Need to hide "Evaluating Condition" text in dashboard in OBIEE 11.1.1.6.7

Hi
We are using OBIEE 11.1.1.6.7 version and we are getting a message "Evaluating condition" while running a report.This is due to the conditions specified in dashboard section(guided navigation in 10g). So i need to hide those text in obiee 11g .In 10g we can able to make chnages in the backend files and we can hide this by following the url. But i need the similar paths in OBIEE 11g
http://obiee1000.blogspot.in/2012/01/hide-message-preparing-guided.html
Regards,
Diney

HI,
I know you already tried below method but it is working for me, could you please cross check.
Can you edit your dashboard prompt prompt and find show option then select SQL Result please modify statement like below.
Go--> Edit your prompt--> Show Option--> Select Choice List Values as --> Select Sql result---> change statement like above.
SELECT "tablename"."columnname" FROM "table" where "tablename"."columnname" is not null
OR,
Refer this thread might be helpful for you.
NULL Value in the prompt
Thanks
Satya

Similar Messages

FM9 crash during show/hide of conditional text

I'm having a vexing problem with two of my chapters: whenever I attempt to show/hide the conditions, FM9 crashes with "Internal Error 9004, 6921852, 9677150, 0. Framemaker has detected a serious problem and must quit".
A few things I've tried (as culled from posts on here):
Updating to FrameMaker p250 from p237
Saving as .mif, then opening and saving as .fm
Changing the conditions on all chapters with the book open
It's somewhat unpredictable. Saving as a .mif, then opening and saving as .fm worked once, but after performing an edit to the doc, it crashed again when toggling the conditions. Similarly, changing the conditions to all chapters with the book open seemed to avoid a crash, but trying it again crashed when it reached the problem chapter.
It's definietly something in the file, as my co-worker will occasionally get the crashes with the the same chapters when showing/hiding conditions, but not always.
Other details:
My XP installation is up to date with all the Microsoft updates
I'm using FM9 (unstructured)
The docs in question are not "fresh" per se, but have been upgraded from FM8 to FM9
Also:
Our documents have conditions A, B, C, and D.
In previous versions of Frame, we had been using the shuttle box interface for showing/hiding conditions: show A and B, hide C and D.
Starting with FM8, we started using equivalent logical expressions: NOT "C" AND NOT "D".
The crashing appears *not* to occur if I use the shuttle box interface. However, I'm told that we have use the logical expressions for some reason.
Any ideas are appreciated. Thanks!

SOLVED
Here's my fix for Internal Error: 9004, 6921852, 9677150, 0 when saving as PDF, printing PDF, or printing to PS from FrameMaker 9 using Acrobat 9. YMMV.
I could not reproduce this Internal Error: 9004, 6921852, 9677150,0 when using conditions, so I do not know if this solution fixes the condition-provoked instance of Internal Error: 9004, 6921852, 9677150, 0.
Anyway, I uninstalled FM, rebooted, searched for leftover files, deleted them, rebooted, uninstalled Acrobat Pro Extended 9, searched for leftover files and registry entries, deleted them (probably missed a few), rebooted, removed the Xerox Phaser PS printer driver for my local printer (because it was PostScript, figured I should), rebooted, installed the Xerox Phaser PS driver, rebooted, installed FrameMaker, rebooted, installed Acrobat Pro Extended 9, rebooted, installed each patch for FrameMaker and Acrobat Pro Extended 9, rebooted, installed the MS Hotfix discussed here (http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html), and rebooted.
All is now well for making PDFs.
Sean

