Need to reset pagination...

Hello,<br>
I have a dynamic "group by" report looking like this:<br><br>
<b>[link]</b>   [value<b>1</b>]   [number of records for this value]<br>
   [other type of link]   [details record<b>1</b> for value<b>1</b>]<br>
   [other type of link]   [details record<b>2</b> for value<b>1</b>]<br>
...<br>
   [other type of link]   [details record<b>m</b> for value<b>1</b>]<br>
<b>[link]</b>   [value<b>2</b>]   [number of records for this value]<br>
<b>[link]</b>   [value<b>3</b>]   [number of records for this value]<br>
<b>[link]</b>   [value<b>4</b>]   [number of records for this value]<br>
<b>[link]</b>   [value<b>5</b>]   [number of records for this value]<br>
....<br>
<b>[link]</b>   [value<b>n</b>]   [number of records for this value]<br><br>
where [value<b>1</b>] - [value<b>n</b>] - all available values for the group by field.<br>
Clicking the <b>[link]</b> link displays the same page with all the details records (records type of <br>
"[other type of link]   [record<b>m</b> for value<b>n</b>]") for the corresponding <br>
[value<b>n</b>] value. <br>
<br>
The number of records for every value in group by field might be different.<br><br>
Is there a way to set up the pagination to the <b>first page</b> every time the <b>[link]</b><br>
is clicked? <br>
The way it's done now: it remembers the page you are on and often the <br>
report is displayed blank until you clicked the <b>1</b> (the first page link). <br>
I am using the <b>"Search Engine 1,2,3..."</b> pagination, APEX v. 2.0.0.00.49.<br>
Thank you.<br>
Zhanna<br>

Have you tried using the reset pagination (RP) keyword in the clearcache position in the URL of your link?
Earl

Similar Messages

  • AJAX calling report from one page to another not Reseting Pagination

    I have links on one page that when clicked are calling a report on another page and loading it in a DIV with AJAX. The problem I am having is that the reports on the 2nd page are built dynamicly depending on the link you click. If you are viewing lines 16-30 and go to a report that only has like 5 lines, you get the Need to Reset Pagination error.
    Invalid set of rows requested, the source data of the report has been modified.Reset Pagination>
    In the htmldb_Get line, I thought you could set it to reset pagination when it fires. The AJAX is below. Does the RP need to be somewere else? or am I just missing something...
    function doReport(pC,pM) {
    document.getElementById('report_drop').innerHTML = 'Loading Page...';
    var tableRow = document.getElementById('reports');
    tableRow.style.display = 'block';
         var get = new htmldb_Get(null,$x('pFlowId').value,'RP',2);
            get.add('P2_CODE',pC)
            get.add('P2_MPC',pM);
         gReturn = get.get(null,'<clip>','</clip>');
         get = null;
         $x('report_drop').innerHTML = gReturn;
       init_htmlPPRReport($x('report_drop').getElementsByTagName('DIV')[0].id.replace('report',''));
         return;
    }So from what I understand the line below should be resetting this
         var get = new htmldb_Get(null,$x('pFlowId').value,'RP',2);   Edited by: Matt.Smith on Jul 18, 2011 12:08 PM

    Hi,
    Source setting for that form page item P1_COUNTRY is
    Source Used:"Only when current value in the session state is null"
    Source Type: Static Assignment.Since i build this form along with report.
    Is im missing something.
    Regards,
    Mini

  • Mixing of interactive report and classic report fails the RESET PAGINATION process.

    I have a tab page where i got 3 different reports REPORT_A (classic), REPORT_B(interactive)  and REPORT_C (CLASSIC) in the same alphabetic order. I have a reset pagination page process which will always fire (without any condition) when you visit the page via tab.
    The reset pagination process which exists in the before header stage is firing but not resetting the interactive report. It does affect the subsequent classic report REPORT_C as well. The REPORT_A would reset pagination fine since it exists before the interactive report. Is this a know bug in apex?
    I created a test demo application with exact steps to reproduce the problem. The steps are in the demo website itself.
    http://apex.oracle.com/pls/apex/f?p=56638
    U: testuser
    P: password
    Apex Version: 4.2.4.00.08
    In my real application i would have a dropdownlist in the page based on which I would filter the data. The dropdownlist will have a corresponding after-submit branch which will handle the reset pagination & RIR absolutely fine. But when we visit the website through tab the above problem would crash the page.
    I tried solutions like gReport.search('SEARCH') but that will fix only the interactive report, not the classic REPORT_C. That is just a hack anyway.
    Any ideas.?

