Need to convert PageMaker 6.5 Plus files from Windows XP to PDF for Windows 7.

I need to convert PageMaker 6.5 Plus files into PDF from a Windows XP operating system to a Windows 7 operating system. It tells me I need a postscript printer. I don't have a postscript printer and really don't want to print them. I just want to transfer the files from Windows XP to Windows 7. Help!!

No, it isn't telling you that you need a PostScript printer. It's telling you that you need a PostScript printer DRIVER, which is software, not a printer.
Use the Add Printer function to add an Apple LaserWriter IINTX. That's a PostScript printer. Then try again.
I don't quite understand the Windows 7 connection, though. What are you hoping to achieve by making a PDF. You WON'T be able to edit them, if that's the idea.

Similar Messages

  • Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4.  I have downloaded Raw file plug-in v 6.7.1 but still can't read the files.

    Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4.  I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?

    Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
    It is not compatible with CS5 or older and never will be.
    If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
    Camera raw, DNG | Adobe Photoshop CC

  • Have CS5 and CS6.  Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

    Have CS5 and CS6.  Need to reduce size of file from 6Mb to 2 Mb for contest purposes without losing original

    Just save the document to a new jpeg file name using a lower quality setting or re-size the image down in  size the save a high quality smaller new jpeg image.

  • I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

    Do some testing to get your method working right with some less than important footage.
    Copy/paste files where you want then.
    Use the FCE Reconnect feature to tell FCE where the newly copied files reside.
    Make sure the new location and files are working as expected with your Projects.
    Delete the original files if no longer required.
    Al

  • I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?

    Here is the direct Adobe page.
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • Want to convert a file from Windows XL to PDF

    Want to convert a file from Windows XL to a PDF can this be don?

    Search!
    http://lmgtfy.com/?q=convert+xl+file+to+pdf

  • How to convert WMA files (from Windows Media Player) to play in iTunes

    How do I convert WMA files (from Windows Media Player) to now play in iTunes?

    Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
    tt2

  • Must I use a converter program to import movie files from Canon powershot s95?

    Must I use a converter program to import movie files from Canon powershot s95?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    With Elements 11 you cannot.
    The SX60 HS was first supported in  Camera Raw 8.7 which is only compatible with Elements 13 and later.
    Options:
    Pay to upgrade to Elements 13
    Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
    Photoshop Help | Digital Negative (DNG)

  • Can you convert a favourites file from windows to a bookmark file for mac?

    can you convert a favourites file from windows to a bookmark file for mac?

    I can't answer for Internet Explorer but you should be able to export Bookmarks from FireFox. If you can't export from IE you may be able to import from EI to FireFox first.
    In FireFox, menu BookMarks>Organize Bookmarks, then in the pane which opens, menu File>Export (that's how it works on Linux so Windows should be broadly similar). The result should be an html file.
    You may be able to import this into Safari on your Mac; certainly you should be able to import it into FireFox and perhaps from there to Safari if necessary.

  • OS X 10.4.7 server: Samba leaking ram when copying large files from windows

    Hi.
    I'm having problems with:
    Copying files from windows clients to OS X Server 10.4.7 uses up the RAM needed for the files to be copied.
    If I copy a 3GB file, it uses 3GB of RAM
    If I copy a 5GB file, it uses its 4GB of RAM, plus VM.
    If I copy 11GB of files (that is several little files, plus some big by dropping a folder to the share), it consumes all the RAM the machine has, and because of VM paging, whatever other clients are reading from the disk (XRaid) start to have hiccups.
    The RAM of the machine NEVER gets flushed after the copying has finished. So Samba is unusable as it is. I have four Xserves with 4GB of RAM, with 4 XRaids connected each one to each Xserve with its Apple Fiber Channel card and cables.
    I already did the ack=0 thing, got the size of inet.tcp.sendspace and rcvspace to 8388608 and the buffer to 16777216.
    The transfers rates are up to 70MB/s with 2 channel 1gb trunking, and at very sustained rates..
    We are using these to edit video content (DV 25) in Sony Vegas with 2 or 3 clients for each server.
    Any suggestions?
    Thanks very much.
    XServe G5 cluster node (4) / XRaid 7TB (4)   Mac OS X (10.4.7)  

    Michael, I occasionally notice anomolous behaviour when files get dragged between volumes. Mostly the copying window shows an accurate and immediate indication of what's going on, but other times it just looks like nothing's happening, the display never changes, yet, it is in fact copying the files over. Now, if you're copying 2gb files from DVD to HD, it's gonna take some time, more than 5 minutes, so I'm wondering how long you've left it before forcing it to quit?

