Need to rescue Garage Band Files with Data Rescue II - what kind of files?

Hi all -
After a particularly gruesome computer crash, I am trying to reconstruct my lost files using Data Rescue II..... This program goes into the damaged hard drive and downloads all intact files it can find, but it is NOT able to label everything correctly. All it can do is divide things into folders - Audio files, document files, images, mail, misc., and movies. And within these folders are other folders - for instance, in the "Audio" rescued folder, there are hundreds of AIFF files, AIFF1 files, AIFF2, MP3, WAV, m4a, and m4p files.
My question is: can someone please tell me what the heck a Garage Band project file is? That would save me a lot of time in digging through all this material trying to find one....
(Don't get me wrong... I'm grateful to have stuff to dig through! I just hope my Garage Band files are intact and recoverable.)
Has anyone had success saving Garage Band files with Data Rescue II?
Thanks in advance.

Aaaagh!
I spoke too soon. Yes,I did indeed find the file that contained all the files I needed to retrieve (using Disk Rescue II). When my 6-hour download of the 78 GB folder finished, I check the files again, and they weren't located in the orphaned section, but in the Hard Drive section under the normal directory, in a folder called .Trashes - within that there was another folder called "501", which contained all the Garageband files I needed to retrieve. However, when I tried to open the downloaded "rescued" files, they were inside a folder called "Macintosh HD", which could not be opened, and I got a message that said "Could not be opened because you do not have sufficient access privileges." Not only that, but even after 6 hours of (apparently) downloading the 78 GB folder, my hard drive, which had close to 83 GB of free space, said STILL had almost that same amount.
So did it download anything or not? What was it doing all those 6 hours? I have a file that I can't open, but apparently it's going to be empty anyway.
Here's the full story, for anyone with the patience to listen and offer advice. It looks like now I'm looking for a way to 1) get the permissions to open the .trashes file so that I can download everything, or 2) figure out a way to get Disk Rescue II to open the files and download them regardless of the permissions.
Full Story -
I am pretty sure that my computer crash was caused by working with the newest version of Garageband 08. Ever since buying it and loading it, my computer has been acting funny whenever I use the Garage Band program - I could only record about one in three attempts since the computer kept freezing as soon as I finished recording a line. I would have to use force restart to get going again.
The day the computer crashed, I was working on a Garage Band project, which kept crashing, and I was also using Finale, Microsoft Word, and iTunes -- all of which are my normal procedure and I'd never had any problems with anything before loading the new Garage Band 08. (See my posts on other discussion topics for more details). After the last freeze, the computer crashed totally and could not be restarted - it would get to the gray screen with the spinning gear and just sit there while the fans ramped up to overload.
I used Disk Warrior to rescue whatever files I could onto an external hard drive, and I started to download all the Garage Band files. However, the "estimated time to completion" said over 6 hours , so I stopped the download after a minute or so and went on to rescue all the other files that were smaller in size and easier to download - I figured I'd set Disk Warrior to download the whole 78 GB set of Garage Band files overnight while I slept. But....when I went back to begin the download again, I noticed that the directory of Garage Band files went only to the letter "C" instead of all the way to "Z" like my original files had done during that earlier attempt to download. I am assuming that somehow, the directory for the files I download before aborting the attempt (A-C) got exchanged with the directories of the original version (A-Z), but the original directory was no where to be found.
I decided to try an archive install in the hopes that I could just restart my computer and get the files out by hand. The archive install went fine, and the computer started up fine and got to the log-in screen, which had changed. I now had two blanks - one for user name and one for password, instead of the choices of names. I tried all my user names and passwords, and asked my wife for her names and passcodes, but nothing worked. The computer had apparently re-set all its permissions and User accounts. I tried using Disk Utility to reset the password in its opening screens, but instead of getting several User options, the only one it allowed me to attempt was "System Administrator (root)", and even that wouldn't let me in to change any passwords.
That's when I downloaded Data Rescue II, which does seem to do a good job of locating lost files. However, since I didn't have permissions to open the computer the last time, I am still apparently facing the same thing when I try to access files copies OFF the computer.
So I'm not out of the woods yet. I can see the files on the Data Rescue screen, but I don't know whether they have permissions tied to them or not, and if they do, whether the system would let me since I don't know what the passwords and user names have defaulted back to.
Any advice? Please?

Similar Messages

  • Recovering Livetype files with Data Rescue II??

