Need text to be more Bold

Is there away to set the Text default to make the text more Bold?

Maybe you can use a default font that is bolder.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Similar Messages

  • Is there a way to send a group text message to more than 10 recepients?

    Is it possible to send a group text message to more than 10 recipients? I called AT&T tech support and they said the phone's software limits group messages to no more than 10.

    Apple does not explain why it makes the choices it does, nor will you get a response
    from Apple on this forum. You can make Apple aware of your thoughts at
    www.apple.com/feedback  Your message will be read, but not answered.
    AFAIK, there is no way to increase the limit of the native app. Use a 3rd party app if that
    function is important to you. Others have expressed similar frustration in the past and
    have chosen another app to fill their needs.

  • Why can't i send a single text message to more than 10 contacts??

    Why can't i send a single text message to more than 10 contacts??  I use AT&T

    calfonsi wrote:
    Why can't i send a single text message to more than 10 contacts??  I use AT&T
    That's a built in limitation of iOS. If you need to send messages to larger groups of people, you'll either need to send them in  batches of 10 or use a dedicated group messaging app. GroupMe works pretty well. Blackberry Messenger is also an option, though I don't like the interface as much.

  • Sending text msgs to more than one person

    OK, I realize I'm probably just a doofus who can't figure this out, but how do you send a text message to more than one person on the iphone? I swear I've looked everywhere. Help, please? Thanks!

    You will need to use the email feature of the iPhone to do this.
    To send Apple feedback: http://apple.com/feedback

  • How to make Dynamically Shortened Text With "Show More"

    Hi there! i want to know how to make dynamically shortened text with show more or read more in my website using HTML 5 pages  or ASP.NET ?
    example like these paragraphs 
    Lorem Ipsum är en utfyllnadstext från tryck- och förlagsindustrin. Lorem ipsum har varit standard ända sedan 1500-talet, när en okänd boksättare tog att antal bokstäver och blandade dem för att göra ett provexemplar av en bok. Lorem ipsum har inte bara överlevt fem århundraden, utan även övergången till elektronisk typografi utan större förändringar. Det blev allmänt känt på 1960-talet i samband med lanseringen av Letraset-ark med avsnitt av Lorem Ipsum, och senare med mjukvaror som Aldus PageMaker.
    Det är ett välkänt faktum att läsare distraheras av läsbar text på en sida när man skall studera layouten. Poängen med Lorem Ipsum är att det ger ett normalt ordflöde, till skillnad från "Text här, Text här", och ger intryck av att vara läsbar text. Många publiseringprogram och webbutvecklare använder Lorem Ipsum som test-text, och en sökning efter "Lorem Ipsum" avslöjar många webbsidor under uteckling. Olika versioner har dykt upp under åren, ibland av olyckshändelse, ibland med flit (mer eller mindre humoristiska).
    I motsättning till vad många tror, är inte Lorem Ipsum slumvisa ord. Det har sina rötter i ett stycke klassiskt litteratur på latin från 45 år före år 0, och är alltså över 2000 år gammalt. Richard McClintock, en professor i latin på Hampden-Sydney College i Virginia, översatte ett av de mer ovanliga orden, consectetur, från ett stycke Lorem Ipsum och fann dess ursprung genom att studera användningen av dessa ord i klassisk litteratur. Lorem Ipsum kommer från styckena 1.10.32 och 1.10.33 av "de Finibus Bonorum et Malorum" (Ytterligheterna av ont och gott) av Cicero, skriven 45 före år 0. Boken är en avhandling i teorier om etik, och var väldigt populär under renäsanssen. Den inledande meningen i Lorem Ipsum, "Lorem Ipsum dolor sit amet...", kommer från stycke 1.10.32.
    Den ursprungliga Lorem Ipsum-texten från 1500-talet är återgiven nedan för de intresserade. Styckena 1.10.32 och 1.10.33 från "de Finibus Bonorum et Malorum" av Cicero hittar du också i deras originala form, åtföljda av de engelska översättningarna av H. Rackham från 1914.