    Ramani_vadakadu wrote:
    in classic report pagination need to be make it up max rows in APEX_SCHEMA(APEX_040200) itself. i was fixed this issue long back myself,but right now i don't remember which table! so please check the schema and track it.
    This makes very little sense to me. Please explain this in detail. Are you advocating making changes to APEX metadata by executing DML on tables in the APEX_040200 schema? Doing so will leave your APEX instance in an unsupported an possibly inoperable state.

  • How to Reset Pagination Page called by a button defined in Select Statement

    Its easy to reset the pagination for a page that is called using a 'Button' such as 'Create'.
    But
    I've defined a button in my records list by using the this entry in the select statement:
    (some characters have been removed to allow for its inclusion in this post)
    href="f?p=&APP_ID.:12:&SESSION.::NO::P12_SEARCH_BLDG1,P12_SEARCH_FLOOR:'||BLDG_ID||','||ID||'">'
    || 'img src="#IMAGE_PREFIX#connections.gif" border="0" alt="Icon 4"'
    ||
    "CONNECTIONS",
    It works great, Except, I need to reset the pagination for the page, (P12_),
    Because I have similar buttons defined on other pages that also call page, (P12_).
    Can you help me?

    Hi Gary,
    see the f?p URL format at http://download-west.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32471/concept.htm#BEIHCICF chapter "Clearing Session Cache for Two Pages While Resetting Pagination"
    Patrick
    My APEX Blog: http://inside-apex.blogspot.com
    The ApexLib Framework: http://apexlib.sourceforge.net
    The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

  • Pagination and Reset Pagination

    I do not understand what pagination means
    and what "reset pagination" does.
    I think I need an example where I can observe
    the difference between using or omitting
    a pagination reset.
    I created a page with a report and a search tool.
    Apex created automatically a Reset Pagination Process.
    However, I was not able to observe the behavior
    of this process.
    The following explanation of the manual did not help me either:
    "In Report regions, resets pagination back to the first result set.
    The Application Express engine keeps track of where the user is
    within a given result set. This process category returns the user
    to the beginning result set. In other words, this category resets
    the counters associated with the report region to return the first
    part of the result set the next time the result set displays."
    Any better explanation/example?
    Thank you very much,
    Marios

    Pagination gives you "pages" of your result set.
    For example if you have a report that queries from the EMP table, and there are 100 rows in the emp table. If your report is set to display 20 records, then you have 5 "pages" of your report. The pagination allows the user to move from page to page of the result set, ie. rows 1-20, then rows 21-40 and so on.
    If the user has moved to say the 3rd "page" of the result set (rows 31-40) and you they somehow navigate back to this report but the parameters change and the query only returns 25 rows, if the pagination is not reset, then the report will attempt to look at the 3rd page of your result set ,which now does not exist. So this will cause an error.
    So when you navigate to a report, if there is a chance that the parameters have changed which will result in a different number of rows being returned by the query, then you should reset the pagination. Or always reset the pagination when the user changes parameters and queries the report again.

  • Reset pagination

    Hi.,
    I am using a link in my bar chart. In the new page there is showing a report. I need to give reset pagination for that page so that whenever I enter there by clicking the link it should display the the first 'n' set of records. I have tried to create an unconditional branching to the new page in which I have given the reset pagination. But in my first page I am using a button which is just submitting and showing the same page. As I have given the branching it is going to the new page when I click the button. Can anyone help me to resolve this.?
    Any help will be appreciated.
    Thanks & Regards
    Charls

    Hi,
    Please see URL syntax
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/concept_url.htm#sthref105
    In URL you can reset pagination
    >
    ClearCache:
    To clear cached items on a single page, specify the numeric page number. To clear cached items on multiple pages, use a comma-separated list of page numbers. Clearing a page's cache also resets any stateful processes on the page. Individual or comma-separated values can also include collection names to be reset or the keyword RP, which resets region pagination on the requested page. The keyword APP clears cache for all pages and all application-level items in the current application and removes sort preferences for the current user. The keyword SESSION achieves the same result as the APP keyword, but clears items associated with all applications that have been used in the current session.
    >
    If you report is interactive, use RIR or CIR instead of RP
    Regards,
    Jari

  • Reset pagination process V2

    This may be my environment having gone a little corrupt but in V2 (upgraded from v1.6) i don't seem to be able to find the option to create a process of type 'Reset Pagination For Page(s) (PageID,PageID,PageID)' which was available in V1.6
    and those 'Reset Pagination for Page(s)' processes that were created in V1.6 seem to now only reset the pagination for the page the process is defined even though the page ids of the pages to be reset are specified
    is this reset option still available in V2 or do i need to reinstall my environment??