    Okay, here's a duzy for you tech gods. Does anyone know if this is possible? I was able to recover a lot of my media for my project...but I lost dozens of Livetype files to the trash.
    Data Rescue II, my recovery software can recover a number of different file types...but makes no mention of Livetype. Anyone know if I can turn the recovered resource forks back into editable livetype files? So I'm wondering more about what exactly makes up a livetype file.
    Here's the process Data Rescue uses:
    "In OS X, when a file is deleted, for example by dragging it to the trash and emptying the trash, the file’s name and folder information is usually erased by the system, and is therefore irretrievably lost. However in most cases, the most important part of the file – its contents – are still present on the disk. Finding the file by its contents alone is in general a difficult task, requiring algorithms to recognize those contents among all the billions of bytes of data on the disk. This task requires algorithms that are tailored to each specific file type. Data Rescue X made a start at this by providing support for about
    ten important file types that can be recovered by content."
    And here is the information I could find on Mac files:
    "In generic technical terms, Data Rescue’s content scan is potentially suitable for any file type that consists of a single fork. For files that have both a data and a resource fork, the forks may be recoverable separately by content scan, but Data Rescue has no means to connect the two pieces back together. Some “files” are in reality a collection of separate files which the Finder treats like a single file. This is called a “bundle”. The individual components of a bundle may be recoverable by content scan, but again Data Rescue has no automated way to associate these components back together into a bundle."

    As I've previously mentioned, I don't know anything about DataResue.
    But with FileSalvage, it's a fairly easy process. You don't need to know file info of any sort. Scroll about halfway down the FileSalvage website until you see this:
    "Adding Custom File Formats
    To recover files that may not already exist in the current list of ‘Supported File Formats’ the user can add them via the dialog drop down, doing so by dragging & dropping 10 or more files of the same format into the ‘Custom Format’ pane to the left side of the drop dialog. Once these 10 or more files of the same format have been dropped into the pane, the Process button will become highlighted and should then be clicked by the user. Upon completion of analysis the new format will be added to the supported formats pane."
    Regards. Robert

  • Append a file with date and name in the output file

    I am running a script which produce an output in excel file, I would like the server name and the date in the output file,  Both the servername and date has declared at the beginning of the script as 
    $server = test1
    $date = Get-Date -uformat %Y-%m-%d
    I am able to append either server or date but not both. Could you please help me out on this.
    I would like the output file as '
    server_report_date.xls

    I got this working by 
    "C:\Aravind\Scripts\$server-"+"Report-" +"$Date"+".xls"
    Thanks!!

  • In garage band, i want to import a 20 minute wav file and cut it into individual songs, and export them to itunes or dropbox or ...

    in garage band, i want to import a 20 minute wav file and cut it into individual songs, and export them to itunes or dropbox or ...
    i've imorted the file to audio for imovie, but can't see how to chop it up, save the pieces as individual units, and export them.

    Create a new GarageBand project using the "Voice" template.
    Drag you wav file into the Track area of the GarageBand window to create an audio track for it.
    Use the playback button to find the gaps between the songs.
    Mark each song in turn with the cycle region. Press the button with the two blue chasing arrows to enable the cycle region. This will create a yellow bar at the top of the track area. Drag the ends of this bar to mark one of your songs.
    Now use the "Share" menu to send your song to iTunes.
    When done, adjust the cycle region to mark the second song.

  • I have one problem with Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

  • Saving a file with data?

    HI, I am wanting to save a file with data, can some one point me in the right direction to a tut or some thing. Thanks.
    OR
    if they could be so kind as to code a simple thing that saves a file (txt) with a word. This would make my day,
    Thansk and all the best Jonathan :o).

    I have sorted what I was wanting to do. there was some code missing from the coding as well as the import function.
    No you don't have to be 'god' but if some one just handed you a russian/english dictionary you would still have a difficult time making a sentance or even a DVD with every thing there is to know speaking gaelic.
    You have to learn more than just the syntax. sorry I'm not the best person in the world for understanding docs etc, but we all have our good points, ask me any thing else on computers and networks I'll give a plain english answer, wood chips and all.
    This is all meant in a good tone, there is the problem with txt that it tend to have a dull sound, so cheer up and smile. I know I am.
    :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o)
    :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o) :o)

  • How to Run Export and Make Dump and Log File with Dates on NT

    Hi Gurus,
    set ORACLE_SID=ORCL
    set ORACLE_HOME=D:\ORACLE\ora92
    for /f "tokens=2,3,4 delims=/ " %%a in ('date /t') do
    set fdate=%%a%%b%%c
    exp userid=userid/password@connectstring
    file=exp%fdate%.dmp log=exp%fdate%.log full=y
    I am using above script for export and make dump file with dates, but when i am excuting this script with Schedule task i am getting error.
    C:\Documents and Settings\krishna>for /f "tokens=2,3,4 delims=/ " %%a in ('date
    /t') do
    %%a was unexpected at this time.
    Help is highly appriciated.
    Thanks & Regards
    praveen

