Need Paths For Configuration Apache 2.2 And Coldfusion MX7

Please provide the default configuration directory and also
the directory and file name of the server binary for the drop down
configuration list in Cold Fusion to configure Coldfusion MX7 to
work with Apache 2.2. I need this immediately. I thank you in
advance!!!!!

Is this what you are looking for?
http://www.adobe.com/go/8001e97
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"spinaweb" <[email protected]> wrote in
message news:ervso2$n7c$[email protected]..
> Please provide the default configuration directory and
also the directory and
> file name of the server binary for the drop down
configuration list in Cold
> Fusion to configure Coldfusion MX7 to work with Apache
2.2. I need this
> immediately. I thank you in advance!!!!!
>

Similar Messages

Document for configuring Early watch alerts And issue tracking system

Hello Experts,
Iam on SAP Solution Manager 4.0 and need step wise step procedure document for configuring Early watch alerts and Issue tracking system in solman 4.0 . I hv checked Help site and other standard config docs by SAP but getting confused and things are not working ,so help shall be appreciated.
My Email id is [email protected] .
Requested to revert at earliest as iam in urgent need of it .Points guaranteed.
Thanks and Regards,
Somya

Hi Somya,
setting up EWA is explained in Application help of SAP Solution Manager.
It would be helpful to know, what you have already done and what is causing problems for you.
Prerequisite to process EWA is to configure all steps described in the Basic Settings of SAP Solution Manager Configuration guide (tx SPRO).
The configuration of Issue Tracking is also described in the IMG (Basically, it's required to activate a BC Set).
Path in IMG: Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Basic BC-Sets for Configuration -> Activate Issue Tracking BC Set
Access the configuration guide:
- run transaction SPRO
- choose SAP Reference IMG
- expand tree SAP Solution Manager -> Configuration -> Basic Settings
- follow the steps under
"Wizard-based Initial Configuration of Basic Settings", if your SolMan system has not been yet configured or
"Standard Configuration of Basic Settings", if you have done already some configuration.
Best regards,
Ruediger Stoecker

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Where is a path for configuration SU_ROOT_GROUP?

Where is a path for configuration SU_ROOT_GROUP?
I want to config group of user who can su to root like in Hp, configuration file is /etc/default/security
Please help
Tan

Are you referring to the Wheel group or a role of root?
In solaris, you can assign a role of root. There is a /etc/user_attr file and associated /etc/security/prof_attr and /etc/security/auth_attr.
There is also a wheel group which limits the persons who can su - to the root user, but is generally used with a naming service such as NIS.

Menu path for Configuration TCodes

Hi
I want to know menu path for creating bank key (TCode is FI01).
Also i want to know how to find menu path for configuration TCodes.
For enduser transaction, we can find menu path using SEARCH_SAP_MENU

the path is
SAP Menu > Accounting > Financial Accounting > Banks > Master Data > Bank Master Record > Create
and for any Tcode Go to SE93 and f4
you will find the list of t codes with descriptions
Hope it will help
Bilal

I need recommendations for an emac 1.42 and ibook 1.33 compatible external superdrive ?

I need recommendations for an emac 1.42 and ibook 1.33, OS 10.3 - 10.5 compatible external superdrive ?

If you need the drive to be able to boot those Macs, you'll need FireWire connectivity. If you ned to use a system optical disk to upgrade or re-install the OS. or repair your hard drive, you must boot from the optical drive. If either computer's built-in optical drive has failed, or does not support reading DVDs, you'l need to boot from an external sooner or later.
If all you need is a burner, then USB opticals are cheaper and should work fine.
This firm tests all their stuff for Mac compatibility:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Price%7c0&Ne=5000&N =6866&Ntt=external+optical

Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

Hi, We have a Scenario as below:
Question1:
We have a multiprovider contains 4 infocubes and 2 Master Data objects
a.Demand
b.Inventory
c.Sales Orders
d.In Transit
Master Data objects
a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
We have another report which is the Inventory Report with the following details:
Material, Location, MRP Controllder, Calday, Base UOM, Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
Question2:
When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
Regards
Vijay

Hi,
I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
Regards
Prasad

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Need help for Flash quiz with score and timer

Greetings, I need to urgently create a flash
game with 10 questions, 3 answers per question. At the end of the
quiz I need to get the time the quiz was completed for, what answers the player answered correctly and the time its completed into a database, + a couple of fields like name and phone that the user fills also needed to be added into db with the score and time. I need it by the end of tomorrow and I do realise i dont have the knowledge to make it, So if there is anyone that wishes to help or trade services I can give you back the favour by creating some html/css/web design content for you. Thanks in advance and please excuse me for my terrible english.

download flash cs6 and use it to publish your ad or expand flash cc's publishing capabilites. if you have a flash cc subscription you can download and use flash cs6 after logging into your cc acount.
here's how to expand publishing capabilites of flash cc: http://forums.adobe.com/message/5511080#5511080#5511080

Make to Order for configurable Material Costing Procedure and Stage Trans.

