Need Oracle Database 10g For Mac OS 10.4 PowerPC

Hi, I am looking for Oracle Database 10g for Mac OS 10.4 PowerPC. I need to run this software on a PowerBook G4. I would appreciate any download links or tips that can help.

I am using Virtual PC 7 running Windows 2000, but the emulator runs painfully slow. Things would run a lot smoothly if I had the PowerPC version of Oracle Database. I heard it exist.

Similar Messages

Quelqu'un a oracle database 10g for mac ??

comme vous savez oracle a fait une version oracle database for mac 10g mais elle n'est plus comersialisé .

I am using Virtual PC 7 running Windows 2000, but the emulator runs painfully slow. Things would run a lot smoothly if I had the PowerPC version of Oracle Database. I heard it exist.

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

"Personal Edition" & "Oracle Database 10g for Linux"

Is there a personal edition for "Oracle Database 10g for Linux" ?

The enterprise edition download CD will give you the option of installing the personal edition as one of the install options.

Need step by step installation of oracle database 10g on mac os x (10.5)

Does anybody know step by step installation of Database 10g on mac os x?
Thanks

First you download Oracle 10.1.0.3: The only supported database version.
Then you beg Apple to send you a copy of Panther 10.3.6: The only supported operating system version.
Then, if you are familiar with FreeBSD and/or Mac OSX, you should have it up and running in a day or so.
If you are thinking you can do this with 10gR2 or above on Tiger or Leopard you might want to consider that dropping a brick on your foot is faster and will generally produce the same sensation.

Install Oracle Database 10g on Mac OS X Snow Leopard

Hi,
I have installed 10g successfully but when I go to create a database through “Database Configuration Assistant” I get a pop up error message.. “ORA-03113: end-of-file on communication channel”.
I Send you the my configuration.
You have a idea ?
Regards and Thanks
Antonio M.
Darwin amusarra-mobile.local 10.0.0 Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386 i386
ProductName: Mac OS X
ProductVersion: 10.6.1
BuildVersion: 10B504
I send you an extract from the trace file.
/u01/app/oracle/admin/orcl/udump/shirus_ora_386.trc
Oracle Database 10g Release 10.2.0.4.0 – Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
System name: Darwin
Node name: amusarra-mobile.local
Release: 10.0.0
Version: Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
Machine: i386
Instance name: SHIRUS
Redo thread mounted by this instance: 0
Oracle process number: 0
Unix process pid: 386, image: [email protected]
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0×2773fbeb8, PC: [0x107b8d380, joxnfy_()+2763]
%rax: 0×00000002773fbeb8 %rbx: 0×00000000000003f0 %rcx: 0×000000010904f078
%rdx: 0×00000000000004e7 %rdi: 0×000000010904f0d2 %rsi: 0×0000000000000000
%rsp: 0×00007fff5fbfad40 %rbp: 0×00007fff5fbfaf40 %r8: 0×000000010904f0c4
%r9: 0×0000000000007fff %r10: 0×00000001073bf5a0 %r11: 0×000000010904f0cf
%r12: 0×0000000000000000 %r13: 0×0000000000000000 %r14: 0×0000000000000000
%r15: 0×0000000000000000 %rip: 0×0000000107b8d380
*** 2009-10-26 22:07:25.928
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [joxnfy_()+2763] [SIGSEGV] [Address not mapped to object] [0x2773FBEB8] [] []

Welcome to the forums !
Pl note that Oracle is not yet certified on Snow Leopard.
Pl see this thread (use the Search function to find more)
Apple Snow Leopard installation
Srini