  • Can't copy some files from Windows 7 to Mac OSX over network

    Hi,
    I'm running the latest version of Max OSX v10.8.4 on a brand new Macbook Pro.
    I have followed the setup instructions at http://www.7tutorials.com/how-change-workgroup-mac-os-x-easy-networking to access my Macbook from Windows, and http://www.howtogeek.com/howto/24950/how-to-share-a-folder-in-os-x-with-windows/ to share some folders from my Macbook to Windows.
    I am now trying to copy some files from my Windows 7 Pro (SP1) computer to my Mac, and have hit the following problems:
    I can view my Macbook in my list of local networked computers on WIndows, but I cannot access it. Clicking on it causes Windows 7 to try and access it, but then I get a message after a minute saying the network path could not be found. However, if I manually enter the IP address of my Macbook in the Windows address bar (\\192.168.0.191), I can view and access all the shared folders. I can never access the Macbook via it's computer name (\\MACBOOK-ROB).
    I cannot copy some files from Windows to my Macbook shared folders via Windows. There is nothing to distinguish these files from the hundereds of other files that I have successfully copied to my Macbook. They are pictures and music with no special characters in the filenames, not overly long filenames or folder paths, no access restrictions, or any other security restriction that I can see. However, every single attempt to copy these files to my Macbook results in WIndows reporting that access to the destination was denied.
    I have tried both these above scenarios on WiFi and Ethernet, and the results are the same.
    So:
    Why am I unable to access my Macbook by it's computer name on the network? How can Windows see it, but not access it?
    What are the limitations on transferring files over SMB that is (presumably) causing these specific files to fail?
    Thanks for any help you can offer.

    I have a fix for inability to copy files. I had the same problem moving a lot of old files across my LAN from a Windows XP machine to a Mac Mini running Mountain Lion. After confirming copy of some special file, I would get an error that terminated the copy operation, and info on the Mac side would show a locked folder.
    I finally decided to eliminate all special files on the Windows side, before copying, by running
         attrib -s -h -r /s /d [drive or folder]\*.*
    in a command window. Running attrib /?  tells what the arguments mean, but it doesn't explain that you need the *.* to make the command go through the hierarchy clearing the special attributes on all the files.
    After I did that, and then used drag and drop between two Windows Explorer windows (one on the Windows drive, on on the target drive on the Mac), the whole move operation ran to completion without stopping either for error or to ask for confirmation.
    I do not have a fix for the inability to access some computers by name rather than by IP address. I'm looking into the possibility of activating bind on the Mac but I haven't done anything yet.

  • Windows Easy Transfer can't transfer files from Windows Vista or Windows XP

    I'm running a English Windows Vista Ultimate and just bought a
    ENGLISH Windows 8.1. I've downloaded the WET for Windows vista and tried to complete the second portion of the transfer by specifying the saved .MIG file WET created. Then I got the error message: "Windows Easy Transfer can't transfer
    files from Windows Vista or Windows XP".
    The truth is, Microsoft was too busy integrating special effects to it's operating system and claimed it as fully polished instead of making sure built-in tools were worth using.
    Another harsh reality is that THERE IS NO WAY TO TRANSFER a file from Windows Vista to Windows 8. That's because engineers didn't even bother to make that possibility happen. Just Google: "Transfer from windows vista to windows 8" and you'll see
    there are no relevant Microsoft web page about this.
    Worse, Microsoft is giving excuses. To solve this issues, they came with a toolbox of fake scenarios in order to confuse clients even further, while they know damn well the Windows Easy Transfer is NOT EASY and certainly in multiple cases
    DOES NOT TRANSFER jack to begin with.

