Need solution for multiple Firewire needs
My new 27" 2011 imac will arrive next Monday. I'm now trying to define and solve all potential hurdles.
I seek recommendations on how to best solve my need to attach 2 original firewire cables, into this imac that only comes with 1 firewire 800 input. Both connectors are critical to my work. One connector will turn hard to the right for about six feet to connect to my Digi02 audio interface. The other cable connects and turns hard to the left for 15 feet to connect to my Epson 2200 art printer. Both of the outboard equipment need the original firewire.
I have considered daisy chaining the audio interface and the printer. Except they are on opposite sides of my studio, and I prefer NOT to use a 25 foot firewire cable between such critical peices of hardware.
A better possibility may be a firewire hub, although it will probably also need adaptors for the different versions of firewire i need. That seems rather inelegant. Another possibility would be to get one USB to firewire adaptor and one firewire to 800 adaptor. Do these USB to firewire adaptors work OK?
Anyway, which of these methods would you recommend as my best choice? Are there other choices i haven't mentioned here?
The guy is totally correctin his review.
That is how FireWire works. The FireWire bus will run only as fast as the slowest device on the bus. So as soon as plug in a FW400 device, everything is then clocked down to 400FW.
If you need to have both FW800 and FW400 devices running at their native speeds you need two FW busses each with their own controller.
Because of the limited expansion capability of the iMac, I don't see any way for you to get around this limitation.
If you get a Mac Pro then you could use a FW PCIe card for the second bus and controller.
Allan
Similar Messages
-
Desperately need solution for multiple menus
I'm using Dreamweaver 8 and am using only CSS for layout and
controlling all the page elements. One thing I've never found any
instruction books it is naming conventions when you're using
multiple menus on a page. I give all my menus unique IDs and that
seems to work so far BUT I've run into a problem now and have
worked on fixes for about five hours. I'm completely baffled and
wonder if there is a CSS was out there who can help out.
The first 3 navigation menus appear properly and there are no
problems. This page has the first three menus:
http://www.aexcea.com/ANGELA/indexTest.html
. It even worked fine when I did the header and footer as a PHP
include:
http://www.aexcea.com/ANGELA/indexTestIncludes.php
So far, so good.
Now I had to add a left navigation bar for the client and
that's when all hell broke loose:
http://www.aexcea.com/ANGELA/TemplateLeftNav.php
4th menu
added
The fourth menu works but now the first three menus are going
crazy. They don't display properly in Firefox and in IE they're
jumping all over the place with the mouse overs. I've changed the
names of all the menus so they are completely different from each
other, I tried them as DIV ID, as SPan classes, as a combination of
the two, I took out the PHP include, put the 4th menu CSS in its
own file and I've studied the stylesheets till I'm bug-eyed, and I
have no idea why it's acting this way.
I'm including the stylesheets below with the relevant code
and the HTML for the page were all 4 menus will be at the end.
I'm at the end of my rope and I'm desperately hoping somebody
can help. Also if anybody can shed some light on the standard
naming conventions for multiple menus I'd be very grateful.
TataniaThe guy is totally correctin his review.
That is how FireWire works. The FireWire bus will run only as fast as the slowest device on the bus. So as soon as plug in a FW400 device, everything is then clocked down to 400FW.
If you need to have both FW800 and FW400 devices running at their native speeds you need two FW busses each with their own controller.
Because of the limited expansion capability of the iMac, I don't see any way for you to get around this limitation.
If you get a Mac Pro then you could use a FW PCIe card for the second bus and controller.
Allan -
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
Need solution for opening multiple connection to server in parallel
Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venuhi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye -
Need Solutions for these Errors
<b>Hello Group !
How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
1.SID missing.
2.Idocs Missing or No Idocs arrived from source
System.
3.Errors in the source system
4.Missing messages at transfer rules or
Update rules.
5.Data sent but not received.
6.Errors in the source system.
Have a nice week end
VijayHi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar -
Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows
When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed). -
Need solution for a Reporting Requirement
Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry Invoice Number Due Date Amount
8111 IV1 13/04/2011 1000
8111 IV2 17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry Week End date AR Amount due
8111 12/04/2010 0
8111 19/04/2010 1000
8111 26/04/2010 2000
8111 03/05/2010 2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
VipulHi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards. -
I need solution for this query
hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please sendhi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN -
Solution for IPS/HA needed.
Hi,
I need some help here.
I have to integrate an IPS into an existent redundant network. This network always has two redundant switch links. There is also a redundant pair of Checkpoint firewalls. I have to implement two ASA/IPS in front of these firewalls and keep the redundancy. I also need to use the transparent mode to reduce the implantation impact, and an active/standby failover mode.
So I decided to use the following physical topology (ignore the dots):
sw1--ips1--sw3--fw1
|....................|
|....................|
sw2--ips2--sw4--fw2
The problem with this topology is the L2 loop and STP. The SPT will block a port to avoid this loop. But the converged topology will have problems.
