Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Similar Messages

Need some help with the autosave feature - Please!

Hello,
I started an animation in flash recently and the autosave feature was turned on. I had a good animation, but decided to play around with it a bit. After a little while, I decided to call it a night and exited the program making sure NOT to save my work. Upon opening that file the next time, I come to find out that Flash has autosaved my file while I was playing around. Now I have a worthless animation, and have to start from scratch. Is there any way to revert to a previous save, or autosave at this point, or am I about to do a lot of work again?
Thanks anyone who can help.

As far as I know, the autosave function isn't able to track down previous versions of the saved document - that calls for a specified version control system. I believe that Flash only saves the file if it is told to. There is a few ways to enable or disable autosave:
in the "New Document" dialog. you can choose to enable Auto-Save.
In the "Document properties" dialog you can set the checkmark.
If these are checked of, there isn't going to happen any auto saving. The problem may be, that there is also a topic called Auto-Recovery. Recovery and Save isn't the same when it comes to Flash, but people tend to think of them as the same. You set the Auto-Recovery feature in the Preferences under General.
Windows: Edit>Preferences : General>Auto-Recovery
Mac OS: Flash Professional>Preferences : General>Auto-Recovery
Both has a default of 10 minutes, and can therefore confuse he user. Please look at the document to make sure, that you haven't unset Auto-Recovery instead of Auto-Save. you can do that by:
Go to the preferences (Ctrl+U on Windows and Command+U on Mac OS) and check to see if Auto-Recovery is set.
Go to the documents properties (Ctrl+J on Windows and Command+J on Mac OS) and check to see if Auto-Save is set.
The first one (in the preferences) is ok to have set. It is the second one, that may have caused trouble for you.
/ockley

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with the Table Function Operator

I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Some help with the 10g install, please.

Hi,
We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
If someone could kindly read over some of our concerns, we'd appreciate it.
First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
Any help with steps would be very helpful to us. We're getting error messages like this:
The installation of Oracle Database 10g was successful, but some
optional configuration assistants failed, were cancelled or skipped.
Please check
'/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
for more details.
UnsatisfiedLinkError exception loading native library: njni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Thank you in advance for your help.

Hi,
You are installing in same ORACLE_HOME?
Your Operation System is UNIX?
Eder

Need some help with the samples

I am using CR for Visual Studio 2010. After installing CR and verifying the install per the developer guide, I down loaded the samples crsdk_net_samples_12.zip and loaded VB_Win_Data_DataSets.sln, electing to convert it from VS2008 to VS2010. After trying this several times, I could only get several error messages in the conversion log file.
I have read that it is easy to get these to work in VS 2010, but I can't find any instructions. The Crystal Reports for .NET SDK Samples download page has no readme file, or instructions or hints for conversion of these files into VS2010. I could not find samples created specifically for VS2010.
I must be missing something simple. Can you help me get some of these samples working in VS2010? I am interested in connecting to Collections in my program and to strongly types xml datasets. I plan to use filters and parameters and to use the ReportDocument Object Model. I could proceed without the samples -- but I am sure life would be a lot easier if I can get them to work and benefit from the good work that is there.
I could provide the log file. In part, it says:
Project: VB_Win_Data_DataSets Warning: this project requires Crystal Reports, which is no longer included with Visual Studio.
The converter (VS 2008 to VS2010) showed one error, converted 1 file, and did not convert 19 files.
Thanks

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with the PDF ActiveX!

