Need Selection variable name for "System Year - 1"
Hi All,
I have Fiscal Year field in the selection screen of a custom program. The value of this field comes from system variable.
I need to create a variant where this fiscal year should have the value "Current year - 1".
This has to be done using Selection Variable. Currently there is no such variable in the F4 help (TVARV table).
Please tell me if there is a way to get such a selection variable...
Hi Tolga,
The selection screen parameter is defined as:
parameters: p_gjahr type gjahr obligatory memory id gjr,
I cannot use the FM in the AT SELECTION SCREEN ON VALUE-REQUEST.
When you create a variant for the program.. click button "Variant Attributes" - Here the checkbox for Selection variable is ticked for this field. Now click "Selection Variables". here we can provide the variable name which comes from TVARV table.
I need this Selection variable. I am not allowed to do any program changes.
Similar Messages
-
JDBC Problem: "select * from NAMES for update of FIRSTNAME"
I am using Oracle 8 and JDBC thin driver. Is there any reason
why when I try to use the statement:
"select * from NAMES for update of FIRSTNAME"
it does NOT work in JDBC?
However when I do the statement in SQL-Plus it works fine.
If anyone has used this statement with success, please let me
know that it actually works, so that I know there is something
wrong with me!
Any code snippets would be very helpful.
Could it be the thin driver?
Please help! Thanks in advance.
nullThomas Gutzmann (guest) wrote:
: James,
: for this command you need transactional control, which is not
: possible with JDBC - if I'm not wrong. You can circumvent it
with
: something like:
: select x into vOld from t where id=4711;
: vNew := 0.815;
: update t set x = vNew where id = 4711 and x = vOld;
: Another option would be to write a stored PL/SQL procedure that
: runs the whole transaction.
: Cheers
: Thomas
: James Ward (guest) wrote:
: : I am using Oracle 8 and JDBC thin driver. Is there any
reason
: : why when I try to use the statement:
: : "select * from NAMES for update of FIRSTNAME"
: : it does NOT work in JDBC?
: : However when I do the statement in SQL-Plus it works fine.
: : If anyone has used this statement with success, please let me
: : know that it actually works, so that I know there is
something
: : wrong with me!
: : Any code snippets would be very helpful.
: : Could it be the thin driver?
: : Please help! Thanks in advance.
I don't think this is correct. I have used select for update
with no problems. you can send a "set transaction control"
via sql, I believe, but you shouldn't need to do so...
Maureen
null -
Table Name for System Messages
Dear all,
i want to know the Table name for system messages
Reg
Krishello Hari,
I am getting error's in Posting like:
Error in posting
Message no. ICC_TR119
Diagnosis
The system could not post any checks or bills of exchange.
Procedure
See the table with the system messages. -
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish -
Do I need to register online for 1 year warranty?
Do I need to register online for 1 year warranty?
Not for the original - comes with the device - warranty. That said, if you do register then if you lose the receipt down the line, Apple already has a record of you and your device. IIRC, when I purchased the Apple Care extended one I did have to register that with Apple.
-
System variable name for email field.
Hi
Can anyone give me the system name for the email field,
eg username is &APP_USER.
Thanks
FionaFiona - John's suggestion is to use a PL/SQL API call to get the email_address attribute from the wwv_flow_users record for a user account. There is no corresponding substitution string but you could create an item in your application and set it using this API. Keep in mind that this applies only to APEX user accounts, i.e., if you're using other authentication methods such as LDAP, SSO, Database Account, or custom tables, then the email_address will not be accessible using the API.
Scott -
Need help generating variable name for timeout object
Below is a function I am using to scale an object down and
then hide it. It works fine on just one object, but if I try to run
it on multiple objects at the same time, only the last object gets
scaled down. I believe this is because the timeout list only ever
has a single item in it, “ShrinkTimeOut”.
Does each entity in the timeout list need a distinct name?
And if so, how would I dynamically generate a name and save it so I
can kill the timeout object once the object has scaled down fully?> Does it look like I am getting rid of the timeout object
properly in my code?