Show/Hide conditional text at a book level

I am using TCS2 on Windows XP.
FM 9.0 p250
I have several files as part of a large FM book. Each file has the same text conditional tags. Can I, at a book level, set my conditions to show/hide, etc. and then update the book? So far, I only know how to open each file, set the SHOW/HIDE CONDITIONAL TEXT as I need it (not to show conditiona indicators and according to my built expression) and then save and close each file.
Is there a way to do all my files at once? Note- I want them all set the same way... so that might make it easier..
Thanks,
Adriana

adrianaharper wrote:
I am using TCS2 on Windows XP.
FM 9.0 p250
I have several files as part of a large FM book. Each file has the same text conditional tags. Can I, at a book level, set my conditions to show/hide, etc. and then update the book? So far, I only know how to open each file, set the SHOW/HIDE CONDITIONAL TEXT as I need it (not to show conditiona indicators and according to my built expression) and then save and close each file.
Is there a way to do all my files at once? Note- I want them all set the same way... so that might make it easier..
Thanks,
Adriana
I don't have FrameMaker available right now, so I'm working from memory, using the traditional FrameMaker menus, rather than the FM 9 tools.
Select all the files in the book window. With the book window active, open the View menu and look for Conditional Text. Your settings here apply to all selected files in the book window, so it's possible to set conditions on all or some files files. Ctrl+Click to select non-contiguous files; Shift+Click to select a range of contiguous files.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Is there a quick way to show/hide conditional text to create a book?

I have a set of files that represent chapters. These will be used in two books. Is there a way to show/hide conditional text from the book file rather than going into each chapter and setting show/hide for the book I want to create?

WIth the book file open and selected, select all the files in the book (Ctrl+A), and apply your condition settings. Update the book.

CS3 plugins needed: worldready and conditional text plugins to open files

I have CS3 Creative Suite and I created a digital portfolio that will not open on my new computer because it says a worldready plugin and conditional text plugins are needed. I called the adobe hotline but they said since it's CS3 they do not have support for my issue and that I would need to update to CS5. If someone could please direct me in the right direction it would be extremely appreciated.

You are trying to open a file saved in a more recent version of InDesign. If it was only those two plugins listed it's a CS4 file. The file will need to be opened in the correct version and exported back to .inx through CS4 (CS5 files need to be exported to .idml before they can be opened in CS4). Unsupported features will be lost and text may reflow du to differnces inthe text engins from version to version.

How to hide the fixed text when it is not needed?

Hi All,
I am using a fixed texts in a lot of reports to detail queries.
How to cancel or hide these fixed texts when there is no data returned for some detail query in the report?
Note: I am using Reports 6i.

Select that text and press F11 to call PL/SQL Editor and use the code as below.
IF your_condition_when_no_data_returned THEN
RETURN FALSE;
ELSE
RETURN TRUE;
END IF;-Ammad

Need help - Hide row of a recursive grouping if textbox value is empty

Hard to explain, but I will do my best.
I have a simple report that has a resource (accounting) recursive grouping. The group and the recursion is working correctly. The only dollar values I have to display are at the lowest level of the hierarchy so instead of having a simple SUM("POSTED_TOTAL_AMT")
field to show the rollup totals I did the following =Sum(Fields!POSTED_TOTAL_AMT.Value, "TREE_NODE", Recursive).
TREE NODE
POSTED TOTAL AMT
ALL_RESOURCES
24163945.66
BANK
BENALL
7027062.56
BENWL
3490587.96
BENFT
279969.6
BENLD
3210618.36
COMAB
1357934.08
INCWL
2178540.52
CASH_FLOW
CHRTY
COGS-ENS
Everything I have read shows you how to hide a row based on a dataset field but I need to hide the row based on the textbox expression. For reference here is the expression for the values showing on the report: =Sum(Fields!POSTED_TOTAL_AMT.Value, "TREE_NODE",
Recursive)
I added this into the row visibility: =iif(IsNothing(Fields!POSTED_TOTAL_AMT2.Value),True,False)
But when I run the report I get the following error:
System.Web.Services.Protocols.SoapException: The Hidden expression for the grouping ‘TREE_NODE’ refers to the field ‘POSTED_TOTAL_AMT2’. Report item expressions can only refer to fields within the current dataset scope or, if inside an aggregate, the
specified dataset scope. Letters in the names of fields must use the correct case.