How to install Oracle Database 10g for windos vista

hia
i am new student in a collage and i started learn SQL command
i want to practice SQL command in my Laptop
i downloaded Oracle Database 10g Release 2 (10.2.0.3) for windows vista
but i have difficult to install it i mean i wana know the steps to install oracle
could u show me by photo or video how to install oracle in my labtob
also some of my friend said u should have a local server in ur labtop to make oracle programe work .... is it true??
if it correct learn me how to make it and connect it to oracle
also some of my friend said u should have a this information form oracle web side
USER NAME :
PASSWORD:
HOTAGE STRING :
please help me

haloooooo
i am waiting for somebody to help me
nobody can
pliz pliz plizPlease, please, please understand that this forum is populated with unpaid volunteers. It's not a help desk.
The complete installation installation guide is included with the installation software. It is also part of the exhaustively complete documentation set for every oracle product found at tahiti.oracle.com. Go there, select your product and version. When you arrive at the page for your specific product version, somewhere on that page (location varies between versions) you will find a link to the installation guide.
Also please note that there are several versions of Vista, and the Oracle db is not certified for all of them, but only for specific versions.

Export for oracle database 10g for one month

Dear friends,
I want to create new instance for development so i want only limited days of data in new instance say one month.
Can any one please do tell me how to take the export of only one month or limited days from the production database ? as my production database size too big.
please do help me...
Thanks

Dear friends,
I want to create new instance for development so i
want only limited days of data in new instance say
one month.
Can any one please do tell me how to take the export
of only one month or limited days from the production
database ? as my production database size too big.Check out the query or sample syntax for data pump export.

Oracle Database 10g and Oracle Client 9i together

Hi, I've been lost some nights in this problem, in my job I will need migrate my Oracle Database 10g for a new computer, on the other hand, there is a software in this computer wrote in Visual Basic and this running only Oracle 9i Client.
Is it possible configure my new server for run Oracle Database 10g and Oracle 9i Client together?
Thanks!
Emerson

You can certainly use an Oracle 9i client to connect to an Oracle 10g database. Technically, you may have to apply the 9.2.0.4 patchset to the Oracle client to be completely supported, but that may not be strictly necessary.
You can also have both a 10g database and a 9i client installed on the same machine in different Oracle Homes. You may have some issues on Windows, however, if you are using software that is not multi-home compliant (i.e. the Microsoft ODBC driver for Oracle) or if you call Oracle command-line utilities (exp, imp, etc) without explicitly setting the PATH first.
Justin

1Z0-045: Oracle Database 10g: New Features for Oracle 8i OCPs

Hi,
I was looking for right reference book for the 1z0-045 upgrade certification. I could not find any reference book that is related to this certification. Only one book have found out on Amazon site, which is "OCP Oracle Database 10g: New Features for Administrators Exam Guide (Oracle Press) (Paperback)" published by McGraw Hill.
But this book does not show exem number 1z0-045 anywhere. So I am not sure, is it a right book to buy.
Please let me know if any one has any knowledge about that.
I appreciate for your information.
Thanks
Amit

The book you mention is for those individuals who are upgrading their 9i OCP to the 10g OCP. Since you are apparently upgrading from 8i OCP, there is possibly a gap in your learning. You might want to take a look at OCP Oracle9i Database: New Features for Administrators Exam Guide (Paperback) which explains the new features for Oracle 9i to someone coming from an 8i background. No additional exam would be needed in your case but this book may help to fill out your knowledge a bit. You could also take a look at http://download.oracle.com/docs/cd/B10501_01/server.920/a96531/toc.htm if you would rather not buy an additional book.
Tom

Export import - using TOAD FOR ORACLE and ORACLE DATABASE 10G EXPRESS or s

Hi all,
Could you please kindly help me?
I am using TOAD FOR ORACLE to export a table to flat file A. The tool just supports to distinguish fields by "spaces".
And the web page of ORACLE DATABASE 10G EXPRESS to import the data from flat file A to another database. To load data to a table from a text file, the web page bases on "comma" to distinguish fields.
So could you have any suggestion for me? I need to export data via TOAD FOR ORACLE. And then import it to another database by the home page of ORACLE DATABASE 10G EXPRESS or sqlplus.
Thank you so much for your help!

