Need some help with a small issue.

Im running my computer with a K8T Neo2, a Gigabyte Maya II R9700Pro, and 4x512 400 Mhz memorys (Unsure about the label.).
Recently i also purshased & installed a Creative X-Fi Platinum (Togheter with the sound system i bought a few days earlier.)
Also, at first i was just using 2x 512 RAM (Might be worth mentioning >.>).
Well, the problem is that for some unknown reason my screen goes wierd all of the sudden, I've tried all the "usuall" solutions (Re-installing the graphic drivers.. flashing the Bios, re-installed windows twice...etc etc.)
Ah, a picture says more then i can... http://img166.imageshack.us/img166/921/issuevn5.jpg
(Yes the lines appears to be blue while in the browser, but on the desktop they are red.
Everything was working just fine, untill a few weeks ago when the lines appeard for a short period of time, and all i had to do was start a game (Like World Of Warcraft), for them to dissapear.
But they keept appearing more and more often, and it became harder and harder to get rid of them.
(Now i got them permanently).
I've removed all the components in the computer atleast twice, and put them back in place.
It didnt help at all.
The PSU im using was kinda cheap (Some cheap 520w i bought to be sure it would be able to hold my system when i whent over to AMD64.), but its been working just fine untill recently so i kinda doubt that is the problem.
My first guess was the graphic card offcourse, Ive had it sinch 2k4 (i think...) and its been working "flawless" (Except for the issuess with AGP 8x), untill now. (Also tried it in another computer, it was working fine, atleast for the time we ran it.)
My 2nd guess was the heat, so i connected all the fans and pulled them up to maximum efficency So now i cant get it above 45 degrees. But this didnt help either.
So now im asking around if anyone knows what the problem is.

First off the Cheap PSU may be the cause. Look at the lable and make sure you have at least 24a on the 12v rail.
Second run Memtest86 and make sure your RAM is passing all tests several times.
Drop any Overclock you may have.
Make sure that you have the right Bios version for your CPU. The 3.x versions are for Clawhammers, Newcastles, and Winchesters. All other cores use 9.x Bios's. An X2 or dual core opteron should use 9.3.
Make sure you try setting 2T command rate as you have 4 sticks of RAM and most A64's will not handle 1T command rates when using more than 2 sticks.
Make sure both the front and rear case fans are operating.
Hopefully this is a clean install of Windows but if it isn't you are making your own troubles.
Oh and yah... POST COMPLETE SPECS... We aren't mind readers you know...

Similar Messages

  • I need some help with my GPS issue

    I'm writing to ask you if You could somehow help me solve my GPS issue. I own Nokia 5800 XpressMusic. I've recently updated it's software and installed the new OVI Maps. I know that there is an option to use it offline which means without an Internet connection. When I start the Maps application and choose the offline mode, the only thing that appears at the top of the screen is "Searching position". The map is available but my position can't be specified without Internet on. When I turn my wireless router on, even though my maps are set in offline mode, it automatically connects to the Internet and spends something like 5KB download. If I keep navigating it spends even more. I've left my mobile phone offline to search for my position for an about half an hour but nothing happened. So, my question is, could you tell me what to do and how to use OVI Maps offline?

    Assuming you are useing Maps 3.06 from beta labs and the map data is the latest compatible maps installed through ovi suite, then all should work well provided you followed the installation instructions correctly. If you don't use assisted gps or any other method of positioning except integrated Gps then you need to be in an open space with clear view of the sky to allow the GPS antenna to get a lock, this can take 10 to 30 minutes (the first time you try for a lock, shouldn't take that long again) and once you have a lock the location should work fine. The reason the other methods are available is thet they speed up the whole process and also work when in built up areas where buildings can block thre satelite view from the gps antenna. The amount of data used to lock your position is minimal and unless you have zero data allowance I suggest using all the positioning methods. If using the navigation abroad, you can disable evrything and simply use integrated GPS as long as you've loaded the local map data to your phone previously.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Brand new to the Mac World and NEED SOME HELP with startup disk issues

    Hello everyone. I am a new Mac user and I purchased my mac on ebay. It's an iMac that came with tiger 10.4.11. I wanted to get a fresh start on the computer, since the person who had it before me did not erase all of his stuff. I didn't know what to do so I got a startup disk/install disk off ebay also. When I go to install it says "software cannot be installed on this computer." Before I bought the software, I had called the apple store and they said it should be fine to buy any install software to put on the computer. If I could get any help it would be appreciated. I had read previous threads that I should hold down c when I start up (didn't work) or that I should select archive or erase and install (I never got these options when I went to install).