    HOST('EXP80 MRPAY/MRPAYS FILE=D:\BACKUP\MRPAY'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=MRPAY CONSISTENT=Y');
    HOST('EXP80 SECSYS/SECSYS FILE=D:\BACKUP\SECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SECSYS CONSISTENT=Y');
    HOST('EXP80 SICPA/SICPA FILE=D:\BACKUP\SICPA'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPA CONSISTENT=Y');
    HOST('EXP80 SICPAINVSYS/SICPAINVSYS FILE=D:\BACKUP\SICPAINVSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAINVSYS CONSISTENT=Y');
    HOST('EXP80 SICPAGLSYS/SICPAGLSYS FILE=D:\BACKUP\SICPAGLSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAGLSYS CONSISTENT=Y');
    HOST('EXP80 SICPAPURHSYS/SICPAPURHSYS FILE=D:\BACKUP\SICPAPURHSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPAPURHSYS CONSISTENT=Y');
    HOST('EXP80 SICPARECSYS/SICPARECSYS FILE=D:\BACKUP\SICPARECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPARECSYS CONSISTENT=Y');
    HOST('EXP80 SICPASECSYS/SICPASECSYS FILE=D:\BACKUP\SICPASECSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=SICPASECSYS CONSISTENT=Y');
    HOST('EXP80 FASYS/FASYS FILE=D:\BACKUP\FASYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=FASYS CONSISTENT=Y');
    HOST('EXP80 ATTSYS/ATTSYS FILE=D:\BACKUP\ATTSYS'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=ATTSYS CONSISTENT=Y');
    HOST('EXP80 ATTENDANCESYSTEM/ATTENDANCESYSTEM FILE=D:\BACKUP\ATTENDANCESYSTEM'||TO_CHAR(SYSDATE,'DDMMRRHH24MI')||'.DMP OWNER=ATTENDANCESYSTEM CONSISTENT=Y');
    Arshad

  • I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
    Check with your carrier about roaming charges.  They are usually prohibitive.  Best to get a local SIM.

  • How to load a flat file with utf8 format in odi as source file?

    Hi All,
    Anybody knows how we can load a flat file with utf8 format in odi as source file.Please everybody knows to guide me.
    Regards,
    Sahar

    Could you explain which problem are you facing?
    Francesco

  • Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

    Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

    Hi BDAqua,
    Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
    Problem solved, many thanks for a quick response.
    Barry69

  • Trying to convert video files with an extension of IDI_DVD to digital files itunes and imovies can read can someone help me

    Can someone please tell me how I can convert video files with an extension of IDI_DVD to a file itunes and imovie can read? Thanks.

    Thanks for the reply, The files are on a DVD disk. I coverted my family VHS tapes to digital dvds using an HP Media Centre PC five or more years ago cant remember the program but if I get info on the disk ,on the Mac it tells me the extension is IDI_DVD.

  • My father-in-law's photo library has thousand of "stock photos"(such as the guitar from garage band) surrounding his actual photos.  What is the easiest way for me to clean this up for him? Karen

    My father-in-law's photo library has thousand of "stock photos"(such as the guitar from garage band) surrounding his actual photos.  What is the easiest way for me to clean this up for him? Karen

    Can you tell me how to do that and how to do it without erasing his actual photos which are intermingled?
    ThanK You.
    Karen
    PS We are only in town for a few more hours & I'd love to get this done for him. He's in PA & I'll never be able to walk him through this by phone:)

  • What kind of files are compatible with iMovie?

    What kind of files are compatible with iMovie?

    Hello Jonsi41,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Import video from movie files
    http://support.apple.com/kb/ph2153
    files can be in a number of formats, including MPEG-4 and standard (DV) file formats and some .mov file formats.
    Best of luck,
    Mario

  • ".aif - What kind of file is this?" (Logic asks)

    Hi, I'm having problems with Logic right now. When I try to import an audio file into the arrange window, Logic says "Cannot open 'file.aif' - what kind of file is this?" This happens when I try to import all different varieties of files, most of them not AIFs.
    Before I got Logic, GarageBand was also having this problem.
    I got a M-Audio FastTrack Pro recently. Is it possible that this has something to do with it?
    Also, QuickTime is not able to play audio files (and possibly video, though I haven't tried). Who knows if that is related.
    Any help would be great. I'm wanting to be able to import song files into what I'm doing right now, but unfortunately, it's currently impossible.
    Thanks.

    Hi,
    The problem is that you must have installed some new software, which has now changed the assignment of .aiff extensions, so that now, your Mac does not open them with the right software.
    You need to repair permission,s and also re-bind the links between the document types and the applications.
    Cheers

  • Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded

    Distribution mobileprovision and Developer mobileprovision what kind of files can be uploaded
    Hi
    Im trying to opload Distribution mobileprovision and Developer mobileprovision files in the DPS Viewer Builder, but cant see what i need
    I have tre .p12 setificats but none of them are able to be selected when i browse.
    Must be doing something wrong here, just wonder what ... can you hel?
    Helen

    Go through the attached Publishing Companion Guide. You need to create Mobile Provisioning files using Apple iOS provisioning Portal. The guide gives you step by step information on creating these.

Maybe you are looking for