Now that you mention it, and I have a look, no - it doesn't:
//not sure of the order of parameters here:
function fShrinkLoop(mModel, aTimeout) {
//Creates a variable that contains the vector value of the
model's
scale (vector( 1.0000, 1.0000, 1.0000 )).
nScaleVector = mModel.getPropRef("transform").scale;
//Checks to see if the model is 1% or less than its original
size.
if (nScaleVector[1]<=0.01) {
//Makes the model invisible.
mModel.visibility = symbol("none");
//Kills the timeout object.
aTimeout.forget();
} else {
//If it is not, we scale the model down further and allow
the loop to
repeat.
mModel.scale(0.9); -
Selection Variables / Name of the Variable in a Variant
Hi,
I am trying to replicate / create the same variant from PRD back to DEV.
But in PRD for the variant, there are values for attributes. (Selection Variable is having T and D)
Number of variables are available for Name of the variable (f4 values)
But these values are not available for the same variant in DEV.
How can i bring the values for selection variables and name of the variables in DEV.
Thanks in advance for your help.
Regards,
RaviRavi,
you have to include the variant into a transport request than you can transport to the other system. In general, variants not transported automatically when you create a program, you have to include the variant into the request if you want to use in another system also.
You can do this by:
SE38 --> Variants --> Utilities --> Transport request
Edited by: mrwhite on Apr 28, 2009 4:52 PM -
Custome variable exit for fiscal year/period
Hello BW Gurus,
Q1[1,2,3] Q2[4,5,6] Q3[7,8,9] Q4[10,11,12] quarterly periods
I have a custom variable exit as shown for fiscal year period
IF LOC_VAR_RANGE-LOW+4(3) =< '003'.
L_S_RANGE-LOW+4(3) = '001'.
ELSEIF LOC_VAR_RANGE-LOW+4(3) > '003' AND
LOC_VAR_RANGE-LOW+4(3) =<'006'.
L_S_RANGE-LOW+4(3) = '004'.
ELSEIF LOC_VAR_RANGE-LOW+4(3) > '006' AND
LOC_VAR_RANGE-LOW+4(3) =< '009'.
L_S_RANGE-LOW+4(3) = '007'.
ELSE.
L_S_RANGE-LOW+4(3) = '010'.
ENDIF.
Now this works fine to give me the Current Quarter ....say if user puts 005/2007 i get the data Current quarter as [4+ 5] i.e. April and MAy data. Now for <b>Previous Period</b> I gave an offset as -3 to -1 inorder to get data for Q1[123] but the requirement is changed and I want the same time period i.e. [1+2] and not the entire quarter since the Current Quarter calculates only for 4 and 5.
I hope u are getting my point....please give your suggestions will reciprocate with lots of pointsHi gaurav,
Basically If I am selecting period 005 I am getting the data for 4 and 5 as Current Quarter i.e. April is the starting period of that Q2.
Similarly the previous Quarter should also give me data for period 1 and period 2.
Right now the offset I gave is -3 to -1 on my custom variable so i am getting data for the entire previous quarter which is Q1[1,2,3] but in reality i just want data for period 1and period 2.
Can you please help me in this
Appreciate your concern
Thanks -
Need a program name for a Batchjob
Hi Folks,
In our current process, the deliveries are taken from picking duelist (VL06O)and the transfer order is created manually. Now we want to automate this process. I know that it can be done by a batch job.
Could some one tell me the program that should be used in the batch job which takes the delivery numbers from picking duelist and creates transfer orders?
Points rewarded.
Regards,
KrishnaI think you don't have to worry about program names. Just click <...in the background> button above selection screen and the system will create automatically a job for you
-
Dynamic Variable name (for int/long) from a String variable
Hi,
I want to give a int/long variable name from a String.
for ex.
String str = lookup + "Id";
lookup is a String variable coming from XML. Now, for instance lookup="name". So str = "nameId".
Now I want to create a int/long variable by nameId.