    A warm welcome to the Discussions!
    What iMac is it? I only ask as the Retail Tiger CD/DVDs don't work on IntelMacs, only PPC, (G3, G4, G5 Macs).
    Sorry what you were told by the Apple Store, but if it's a Gray CD/DVD then it is Machine specific as Neil stated.
    Sooo, what exact iMac is it, and what does it say on the CD/DVD?

  • Need some help with billing password issue !!???

    Hello...I am in a bit of a situation.  My mother just passed away and I have her phone and am trying to get to the billing detail, but I do not have the billing password, and apparently it is different from the soc sec numbers....any ideas of what I can do to get it reset?

    Bring a death certificate into your local Verizon store and have them help you get a copy of the bill so you can pay it.

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with region position

    Hi,
    I need som help with regions position....
    Background:
    I have 2 regions, I will call them reg1, reg2 and reg3.
    reg1 = Page Template Body (2. items below region content), column 1, search region.
    reg2 = Page Template Body (2. items below region content), column 2, import file region.
    reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
    Issue with the position, the setup explained makes my layout like this
    reg1--------------------------------reg2
    ------------------reg3--------------------
    What I want:
    reg1-reg2
    ------------------reg3--------------------
    What am I doing wrong?
    Regards Daniel

    Daniel,
    this will also work:
    Region1 HTML table cell attributes
    width="10%"
    Region2 HTML table cell attributes
    align="left"
    without touching the page template.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Need some help with threads...

    Hello all,
    I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
    I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
    package playingwiththreads1;
    import java.io.*;*
    *public class PlayingWithThreads1 {*
    public static void main(String[] args) {*
    * PipedOutputStream outputPipe = new PipedOutputStream();*
    * ObjectOutputStream oos = null;*
    * ReceiverThread rt = new ReceiverThread(outputPipe);*
    // Start the thread -- First try*
    * Thread t = new Thread(rt);*
    t.start();*
    // Wrap the output pipe with an ObjectOutputStream*
    try*
    oos = new ObjectOutputStream(outputPipe);*
    catch (IOException e)*
    System.out.println(e);*
    // Start the thread -- Second try*
    //Thread t = new Thread(rt);*
    //t.start();*
    /** Send an object over the pipe. In reality this object will be a
    class that contains control or status information */
    try
    if (!oos.equals(null))
    oos.writeObject(new String ("Test"));
    catch (IOException e)
    try
    Thread.sleep(5000);
    catch (InterruptedException e)
    I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
    System.out.println("Thread initialization - start");
    try
    inputPipe.connect(outputPipe);
    inputObject = new ObjectInputStream(inputPipe);
    catch (IOException e)
    System.out.println(e);
    System.out.println("Thread initialization - complete");
    public void run()
    System.out.println("Thread started");
    try
    if (inputObject.available() > 0)
    System.out.println(inputObject.read());
    catch (IOException e)
    System.out.println(e);
    Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
    Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
    Many thanks in advance,
    Rob Hix
    Edited by: RobertHix on Oct 6, 2009 3:54 AM

    Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
    Here is a better look at the code since I was helped to figure out how to insert it:
    The main method:
    package playingwiththreads1;
    import java.io.*;
    public class PlayingWithThreads1 {
        public static void main(String[] args) {
            PipedOutputStream outputPipe = new PipedOutputStream();
            ObjectOutputStream oos = null;
            ReceiverThread rt = new ReceiverThread(outputPipe);
            // Start the thread -- First try
            //Thread t = new Thread(rt);
            //t.start();
            // Wrap the output pipe with an ObjectOutputStream
            try
                oos = new ObjectOutputStream(outputPipe);
                oos.flush();
            catch (IOException e)
                System.out.println(e);
            // Start the thread -- Second try
            Thread t = new Thread(rt);
            t.start();
            /* Send an object over the pipe.  In reality this object will be a
             * class that contains control or status information */
            try
                if (!oos.equals(null))
                    oos.writeObject(new String ("Test"));
                    oos.flush();
            catch (IOException e)
                System.out.pringln(e);
            try
                Thread.sleep(5000);
            catch (InterruptedException e)
    }The thread code:
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
        private PipedInputStream inputPipe = new PipedInputStream();
        private ObjectInputStream inputObject;
        ReceiverThread (PipedOutputStream outputPipe)
            System.out.println("Thread initialization - start");
            try
                inputPipe.connect(outputPipe);
                inputObject = new ObjectInputStream(inputPipe);
            catch (IOException e)
                System.out.println(e);
            System.out.println("Thread initialization - complete");
        public void run()
            System.out.println("Thread started");
            try
                if (inputObject.available() > 0)
                    System.out.println(inputObject.read());
            catch (IOException e)
                System.out.println(e);
    }Does anyone else have and ideas?