    Moved to the main Dreamweaver support forum.
    There are several ways you could approach this. Here's one you might try:
    Give the first paragraph an ID, such as "first", and wrap the paragraphs you want to hide in a <div> with another ID, such as "more". Then add the following block of JavaScript just before the closing </body> tag of the page:
    <script>
    var first = document.getElementById('first'),
         more = document.getElementById('more'),
         trigger = document.createElement('span');
    trigger.id = 'trigger';
    trigger.innerHTML = 'Show less';
    first.appendChild(trigger);
    function toggleDiv() {
      var state = more.className,
           text = trigger.innerHTML;
      more.className = (state == 'open') ? 'closed' : 'open';
      trigger.innerHTML = (text == 'Show more') ? 'Show less' : 'Show more';
    toggleDiv();
    if (trigger.addEventListener) {
        trigger.addEventListener('click', toggleDiv, false);
    } else if (trigger.attachEvent) {
      trigger.attachEvent('onclick', toggleDiv);
    } else {
      trigger.onclick = toggleDiv;
    </script>
    This gets references to the "first" paragraph and the "more" <div>. It also creates a <span> with the ID "trigger" that's appended to the "first" paragraph. The rest of the script defines a function called toggleDiv(), which toggles the "more" <div> open and closed, and changes the text in the "trigger" <span>.
    You also need to create the following style rules for the various elements:
    <style>
    #trigger {
        text-decoration: underline;
        color: blue;
        cursor: pointer;
    #more {
        transition: ease-out .7s;
        overflow: hidden;
    #more p:first-child {
        margin-top: 0;
    #more.closed {
        height: 0;
        -webkit-transform: translateY(-600px);
        transform: translateY(-600px);
    #more.open {
        -webkit-transform: translateY(0);
        transform: translateY(0);
        max-height: 600px;
    #more + p {
        margin-top: 0;
    </style>
    This solution hides the text and creates the "trigger" <span> only if JavaScript is enabled in the browser. It should work in all browsers, including Internet Explorer 8 and earlier.

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Font is rendering in more bold appearance using jre 1.5 as compared to 1.4

    When I am going to compile my application using jdk 1.4 and 1.5 both,in 1.5 fonts in my application component like frame,dialog fonts are appearing in different manner means in 1.5 it is appearing in bolder manner.
    We are developing framework application and we have to give release for jdk 1.5 version but it is giving font difference.
    Please resolve this issue because it is very urgent and critical.
    this is not our framework problem i have developed one below simple application and compiled it in jdk 1.4 and 1.5 it is showing font difference.
    Fonts like times new roman and arial etc are coming in bolder manner means more width but height and style is same.
    i have snapshot also but i am not able to paste becasue editor is not accepting images.
    I am giving you small program that will reproduce defect apart from my application.
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.FontMetrics;
    import java.awt.Frame;
    import java.awt.Graphics;
    import javax.swing.JDialog;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JTextArea;
    import javax.swing.SwingConstants;
    public class WizardDemo14
    public static void main(String[] args)
    JFrame dlg = new JFrame("COMPILED IN 1.5");
    JLabel jLabel1 = new JLabel();
    jLabel1.setFont(new java.awt.Font("Times New Roman", 1, 50));
    jLabel1.setForeground(Color.blue);
    jLabel1.setHorizontalAlignment(SwingConstants.CENTER);
    jLabel1.setHorizontalTextPosition(SwingConstants.CENTER);
    jLabel1.setText("Finish...");
    dlg.getContentPane().setLayout(new BorderLayout());
    dlg.getContentPane().add(jLabel1);
    dlg.setSize(400 ,400);
    dlg.setVisible(true);
    dlg.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Please help me

    No sir
    my problem is still not solved
    see you told that try with Font.BOLD
    so i tried below code
    jLabel1.setFont(new java.awt.Font("Times New Roman",Font.BOLD,50));
    now if you compile above statements in jdk 1.4 and 1.5 you will notice big difference in fonts
    so what is the solution of this??
    why fonts are appearing in different manner one is more bold in 1.5 and other is not that much bold
    one thing i found is that character width is different for 1.4 and 1.5 may be due to this it is coming in different manner.i am not sure this is correct.
    so give me solution according to jdk why in above case font are different even id i am not going to use magic number and one thing i found is that when we use Font.PLAIN it is showing same font in both 1.4 and 1.5
    so please help me

  • How can I make the GRID lines more bold within a table in the new Pages?  (Not the outline of a table)

    I can't find where to darken GRID lines on a table in the new Pages.  I can make the outline more bold, but not the grid lines within the table.  Is there a way to do this?  The default grid lines are far too faint.

    Yeah, the Help is missing a little.
    If you select the block of cells that you want to change, then in the Format inspector:
    Select the Cell tab
    Expand the Border section
    Set a line type
    Set a line width
    Choose a line color
    Choose one of the nine options for which borders get the new settings

  • I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

    See if exporting them helps:
    Exporting From iPhoto | Apple Support Communities
    Gene

  • How do make the text on a label Bold?

    Simple question: How do make the text on a label Bold?

    use html : label.setText("<html><body><b>TestText</b></body>/html>");
    regards,
    Tim

  • Why does Lion need to be rebooted more than Snow Leopard?