Hi BlackHills_SD,
According to your description, when you use the iif expression to set visibility of the row, you got the error message.
When we write expressions, we will find that the term scope is used in multiple contexts. Scope can specify the data to use for evaluating an expression, the set of text boxes on a rendered page, the set of report items that can be shown or hidden based
on a toggle. It seems that POSTED_TOTAL_AMT2 is not in the same dataset as TREE_NODE. We can refer to the following steps to troubleshoot the problem:
Right-click the report and click Insert to add a text box.
Right-click inside of the text box, then click Expression.
Click Datasets, click First(POSTED_TOTAL_AMT2), scope of POSTED_TOTAL_AMT2 will be listed.
For more information about Understanding Expression Scope, please refer to the following document:
https://technet.microsoft.com/en-us/library/dd255256%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Very slow PDF generation when conditional text is hidden in FM 9.0

I am working on 96-page chapter of a larger book. A 7-page section of the chapter needs to be hidden until the next release, so I hid it with conditional text. After doing this, the "Save as PDF" printing process goes from taking 6-7 seconds to taking several minutes. If I unhide the conditional text in the same session, printing is very quick again.
I have no problem generating very PDF files with the PDF printer in other applications (Word, PowerPoint). The issue is specific to FrameMaker and the use of conditional text. What might be causing this?
I am using FrameMaker 9.0p255 and Distiller 9.0.
- Chris

Hi Jeff,
These were good suggestions to try. Saving the document first has no effect on PDF generation.
However, I did find that printing to the Adobe PDF printer remains fast when the conditional text is hidden. That's quite an interesting finding! I did also notice that these two methods of PDF generation aren't identical:
"Save as PDF" opens an Adobe Distiller window, while printing to the Adobe PDF printer opens a different "Creating Adobe PDF" progress box (looks like it's from the printer driver itself).
"Save as PDF" generates a 1188k PDF file, while printing to the Adobe PDF printer generates a 1049k PDF file.
"Save as PDF" defaults to placing the PDF in FrameMaker's working directory, while printing to the Adobe PDF printer defaults to saving to the last place to saved a printed PDF file (awkward when working with multiple directories, as I often do).
When I do a "Save as PDF", FrameMaker does still spool to the PDF printer. It is this spooling that takes a long time. Once spooling is complete, then the Distiller window opens and the PDF is created very quickly.
I would still like to get "Save as PDF" working since it knows where to place the PDF file. No solution to the runtime yet, but at least there is progress...

Can I export just the "show" conditional text to a mif?

When I export a document with conditional text to a pdf, just the conditional text that is set to "show" (and the unconditional text) appears in the pdf. That's good, but I want the same thing when exporting a mif. There are two reasons for this:
(1) We have an in-house tool that parses a mif and extracts data from certain tables to populate a database. The tool doesn't parse pdfs. And the tool won't always handle conditional text correctly, particularly conditional text table rows. The tool would work fine if the conditional text were already "resolved" during the export to mif.
(2) I'd like to use the Boolean logic for conditional text that is available in FM9, but I need to furnish files to other groups in the company that use FM7. Their FM7 wouldn't display conditional text properly if it depended on anything other than OR logic. But they would be happy to accept mif files that didn't have any conditional text because it had been "resolved" when I generated a mif7 file for them.
I've tried various ways to convert a pdf into a mif file, but no process seems to preserve the formatting and the editable text. I'd be willing to accomplish this in some round-about fashion involving Framemaker, Acrobat Pro and/or some other tool.
But the happiest outcome for me would be to discover that FM9 already has the ability to export just the "show" conditional text and the unconditional text to a mif.
Or can this be done by making a copy of the document and then somehow automating the deletion of the "hide" conditional text and the conversion of the "show" conditional text to unconditional?

