Need  to find the class type for a material

Hi all,
i need to find the class type for the material.
is there any FM or the table where i have both MATNR and KLART fileds.
Kindly reply asap.
Thanks
Sri

Hi,
There can be multiple class types assigned to a material. You can view this in the classification tab in the material master transaction.
You can pass the MATNR to OBJEK field of KSSK table after using neccessary converison Exit to get KLART(Class Type). It will return you a 3 digit Class type. You can find the description of the class from the class type master table TCLA.
Hope this helps.
Edited by: Priyabrata Samanta on Feb 11, 2008 11:43 PM

Similar Messages

  • From which table I can find the "Class type" and "Class" of the material?

    From which table I can find the "Class type" and "Class" of the material?
    Thanks in advance for the answers....

    Hi,
    try following table
    KSSK     Material number to class     
    KLAS     Class description     
    KSML     Characteristic name     
    CABN/CABNT     Characteristic name description     
    CAWN/CAWNT     Characteristic name
    [http://www.sap-img.com/materials/classification-view-of-material-master.htm]
    [http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
    Regards
    kailas Ugale

  • Cannot find the class file for com.sap.portal.services.api.connectorgateway

    Hi,
    I was trying the "How to BI JAVA SDK in a Portal iView and get the following error.
    The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService. Fix the classpath and try rebuilding this project.
    I have the following in my portalapp.xml file
    <property name="SharingReference" value="com.sap.portal.ivs.connectorservice"/>
    and i have also added the jar file "com.sap.portal.ivs.connectorservice_api" in the set of lib's
    Has some faced a similar issue? or can someone suggest how I could possibly resolve this.
    Thanks,
    Smitha

    Hi Smitha:
       My webdynpro dc was build failed for "This compilation unit indirectly references the missing type com.sap.engine.services.webservices.espbase.client.dynamic.content.GenericObject (typically some required class file is referencing a type outside the classpath)".
    How should i do?  Thank you!

  • HT4910 I need to find the file location for my iCal in iCloud

    I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

    You should find "Preferences" in your Edit menu in iTunes.

  • How to find the message type for application

    Hi Guys,
    while postnig the data through idocs,we use message types
    the issue is how can we find the massage type for application?
    plzz help

    You can find these in transaction WE82.
    You can find in WE57, this basis type, which fm is attached (BAPI_IDOC_INPUT1).
    Then check out transactions WE41 and WE42.
    You can use the table EDIMSG, in SE16 to list all the msg types making use of the same IDoc.
    or
    If you want to get all the message types, you can use WE81.
    If you want to see which message types are attched to a particular Idoc type, use WE82
    check it in BD60 and WE57..

  • Could not find the artifact type for property kind

    Team Foundation Server 2013 Update4  on Win Server 2008 R2, this message has suddenly started appearing.
    Team foundation error: Could not find the artifact type for property kind '77951f77-f29d-4a9b-8311-1b13e4b89c42'. The property kind was not properly defined.
    Last update installed was Update 4 on 17 Dec 2014, and at the time of install, everything was working well. I've re-applied update 4 in the hope it would resolve it, but the same error appears when I open the TFS console. Please help!
    Programming today is a race between software engineers striving to build bigger and better idiot- proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.

    Hi Stunt, 
    Thanks for your post. 
    And thank you for sharing your experience here. It will be very beneficial for other community members having the similar questions.
    All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hoe to find the Application type for  Script?

    Hi Guys,
                 Can antbody tell me how to find the Application type for a Form.?I was given a req with form name ZINVENT.He asked to make some changes to the exisitng form.
                the form is for Displaying Physical Inventory Documents.table is IKPF and ISEG.
                 I was not able to see in NACE tr Code becoz i dont know the Application.and i dont know the print program also,But he gave me the name of the program as RM071DRU, which i was not able to find the SE38 tr code
              So anybody can plz tell me what's the Application and print program?How can we find in NACE tr code?
    Thanks,
    Gopi.

    Hi Gopi,
    U can check the application type ME or M1 in NACE transaction.
    If not check the program name given to u in TNAPR table..where in u can find the application type and output type...
    Reward if useful..
    Venkat

  • More than one class type for a Material

    Hi All,
    We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
    But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
    I searched forum, it is given that, it is possible to maintain different Class types for a Material.
    But I tried, I couldn't do that.
    Please help me to extend a Material to another Class type.
    Regards,
    Raja Durai

    Hi Raja,
    You can maintain different classes for same material.
    Go to material master and go to Classification view. Go to Extras->Change class type (F7)
    Now you can add a class of different class type.
    Please see below snapshots for more details.
    Thanks,
    Dattatreya N R

  • Is it possible to maintain two class type for a material

    Dear All,
    Is it possible to maintain two different class type for a material.
    If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
    For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
    How to handle this scenario.
    Please explain.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

    Mr.Raja
    As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
    We can assign many classes to  a single class type of  a material.
    For configurable material, create the material using material type : KMAT.
    & then, activate the 'batch management" control in the material master, for that material.
    Pls revert with feedback.
    Hope, that helps you.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • How can we change the valuation type for a material created.

