Need some sugestions pls
i want to create a program that will resemble to odc/strong dc/etc and need some sugestion. first i will need to create a server that the GUI will send/recieve messages to/from. maybe you can point out some java tehnologies that can be helpfull in this case. if not, maybe some tutorials,articles,anything that might help me. i also need some links about network programming that might help me in doing the project. many thanks
What are you talking about and why did you post this here?
Similar Messages
-
Need some advices pls!!!
i just got a new system and i wolud like your advice in the things i should do to get the best of it beocuse im not to genius with all this numbers.. tks evrybody for the future help
i got a
AMD 64 3400 clawhammer CG 2.2
MSI K8N platinium
2x512 corsair value select cas 2.5 in dimm 1 and 2
shappire x800xt
2x80gb samsung
im using right now for the memory cas 2.5,3,3,6 and 1Tand i put the FSB in 215, the multipiler is in 11 and the agp in 67, reaching 2.3 in speed. i havent change any volt amout.. when i try to put the FSB in 220 the computer stop booting and i have to clear the cmos...
what do you guys recommend to change to get at least 2.4 in speed????
what clock and memory numbers should i put in my x800xt to get some more of taht beast
right now im gettin
3dmark03 - 11850
3dmark2001 - 25600
aquamark - 57500
tks for all the recommendations and sorry for my bad englishQuote
right now im gettin
3dmark03 - 11850
3dmark2001 - 25600
Holy ****!
Man seriously, stop what u are doing. Pick up a copy of Farcry, whack everything up to the max, and enjoy that beast!
Honestly - I highly doubt there's much out there that ur rig wont breeze through atm, so i don't think its worth pushing it to its limits. -
The problem occurres after the downloading is complete and when its in "Preparing Update" procedure and specfically in its last progress (near the end). Suddenly a message pop ups saying that "Software Update Failed" \n "An error occured downloading iOS 7.1."
I've restarted the update process for the 20 th time!!! and reset my iphone twice to factory settings, but still nothing change, same error occures...
My iPhone specs
Version : 7.0.6 (11B651)
Model : MD235AE/ADid it work for you with iTunes?
I have the same problem with my iPad mini. I have done almost all updates of my iOS devices OTA.
I never update issues before.
Also iPad 2 and iPhone 5 just worked fine.
Only now my iPad mini struggles with the update. Did a factory reset too.
And now have iOS 7.0.2 (11A501) on an iPad Model MD543FD/A.
World prefer OTA instead of iTunes.
Thank you for any help. -
The problem occurres after the downloading is complete and when its in "Preparing Update" procedure and specfically in its last progress (near the end). Suddenly a message pop ups saying that "Software Update Failed" \n "An error occured downloading iOS 7.1."
I've restarted the update process for the 20 th time!!! and reset my iphone twice to factory settings, but still nothing change, same error occures...
My iPhone specs
Version : 7.0.6 (11B651)
Model : MD235AE/ATry updating by using iTunes via a computer.
-
Broken 3GS sim tray - need some info PLS
I had to pull a little harder than normal on the white (exterior visible part) of the sim tray and it broke.
Can you tell me how can I get a new one that has the IMEI code and serial number on it??
I'm asking here first because I'm not sure if you can get in touch with apple via email and also I might get an answer faster.
Thank you.If you contact Apple or make appointment at Apple Store they can get a new SIM Tray with the compatible #'s exactly for your iPhone. Once ordered it may take a few days for them to get it in for you. Also they may charge you a small fee. Hopefully you can show them the old tray and they will just do it for free.
-
because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
my mac pro is an early 2008 intel xeon hapertown
thanks a lot
patrick stanley thiolletThought you could use this info about getting FireWire to work! First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 15 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq. -
I need some advice on a small servers network please !!
hi every one.
i need a small help please.
i have a collage project that is upgrading a network and my part is the server's network. actually it is 65servers, windows and non-win.
i wish to know what are the important issues that should be considered in connecting the servers with the rest of the enterprise?
i thought of some,but i need some deatails how to start working on it;
pls add any more or try to explain what do you think should be done in it:
*trafic analysis, but where?
*redundancy and failure backup
*security
*authorization, is VLANs sufficiant?
*server loads, how to calculate it?
Is there a special topology for server networks?or layering?
regards;
naifThere is a layered model for building infrastructure
core layer
distribution layer
access layer
The core layer needs to be fast most of the time layer 2 on some optical systems
Then you have the distribution layer. this is where you connect your servers and traffic analysing on layer 3. (like Cat6500 switches)
Then the access layer thats where you connect the end nodes. (like Cat4500 switches or 2950)
It is wise to segment your network into different VLAN's Like a seperate server VLAN and some client VLAN's, number of client VLAN's depents on the number of end nodes.