    I somewhat agree with you.
    Trying to transfer from 7 to 8.1 and although it looks like the "7" side of the equation is working, the "8" side isn't.
    "7" is trying to connect to "8" but "8.1" is being just plain stupid.
    Not even sure why the MIG file step is even necessary if all I want to do is transfer one file between two machines.  Said file is really BIG, or i'd just use my network, and the "8.1" rig doesn't have a dvd reader...
    Per the MIG step... my file again, is big... I'd need to "mig" this file just to send it? Can't even get to the step where I'd mig-it and if i did, how long would that take?
    So this is what progress is all about... geez... gimmie a NULL MODEM CABLE !!!

  • How do i convert my music and pics over from windows to mac using a external hard drive.

    New mac user.  How do i convert my files from windows to mac using external hard drive.  I am using a Seagate freeagent go flex.

    leave as is and add NTFS driver to write to the drive / migrate maybe / reading NTFS drives isn't always perfect, some times external drive case has trouble mounting or staying mounted and suffers slow copy speed after awhile or with large files which is why I suggest Paragon NTFS for Mac OS X.

  • Boot Camp And Viewing\Editing Files From Windows

    I just ordered Leopard and I'm going to putting it on my 20 Imac next weekend. My plans are to install Windows Vista home premium through boot camp. Is there a way to access files from Windows on Leopard and vice-versa? I have MS Office for Mac and Windows and I do photo editing and it would be nice to access and edit files as needed whatever OS I'm without having to reboot. Some kind of third party software available for this? Parallels is OUT OF THE QUESTION for me. I tried it a few months ago and it was nothing but a nightmare. Left me with a really bad taste for it.
    Thanks.
    pt

    Thanks Kappy,
    I did a quick look at MacDrive and looks like what I was wanting. Will download the trial after my transition. Another question: When I install and setup Boot Camp will there be an option to format the partition in NTFS or does it do it by default?
    Thanks again for the tip on MacDrive. I've only had this Mac for about 6 months and just learning what is probably old news to you.
    pt

  • Sender file adapter is not picking the file from windows server

    Hi Experts,
    We have a sender file adapter running on Unix server. Now we have changed the source directory path from Unix to Windows in file access parameters.  It is not picking the files from windows directory and not showing any error.
    In this scenario, input file for sender adapter is *.xml and no content conversion.
    Could any one please let me know is there anything needs to changed in file adapter.
    Thanks in advance,
    Sridhar. M

    Sridhar,
    What do you have in the directory path?
    If it is a shared drive in unix then the directory in windows should also be a shared drive from XI system. Else if it is FTP check the address.
    Regards,
    ---Satish

Maybe you are looking for

  • Set variable via Javascript

    I got a long string (length exceeds 32512) from Javascript, and want to pass the sting to a variable to a item called P_SQL I use *$x("P_SQL").value* in javascript to set the value, but my process couldn't get the value before I submit, however, when

  • Not one of the possible agents WS12300111

    This issue is very similar to the one described in following thread, although I already tried all the hints in that one: Dynamic Action. I have defined the wf as a general task as described in the other thread and I even put me and my entire org. uni

  • HELP---How can i save pics ???HELP

    I have a problem. i drwa e.g. a rectangle in green. how can i save this rectangle? has anyone examples? thanks thomas

  • I am having Problem with my website designs!

    I am a blogger and i designed a template using dreamweaver, but some buttons i created are not working properly, can you guys help me out to sort out the problem? TheDogMag Bachelor Bawarchi Kiseijuu: Sei no Kakuritsu|Parasyte The Maxim These are my

  • Mult read in parallel from several instance on shared objects

    Hi, I created a root class and a area to store objects in the shared memory. Everything works fine I can write the class (from one process) into the shared memory. I can also read the class instance (form another process) from the shared memory. Now