    How can we change the valuation type for a material created.
    Note : All open orders are closed for this material.3
    Please guide

    Hi,
    You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
    Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
    - you are not allowed to have open transactional data
    - no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
    - in case of valuation category setting batch archiving may be necessary
    BR
    Csaba

  • How to find the Class Type of a Class ?

    Hi,
    Can anyone tell how can I find a Class Type of a Class?
    e.g. I know the Class name as "Z_ABC" but do not know its Class Type, therefore, not able to display it in CL01.
    Regards,
    Lucky

    Hi,
    Just by entering the Class name in CL02 does not display the data because system asks to enter the Class Type as well.
    Rammohan - Thanks for thissolution however, when I executed after entering the Class Name, table displyed no entries found..... message but this class is being used in the PO Release Strategy. May be the data is being saved in some other table. Is there any other way to find this?
    Regards.

  • How to find the application type fora Script based on Form name?

    Hi Guys,
                can anybody tell me how to find the Application Type and output type based on Form name and print program name?
    I am having form name as: ZINVENT (INVENT is the actual) and program name as RM07IDRU.How can i find the Appliction ntype and OutType for entering into the NACE tr code.
                    i tried thru TNAPR table but i was not able to find the Entry in the TNAPR with form Name and printprogram name
                   Th Script is about Phsical inventory Documents.
    Thanks,
    Gopi.

    You can use this...
    REPORT  Z_DUMMY_ATG NO STANDARD PAGE HEADING.
    *======================================================================
    * Tablas
    *======================================================================
    TABLES: TTXFP.
    *======================================================================
    * Tablas Internas
    *======================================================================
    DATA: T_TTXFP TYPE STANDARD TABLE OF TTXFP WITH HEADER LINE.
    *======================================================================
    * Selection-Screen
    *======================================================================
    SELECTION-SCREEN BEGIN OF BLOCK SCRIPT WITH FRAME.
    SELECT-OPTIONS:
                  PRINTNAM FOR TTXFP-PRINT_NAME,
                  TDFORM   FOR TTXFP-TDFORM.
    SELECTION-SCREEN END OF BLOCK SCRIPT.
    *======================================================================
    * Start-of-selection
    *======================================================================
    START-OF-SELECTION.
      PERFORM SELECT_DATA.
      PERFORM PRINT_DATA.
    *&      Form  SELECT_DATA
    *       Seleccionamos los datos del reporte.
    FORM SELECT_DATA.
      SELECT TDFORM PRINT_NAME LAST_PROG
      INTO TABLE T_TTXFP
      FROM TTXFP
      WHERE PRINT_NAME IN PRINTNAM
        AND TDFORM IN TDFORM
      ORDER BY TDFORM.
    ENDFORM.                    "SELECT_DATA
    *&      Form  PRINT_DATA
    *       Imprimimos el resultado del reporte.
    FORM PRINT_DATA.
      FORMAT COLOR 3.
      WRITE: 'Programa', 18 'Formulario', 50 'Flag de Ultimo programa'.
      FORMAT COLOR OFF.
      SKIP 1.
      IF NOT T_TTXFP[] IS INITIAL.
      SORT T_TTXFP BY PRINT_NAME.
        LOOP AT T_TTXFP.
          IF T_TTXFP-LAST_PROG EQ 'X'.
          FORMAT COLOR 4.
          WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
          FORMAT COLOR OFF.
          ELSE.
          WRITE:/ T_TTXFP-PRINT_NAME, 18 T_TTXFP-TDFORM, 60 T_TTXFP-LAST_PROG.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "PRINT_DATA
    Greetings,
    Blag.

  • Need help finding the best Mac for gf

    hi I need help finding the best desktop. I am looking to buy MAC for gf.
    she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
    She has a 2009 Apple computer I want to upgrade her to a new one
    I Dont know much when it comes to specs. She edits tons of videos and pictures.
    what's recommended for a video/photo editor that's good in performance ?

    Pro consumer might go with iMac even.
    Final Cut Pro latest benefits from dual AMD graphics.
    Video is one animal, graphics a much different.
    Great site full of performance, buying and configuration ideas:
    MacPerformance Go to the main topics
    I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
    Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
    Barefeats
    Rumors Pro
    Visit the forum for FCP-X would be a place to start.
    Final Cut Pro X

  • Custom class type for Plant material

    Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
    thanks,

    Hi Rahul,
    The Classification data in material master can only be maintianed at Client level and not at plant level.
    The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
    Regards,
    kathir

  • Finding the batch genealogy for a material

    Hi ..
         How to find the batch genealogy of a material .
    Meaning if a material MAT_A is made from MAT_B of BATCH B
                         MAT_B is made from MAT_C of BATCH C
                         MAT_C is made from MAT_D of batch d.
    How to arrive  this?.
    Tharun Venkat

    Hi Tharun,
    You can use this FM 'CS_WHERE_USED_MAT' to find out the batch genealogy of a material.
    Hope this will help.
    Regards,
    Ferry Lianto

Maybe you are looking for