If the STP topology is like this one bellow, traffic from a host connect to sw1 to a host connected to sw2 will have to pass both IPS, including the standby unit.
sw1--ips1--sw3--fw1
|
|
sw2--ips2--sw4--fw2
On other side, if the STP topology is like this one bellow, traffic from fw1 to fw2 will have to pass both IPS, including the standby unit.
sw1--ips1--sw3--fw1
|
|
sw2--ips2--sw4--fw2
Moreover, if the STP topology is like one of the two bellow, I can force the topology to direct traffic to the active IPS. But the STP topology should change, if the active IPS fail.
sw1--ips1 sw3--fw1
|.......................|
|.......................|
sw2--ips2--sw4--fw2
sw1--ips1--sw3--fw1
|......................|
|......................|
sw2--ips2 sw4--fw2
Am I missing anything here? Is there any other solution for HA/IPS?
Any comment will be appreciated.
Paulo Roque
Network Engineer
SPCBrasilThx Robert.
I have considered a solution similar to yours, but a question raised from that solution: if I issue a 'no failover active' command to force the standby unit to become active, the STP topology should also be modified to make the traffic pass thru the new active ASA.
This STP topology change will not be automatic. And even worst, this will never happen in a situation were the ASA fails over by other reason. -
Need solutions for Budget, Landed cost and difference in 2005b and 2007B
Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
ShashiThankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi -
Xserve raid brocade switch, do I need xsan for multiple xserve raid with one gbic hba?
So I have 3 xserve raids. I would like to mount all 6 volumes on a single server with a 2 port hba. I have a brocade silkworm 3200, however the raid volumes will not mount. The only thing I can think of is do i need xsan to accomplish this? Initially I gathered it would be like additional resources on a normally data switch bu that does not seem to be the case.
Thanks in advance for any assistance.No, you don't need XSAN for this. XSAN is for connecting one or more RAID units to more than one host. Since you only have one host, XSAN isn't an issue.
You may need to look more closely at the switch configuration. Mac OS X doesn't support multipath (at least last time I checked), so you'll need to make sure that you're either using just one link from the server, or that you've setup zoning in the switch so that each link from the server sees a subset of the RAID volumes (e.g. three RAID volumes mapped to each link to the server).
You may also need to check the RAID configurations to make sure you're not using LUN masking (a feature of earlier firmware versions).
One test here would be to connect the server directly to each RAID controller in turn and see if you see the appropriate volumes. The chances are you do, which points back to the switch configuration being the issue. -
i want solution for shape & append query as run in access for oracle
RS.Open "SHAPE {select ID,MAX(Module_Name) AS MainMenu from USER_MODULE GROUP BY ID} APPEND ({select ID,NAME,USER_module.srno,iif(right(param_str,1)='P','ü','') as Allow,iif(left(param_str,1)='A','ü','') as Ins,iif(MID(param_str,2,1)='E','ü','') as Edit,iif(MID(param_str,3,1) = 'D','ü','') as Del,flag,CODE,NAME from USER_MODULE left join user1 on user1.srno=USER_module.srno where user_name='" & Master_Rst!USER_NAME & "' or user_name is null} RELATE ID TO ID) AS AA", G_CompCn, adOpenDynamic, adLockOptimisticIf you are in migration from one DB to other - you should not go with one to one convertion.
First understand the business requirment - whats working and how is it working and whats expected out of your new code etc.
Then decide what to place and how using your new DB.
There might not be one to one exact match in all DBs.
Simple example if you find any connect by prior in oracle - can you replace it with simple SQL command in ACCESS / SQL SERVER as it is without any functions? -
Need solution for dynamic pick lists in Crystal Reports
Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?
Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten -
In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.ADownload correct version from Microsoft Update Catalog. Run it with elevated rights.
M. -
Need a solution for multiple sites and multiple cameras
Hello,
I have a customer who has 3 different sites all in different locations. They are not connected through VPN however they do have a terminal server at the main location. They have 6 cameras total, 2 at each location. They are looking for a way to be able to connect all of these cameras to a centeral location (i.e. website, server, ect.) so that all 6 cameras can be viewed on the same screen by different users who would be given access. I am looking for the best solution working with a tight budget. Let me know your ideas and how you would implement it.
Thanks!Ben,
Normally when you have multiple cameras you would log into the web interface and change the http port of at least one of them. The default port is 80. We normally would change one camera to use http port 1024 and the second 1025. Then you simply forward port 1024 to the first camera and 1025 to the second in the router. Just remember that when you attempt to access the cameras after you change the port it will look like this: :1024">http://:1024 (locally and remotely) Please reply if you have further questions.
Maybe you are looking for
-
How to set up multiple monitors
I got a 27" 3.1 gz Imac for Christmas. I need to run multiple monitors on it. #1 How many monitors will it support? #2 How do I hook them up to the Imac? #3 What hardware do I need in order to do this? Phillip
-
I didn't know I was using a trial version of PDF files and now I can't do anything with them and I keep getting a notice for the 2015 version as I have the 2014 cc. If I have to purchase the 2015, will it be the download version or will I get the sof
-
Trying to share an XP printer in OSX
Hi, Been messing with this for a while. I've got a Canon MP160 that is connected to an XP machine via USB. The XP is connected to the wifi router, as is the iMac. I've set the workgroup the same in the WINS section. I can get files off the machine, a
-
Is it possible to close the lid and have the DVD playing continue when theto the mini DVI port is connected to an external display device?? Thanks Lewis
-
Hooking up sound modules through MIDI Controllers
I have an Axiom 25 MIDI Controller and an Alesis QSR sound module. how can i hook the module up to the axiom then get the sounds out through garageband. I did this once years ago and i just can't remember for the life of me. I have instrument cable