Need to Fix Bad Panning and Tilting

Hey I just watched some footage I shot with a DP, but unfortuntely the DP was not very good at panninga dn tiltiing so the subjects are not framed centered. Is there any way to fix that in FCP? I have a jib shot where they sorta go out of frame, but since I am keeping a wide frame as final cut there is a bit of left over frame I can work with to keep themn centered.
I really need to move the image so it starys centered throughout the clip. Not sure what tool I need. I tried Motion under viewer, but wasn't very successful. Any suggestions?

That would require zooming in on your footage...blowing it up larger than it normally is. And that will cause it to take a quality hit. As a rule, I never increase DV above 5%, and uncompressed 8-bit above 10, or it starts to become noticable.
Shane

Similar Messages

Pan and Tilt Camera Recording Duration

Whenever my Pan and Tilt camera motion sensor goes off, it only records 12 seconds and not the full 30 seconds it should. My other regular inside camera records motion for the full 30 seconds.
Anyone else notice this? I've looked for a setting but as of yet have not found one to change. If you know of one please let me know.
The time stamps on my email notifications show 20 seconds (28:50 - 29:10) but as you can see on the screen snapshot, it only shows 12 seconds. Just to say it before someone asks, yes the 12 seconds is the total time and not the remaining time. Sorry I just had to add that.

I use to have the same problems and found a solution. try this:
1. Export via Final Cut Pro using a quicktime export (not quicktime conversion!) Use your current settings. Now you should have a full quality exported Quicktime file.
2. From there, open DVD SP and go to your preferences. Click on the encode tab and set your SD encoding settings. I advise using
2 Pass VBR Best
Avg Bit Rate 5
Max Bit Rate 7 (I dont see the need for 9 as I have been told 7 does a similar job and saves room for audio bit rate)
Motion Estimatio: best
I like to set it for background encoding as well, but you can encode on build too.
3. Click the apply button
4. Now, bring in you full export file from step 1. You will see the progress in your asset tab (if you background encode). Done!
This should work for you as it has for me. I think the reason is because DVD SP does hardware encoding rather than software encoding, but this is only my guess. And FYI, compressor is completely fixed on mpeg2 encoding in version 3, but I still find myself using the above route simply because it has never failed me and is much more reliable.
Hope this works.

Creative Live Motion - Vista - no pan and tilt softwa

Everything seems to work. The driver installed perfectly and the webcam center also. Did anyone find or download pan and tilt software for this webcam for vista thanks much

Have found another used Creative Live Motion cam. I guess the one I have has got some malfunction.
Trying to replace some part of my new one from the donor old camera. Will post the result with pictures.
For all the people experiencing extremely slow frame rate, a non-documented and not known fix is simple. Just disable the Auto Exposure checkbox in the camera settings first tab and see the smooth results. Manually adjust the exposure to a reasobable value according to camera placement and enjoy.
Say thanks if your problem is solved.
Thanks.

MPEG2 pan and tilt artifacts using Compressor

Is there away to improve my Compressor/DVD Studio Pro MPEG2 encoding. I had decided to switch to DVD Studio Pro in order to get a better
quality encode. I find that it looks better everywhere except where
there is a camera move. If the camera pans or tilts, I get horizontal lines in
the video and it looks like crap.
I've been encoding through compressor using these specs
DVD Best Quality 90 minutes/ALL
Field Dominance: Automatic
2 Pass VBR Best
Avg Bit Rate 6.2
Max Bit Rate 9.0
Motion Estimation BEST
My project is a HDV 1080-60i Final Cut Pro v5.1.4 project.
I have been exporting a MPEG 2 file through Compressor using v2.1
Have you ever come across this problem? And if so, have you found away
for Compressor to handle motion better? Or should do you let DVD
Studio Pro encode? Does it do a better job?
Thanks!

Hi:
I find that it looks better everywhere except where there is a camera move. If the camera pans or tilts, I get horizontal lines in the video and it looks like crap.
That's the nature of interlaced video. Where are you judging in: Playing the MPEG2 in QT? DVDSP simulator? Did you build a disc and tested it in DVD player?
Try making a build in your hard drive and play the VIDEO_TS folder with DVD Player and set it to Deinterlace.
Hope that helps !
Alberto

I need to fix slowness, crashing and error messages upon sending

Using Mozilla Thunderbird for e-mail was working fine for about a year - then in the last month or so, it became extremely slow to send - often not sending at all - even short e-mails without attachments. I get errors such as not able to save to sent-mail and needing authentication, network issues, etc.

And your anti virus package is?