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

  • Need some help with MDX formula

    Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
    (MEASURES.[SIGNEDDATA],
    CLOSINGPERIOD([%TIMEDIM%].
    [%TIMEBASELEVEL%]))

    If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try  etools->client Options-> Clear Local application information .
    Formula 2 : 
    (MEASURES.SIGNEDDATA,
    CLOSINGPERIOD(%TIMEDIM%.
    %TIMEBASELEVEL%))
    This formula is used to retrieve AST & LEQ account values.
    If current time member is at monthlevel ,ie  ClosingPeriod of  2011.FEB is  the current member it self ,and would retrieve 2011.FEB value.
    If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar  ,and would retrieve 2011.MAR value.
    If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC  ,and would retrieve 2011.DEC value.
    Formula 1 :
    MEASURES.SIGNEDDATA
    Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
    if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
    if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR)  value is retrieved.
    if current time  member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC)  value is retrieved.
    Hope this helps.

  • Need some help with computation

    Hi, I need some help with the following:
    My page 3 is a form thats shows, among other things, a document ID (:P3_DOC_ID). Next to this item I have created a button that calls a document selection form (page 10).
    On selection this forms sets 2 items:
    P10_SELECTED (Y or N)
    P10_DOC_ID (the selected documents ID value)
    When the user selects a document he returns to the calling form.
    On page 3 I now try to capture the selected values. For a test item I managed to do this by defining this items source as:
    [PL/SQL function body]
    begin
    if V('P10_SELECTED') = 'Y'
    then
    return V('P10_DOC_ID'); -- selected value
    else
    return V('P3_TEST'); -- else the original value
    end if;
    end;
    However I want P3_DOC_ID to capture the selected value. I tried using a computation but that did not work. Any ideas?
    thanks Rene

    You might want to check if the "Source Used" attribute for P3_DOC_ID is set to always or to "only when ..." it sounds like you need it set to "only when ..."
    If that does not work try this
    Place the following in a pl/sql anonymous block and turn off your
    computation.
    if :P10_SELECTED = 'Y'
    then
    :P3_DOC_ID := :P10_DOC_ID; -- selected value
    else
    :P3_DOC_ID := :P3_TEST; -- else the original value
    end if;
    Justin

Maybe you are looking for

  • How do I move my iweb site to another account?

    I have built my wife a web site on my computer on my .mac account using iweb. But I want to move it over to my wife's .mac account on her computer. Essentially to have it live on her computer and not mine. How do I do this? HELP! Thanks a million.

  • Broken itunes

    Something weird has happened to my itunes. I was running it this morning and it worked fine. once my instructor gave me some quicktime codecs for AVID, itunes would not open. Every time i try to open itunes, the program doesn't even run. when i click

  • How to close exe process!!!

    hi, I have opened exe files using Runtime.getRuntime method. i need to close using java. But how could i close which i opened exe files. thanks in advance sara.

  • Crash Report: Please help

    Hi there all. Not sure how to ask for help, but here goes anyway... I'm running a mid 2009 MBP, Mac OS X version 10.7.5. 2.26 GHz Intel Core 2 Duo. 4 GB 1333 MHz DDR3. My machine has constantly been crashing or freezing, especially if I run it withou

  • HT201413 I had Windows 7 64 bit then migrated to a new note computer with windows 8.1 64 bit.

    I had a notebook with Windows 7 64 bit then migrated to a new notebook with Wndows 8.1 64 bit. When I download iTunes all of my music is there but when I try to log onto the Itunes store I keep getting this message "iTunes has stopped working. Window