Hello, PP Gurus,
I am doing one MTO for configurable Material.
For each sales order I am preparing Production order so when the costing should caried out?
What is the Order settlement & closing procedure?
how the cost is tranfered to the Sales orderand cost transfer is possible
Please inform me Costing procedure in this scenario and transaction.
Thanks & Regards,
Bhavik Dangi.

Hi,
You can use variant configuration for selling the colored fabric. Use the basic fabric as raw. and maintain variant configuarations to have many variants.
Please use strategy 25. When you run MRP the planned orders will be generated and will be assigned to the sales orders. You can see it on the account assignment tab.
In material master pleasse maintain Individual collective requirement indicator to 1-individual in the MRP-4 view.
Then the stocks will be reserved to the specific sales orders.
Thanks and regards
Murugesan

Need guidence for configuring personalised mail on...

Hi,
I have got a nokia 9500 i. I want to set up my personalised rediff mail id on this phone. I need help to configure the same on my cell phone.
Please help.....
Regards,
Colin David.
Ahmedabad,Gujarat.
India.

Hello krishna k ,
From the below links you will be able to learn more about SAP Business One and its potential future SMEs
https://websmp203.sap-ag.de/~sapidb/011000358700001014032007E/
https://websmp203.sap-ag.de/~sapidb/011000358700001014042007E/
Good luck.
Wilma wang
SAP Business One Forums team

Need the default configuration of map-class and policies for WAAS version 5.3.1.20

Do someone have the default configuraion cli of class-maps and policies for the WAAS version 5.3.1.20. I need this to compare with the configuration that I have in the network, I need the verify what have been changed.

I'm sure you figured this out already since it's been 9 months. But just in case someone needs this - you can restore the default policies if they don't show up. Device Groups -> AllWAASGroup and edit. There you will see a "Restore default Optimization Policies"

Need Help for configuring Floating static route in My ASA.

Hi All,
I need your support for doing a floating static route in My ASA.
I have tried this last time but i was not able to make it. But this time i have to Finish it.
Please find our network Diagram and configuration of ASA
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1 track 1
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1
route rOutside 0.0.0.0 0.0.0.0 3.3.3.3 10
route inside 10.10.4.0 255.255.255.0 10.10.3.1 1
route inside 10.10.8.0 255.255.255.0 10.10.3.1 1
route inside 10.10.9.0 255.255.255.0 10.10.3.1 1
route inside 10.10.15.0 255.255.255.0 10.10.3.1 1
route rOutside x.x.x.x 255.255.255.255 5.5.5.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.3.77 255.255.255.255 inside
http 10.10.8.157 255.255.255.255 inside
http 10.10.3.59 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 123
type echo protocol ipIcmpEcho 8.8.8.8 interface outside
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
crypto ipsec transform-set cpa esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map vpn_cpa 1 match address acl_cpavpn
crypto map vpn_cpa 1 set peer a.a.a.a
crypto map vpn_cpa 1 set transform-set abc
crypto map vpn_cpa 1 set security-association lifetime seconds 3600
crypto map vpn_cpa interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
track 1 rtr 123 reachability
telnet 10.10.3.77 255.255.255.255 inside
telnet 10.10.8.157 255.255.255.255 inside
telnet 10.10.3.61 255.255.255.255 inside
telnet timeout 500
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 10.10.3.14
webvpn
tunnel-group .a.a.a.a ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
smtp-server 10.10.5.11
prompt hostname context
Cryptochecksum:eea6e7b6efe5d1a180439658c3912942
: end
i think half of the configuration stil there in the ASA.
Diagram.
Thanks
Roopesh

You have missed the last command in your configuration, Please check it again
route ISP1 0.0.0.0 0.0.0.0 6.6.6.6 track 1
route ISP2 0.0.0.0 0.0.0.0 3.3.3.3
sla monitor 10
type echo protocol ipIcmpEcho 8.8.8.8 interface ISP1
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability
You can do NAT in same way, here the logical name of the interface will be different.
Share the result
Please rate any helpful posts.

Best practices for configure Rogue Detector AP and trunk port?

