Need to do switches configuration archive using the cisco works LMS 3.2

Hi folks,
        We have a cisco works LMS 3.2 bundle which contains Resource Manager Essentials 4.3.0 . I am trying to do config archive of all our network switches using RME. I have no idea how to do it . so i came here ...
Guide me what are the things to be done in both switch side and RME side.

Hi Mohammed,
You can do this from here :
RME > Admin > Config Mgmt > Archive Mgmt
check the below linlk for more information:
[Do rate the useful post]

Similar Messages

  • Firefox is configured to use the Cisco ScanSafe proxy but althought IE manages local webservices correctly, Firefox does not

    We are testing Cisco ScanSafe, a SaaS proxy/web protection solution. You use it be filling in a proxy server on port 8080. In IE everything works fine but Firefox seems unable to distinguish local from internet sites. I have a host that I approach with http://bugzilla2 that Firefox keeps on sending through the proxy which it shouldn't as I have configured the exception in the no proxy setting to exclude

    go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
    ''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    I have the following scenario for the installation of EPM 2013 environment:
    1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
    1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
    After configuring and validating the configuration of Workflow 1.0 by page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
    Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
    "Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
    I've tried:
    a. Restart SPD2013;
    b. Restart Server 2013 and Sharepoint Workflow 1.0;
    c. Reinstall and reconfigure Workflow 1.0
    And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
    Can anyone help me, I'm in the middle of a deployment to a customer.
    Print of alert

    How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be [email protected]
    "If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
    templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
    You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT2188 i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/s

    i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen

    Have you downloaded and installed the latest version of iTunes from here:

  • I need to tell Print services to use the 2nd ethernet port

    I need to tell Print services to use the 2nd ethernet port
    Thanks in advance to anyone who can shed some light. My research has led me to a dead-end so far. Running 10.3.9 on my server. XServe Dual 2.3
    I want to have File services and the various other duties pushed through one ethernet port, and print services on the other. I know there is probably a config file to make one simple edit, but I can not find it, or perhaps a "defaults" type command.
    Also, where is this "command-line administration guide" that I keep running across on Apple's support?
    Thanks in advance.

    Similar issue here too. Is it the subnet? Basically, I'm having a problem printing to an AirportExpress-served printer. Our network looks like this:
    (From Outside...>>> Inside)
    (Public IP) DSL Modem
    ...(10.0.0.x) Airport Express -- HP DesignJet 100 USB -- Airtunes/stereo
    ...(10.0.0.x) NetGear Wireless Router
    ...(10.0.0.x nic 0) Mac OS X Server (192.168.0.x nic1)
    ......(192.168.0.x) Mac OS X client
    ......(192.168.0.x) Mac OS X client
    ......(192.168.0.x) Mac OS X client
    The printer driver does not appear to be able to do IP printing, it assumes a direct USB connection. We can setup the OS X Server with the printer served by the Airport Express, as it is found via Bonjour, and then we share its queue via Server Admin. The problem is that the LAN clients cannot print to this server queue. The printer gets stopped at the server.
    If we turn OFF the OS X Server's firewall, printing works from both the clients and obviously from the Server. I think my question is this: what ports or services need to be turned on in order for the clients to print? There is no clear checkbox for "Bonjour Printer Sharing", and I'm curious what ports this would open, and if it would be safe. I thought it would work because we're pushing the print job up through the firewall, but apparently some response needs to come back through the firewall, and that's what's not happening.
    And to tack onto this, how could we also push iTunes to the Airport Express from the Clients? Assuming the music goes over different ports than the print jobs. ?
    Thanks in advance for any help.

  • My phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

    my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

    Hello 3m4nz4,
    After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    iOS: Not responding or does not turn on - Apple Support
    Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
    Does not return to the Home screen after you press the Home button
    Does not wake from sleep after you press the Sleep/Wake button
    Does not turn on (or power on) when you press any button
    Does not start up past Apple logo
    Appears frozen or unresponsive
    Is unable to "Slide to Unlock" or "Slide to Power Off"
    To troubleshoot these symptoms:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thank you for contributing to Apple Support Communities.