    After upgrading to Lion I have noticed that I need to reboot Lion  more often than Snow Leopard. Is this just me or is this something others have seen?

    I think this is just you. Nevertheless I would install the 10.7.1 update if you have not yet done so. This will improve the stability of Lion somewhat. But before you do that I would reinstall Lion. You may find this will improve things quite a bit especially if you upgraded from Snow Leopard. This will not erase the drive so you won't lose any of your files.
    Reinstalling Lion
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • [ALV] Text in color and bold

    Hello,
    I have an ALV Grid and I would like one cell, with text color in red and in bold.
    I'm in OOP's with CL_GUI_ALV_GRID.
    I've tried like that :
    CONSTANTS :
                c_bold(4)           TYPE x       VALUE '00000020',
                c_red(4)            TYPE x       VALUE '00000017'.
    *-LAYOUT
      fe_layout-cwidth_opt = c_x.
      fe_layout-no_rowmark = c_x.
      fe_layout-info_fname = 'ROW_COLOR'.
      fe_layout-stylefname = 'CELLS_STYLES'.
    *-OUTTAB
      clear we_style.
      we_style-fieldname = 'XXXXX'.
      we_style-style = c_bold.
      we_style-style = c_red.
      insert we_style into table we_outtab-cells_styles.
    It doesne't work. The bold put the text color in black.
    There is a solution ?
    Thank you.