I'm using a 2504 controller. I dont have WCS.
My questions are about the best way to configure a Rogue Detector AP.
In my lab environment I setup the WLC with 2 APs. One AP was in local mode, and I put the other in Rogue Detector mode.
The Rogue Detector AP was connected to a trunk port on my switch. But the AP needed to get its IP address from the DHCP server running on the WLC. So I set the native vlan of the trunk port to be the vlan on which the WLC management interface resides. If the trunk port was not configured with a native vlan, the AP couldn't get an address through DHCP, nor could the AP communicate with the WLC. This makes sense because untagged traffic on the trunk port will be delivered to the native vlan. So I take it that the AP doesn't know how to tag frames.
Everything looked like it was working ok.
So I connected an autonomous AP (to be used as the rogue), and associated a wireless client to it. Sure enough it showed up on the WLC as a rogue AP, but it didn't say that it was connected on the wire. From the rogue client I was able to successfully ping the management interface of the WLC.
But the WLC never actually reported the rogue AP as being connected to the wired network.
So my questions are:
1. What is the correct configuration for the trunk port? Should it not be configured with a native vlan? If not, then I'm assuming the rogue detector AP will have to have a static IP address defined, and it would have to be told which vlan it's supposed to use to communicate with the WLC.
2. Assuming there is a rogue client associated with the rogue AP, how long should it reasonably take before it is determined that the rogue AP is connected to the wired network? I know this depends on if the rogue client is actually generating traffic, but in my lab environment I had the rogue client pinging the management interface of the WLC and still wasn't being picked up as an on-the-wire rogue.
Thanks for any input!!

#what's the autonomous AP's(as Rogue AP) Wired and Wireless MAC address?
it has to be +1 or -1 difference. If Wired MAC is x.x.x.x.x.05 and the wireless mac should be x.x.x.x.x.04 or 06. It is not going to detect if the difference is more than + 1 or - 1.
#Does the switch sees the Rogue AP's wired MAC on its MAC table.
Rogue Detector listens to ARPs to get all the Wired MAC info and forwards to WLC, It compares with Wireless MAC, if there is a +1 or -1 difference then it will be flagged as Rogue on wire. And the client that connected to it is also marked as found on wire.
Regards to Trunking, Only Native vlan matters per trunk link, just configure the right vlan as native and we're done.
It is not mandatory to keep the Rogue detector on Management vlan of wlc. It can also be on L3 vlan also as long as it can join the WLC to forward the learnt wired MACs.
So if we don't have +1, -1 difference on Rogues then you've to use RLDP which will work with your existing setup to find Rogue on wire. there's a performance hit when we use this feature on local mode APs.
Note: For AP join - AP can't understand Trunk, meaning if AP connected to Trunk it'll only talk to its native vlan irrespective of AP mode, however rogue detector listens to the Trunk port to learn MACs via ARPs from different VLANs and forwards to WLC using native vlan.

Need help for Scheduling a Spool file and FTP the file

I have one requirement like below...
1. Start Scheduling a job
2. Generate a Spool file (.csv file)
3. If Spool file generation is successful then start FTP the file
Else End job
4. After successful FTP process end the job.
We need to create a log file also for this job.
Can any body give some idea how will i proceed?
Thanks in advance.

Billy Verreynne wrote:
BluShadow wrote:
Chris' may be wrapped, but it includes the funky ability to query remote files directly in SQL due to it's use of pipelined functions. A feature I've also got in my own FTP package and very useful for monitoring logs on remote servers through our Apex applications. ;)Ditto - also rolled my own FTP package as doing wildcard file listing requires custom support depending on the type of FTP server you're dealing with. The text part of the responses differ (these are not RFC'ed) and makes parsing more complex than what it could have been.Yeah, the differing responses can be a pain, though fortunately they are far and few between. There was a bug in Chris' package in that it wasn't handling a two code response from a windows FTP server for one of the commands, but I emailed him and he fixed that. Not his fault, he didn't have a windows FTP server to test on at the time.
FTP is a pretty straight forward protocol and easy to wrap a PL/SQL package around (using <i>UTL_TCP</i>).Absolutely. and the RFC details almost everthing you need to handle. It was quite quick to knock up a package, similar to the code hoek has linked to.
I think there is a lot of common stuff that many of us do in this regard. Always wondered how well a proper GPL'ed open source project providing a PL/SQL development framework and libraries would do...I think there'd be a lot of arguments about what is the best way of doing things. :D

Need Paths For Configuration Apache 2.2 And Coldfusion MX7

Similar Messages

Maybe you are looking for