  • Ask the Expert: Configuration and Troubleshooting the Cisco Application Control Engine (ACE) load balancer

    With Ajay Kumar and Telmo Pereira 
    Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about configuration and troubleshooting the Cisco Application Control Engine (ACE) load balancer with Cisco expert Ajay Kumar and Telmo Pereira. The Cisco ACE Application Control Engine Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is a next-generation load-balancing and application-delivery solution. A member of the Cisco family of Data Center 3.0 solutions, the module: Helps ensure business continuity by increasing application availability Improves business productivity by accelerating application and server performance Reduces data center power, space, and cooling needs through a virtualized architecture Helps lower operational costs associated with application provisioning and scaling
    Ajay Kumar  is a customer support engineer in the Cisco Technical Assistance Center in Brussels, covering content delivery network technologies including Cisco Application Control Engine, Cisco Wide Area Application Services, Cisco Content Switching Module, Cisco Content Services Switches, and others. He has been with Cisco for more than four years, working with major customers to help resolve their issues related to content products. He holds DCASI and VCP certifications. 
    Telmo Pereira is a customer support engineer in the Cisco Technical Assistance Center in Brussels, where he covers all Cisco content delivery network technologies including Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), and Digital Media Suite. He has worked with multiple customers around the globe, helping them solve interesting and often highly complex issues. Pereira has worked in the networking field for more than 7 years. He holds a computer science degree as well as multiple certifications including CCNP, DCASI, DCUCI, and VCP
    Remember to use the rating system to let Ajay know if you have received an adequate response.
    Ajay and Telmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum Application Networking shortly after the event.
    This event lasts through July 26, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

    Hello Krzysztof,
    Another set of good/interesting questions posted. Thanks! 
    I will try to clarify your doubts.
    In the output below both resources (proxy-connections and ssl-connections rate) are configured with a min percentage of resources (column Min), while 'Max' is set to equal to the min.
    ACE/Context# show resource usage
            Resource         Current       Peak        Min        Max       Denied
    -- outputs omitted for brevity --
      proxy-connections             0      16358      16358      16358      17872
      ssl-connections rate          0        626        626        626      23204
    Most columns are self explanatory, 'Current' is current usage, 'Peak' is the maximum value reached, and the most important counter to monitor 'Denied' represents the amount of packets denied/dropped due to exceeding the configured limits.
    On the resources themselves, Proxy-connections is simply the amount of proxied connections, in other words all connections handled at layer 7 (SSL connections are proxied, as are any connections with layer 7 load balance policies, or inspection).
    So in this particular case for the proxy-connections we see that Peak is equal to the Max allocated, and as we have denies we can conclude that you have surpassed the limits for this resource. We see there were 17872 connections dropped due to that.
    ssl-connections rate should be read in the same manner, however all values for this resource are in bytes/s, except for Denied counter, that is simply the amount of packets that were dropped due to exceeding this resource. 
    For your particular tests you have allocated a min percentage and set max equal to min, this way you make sure that this context will not use any other additional resources.
    If you had set the max to unlimited during resource allocation, ACE would be allowed to use additional resources on top of those guaranteed, if those resources were available.
    This might sound a great idea, but resource planning on ACE should be done carefully to avoid any sort of oversubscription, specially if you have business critical contexts.
    We have a good reference for ACE resource planning that contains also description of all resources (this will help to understand the output better):
    1) When a resource is utilized to its maximum limit, the ACE denies additional requests made by any context for that resource. In other words, the action is to Drop. ACE  should in theory silently drop (No RST is sent back to the client). So unless we changed something on the code, this is what you should see.
    To give more context, seeing resets with SSL connections is not necessarily synonym of drops. As it is usual to see them during normal transactions.
    For instance Microsoft servers are usually ungracefully terminating SSL connections with RESET. Also when there is renegotiation during an SSL transaction you may see RESETS, but this will pass unnoticed for end users. 
    2)  ACE will simply drop/ignore new connections when we reach the maximum amount of proxied connections for that context. Exisiting connections will continue there.
    As ACE doesn't respond back, client would simply retransmit, and if he is lucky maybe in the next attempt he will be able to establish the connection.
    To overcome the denies, you will definitely have to increase the resource allocation. This of course, assuming you are not reaching any physical limit of the box.
    As mentioned setting max as unlimited might work for you, assuming there are a lot of unused resources on the box.
    3)  If a new connection comes in with a sticky value, that matches the sticky entry of a real server, which is already in MAXCONNS state, then both the ACE module/appliance should reject the connection and that sticky entry would be removed.
    The client would at that point reestablish a new connection and ACE would associate a new sticky entry with the flow for a new RSERVER after the loadbalancing decision.
    I hope this makes things clearer! Uff...

  • Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process

    Can I use the Cisco license transfer tool to rehost licenses from router 2900 to new router 2900? is not rma process
    thank you

    Yes you can. 
    Alternatively, you can email [email protected]

  • Cisco works LMS 3.0.1 does not archiever configuration for cisco 7201 router

    Hi All,
    We have Cisco works LMS 3.0.1 and it does not archiever configuration for cisco 7201 router.
    Any help would be appriciated.
    Thanks in advance

    *** Device Details for d0151-100 ***
    Protocol ==> Unknown / Not Applicable
    Selected Protocols with order ==> TFTP,SSH,HTTPS
    Execution Result:
    Unable to get results of job execution for device. Retry the job after increasing the job result wait time using the option:Resource Manager Essentials -> Admin -> Config Mgmt -> Archive Mgmt ->Fetch Settings
    This is the error while doing syn archieve.
    I am not sure about Rtr7000 version but we have latest Rtr7000.
    Waiting for your kind reply.

