Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"

Need the REPORT based on CUSTOM DATA field.
Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.

Hi!
As far as I remember there is no such base report. So, you may try to create it using SDK or request it as custom enhancement from SAP.
If you want to create it using SDK, you can find the required data for report in CUSTOM_FIELDS table.
Regards,
Alex.

Similar Messages

  • Exchange rate should pick from TCURR based on custom date field added in MIGO

    Hi,
    In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
    Thanks & Regards
    Vinoth Kumar.M

    Hi Maniraj,
    This will a modification to existing system and it is not supported directly.
    There are 2 notes of SAP for modification of translation date of BKPF.
    SAP Note 574583 will activate a BADI kindly refer to it for details.
    http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
    There is another one but is appilcable if material ledger is active in the system
    Regards

  • R12: How to filter Open Item Revaluation Report based on GL Date

    Hi,
    Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

  • R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

    Hi,
    Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

  • Different calendar styles: seeded vs. custom date fields

    All,
    In several reports we prompt users to select an opportunity close date (seeded date field) that is within a given period of interest using a prompt on the close date field. The calendar style provides two buttons to select the starting and ending points. Then the user must select the refresh link to narrow the date range and then pick the first and second dates. This requires five clicks. Users find this cumbersome.
    In contrast, we have a couple of reports that use a custom date field and users are prompted to select a beginning and end date. For this custom date field the calendar style provides a calendar button that allows you to directly select the first and second date without having to filter the range of possible dates. This is obviously only two clicks and is preferred by users.
    Does anyone know how to get the "nice" date picker to apply to seeded date fields as in the first case?
    Thanks,
    Dan

    Of interest relating to file upload component to users : "Saving Uploaded Files Uploaded by the File Upload Component " Check the blog:
    http://blogs.sun.com/roller/page/divas

  • Filtering an EVDRE report based on a Data Value

    Everyone,
    I have a report that has accounts in the columns without expansion. I am capturing various status codes in one account and I need to know how to filter the report based on a data value that is retrieved from the database for this account.I am also using the EVdre sort functionality along with an EVSUB in the after range which  sub totals the Organization and Materials Dimensions in the rows.  When I try to use native Excel to filter  based on the value of the Status Code Account  the report will only sort the top section of the report. As soon as it hits the Subtotals it stops filtering. Is there a way to filter the report in EVDRE based on the data value that is returned from the database.
    The account that I want to filter on is Status Code. We can have two values in it either 10 = Submitted or 30 = Business Case. The users want to be able to filter the report to only show the status code of 10 (Submitted) for their Executives to review.
    Edited by: eleasha counts on Aug 3, 2011 12:22 PM

    Hi eleasha,
    I don't know if you will entertain FORMATRANGE.
    But you can use formatrange to hide those rows you donot want to see.
    You can use the CRITERIA as VALUE=<<anyvalue>> you want to verify and apply it on rows.
    You can set the PARAMETER value as ROWHEIGHT=0, and apply to ALL.
    Try this with the combinations you need to see.
    Hope this helps.
    Karthik AJ

  • Creating report based on master data

    Hi Guys,
    I want to create a specific report based on master data in BI cube. for example... a report which takes cost center and period as variable and display expenses for that period and cost center. This report I want to create for all cost center in BI database separately. any idea how can we do this?
    There are 2000 cost centers and I need to print/send 2000 reports one for every cost center.
    If I store all cost center in excel file, can it be easier?
    broadcasting and creating 2000 schedule - not option.
    Thanks..SM

    Hi  stuti misra,
    Create ONE Query with selection Cost Center and Period are inputs.
    Create text variables for Cost Center and Period and add in Query Description.
    After query execution you can see description based on selection in workbook or webtemplate.
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • XML Forms Builder: Sorting news based on a date field in a XML form

    Hi Experts
    I have a requirement and I am stuck up in finding a solution. I have a XML form and this has been mapped to a folder in KM. It publishes news. In the collection renderer settings there is an option to sort the news ascending or descending based on created/modified criteria.
    The requirement is to sort the news based on a date field in XML form. Can you experts help me in getting the solution for same?
    The users who post the news in our portal needs the information to be sorted based on a date field shown.
    Thank you
    Best regards
    Ramamoorthy D