Or can this be done by making a copy of the document and then somehow automating the deletion of the "hide" conditional text and the conversion of the "show" conditional text to unconditional?
Writing a custom script to filter the MIF to parse out the conditions is non-trivial. You can try a Google search for an existing filter or script that does the job. However, if there is no such thing, then you're on the right track, getting FM to do the hard part - filtering the conditionalized content correctly. For example:
* In a copy of the original file, delete the condition(s) you want to hide; during the deletion, you have the option to delete the corresponding text. Then save as MIF to a descriptive name, or save as .fm to a new name, then open and save that file as MIF. Close the source file without saving.
* Reopen the source file and do the same process from this fresh instance, deleting the condition(s) you want to show. Save as above.
* Within FM itself, however, there's no way to automate this process. With one of the free FM utilities - dobatch from cudspan, or dzbatcher from datazone - you can script opening and saving an FM file as MIF. Search Google for dobatch, cudspan, dzbatcher, or datazone.
* To automate setting the conditions, a keystroke-macro recorder might serve, otherwise you'd need the commercial FrameScript product, and a customized script if there's no existing script for this purpose. For FrameScript info, check with Rick Quattro at frameexpert.com.
* If you're using Structured FrameMaker and have the expertise available to customize an EDD, you could take advantage of the "filter by attribute" feature, but it's not trivial to adopt Structured FM just for this narrowly-focused need.
HTH
Regards,
Peter Gold
KnowHow ProServices

RH and FM conditional text

I am evaluating alternatives to our old WWP setup. With that
setup, we were able to process our conditional FM source
automatically into various outputs. The WWP project file interacted
with FM to control the conditional settings for different jobs.
With RH 7 for HTML, acccoring to the online help, we must set
the conditions manually in Frame before we run RH. Is this correct?

Thanks. At this point, I'm trying to figure out what to do
first.
The Help says to apply FrameMaker Conditional Text Build
Expressions before adding any FrameMaker files. Since I haven't
added any FM files, RH can't have any information about the
conditional tags we've defined in FM. Does this mean I have to
define some conditional expressions in RoboHelp to match the ones
we're using in FM, and then use these RH expressions when importing
the FM files?
The RH Help says that when I select the "Apply FrameMaker
Conditional Text Build Expression" option, "only the filtered
content is imported into RoboHelp, based on the conditional text
build expression." This suggests that I can use one expression to
load one "flavour" of my FM document into the RH project. It
implies that if I want a separate flavour for a separate output, I
will have to change the expression and add the FM files again. Is
that correct?
Does it make a difference how the conditions have been set in
the FM files when I add the files to RH?
What is the FrameMaker Conditional Text Build Expression? Do
I need to create a build expression named "FrameMaker" for use when
adding FrameMaker files?
Sorry for all the questions, but I'm having a hard time
following the Help.

Conditional text adding paragrpah returns?

I'm trying to show/hide instructor pages of text for a student copy of a book but, when I hide the instructor information (styled as conditional text) paragraph returns, with conditional markers, are being added.
What may be causing these, and how can I avoid them? This doesn't happen in the source files I received from my client, but I can't see what I'm doing differently in my template that would cause this.
Thanks!!!

Is there a fix for this? I have a situation when I have a bulleted list and need to conditionally tag the first 5 elements as A and the second 5 as B. When I hide A, the B list shows, but there's an empty bullet before them with the A marker in it. Tried conditionally tagging the entire element (including the paragraph symbol), but that doesn't help.
Thanks,
Barry

Conditional text and text inserts in FM 10

A perfect scenario, I thought, for conditional text: user guides for versions A and B of the same product, where most of the content is the same for both and some specific to one or the other. Some of the variants – such as "Connecting the power supply" – are at chapter level, others at paragraph level … so I've set prepared two .book files, and two chapter files which contain a single sentence plus the condition settings: show A, hide B or show B, hide A, respectively.
Extra finesse, just sprung on me: one chapters, which exists in an A and a B version, uses a text insert for some common paragraphs and one of these paragraphs now needs to be hidden util development is completed.
Long context, then. Short problems:
selecting all the files in a .book and using File > Import formats (with only Conditional text settings selected) doesn't seem to be working
the conditional text in the insert refuses to go away, even with the relevant condition defined, and set to Hide, both in the insert and in the chapter that calls it
Final question: do I need to brush up on conditions, or is FM 10 not as reliable as it might be here?
Windows 7.0, one single FM installation of 10.0.2.419

Niels,
When you imported the text insert, what did you set for its properties behaviour, i.e. to stay as per the source or to use the properties in the currrent document?
Are you using "Show as per Condition" or "Show as per Expression" to control the appearance of the conditional text?
In the insert source document, does the relevant paragraph hide when the condition is applied?
Is the condition name spelled identically (capitalization and spaces) in the inset and document?