  • Cisco Work (LMS 2.6) Device Configuration

    Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
    Thanks & Regds,

    if you enable the so called shadow directory feature under:  Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
    then the defaut location is \CSCOpx\files\rme\dcma

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

  • Need to upload mass excel sheet using the bapi bapi_acc_document_post.

    I am assigned with an object, where I need to post the records from a mass excel sheet in to ECC or/and BW basing the dimensions using the bapi bapi_acc_document_post.the excel sheet has header and Item data. I am pretty much new to this bapi's
    please do the need ful

    this report calls BAPI "BAPI_ACC_INVOICE_RECEIPT_POST",
    but the parameters are nearly the same.
    Best Regards, Dirk

  • Do I need iPhoto 08 to see and use the mobileme features?

    I currently have the iPhoto (ver 6) that came with my Mac Pro. I have a lot of expensive photo editing software on my mac that I do graphic design with so spending $80 on the iLife upgrade seems like a waste of $$ to me. I would however like to use the Mobile Me icon that appears in the Mobile Me demos to move photos to and from my iPhone 3G as well as the Mobile Me website. Do I have to upgrade to iLife 08 to get this or can I make this work with iPhoto 6?
    Thanks for your help!
    Will H.

    I would however like to use the Mobile Me icon that appears in the Mobile Me demos to move photos to and from my iPhone 3G as well as the Mobile Me website.
    iPhoto does not need to be part of this at all, but if you want it to be then you'll need iPhoto 08.

  • Why do we need a Self Reference "me" to use the components of a class

    I am not clear why do we need a self reference variable "me" to call the components of its own class? when it can be accessed directly as in the following examples?
    In my first example below i can call the method display_name directly without creating a reference object or instance of the class within the class.
    In the second example i am using the self refernce Write me->name to access the component of a class.
    My question is why do we need "me" when i can use the components directly as shown in my first example.
    CLASS egocentric DEFINITION.
         name(10) TYPE c READ-ONLY.
        METHODS set_name.
        METHODS display_name.
    ENDCLASS.                    "egocentric DEFINITION
    *       CLASS egocentric IMPLEMENTATION
      METHOD set_name.
        MOVE 'Abap Objects' TO name.
        CALL method display_name.
      ENDMETHOD.                    "write_name
      METHOD display_name.
        write: name.
      ENDMETHOD.                    "display_name
    ENDCLASS.                    "egocentric IMPLEMENTATION
    *Global Data
    DATA oref TYPE REF TO egocentric.
      CREATE OBJECT oref.
      CALL METHOD oref->set_name.
    CLASS egocentric DEFINITION.
            PUBLIC SECTION.
                 name(10) TYPE c VALUE u2018Instructoru2019
                 METHODS write_name.
            METHOD write_name.
                WRITE me->name.
    *Global Data
    DATA oref TYPE REF TO egocentric.
            CREATE OBJECT oref.
            CALL METHOD oref->write_name.

    You can go WIKI and search with ABAP Objects.
    Or do the same in 'advanced search'  and select a search area. You are bound to find something.
    Or this link perhaps:
    [abap objects|]

Maybe you are looking for

  • ECATT - Help help help

    Hi, It's 1 month that I try to create an e-catt like old SCAT .. but as you can see I'm not still be able  ..... I'd like to create a test case related to a SAP transaction, I'd simply like to change the vendor name (FK02), data to be changed should

  • Changing PF status of Web dynpro ALV

    Hi Experts,   In Web dynpro ALV there is a button called "EXPORT" with two menu items(Export to Microsoft Excel & Export to BOE). I would like to add two more menu items to that button. Is it possible. If yes, how? Thanks and regards, Venkat.

  • Trial Download Links For SAP Netweaver 7.01 Invalid

    The only available trial links for SAP Netweaver are for version 7.01. Both of these links are invalid and you receive a File not found error.

  • Material type change for split valuation

    We have to change to material type for materials having split valuation. Suggest the required

  • Powerbook Ti will occasionally not wake from sleep mode

    When I put my powerbook in sleep mode, either it will wake, or it will wake but the screen will be blank. The HD will have turned on, the pulsating light will have turned off, and you can hear the fan running. I'll then have to force shutdown and res