    Hello Bernard
    I checked my sample report and it shows that '00000037' yields the text in bold and red.
    '00000037' = '00000020' + '00000017'   !!!
    Below you find a modified version of the sample report:
      BREAK-POINT.
      CONSTANTS :
          c_bold(4)           TYPE x       VALUE '00000020',
          c_red(4)            TYPE x       VALUE '00000017'.
      CLEAR: ls_outtab2.
      REFRESH: lt_celltab.
      ls_outtab2-maxlen = 0.
      ls_outtab2-style  = c_bold.
      ls_outtab2-style2 = c_red.
      ls_style-style = c_bold + c_red.
      INSERT ls_style INTO TABLE lt_celltab.
      ls_outtab2-celltab = lt_celltab.
      INSERT ls_outtab2 INTO gt_outtab2 INDEX 1.
    ENDFORM.                    " FILL_OUTTAB2
    Entire report:
    *& Report  ZUS_SDN_ALV_STYLE_LIST
    *& Thread: [ALV] Text in color and bold
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1191290"></a>
    *& Thread: color alv list display
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1072435"></a>
    *& Thread: Hiliting the Specific rows in ALV grid
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1062831"></a>
    *& Thread: Reg... coloring of rows
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1041516"></a>
    *& Thread: Painting cell in alv with objects
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1029759"></a>
    *& Thread: styles
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="830498"></a>
    *& Thread: Is it possible to assign color to manually modified record in tabcontrol?
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="878289"></a>
    *& The report generates style values and shows their effect in ALV grid.
    REPORT  zus_sdn_alv_cell_style_2.
    TYPE-POOLS: abap.
    TYPES: BEGIN OF ty_s_outtab.
    INCLUDE TYPE knb1.
    TYPES: celltab TYPE lvc_t_styl. " cell style
    TYPES: END OF ty_s_outtab.
    TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
    WITH DEFAULT KEY.
    TYPES: BEGIN OF ty_s_outtab2.
    INCLUDE TYPE lvc_s_styl.
    TYPES: celltab TYPE lvc_t_styl. " cell style
    TYPES: END OF ty_s_outtab2.
    TYPES: ty_t_outtab2 TYPE STANDARD TABLE OF ty_s_outtab2
    WITH DEFAULT KEY.
    DATA:
    gs_layout TYPE lvc_s_layo,
    gs_variant TYPE disvariant,
    gt_fcat TYPE lvc_t_fcat.
    DATA:
    gt_outtab TYPE ty_t_outtab,
    gt_outtab2  TYPE ty_t_outtab2.
    PARAMETERS:
      p_rows    TYPE i DEFAULT 200.
    START-OF-SELECTION.
      SELECT * FROM knb1 UP TO 100 ROWS
      INTO CORRESPONDING FIELDS OF TABLE gt_outtab
      WHERE bukrs = '1000'.
    **  data: gr_kunnr    type RANGE OF kunnr.
    **  SELECT kunnr as low from knb1 into CORRESPONDING FIELDS OF TABLE gr_kunnr
    **    WHERE bukrs = '1000'.
      PERFORM set_layout_and_variant.
      PERFORM set_cell_style.
    **  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
    **    EXPORTING
    **      i_structure_name = 'KNB1'
    **      i_grid_title     = 'Cell Styles'
    **      is_layout_lvc    = gs_layout
    **      i_save           = 'A'
    **      is_variant       = gs_variant
    **    TABLES
    **      t_outtab         = gt_outtab
    **    EXCEPTIONS
    **      program_error    = 1
    **      OTHERS           = 2.
    **  IF sy-subrc = 0.
    **  ENDIF.
      PERFORM fill_outtab2.
    **  PERFORM fill_fieldcatalog_2.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
        EXPORTING
          i_structure_name = 'LVC_S_STYL'
          i_grid_title     = 'Cell Styles'
          is_layout_lvc    = gs_layout
          i_save           = 'A'
          is_variant       = gs_variant
    *      IT_FIELDCAT_LVC  = gt_fcat
        TABLES
          t_outtab         = gt_outtab2
        EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
      IF sy-subrc = 0.
      ENDIF.
    END-OF-SELECTION.
    *& Form SET_LAYOUT_AND_VARIANT
    FORM set_layout_and_variant .
      CLEAR: gs_layout,
      gs_variant.
      gs_layout-cwidth_opt = abap_true.
      gs_layout-stylefname = 'CELLTAB'.
      gs_variant-report = syst-repid.
      gs_variant-handle = 'STYL'.
    ENDFORM. " SET_LAYOUT_AND_VARIANT
    *&      Form  set_cell_style
    *       text
    FORM set_cell_style .
    * define local data
      CONSTANTS:
      lc_style_bold TYPE int4 VALUE '00000121',
      lc_style_red TYPE int4 VALUE '00000087',
      lc_style_cursive TYPE int4 VALUE '00008700',
      lc_style_underline_faint TYPE int4 VALUE '00008787',
      lc_style_underline TYPE int4 VALUE '00008707',
      lc_style_underline_red TYPE int4 VALUE '00008007'.
      DATA:
      ls_outtab TYPE ty_s_outtab,
      ls_style TYPE lvc_s_styl,
      lt_celltab TYPE lvc_t_styl.
      CLEAR: ls_style.
      ls_style-fieldname = 'BUKRS'.
      ls_style-style = '00000011'.    " make contents invisible
      INSERT ls_style INTO TABLE lt_celltab.
    **  CLEAR: ls_style.
    **  ls_style-fieldname = 'BUKRS'.
    **  ls_style-style = lc_style_bold.
    **  INSERT ls_style INTO TABLE lt_celltab.
    **  CLEAR: ls_style.
    **  ls_style-fieldname = 'KUNNR'.
    **  ls_style-style = lc_style_red.
    **  INSERT ls_style INTO TABLE lt_celltab.
    **  CLEAR: ls_style.
    **  ls_style-fieldname = 'ERDAT'.
    **  ls_style-style = lc_style_cursive.
    **  INSERT ls_style INTO TABLE lt_celltab.
    **  CLEAR: ls_style.
    **  ls_style-fieldname = 'ERNAM'.
    **  ls_style-style = lc_style_underline.
    **  INSERT ls_style INTO TABLE lt_celltab.
      ls_outtab-celltab = lt_celltab.
      MODIFY gt_outtab FROM ls_outtab
      TRANSPORTING celltab
      WHERE ( bukrs = '1000' ).
    ENDFORM. " SET_CELL_STYLE
    *&      Form  FILL_OUTTAB2
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM fill_outtab2 .
    * define local data
      DATA: ls_outtab2  TYPE ty_s_outtab2,
            ld_num8(8)  TYPE n,
            ld_idx      TYPE i,
            ld_fname    TYPE fieldname,
            ld_perc     TYPE i,
            ld_text(50) TYPE c.
      DATA:
      ls_style TYPE lvc_s_styl,
      lt_celltab TYPE lvc_t_styl.
      FIELD-SYMBOLS: <ld_style>  TYPE lvc_style.
      ld_num8 = 0.
      DO p_rows TIMES.
        WRITE syst-index TO ld_text NO-ZERO.
        CONDENSE ld_text NO-GAPS.
        ld_perc = ( syst-index * 100 ) / p_rows.
        CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
          EXPORTING
            percentage = ld_perc
            text       = ld_text.
        CLEAR: ls_style,
           ls_outtab2.
        REFRESH: lt_celltab.
        ls_outtab2-maxlen = syst-index.
        MOVE ld_num8 TO ls_outtab2-style.
        ls_style-style = ls_outtab2-style.
        INSERT ls_style INTO TABLE lt_celltab.
        ls_outtab2-celltab = lt_celltab.
        APPEND ls_outtab2 TO gt_outtab2.
        ADD 1 TO ld_num8.
      ENDDO.
      BREAK-POINT.
      CONSTANTS :
          c_bold(4)           TYPE x       VALUE '00000020',
          c_red(4)            TYPE x       VALUE '00000017'.
      CLEAR: ls_outtab2.
      REFRESH: lt_celltab.
      ls_outtab2-maxlen = 0.
      ls_outtab2-style  = c_bold.
      ls_outtab2-style2 = c_red.
      ls_style-style = c_bold + c_red.
      INSERT ls_style INTO TABLE lt_celltab.
      ls_outtab2-celltab = lt_celltab.
      INSERT ls_outtab2 INTO gt_outtab2 INDEX 1.
    ENDFORM.                    " FILL_OUTTAB2
    *&      Form  FILL_FIELDCATALOG_2
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM fill_fieldcatalog_2 .
    * define local data
      DATA: ls_fcat TYPE lvc_s_fcat,
            lt_fcat TYPE lvc_t_fcat.
      DATA: ld_fname  TYPE fieldname.
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
    *     I_BUFFER_ACTIVE              =
          i_structure_name             = 'LVC_S_STYL'
    *     I_CLIENT_NEVER_DISPLAY       = 'X'
    *     I_BYPASSING_BUFFER           =
    *     I_INTERNAL_TABNAME           =
        CHANGING
          ct_fieldcat                  = lt_fcat
        EXCEPTIONS
          inconsistent_interface       = 1
          program_error                = 2
          OTHERS                       = 3.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      DELETE lt_fcat WHERE ( fieldname NE 'STYLE' ).
      READ TABLE lt_fcat INTO ls_fcat INDEX 1.
      DO 16 TIMES.
        ls_fcat-fieldname = 'STYLE'.
        ls_fcat-col_pos = syst-index.
        WRITE syst-index TO ld_fname NO-ZERO.
        CONDENSE ld_fname NO-GAPS.
        CONCATENATE ls_fcat-fieldname ld_fname INTO ls_fcat-fieldname.
        APPEND ls_fcat TO gt_fcat.
      ENDDO.
    ENDFORM.                    " FILL_FIELDCATALOG_2
    Regards
      Uwe