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).
I have read multiple posts on how to do this and I am still confused.
Apple ID/ICoud:
We want to be able to monitor what they do, but do not want their devices linked to our emails/contacts/etc... Each kid has their own email account. So, from what I have read the best way to do this is to use our family Apple ID, but set them up with a separate iCloud account? Is this correct?
Reset/Restore/DFU:
To start fresh we have done multiple factory resets. I did one that someone said was a DFU and a plan ol' factory reset, etc... Not sure the difference. However, when I do that I get the "hello" screen and am able to start setting the phone up anew. However, when I go to set the phone up as an iPod I end with the same result.
So, here is what I am doing (tell me what I am doing wrong):
Hello Screen
Asks me to select language and selecting: English
Select Your Country or Region: United States
Choose a Wi-Fi Network: select my home wi-fi network
Enter password: entered my home wi-fi network password
Activiate iPhone - wants me to enter Apple ID and Passwordsays that this iphone is currently linked to an Apple ID (k*******@gmail.com). Sign in with the Apple ID that was used to set up this iPhone.
Location Services - I have enabled location services
Set Up iPhone
Set Up as New iPhone
Apple ID
Options are to sign in with your Apple ID or Create a Free Apple ID
Or I could "skip this step"
I signed in with my Apple ID
Terms and Conditions - Agree
iCloud - I can select either to use iCloud or Don't Use iCloud - I selected use iCloud
Find My iPhone - I can select either to use find my iPhone or to not - I selected use find my iphone
Once I do this it says iMessage and FaceTime and shows the following:
my email
my other child's cell phone number
and my husband's work phone number
This is where things do not make sense. I only want the phone set up with the current child's email address. Where did I go wrong?

There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
Now, to share apps, music and books you need to have the same Apple ID:
iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
For the other service, your wife should have her own Apple ID.
All she needs is a valid e-mail address, apply Apple ID below:
https://appleid.apple.com
Here's a limk with useful tips: Note: It's also valid in IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Conditional Text in Table - Problems with row height adjustment

Hey there,
I’m german but I try to express my problem in english as good as I can. Not always easy with the different menu names. Hope you get what I want to say! :-)
As you can see in my attached screenshot, I placed text in a table.
Text height is set to: minimum 1,5 … so it adjusts to the amount of text.
This is what I want - it should adjust the height to the marked/aktivated conditional text.
It always adjusts the hight when I blind out the first line oder lines in between (e.g. line 2+3 of 4).
But if I want to blind out the last line(s), there is a ¶ at the end and a extra blank line with the #.
I know, the # stands for the following hidden Text, but why does it work with the red/green text.
There is also text hidden (green), but the mark # is right after the last word - not in a new line.
Has anyone a solution for this?
Thanks in advance!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

Adding Conditional-Text conditions in bulk.

We are importing text from excel using XML via XSLT.
We would like to mark certain prices (excel columns or Indesign tags) as conditional text.
We are having a great deal of difficulty in applying conditional text using find-and-replace within Indesign, because of the variation in formatting of prices.
Below two products, where product B includes a thousands comma separater, a Tax Staus marker in the UK and a Truck Shipping marker in the USA all of which need to be included within the conditional text.
Product
UK (X1X)
Europe (X2X)
USA (X3X)
A
£1.99
3.50E
£3.59
B
£1,199.00 XV
3.500.00E
$3,590.00 T
Is it possible to apply conditions to tags?
Is it possible to apply conditions using XML or XSLT?

This problem was solved by a response to a more focussed question about GREP searching.
applying the conditions is straightforward once the correct strings have been GREP'd

Need to hide "Evaluating Condition" text in dashboard in OBIEE 11.1.1.6.7

Similar Messages

Maybe you are looking for