You can use multi layer switches (a MSFC card in 6500 switch) for routing between the VLAN's
For redundancy you can use for example 2 6500 switches with MSFC where you implement HSRP to have redundant gateways for clients and servers
For security you have to create some access-lists on the VLAN interfaces on the MSFC so you can implement traffic filtering between VLAN's
Do you also have a internet connection (firewallzone) in that case create a sepearate VLAN in which you connect the (PIX)firewall.
Do you need any more information?
Regards,
Maarten -
Need some clarifications on Quality-of-services
Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
<b>Pls reward if useful</b> -
Need Some Material For XI.
Hi all,
I need some material to prepare XI.
Apart SAP Help site ...pls help me out in finding good material for XI learning for beginner.
Thanks in advance.
Regards,
Harsha.I think it is a good start
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D42795
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D44%26threadID%3D41493%26messageID%3D409257%23409257
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D52541%26messageID%3D541927
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/sdn/developerareas/dotnet.sdn?node=linkDnode1-2
Hope this helps!
regards
roberti -
Need some help with color on a column.
Hello
I need some help on how I can set the color on either column header or the whole column.
I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values.
The sum of these textboxes should match the the total column on top. If it does not match then the header or column should be marked red.
I have one pl/sql prosess where i check this, and i return a message for that column, can I in this prosess set the column color for the report?
report looks like this
total1----total2----total3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
so if the sum of all the box1s do not match total1 then column or header is red.
thanks,
AndersHi Anders,
have a look at Carls example: http://htmldb.oracle.com/pls/otn/f?p=11933:7:3740381051529350
It works with row template, but maybe you can change it for working with column templates.
chrissy -
Need some help with region position
Hi,
I need som help with regions position....
Background:
I have 2 regions, I will call them reg1, reg2 and reg3.
reg1 = Page Template Body (2. items below region content), column 1, search region.
reg2 = Page Template Body (2. items below region content), column 2, import file region.
reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
Issue with the position, the setup explained makes my layout like this
reg1--------------------------------reg2
------------------reg3--------------------
What I want:
reg1-reg2
------------------reg3--------------------
What am I doing wrong?
Regards DanielDaniel,
this will also work:
Region1 HTML table cell attributes
width="10%"
Region2 HTML table cell attributes
align="left"
without touching the page template.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Some problem about SAP R/3 ~ I need some detail solutions and suggests
I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
Problem 1.2: In DOS, startsap command cannot start SAP R/3.
Problem 1.3: Oracle 9i database automatically shutdown by itself.
Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
Problem 3.1: A copied client from the Client 000 cannot be customized.
Problem 3.2: No sample data in IDES after a successful client copy.
Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
Problem 5.1: A redo log file was lost and the database could not be started.
Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected] -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
New to Solaris administration - Need some help with some issues
Hello all,
I am a new to Solaris administration and need some assistance with a few things. I was going to make separate posts but decided it would be easy to keep track of in one. I really do not know much about the OS but I do have a little Linux background so that might help me out. I am going to number my problems to keep them sorted, so here we go.
The machine:
Sunfire V880
4x 73GB HDs
PCI dual fiber channel host adapter
Attached RAID array:
Sun StorEdge T3 Array with 9x 73GB HDs
Sun DDS4 Tape Drive in a Unipack
OS: Solaris 5.10
Updates: Updated everything except 2 patches (Updating is a real pain isn't it? At least it seems that way to me.)
1. So I might as well start with the update issues! These 2 updates will not install:
-PostgreSQL 8.2 source code, (137004-02)
Utility used to install the update failed with exit code {0}.
-Patch for mediaLib in solaris, (121620-03)
Install of update failed. Utility used to install the update is not able to save files. Utility used to install the update failed with exit code 4.
No idea why the PostgreSQL update is not working, but the medialib patch seems to not have enough hard drive space.
2. Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the medialibe update above says that I don't have enough space.
3. I probably need more space for the OS and updates, is there a way to "add" space onto the hard drive that currently is running the OS?
3. Once I see the other hard drives I wish to combine them to make a RAID 0 and RAID 5 array, how do I go about doing that?
4. How can I find/see the tape drive?
5. Does my swap space really need to be 64GB? I know the book I have read suggests it, but I only made it 5GB because it didn't seem to make sense to make it 64GB.
Thank you in advance for the help. I know these are a lot of questions to ask but please go easy on me :)
rjbanker
Edited by: rjbanker on Mar 7, 2008 8:21 AMSolarisSAinPA*
1.