Could anybody tell me the way how to do. Please don't tell to use MAP.
Edited by: Shah on Dec 5, 2007 3:26 PMWell you can't. Use a Map.
The compiler translates variable names into slot numbers, either within an object or withing the local "stack frame" and these slot numbers are assigned names at compile time. No new slots can be created at run time. Java is not Basic.
Reflection allows you to find existing field names and methods (not local variables), so it's possible to map, for example, XML attribute names to field names or setters in an object but the names have to be known at compile time. -
Using variable name for Netstream Publish() (actionscript)
Relatively new to Actionscript. In the netstream publish() or play() methods, can I pass variable names to the methods instead of hard-coding the stream name?
Example:
private function publishLiveStream():void
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
ns.client = this;
// blah blah other stuff...
ns.publish("thefilename", "record");
I want to replace "thefilename" with a value passed from an input box or use dynamic naming (i.e. current date & time).you can use in procedure using sunopisis technology
OdiExportMaster "-TODIR=/temp/" "-ZIPFILE_NAME=export.zip" "-XML_CHARSET=ISO-8859-1" "-JAVA_CHARSET=ISO8859_1" "-EXPORT_VERSIONS=YES"
or you can use (unix System)
OdiExportMaster "-TODIR=/#v_FileName" "-ZIPFILE_NAME=export.zip" "-XML_CHARSET=ISO-8859-1" "-JAVA_CHARSET=ISO8859_1" "-EXPORT_VERSIONS=YES"
Hope it will work
Thanks -
How can I get actual table name for Bom_Bo_Pub.Bom_Revision_Tbl_Type? I am trying to confirm if this particular table has a "REVISION_LABEL" column in 11.5.9.
Duplicate post.
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev
Need to know actual table name for actual table name for Bom_Bo_Pub.Bom_Rev -
I need STANDARD Scripts names for SD, MM, PP, and some others
hi
i need the standard script names for sd mm and pp
and also others modules
please send atleast 6 names
with some details
and key points
thanks in advanceHi,
Purchase Orders ---> MEDRUCK
Invoice Reduction -
> MR_REKL
Sales Summary -
> SD-SALES-SUMMARY
Packing list -
> SD_PACKING_LIST
Goods Issue Slip ---> WASCHEIN
don't forget to reward points.
Regards,
azaz ali. -
Find the program which retrive the program name for 2 years.
Hi Team,
i have requirement like , i am working on BRITVIC Client , they want to me write a program which has retrive the all development Z program name for last 2 years.
could you please suggest me the standard program which has retrived all program name for last 2 years.
Thanks in Advance.
puneet.Hi,
go to table EUDB - Development Environment Objects
see the program name NAME as putting Z*
where DATUM is the creation date
ZEIT is the creation time
also you can go for table REPOSRC - Report Source Code
Arunima
Edited by: Arunima Rudra on Nov 18, 2008 3:44 PM
Maybe you are looking for
-
Was just thinking a few days ago...Apple never made an ad in which all their products or at least some of their most renowned products are being used by 1 person in a day in different situations he faces...from using an iPod for jogging n then the gu
-
Days Of Supply (DOS)
All, One of the SAP's xApps Analytics Composite Applications for SCM included in 2004s is the Global Inventory View. One of the metrics offered within the application is the actual Days of Supply (DOS). From documentation I see that it is displayed
-
Can you embed a web link in a QT mov ?
Wondering if this possible and looking for directions. thanks, Al
-
Discoverer 4i: GL Query caused no data to be received
Hi, E-Business 11.5.10.2 on Windows Server 2003 SP2 Discoverer 4i I've set up Discoverer 4i and am currently using Discoverer Desktop to query the business areas. I can retrieve data from any business area apart from GL. When I attempt to query GL I
-
Unable to add special characters such as # and ( in headers of Report in Text format
Hi, I am working on developing a report that will be exported to tab delimited text format from SSRS. The Report has been developed and it is getting exported to tab delimited text format. However, special characters in the heading are getting trimme