Dont use TOAD for exporting your data. Use PL/SQL. Below is the code given in Asktom.com that does what you want.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2 default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i, l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i, l_columnValue );
            utl_file.put( l_output, l_separator || l_columnValue );
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;
/Here is the link to this thread in asktom.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059

Oracle Database 10g(10.2.0.1.0) for Windows server 2008 SP1

Hi,
I would like to install Oracle database 10g on Windows server 2008 SP1. What is the supported version ?
As I go through certification matrix on Oracle support, 10.2.0.5.0 is supported on Windows Server 2008, however I can I install it directly.
Any help in this regard is highly appreciated.
Thanks

TheExplorer wrote:
Thanks srini for your reply.
Currently, we are running a lower version of database i.e 10.2.0.1.0 on windows server 2003. I need to migrate theses servers into virtual environment running Windows server 2008 64 bit.
The document you referred applies to MS Windows 32 bit. However, I see that Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5) for Windows x64 are supported on Windows Server 2008 R2 x64.http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
From where, can we download the older versions of Oracle database as it is not available on OTN (The version of Oracle Database you are looking for is no longer available on OTN. Please visit any of the following links for current release information).
Looking ahead for the right direction
Thanks
You have to open a service request at My Oracle Support.

Require 10.2.0.2 in Oracle Database 10g release 2 series for XPprofessional

I am trying to install Oracle Application Server SOA Suite 10.1.3.1.0 on my machine. MY OS is Microsoft Windows XP Professional. I have Oracle Database 10g 10.2.0.1.0 on my machine.
After I give my database information at the time of installation, the Universal Installer throws the following error:
Database version should be 9.2.0.7 or higher in the Oracle 9i Database Release 2 series, 10.1.0.5 or higher in the Oracle Database 10g release 1 series, Oracle Database XE (10.2.0.1), 10.2.0.2 or higher in the Oracle Database 10g Release 2 series.
So according to this error, I need 10.2.0.2 or higher in the Oracle Database 10g Release 2 series. Now when I am searching 10.2.0.2 or higher version for Microsoft Windows in Download Section of Oracle Technology Network, I am unable to find it.
Please tell me where could I find it? Or is there any other solution to this error.
I need the solution urgently. Please reply.
Thanks & Regards,
Ashish

I need the solution urgently. Please reply.Urgent?
As in it is required for a business functionality, in which the business will gain some advantage through the implementation?
As in 'needed for production'?
As in 'requiring a production license for which Support may be purchased'?
Or perhaps, as in 'needing to evaluate and therefore having contacted Oracle Sales to obtain a Trail License with a temporary Support Agreement'?
If the version you want is not on the Database Download page and not on one of the links, and IS listed in Oracle Certify as being current, then you need to download patches through your valid Metalink account (based on paid support contract/agreement) to get to that version.

Pl Provide Rc. of SUN BIDW for Oracle database 10g .. datasize 10TB

Hi,
We need a Sun BIDW Reference Configurations for Oracle database 10g with raw datasize of more than 10TB.
Kindly help me providing any reference guide relevant to this.
Regards,
Debasis

Hi Debasis,
Try posting this in the following forum:
General Database Discussions
Thanks, Mark

Do i need IP address to install Oracle Database 10g

Dear all,
i want to test some thing with oracle database 10g release 2 at my home
but there i do not have a network card
so i will not be able to obtain an ip address, so can i install it without the need of the ip address?
Best Regards,
Ashraf

but there i do not have a network card
so i will not be able to obtain an ip address, so can
i install it without the need of the ip address?IP address is needed to install oracle database. But you don't have network card so you can use 127.0.0.1 , that is by default IP address for local host. Make sure you have made in hosts file ( /etc/hosts in Linux and C:\WINDOWS\system32\drivers\etc in windows ).
example
127.0.0.1 localhost <your hostname>
In windows you need to install a Loopback Adapter
Installing a Loopback Adapter
Virag Sharma

Need Oracle Database 10g For Mac OS 10.4 PowerPC

Similar Messages

Maybe you are looking for