I have an application that call a vi which will open a selected PDF file. during the first ran, the document will be properly open.But after that if i close the VI and recall them for another pdf document, I cannot open the file ( nothing happens....) or i have an error message:" Could not find Acrobat External window Handler.
How can I resolve this issue., because On my application I have 3 buttons to open 3 differents pdf file and i can only open the first file (corresponding to the selected button).
I will appreciate all your help on this point.
regards
Popo
Attachments:
Display_PDF.vi ‏77 KB

Popo,
Thank you for contacting National Instruments.
I was able to run two copies of your VI on my computer simultaneously without any problem. I was able to open different PDF files in each instance of the VI.
It is hard to say what is causing your problem. If you are using multiple instances of this VI in a top level VI, try making each instance a different file name. I noticed some odd behavior when using multiple instances with the same file name. This odd behavior was corrected by giving each instance a unique file name.
I hope this helps!
Matthew C
Applications Engineer
National Instruments

Holla, I need some help with the mess I have created on my Mac.I deleted Mackeeper...now I have problems everywhere :/

So the story goes, I for some reason thought it'd be smart to delete mackeeper, I guess not. Since I have done this, I now get survey pop ups, slow slow navigation of my mac and some of my itunes files have entirely vanished.... I put Mackeeper in the trash and deleted it along with the few things in there... before this started happening... I now apparently have to pay to have Mackeeper again? I thought Mac was great in the no virus department or am I an undercover genius and figured out how to properly mess up my Mac to the point that virus's have taken over? I also noticed I had a file convertor where I was able to watch my avi files through has disappeare, entirely no trace of the program.. Is this something I may be able to do or is the shop best off having it?

Maybe the uninstalling wasn't done correctly. Did you follow these instructions?
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
If you didn't, you may need to re-install the dreaded MacKeeper and then uninstall it again following the above.

Need some help with the best coding approach

Here is my scenario. I need to pull data from AFRU within a certain date range. Once I have this data i need to look at the confirmation number and counter. If the confirmation has more than one entry in the table i need to take the value of field ISOM1 associated with counter 2 and move it into the previous record's ISOM1 field. the reason is the value calculates the set up time form counter 1 to 2 but it is placed in counter 2.
I was thinking of a select from AFRU into an internal table for the date range. Then I would sort descending and keep looping until my confirmation changes. Not sure how to accomplish this however in code.

Here is the code i put together. it doens't like my read or loop.
tables: afru.
     DATA: Ty_afru TYPE standard TABLE OF afru with header line,
          WA_AFRU TYPE TABLE OF afru with header line.
     data: wa_diff_time like afru-ISM01,
           wa_conf like afru-RUECK,
           wa_counter like afru-rmzhl.
     Select * from afru into table ty_afru
     where ERSDA > '01/01/2005'.
     sort ty_afru descending.
    read table tY_afru
    index 1.
     move ty_afru-ISM02 TO WA_DIFF_TIME.
     move ty_afru-rueck to wa_conf.
     LOOP AT tY_afru.
          wa_counter = ty_afru-RMZHL.
         if rueck = ty_afru-rueck and
          RMZHL = yy_afru-RMZHl.
          ty_afru-ISM02 = 0.
          elseif.
          ty_afru-rueck = rueck and
              ty_afru-RMZHL = RMZHL - 1.
        ty_afru-ISM02 = WA_DIFF_TIME.
move ty_afru-rueck to wa_conf.
       endif.
      wa_counter = ty_afru-RMZHL - 1.
     ENDLOOP.
endcase.

Need some help with the String method

Hello,
I have been running a program for months now that I wrote that splits strings and evaluates the resulting split. I have a field only object (OrderDetail) that the values in the resulting array of strings from the split holds.Today, I was getting an array out of bounds exception on a split. I have not changed the code and from I can tell the structure of the message has not changed. The string is comma delimited. When I count the commas there are 26, which is expected, however, the split is not coming up with the same number.
Here is the code I used and the counter I created to count the commas:
public OrderDetail stringParse(String ord)
OrderDetail returnOD = new OrderDetail();
int commas = 0;
for( int i=0; i < ord.length(); i++ )
if(ord.charAt(i) == ',')
commas++;
String[] ordSplit = ord.split(",");
System.out.println("delims: " + ordSplit.length + " commas: " + commas + " "+ ordSplit[0] + " " + ordSplit[1] + " " + ordSplit[2] + " " + ordSplit[5]);
The rest of the method just assigns values to fields OrderDetail returnOD.
Here is the offending string (XXX's replace characters to hide private info)
1096200000000242505,1079300000007578558,,,2013.10.01T23:58:49.515,,USD/JPY,Maker,XXX.XX,XXX.XXXXX,XXXXXXXXXXXXXXXX,USD,Sell,FillOrKill,400000.00,Request,,,97.7190000,,,,,1096200000000242505,,,
For this particular string, ordSplit.length = 24 and commas = 26.
Any help is appreciated. Thank you.

