Need to extract MPAN on the basis of AUFNR.

Hi
I working on one Outbound idoc.
The program is triggered by batch program and it will pass "Service order number (AUFNR)". I need to extract  the value of field  "MPAN"( i.e. "int_ui", "ext_ui" )by passing AUFNR .
please advise.
Vibhor Goyal
Edited by: Vibhor Goyal on Feb 23, 2009 12:19 PM

Hi Ankit,
You will have to create your own program to do this.
There is no standard way todo this.
Best regards,
Ramki

Similar Messages

  • Need to Create delivery on the basis of sales order and schedule line

    Hi,
    I need to create delivery on for sales order which is splitted in schedule line number (ETENR).
    I am using FM RV_DELIVERY_CREATE and passing sales order number with single line item at a time for different (schedule line) VBEP-ETENR. but it is creating the delivery for all schedule line  items in first time only and in second loop it is not returing any thing even error. can any one please suggest me  urgently what can I do for it.

    Hi Ankit,
    You will have to create your own program to do this.
    There is no standard way todo this.
    Best regards,
    Ramki

  • Extract data into the Oracle Database

    Hello,
    I have file in PDF format.
    I need to extract data into the Oracle Database.
    what should be my action ?
    And how could I accomplish?
    thanks
    DN

    You said:
    Do you know ahead of time how many columns are in the file?
    yes, It has 8 columns.
    But each PDF have different total of columns. Right now I am working on one PDF file only.
    e.g: page emp report has following values:
    Salray History Report in PDF format
    Page 1
    Date 10-21-2005
    LAST NAME SALARY COMMISSION
    Russell 14000 .4
    Partners 13500 .3
    Errazuriz 12000 .3
    Cambrault 11000 .3
    Zlotkey 10500 .2
    after converting it will be come as
    Salray History Report in PDF format
    Page 1
    Date 10-21-2005
    LAST NAME
    SALARY
    COMMISSION
    Russell
    Partners
    Errazuriz
    Cambrault
    Zlotkey
    14000
    13500
    12000
    11000
    .4
    .3
    .3
    .3
    End of Page 1
    Date 10-21-2005
    LAST NAME
    SALARY
    COMMISSION
    DN

  • How to dynamically form the base URL for a region?

    For Application Express 2.2.1, I've created a URL region for a static html page:
    e.g.
    http://xxxx-dev.website.com/html/page1.html
    The problem is that when I promote this application to production (using export/import), this URL still refers to the development website.
    I need Application Express to use the base URL of its current URL path rather than http://xxxx-dev.website.com
    Can this be done?
    Thanks

    Hello,
    If you omit the http:// part from your static URL, the APEX engine will automatically attached the local server prefix to it.
    Regards,
    Arie.

  • Billing in the basis of billing plan for multiple schedule lines

    Hi All,
    I have one scenario in which we have created milestoen billing via project systems in sales order. Now Suppose I have three line items in my sales order and against each line items we have maintained multiple schedule lines. ex. 10%, 40%,50% respectively. Similarly for other line items also we have maintained the same. Now I need to generate invoice on the basis of schedule lines(billing plan). for ex. single Invoice covers 2 schedule lines out of total schedule lines in the line item. Similarly for other line items.
    Kindly guide.
    Thanks.

    Hi
    Your milestone billing plan integrates with PS means that you have an order related billing.
    Hence schedule line is a confusing word and I assume it as a billing plan.
    Each milestone-related billing date is blocked for processing until the Project System confirms that the milestone is completed. The billing block will automatically be removed once the milestone is achieved.
    Do maintain copy controls properly at item category level (VTFA) and your billing should happen standard SAP way.
    If still you face any errors, please post the screenshots.
    Thanks
    Atul

  • ***CALLING ALL MACBOOK AIR USERS*** Will the base model of the 2013 Macbook Air 11" be enough for my needs?

