Need to create New pricing type - VA05

Hi,
I need to create a new pricing type like C (When u do update the pricing from VA05). i am doing trail and error method to the STEU table. can anybody through some light on this, to create the new pricing.
I need to delete one condition and need to update new conditions type.i went through the note 24832.
Thanks in advance.
Sri

Hi Madhu,
I need to create new pricing type like C, going to use Customer reserve - Y(VA05->Edit->New pricing). and it should be able to delete the one condition and add new condition when user used it.
I hope it is clear.
Thanks,
Srikanth

Similar Messages

What is the need of creating New order type in PO

Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.A

Hi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki

How can we create new pricing requirement for a condition type

Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
Mark

Hi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá

Steps to create new movement types

Hi Folks,
I need to create new movement type, please let me know the steps that i need to follow.
Thanks,
Regards
Raghavendra

Dear
Please follow the steps in below link and create new Movement type
http://www.sap-basis-abap.com/sapmm015.htm
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
Regards
Aamir

Creating new pricing condition type in srm ecs

Hi Guru's
I see that there is an option to select the Source system " local" , "other system, eg: R/3" while creating a new condition type in SRM. can you please let me know what is the importance of this? can we determine price in srm using backend pricing conditions? can we invoke the backend pricing procedure from srm and populate the price in SRM PO?
any helpful info would be appreciated
regards
deepu

Hi Nitin,
Appreciate your response. Can you please let me know how major development is it? if you can provide highlights that would be helpful. I do understand that we can customize the pricing procedure in SRM. Can you please share if you have any documentation regarding creating new condition types, access sequences, condition records in SRM similar to ECC? it would be appreciated if you can send it to pradeepwsu(gmail) id.
Thanks in advance
Deepu

To write new pricing type at the copy control

None of the pricing types meet my need at the copy control (from the delivery to the billing document at item level). At which transaction code can I write a new pricing type? I couldn't find it at VOFM (maybe because I couldn't see).
Thanks in advance for the answers...

In VOFM, from top menu bar, if you click "Copying requirements", you can see various selection options like Sale Order, Delivery, Billing etc. You need to select Billing and create a new routine there.
thanks
G. Lakshmipathi

How to create new text type in PLMD_AUDIT

Hi All,
I need to create new text fields in addition to the existing Text types in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
guide me.
With Regards,
San Rao

Hi san. rao
If you need to create that, you need to go ABAP development. In sap Audit management is not a sophasticated tool for all kind of audits. In the Audit component only you will find the extra text type Audit location. other than that you will find description and note.
thanks &regards.,
kamal

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

Order types, why do we need to create our order types and not use the stand

HI
Order types, why do we need to create our order types and not use the standard ones during implementation.

Hi Raj,
Well there is no hard and fast rule that you have to copy nad create a new order type. Its just to meet our own requirements that we copy the standard and make the changes if required to meet our business needs.
And by this way we keep unchanged the standard order type for further use.
If you are sure that the standard order type satisfies your need you can directly use that only.
I hope this clarifies the issue.
Do reward if find useful
Regards,
Abhi

To create new billing type and document type and put restriction for any pa

Hi,
please let me know the procedure for creating new billing type.
Can we restrict billing type to document type for any particular country by defining it in user exit.
Rgds,
Dharmesh

Hi,
>
> please let me know the procedure for creating new billing type.
>
Goto menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Define billing types. Here highlight one of the standard SAPbilling type (which may be relevant to your business requirements), then click on copy as button to create a new one. You need to name that should start with Z, for example ZF2 and then save it.
>
> Can we restrict billing type to document type for any particular country by defining it in user exit.
>
This you can achieve in copy control settings. Go to menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Maintain copy control for billing documents. Here you can select, according to your scenario, copy control to deliverydocument to billing document or Sales docuement to billing document.
Then, here also you can copy the standard copy control document types provided by SAP, and rename to your newly created Zdocument type. The source doucment (delivery or sales order) is normally assigned to a particular sales organization (which to a company code). Normally the company code is created in a particular country, hence the billing document falls only on that country.
Regards,

VA11 create new inquiry types

Hello Gurus,
Can anyone tell me how from SPRO I can create new "inquiry types" related to the transaction VA11 so that I can chose them from a drop down list using the F4 mode?
Many thanks
Chris

Goto SPRO-> Sales and distribution -> Sales->Sales document header ->Define sales document type.
Then hightlight the document type IN and click on the copy button on the top.
Rename to Z-document type like ZIN and then save.
Now check in VK11, you can find the new document type. You have to first configure in SAP development system and then after testing you need to move to other systems.
Regards

What we need creation of new movement type ? when will be used?

Dear guru,
pls clarity

Hi Sai,
Many a times you want to post value of some transactions to different G/L account for the same material depending on scenarios..like scrap generated at x process...scrap generated at y process etc..
So this will be done through creating new movement types
Regards,
Rohan

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Problem in creating New output types - Urgent

hi all,
Issue is that we had created a new plant(NSC) and for that plant, we had created new scripts for Indent and Sales Order. Means I have to create new output types for NSC Orders and Indents.
What i did that I went to SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents , created new output types ANSC and BNSC for AN00 and BA00 respectively.
Then Output Types assigned to Partner Functions. Then I went to 'Maintain output determination procedure' and copied V06000 (Quotation Output) and V10000 (Order Output) to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) respectively.
Then I went to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) determination procedures and changed outputtypes to ANSC and BNSC instead of AN00 and BN00.
Now what should i do next?? I went to 'Assign Output determination procedures' but here no new entries can be added and I cant find procedures which I created.
Any ideas please??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

HI,
follow this steps:
1. In assignment u have to assign ur new output to respective documents
eg: Assign ZV0000(NSC Quotation Output) to QT sale doc type
2. After doing this u have to maintain condition record
goto tcode: VV11-> here enter ur condition type which u have defined-> inside fill in the details--> now click the <b>communication</b> ikon in top--> fill in the details
this is solve ur purpose
regards,
Arun prasad

How to create new agent types in transaction CBIH92.

Hi guru's,
Can anybody tell me how i can create new agent types .
thanks and regards,
Pronoy.

Hi Pronoy
Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
Hope it will help you.
Regards
Vikram

Need to create New pricing type - VA05

Similar Messages

Maybe you are looking for