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Need some help with wi-fi setup, please

I have just upgraded from Broadband opt 3 to infinity, currently getting stunning performance, but only when wired !
Have been running a wifi network on a Draytek 2600G for several years now without any problems, comprising 1 desktop, 1 laptop, together with PSP's, Playstation, ipods, Nintendo DS etc, etc. Not surprisingly the HH3 doesn't seem to like this setup and runs like a dog.
Seems to me that I should be able to connect my Vigor 2600G to (either) the Openreach modem, or the HH3, and turn off the facilities that I don't want - i.e. use the connectivity of the HH3 with the wifi facilities of the Vigor 2600G?
Any suggestions or advice on how to achieve this would be most welcome.
regards
Mick

I think that the Vigor 2600 has some PPPoE functionality, but my understanding was that it is not a VDSL router, so will not stand in totally for the HH3.
What I have been able to do is to;
a/   switch off HH3 wifi
b/   assign IP address to the Vigor 2600 from the range used by HH3
c/   switch off Vigor 2600's DHCP functions
d/   cable from HH3 Ethternet to Vigor 2600
Now connected with all devices talking to Vigor 2600 wifi, and via cable to HH3 & 'Net. It's not clear to me if I can move the DHCP functions to the Vigor, for ease pf management, but a workable solution, albeit involving 3 mains connections as compared with one previously. (Looks like the Draytek 2750 will replace all this with a one box solution)
Some speed numbers; (all downloads)
We previously had BT Broadband running at approx 7.5 MB
Cable connection to HH3 & Infinity runs at 35-37MB
HH3 Wifi produces speeds in the region of 1-2 MB (actually, on my MacBook - the iMac in the corner of the living room refused to connect to the HH3 at all)
Using HH3 with Vigor 2600 wifi gives between 18 & 21 MB
regards,
mbb

Can i get some help with the bing app please?

ironically i searched all over the bing website and couldn't find the answer to this:
on the bing commercial they show the ability to hold up your phone with the app open and on the screen you see the scene in front of you but with little popups telling you what each place is. i cannot figure out how to get the app to do that, can anyone provide instructions? thanks.

Bing Mobile email support is here:
https://support.discoverbing.com/default.aspx?%7b!%7dsource=app_iPhone&ct=eformt s&mkt=en-US&productkey=bingmobile&scrx=1&st=1&wfxredirect=1

My iPad has been stolen, I need some help with the Find my iPhone app and iCloud please

Hello people. I have (had) an iPad 1 (wifi only) - which was stolen two days ago. It's locked with a passcode but I am worried that someone will be able to get into it. I've got the Find app installed on my iPhone 4S and it shows that both my iPad and stolen iPod are offline.
Q - if either the iPad or the iPod goes into an unlocked wifi area, will I be notified on my phone?
Q - can anyone actually break into my iPad as it is locked?
Q - how does iCloud work in terms of the info that's on my iPad - photos etc that I don't want to lose?
Q - I've reported this to the police - does Apple need to know?
I'd be very grateful for any advice, many thanks in advance

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

I need some help with the documents on the go application please

Hi. I can't seem to figure out how to open my excel file from my Palm Centro. I'm so lost! Please help.
Post relates to: Centro (AT&T)

User Guide for Documents to Go can be accessed through the help tab on the Documents to Go desktop. Download it via mypalm.com.
Post relates to: Palm TX

Need some help with the colour profile please. Urgent! Thanks

Similar Messages

Maybe you are looking for