  • [svn:bz-trunk] 21286: Also need to change 2 more private members to protected in order to make the first call after login

    Revision: 21286
    Revision: 21286
    Author:   [email protected]
    Date:     2011-05-20 11:43:00 -0700 (Fri, 20 May 2011)
    Log Message:
    Also need to change 2 more private members to protected in order to make the first call after login
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

    Revision: 21286
    Revision: 21286
    Author:   [email protected]
    Date:     2011-05-20 11:43:00 -0700 (Fri, 20 May 2011)
    Log Message:
    Also need to change 2 more private members to protected in order to make the first call after login
    Modified Paths:
        blazeds/trunk/apps/ds-console/console/ConsoleManager.as

  • All of a sudden tonight when I went to sync with my iTunesMacPro, I received an error message that the iPhone could not be sync'ed because it needed 6.25 GB more space

    I have a 16 GB iPhone 4S.  Tonight when I went to sync with my iTunes on my MacPro, I received an error message that the iPhone could not be sync'ed because it needed 6.25 GB more space. I still have 2.5 GB free. I sync'ed last night fine.  How could I need 8.75 GB (6.25 +2.5) more space on a 16GB iPhone.  I have added nothing but audio podcasts to my iTunes library on my Mac in the last two days and I have not change the sync setting on my iPhone.  Something has gone haywire.  Any ideas.  Mahalo, Oahu Guy

    I resolved this after some analysis.  Turnes out that iTunes was not recognizing that my music was already installed on my iPhone, so when I tried to sync, iTunes was attempting to load all my music a second time, and there was not enough room on my iPhone for that.  I did a restore from backup today and this appears to have resolved the problem.  I initiatied an iTunes sync and it worked fine.  Not sure where the glitch was.  Could have been in the latest update of the iTunes software.  Not sure.  Anyway, I'm good now.
    Oahu Guy

  • HT1386 I have at least 9 gigs of memory left over on my Iphone but for some reason my mac keeps telling me that I need 6.5 gigs more to fit my library onto my phone. What can I do to fix it?

    I have 9.81 GB of memory free on my iphone, which is more than enough to hold my entire music library, but for some reason my mac keeps telling me that I need 6.5 GB more of memory space to hold everything in my library. What can I do to solve this?

    Are there any other things selected to be synced to your phone? Photos perhaps?

Maybe you are looking for