanks
Tim

Hi Tim,
Unfortunately there is no option to change the default print settings for SystemBuild. You must manually select the A3 paper size under File>>Page Setup.
Thanks for the suggestion though, I will pass that on to R&D as a product suggestion for a future release.
Regards,
Jeff M.
Applications Engineering
National Instruments

I need to change the default network name on my iMac

I recently changed routers and my iMac keeps trying to join the "default" net work as it did in the past. That is no longer working and I need to have the default changed to the name of the new network. It keeps trying for some time (meanwhile I am not connected to the internet) and eventually the computer finds the name of the new network that works and after a long wait it works.

Open System Preferences > Network > Wi-Fi (or AirPort) > Advanced, and remove your old network from the list of preferred networks. Your computer won't try to connect to the network anymore, and it will only connect to your new router

Need help changing the default load page in Flash

Welcome,
I recently purchased a flash template. The one problem I am having is that the default page that starts up when you play the movie is not the page I want it to start on. It is starting on the gallery section of the menu item which is the 3rd tab and I wanted to start on the very first tab/menu item which is,About Us section. What steps would I take to change the default homepage so it opens on About Us instead of Gallery.
Here is an example. This is not my site but it's to illustrate what I am talking about. www.thunderfuel.com. It's like my webpage is starting up on the Web Design Tab, instead of the Games Tab which I want it to.
Thanks

That's why the gallery shows up first then, its first in the timeline. There are a number ways you can change this. 1. You might select the section in the timeline that you want to show first and move it to the beginning of the timeline. 2. You could add a simple gotoAndPlay() directive at the start of the movie to tell the playback head to move immediately to the section that you want to show first.

Need of changing the default stack size permanently as reported by ulimit -

Similar Messages

Maybe you are looking for