    Ok,
    This is my first post to this forum.
    I have a Late 2011 i5 Macbook Pro. I used this last year during college but the weight was just unbearable. I have decided this year to upgrade to a Macbook Air. Here is my question.
    I am starting uni and will be studying Nursing and so I will not be using any heavy software or progaming etc.
    The only thing I will use is Office for Mac and browsing. I normally keep around 15 browser tabs open whilst I research.
    I also like to download so I would also like Vuse on my Macbook too. I own an external hardrive and so memory isnt a big deal (unless it makes a difference to the performance of the mac itself, Sorry im not great with this stuff)
    Do you guys think the base model of the 11" Macbook Air (1.3ghz, 4GB ram, 128GB SSD) will be enough for my needs or do you think I would need to custom build it (1.7ghz, 8GB ram, 128GB SSD)?
    My boyfriend thinks for what im using it for the base model will be fine but I dont want to get it to find that its not enough as my main concern is lag but I also do not want to pay extra for something which isnt going to be fully used (ie my current Macbook Pro).
    For those of you who do have the 11' Macbook air, how are you finding it? Also, this will be my main computing device, I am selling my Pro but am thinking of buying the wireless keyboard and trackpad so I can connect to an extenal monitor whilst im at home.
    Thank you guys in adavnce for any answers.

    I too have a 2011 mackbook pro and I also have a mid 2012 mackbook air 128 gb ssd and 4 gb ram , I am probably goint to sell the pro because I just don't use it anymore . If you intend to do heavy multi tasking 8gb ram as suggested by a previous poster might be worth the extra money.

  • I want to set up a roaming network. I have directions. I have an extreme set up and working.  I need to add an express.   When I open airport utility I get the internet pic of internet and the base station.  How do a get to the setting screens?

    Directions require that I change settings on the base station on the screen that interent connection, TCP/IP DHCP NAT how do I get to that screen through airport utility.
    Then I need to for my express to get to the screen the screen for wireless.
    This has changed since last time I did this.
    How do I get to the screens.

    Your existing Extreme might already be configured in Bridge Mode. As long as the Extreme is working now, do not change any settings on the Extreme.
    Apple incorrectly assumes that all users are connecting to a simple modem when most users are connecting to gateway devices....combination modem/routers. 
    You probably are as well and Bridge Mode would be the correct setting when connecting to that type of device.

  • I just purchased an airport extreme router to increase the range of    my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    sylviafromhanover wrote:
    So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that. 
    Yes, that is correct.
    Did you have the instructions that came with your Airport Extreme?  Are you sure you have it setup properly?  Here is the setup guide:
    http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf 
    Ensure you have everything setup properly.  Once you do this and if you are still having trouble, follow Star's instructions. 

  • My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
    I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
    If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • I have several macs with Intel core duo 2 operating systems. All are running os x10.6.8. Is it necessary to upgrade to Lion before upgrading to mountain lion when it comes out this summer? Do I need to have the "base" version of 10.7?

    I have several macs with Intel core duo 2 operating systems. All are running os x 10.6.8. Is it necessary to upgrade to Lion before upgrading to Mountain Lion when it appears this summer? Do I need to have the "base" version of 10.7 first?

    This is unknown, it will be up to Apple and AFAIK they haven't announced that yet.

  • I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

    I have an old Airport Extreme that I want to password protect. I being told that Airport Utility 5.6 is needed to manage the base station. When I download it and try to install that utility I told that it is not compatible with OS X 10.7.4

    The odds are that you downloaded AirPort Utility 5.6.1.....which will only work with Leopard and Snow Leopard Macs.
    Since your post indicates that you are using Lion 10.7.4, you need the correct utility for Lion. The link is below:
    AirPort Utility 5.6 for Mac OS X Lion

  • Need to Extract the Data From "0BBP_TD_CONTR_2"

    Hi,
    I need to extract the data from SRM extractor "0BBP_TD_CONTR_2". I do not have much knowledge in SRM. Can any one give me the steps how can i check the extractor its not like R3. All kind of help will be appreciated.
    Thanks

    Never mind guys i figured it out. Thnaks

  • Need to know the base tables for the QM datasources

    Hello SAP Experts,
    I want to know the base tables for the below mentioned datasources which stores the transaction data.
    1. 2LIS_05_QE1:  Inspection Characterstics Results
    2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
    3. 2LIS_05_QVUDN: Usage decision for Inspection
    Need your inputs.
    Thanks,
    Lasya.
    Edited by: lasya john on Dec 10, 2008 8:28 PM

    Hi Lasya,
    You can use help.sap.com for this.
    If you do not find this data source there...then
    You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
    Click on that ...and go inside it in the display mode.
    Here you can see a generic pool of fields on the left side which can be included in the data source........  field present in the data sources in the right side of the pool.
    For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
    So the field is being from that particular table.
    Even I would the same thing to reply to your thread.
    You can follow the same procedure to find the table for any LO data source.
    This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
    Hope it helps.
    Thanks
    Ajeet

  • I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

    I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

    In Editor, go to the expert tab.
    Open picture B, the one you wish to select the radio from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

Maybe you are looking for