    Hi Experts
    I have not got any solution for this issue. Can any of you get me some clue to work on this issue with sorting news based on a date field in a XML form?
    I removed the property link from the screen field Input field.
    Thank you
    Best Regards
    Ramamoorthy D

  • IW38 Traffic Light for Custom Date field

    Hi Experts,
    I am trying use the Reference Field for Monitor.  It has got 1. Priority, 2. Order/Start/End, 3. Scheduled Start/End.
    We have created a custom date field as Original start/Finish dates. I want to create traffic light based on this date.
    Can you please help me where and how to do this configuration. I have already searched the forum. But no help found.
    Thanks,
    Panneer

    Panneer,
    You can use Enhancement Spot ES_EAM_LIST_ENHANCEMENTS for this purpose (see SE18)
    PeteA

  • How to process reports with two different date fields

    Morning all,
    This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
    These two reports pull data from two different date fields and has different status check ups.
    Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
    Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
    The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
    I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
    Any ideas how to produce combined report which has two different date fields?
    Many thanks in advance
    Regards
    Jehanzeb
    What I

    Charliy,
    No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
    So its more like this:
    Klab->Max-Credit2--->Credit_date
    Sae->Maxmast->Order_header---Date entered.
    two dates totally different tables, dbs
    however, I will try your idea too and see if that works.
    Regards
    Jehanzeb

  • Inventory Report Based On Posting Date

    Hai All
    Can any one help me with the subject "Inventory Report Based On Posting Date"
    Please
    with regards
    Shankar

    hi,
    Visit this link,already answered.
    Difference between posting & system date in Inventory Audit Report
    Jeyakanthan

  • Workflow based on created date field in opportunity?

    Hi All,
    Can we write a workflow based on created date field in opportunity that if a opportunity record has not been modified after say 90 days,what will be the workflow syntax.
    I just want an email notification to owner and owner's manager.
    Thanks in advance,
    Manish.

    I think you can use the WAIT workflow using Duration('P90D') then Send Email, triggering it upon save and upon modification. Make sure that the Re-evaluate Rule Conditions After Wait option is checked so that the previous WAIT would be reset upon modification.
    Edited by: marcocollado on Aug 31, 2012 5:57 AM

  • Custom Date Field not showing up in Pages Inspector

    I created a custom date field in Address Book and now want to merge info from Address Book into a Pages template I created (including this new custom date field). When I go to the Inspector to add the custom date field to the template, it is not listed as a field - only Anniversary and Birthday are listed as "other" fields.
    How do I get the custom date field to show up in the inspector?
    Chris

    Question asked and responded several times.
    The Help is unaware of the true program behaviour.
    In version 3, custom AddressBook fields are not usable in Pages.
    _Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Yvan KOENIG (from FRANCE samedi 8 novembre 2008 18:13:21)

  • Authorizations for WEBI report based on BPC data model

    Hi All,
    We are strugelling with setting up authorisations for the reporting on BPC data model.
    We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
    We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
    We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
    Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
    Kasia

    Anybody can help with this issue please?

  • Create report based on JSON data

    Dear All,
    I'm on Oracle APEX 4.1 and Oracle 11g. I'm receiving JSON data in my application and would like to print report based on JSON data without storing it in any table.
    Can you please suggest best way to achieve it?
    Regards,
    Chintan

    Hi,
    in 4.1 you can for example use the open source PL/JSON library (http://sourceforge.net/projects/pljson/) to parse JSON.
    In APEX 5.0, we currently plan to add a JSON API package that e.g. can be used to convert JSON to XML. Here is an example:
    SQL> select col1, col2
      2  from xmltable (
      3      '/json/row'
      4      passing apex_json.parse('[{"col1": 1, "col2": "hello"},{"col1": 2, "col2": "world"}]')
      5      columns
      6          col1 number path '/row/col1',
      7          col2 varchar2(5) path '/row/col2' );
                    COL1 COL2
                       1 hello
                       2 world
    At the last OOW, it was also announced that the RDBMS will provide native support. That should be the preferred option in the future.
    Regards,
    Christian

Maybe you are looking for