BIG PROBLEM WITH ZEN MICROPHOTO! I NEED THIS FIXED BAD

?Ok, Ii've already gone through a Zen Neeon and another ZPM because of different problems, but this one is the worst. I was listening to my player and then put in my side?pocket. ?When I pulled out the player which was shut off, I went to turn it on, it turned on normally, lighting up blue right? But then the blue light shut off and it just had the black screen saying "creative". I tried rebooting, disk clean, plugging into my computer, evcerything. f''''''ing a i? cant return this one because the warranty has gone up on it. I need help!! pleaaaseeee

But recently I gave this MP4 Player to their support in my country because buttons was corrupt (right button on the right side on the top and the same on down). They send it to centrale of Creative in my country and week later I received MP4 Player with new keys which work really good. So it would be stupid to go there again and do it the same, but for antoher problem...

Need Help Fixing Bad Color Profile (Leading to Bluish Tint)

Hi folks,
I've been experiencing problems with my late-2011 Macbook Pro for the past several months. Whenever it switches to dedicated graphics, the screen results in a bluish tint.
I believe it's a problem with the color profile on my machine. The diagnostic identifies two problems with the color profile, but the system is unable to fix the problem (see attached photo).
Does anybody know how I can fix this?
EDIT: I should note I'm running the latest version of OSX 10.8.4. I never experienced this problem with 10.7.x.

Header message digest (md5) is missing in Colorsync profiles

Need to fix bad audio that came attached to the video, any tips?

I have the video and the audio that comes attached to it is not good.Their voices are very low. When I try to make it louder there is this humming noise. When I try to reduce the background noise (it's like a hissing sound) then it sounds like she is in a fishbowl. It says the humming removal is "on"
Any ideas?
Thanks in advance.

Unfortunately, garbage in - garbage out.

Need to fix Set Alpha and other effects

too many effects still have glitches! Set Aplha blinks instead of setting alpha... others behave similarly... after 2 "new" releases of the software, you'd think glitches would get solved.... fail

Ranting (almost in two identical posts) has not much sense in a user forum: we are all users here, spending some free time to help other users. If you want to be heard by Adobe you should use other channels like bug reporting.
Lilybiri

Premier Elements vs. Pro for Pan and Zoom Photo Slide Shows

I am a professional architectural photographer. I need to create videos using a set of photos, and I need the ability to pan and zoom to specific parts of each photo. I need to be able to tell the software where to pan from and to, and where to zoom in or out. For example, I might start at the left side of a photo, pan toward the left side of the photo, then stop panning and zoom in. I need to control the speed of the pan and zoom, and control where they happen within each photo. I will not be dealing with video, only still photos.
I have seen a video demonstrating this capability in in Premier Pro. Can it also be done in Premier Elements?

rvomund
Please check out the Adobe document on it Pan and Zoom Tool and that feature's workspace
http://helpx.adobe.com/premiere-elements/using/pan-zoom-create-video-like.html
There is a difference using this tool for video versus stills. And, since you mention that you will be using just stills, I have
not gone into pan and zoom applied to video with this tool.
Please review and consider. If questions or need clarification, please do not hesitate to ask.
Before any purchase decisions, good idea to look at the free 30 day tryout of Premiere Elements 13 from Adobe.
ATR

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Wher

Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen. They presently move from one to another way too quickly...also need a different pan and zoom option. Where are all the options I had in PS10? Also...Can I burn this to a DVD?

The changes have brought improvements but also drawbacks compared with the old slideshow editor.
The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

I deleted aperture and now my sistem is acting crazy. I desperately need help fixing it.Can anyone help me please?

I deleted aperture and now my sistem is acting crazy.The dock disappeared and almost all icons are gone except for their names.I have an important project for tomorrow and I desperately need help fixing it.Can anyone help me please?

Well it all started with Aperture 3 trying to import some photos from my iphone.It took ages to import those photos and like I was in a hurry to finish my work in Illustrator so I tryied to force quit on A3 and it didn´t, so I shut down the computer and started over.it was all ok but I uninstalled the A3 and the I realized the icons were back to original form and a few fonts changed.so I Installed the trial version of A3.I did a restart of the system and then there was.aperture lauching but no dock and a 80% of the icons disappeared, but the names of the files and folder remained.and I cand acces the apps from the apple sign on the left corner.I tried also restarting a few time but it´s always the same.I am a recent user of a mac , and please excuse my bad english.If this is in any way useful please help me!

HT201210 I was watching tv... apple tv asked me to upgrade.. I did as asked.. it "bricked" the device... I contacted support... they said various forms of "too bad".. and wow "3 years old"!... they then said I MUST upgrade itunes to fix... of course .....

I was watching tv... apple tv asked me to upgrade.. I did as asked.. it "bricked" the device... I contacted support... they said various forms of "too bad".. and wow "3 years old"!... they then said I MUST upgrade itunes to fix... of course .....
They say my problem... I say apple's problem... company is in the gutter...
advise to all.... NEVER upgrade an apple product.
anyone need a brick? 928 899-8531 marc

[email protected]

HT4812 I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe

Need to Fix Bad Panning and Tilting

Similar Messages

Maybe you are looking for