-PostgreSQL 8.2 source code, (137004-02)
Utility used to install the update failed with exit code {0}.
Exit code 0 means there were no errors. When you run showrev -p 137004-02, does your system show that the patch is installed? You can check the log for a particular patch add attempt in /var/sadm/patch/+patch_num_rev+1- A bunch of stuff shows up, here is a portion (I am not entirely sure what it means, there must be a least a page of stuff like this):
Patch: 121081-08 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc cccrr, SUNWccccr, SUNWccfw, SUNWccsign, SUNWcctpx, SUNWccinv, SUNWccccfg, SUNWcc fwctrl
Patch: 122231-01 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc ctpx
Patch: 120932-01 Obsoletes: Requires: Incompatibles: Packages: SUNWcctpx
Patch: 123123-02 Obsoletes: Requires: Incompatibles: Packages: SUNWccinv
Patch: 121118-12 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc smauth, SUNWppror, SUNWpprou, SUNWupdatemgru, SUNWupdatemgrr, SUNWppro-plugin-su nos-base
2.
Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I >installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the >medialibe update above says that I don't have enough space.
When you run format command, how many drives are listed? Identify your root drive (compare with output of df command you ran earlier) Please post here.2. Output of df-hk, looks like I ran out of room. Should I just go ahead and reinstall the OS?
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 5.9G 5.4G 378M 94% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 42G 1.3M 42G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 42G 1.1M 42G 1% /tmp
swap 42G 32K 42G 1% /var/run
/dev/dsk/c1t0d0s7 46G 47M 46G 1% /export/home
3. So I guess the general consensus is to reinstall the OS, is that correct?
4. There is nothing in \dev\rmt, and unfortunately I don't have a tape to test it with!
5. I guess 5GB will be ok for what we do.
Alan.pae*
1. I think the above text might explain why it failed, although I don't know how to correct it.
2. Output of format:
# mount
/ on /dev/dsk/c1t0d0s0 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d80008 on Mon Mar 10 10:56:51 2008
/devices on /devices read/write/setuid/devices/dev=4dc0000 on Mon Mar 10 10:56:19 2008
/system/contract on ctfs read/write/setuid/devices/dev=4e00001 on Mon Mar 10 10:56:19 2008
/proc on proc read/write/setuid/devices/dev=4e40000 on Mon Mar 10 10:56:19 2008
/etc/mnttab on mnttab read/write/setuid/devices/dev=4e80001 on Mon Mar 10 10:56:19 2008
/etc/svc/volatile on swap read/write/setuid/devices/xattr/dev=4ec0001 on Mon Mar 10 10:56:19 2008
/system/object on objfs read/write/setuid/devices/dev=4f00001 on Mon Mar 10 10:56:19 2008
/platform/sun4u-us3/lib/libc_psr.so.1 on /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
/platform/sun4u-us3/lib/sparcv9/libc_psr.so.1 on /platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
/dev/fd on fd read/write/setuid/devices/dev=50c0001 on Mon Mar 10 10:56:51 2008
/tmp on swap read/write/setuid/devices/xattr/dev=4ec0002 on Mon Mar 10 10:56:52 2008
/var/run on swap read/write/setuid/devices/xattr/dev=4ec0003 on Mon Mar 10 10:56:52 2008
/export/home on /dev/dsk/c1t0d0s7 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d8000f on Mon Mar 10 10:56:57 2008
3. Judging by the above text I will be doing a reinstall huh?
4. Actually I am not familiar with tape backups let alone solaris backup apps! Any suggestions? (Preferably free, have to cut down on costs.)
5. No comment
Thanks for the help, hope to hear from you again!
rjbanker
Maybe you are looking for
-
How do I sync my iphone to a different itunes account?
My whole family has been using the same itunes account for years now, but because of the recent updates we are receving eachother's imessages. We literally have all went in the message settings and changed the options for just our own phone numbers b
-
Serious speed loss on infinity all of a sudden
Hi, Any advice welcome - My infinity download speed has dropped from 40mb to just over 6mb since yesterday. Upload speed has remained at 10mb - I havent made any changes to my equipment. Are there any reported issues - nothing I can find on the websi
-
Using Acrobat XI to Convert Word files to PDF fillable forms & use with FormsCentral
I collect data from several team members across the country with fillable PDF forms that were created from Word through the use of Acrobat XI. Can these files be imported into FormsCentral and distributed to the team members for filling out?
-
im trying to update my account info. when i press done it tells me to go to support
-
Helvetica display bug in premiere titles?
I have a very strange issue. Certain characters with the helvetica type face display portions of the letter "filled in". It's hard to explain, so see the attched screen shot. What is going on here? Other programs like microsoft word display them just