    A workaround for what? The previous posts explain the
    workaround for the original problem.Scott: Your earlier post in this thread says
    "Farhan - We took those out by mistake. They will most likely become available again in a patch. Thanks for pointing it out"
    Yes, the version on htmldb.oracle.com does not have this problem, but the generally available HTML DB 2.0, which is what most customers would have on their site, would have this problem.
    Update: htmldb.oracle.com seems to have been changed, my earlier statement "Click on Add Process. Choose PL/SQL. On the next page, in the drop-down list for Process Type, you can see the "Reset Pagination for pages (pageid,pageid,....)" is no longer true. I can no longer do this.
    And there is no workaround for it, as you mentioned earlier.
    Thanks
    Message was edited by:
    Vikas

  • I need to reset my time capsule/airport every day - time capsule has green light but I don't see any wifi signal on my mac and other computers.

    as many of you do, I use time capsule as airport, too...
    It worked fine for 6 months or so after I bought the new time capsule. (I bought it in September 2012.)
    Since the beginning of this year, I had to reset, and power off and plug it in almost every week, then now I need to reset and power off and back on again every day...
    When I first set up the time capsule, I followed the instruction with the manual.
    But, now I am so lost and don't want to reset every day for wifi connection.
    Anyone has problem like me or knows how to solve this issue?
    Please help..
    I have MacBook Pro OS X 10.8.4 & my roommates have PCs. (just in case if it helps...)

    For PC it is important the wireless has names that are compatible.. short.. like 10 characters.. but 2-20 is fine. no spaces.. and pure alphanumeric.
    Use WPA2 personal only.. with pure alphanumeric password .. again 10-20 characters should be fine.
    The latest firmware is a dud. Go back to 7.6.1
    Open the airport utility.. click on the TC and holding the option key click the actual version number..
    Go back to 7.6.1 is simple.. just select it and away it will go.. ignore future requests for upgrade.. you can also tell the utility not to check weekly for updates. You will need 5.6 utility for this I think..
    So do the firmware downgrade.
    Then do a factory reset and follow the name information above.. for TC name as well btw.. wireless name/s and disk share name.. which by default is data and that is fine.
    So some instructions in...
    The Factory Reset.
    Power down the TC.
    Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
    (I fix TC and have several reset levers bent over and jammed or broken off).
    Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
    Keep holding in reset for about 10sec until the front LED flashes rapidly.
    Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    You can also load airport utility into a pc and get access to all the settings.  Untick the box for firmware updates.. it will still bug you occasionally.. regardless of the setting.. just ignore it..
    You might still need to do the occasional reboot of the TC as well.

  • How do I reset my iTunes when I have answered security questions wrong too many times. It says I am locked and I need to reset but not how to do it.

    I am not sure what my kids have done but after several attempts it says I am putting in the wrong answers to my security questions and now has locked it.  It says I need to reset but no clue how to.....can anyone help

    Hello Racheljez,
    I would be concerned too if I was not able to access my Apple ID.  I found some resources that I think will help.
    First, I recommend reviewing the following article for steps in resetting and updating your password to gain access to your account:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    http://support.apple.com/kb/TS2446
    If you are not able to gain access to your account after following the steps in that article, I recommend using the following link for additional assistance in accessing your Apple ID:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Why does the iTunes AppleID system refuse to work properly without the need to reset the password every time I open iTunes for use?

    Alright so here is the issue. When I first started using iTunes I created my AppleID. I locked it in to remember my password and authorize my computer so that I would NEVER HAVE TO ENTER IT AGAIN. So years pass, no problem. Then "ITUNES 11" come on everyone lets upgrade or you can't proper use the iTunes Store. Seriously it wouldn't let me access the store. Go Figure. So I upgrade simple right? No. It really isn't when iTunes 11 rolled out it was riddled with minor bugs that made the experience annoying so I did a rollback and live without the store for awhile.
    About a year passes and I try again this time upgrading iTunes through a COMPLETE fresh install, again I did what had done the first time I logged my AppleID and reauthorized my computer. Hurrah other than getting use to the new UI it ran perfectly. Yes Finally! Right? Again.... No. No more than 2 or 3 software updates later suddenly my password for my AppleID is incorrect I was like "Okay?" and re-entered it thinking the big update cleared my settings.
    Wrong Password please reset password to continue using the iTunes store.
    I was like okay maybe the user agreement change and we all need to reset passwords and re-accept the EUA. So I go through the process to create a new password successfully and reset my AppleID in iTunes with the new password. Come back a few weeks later it happens again this time I enter my new password and what do I get?
    Wrong Password please reset password to continue using the iTunes store.
    So I first do a repair install to my iTunes than reset my password this time NOT setting it to remember password. Great everything works fine again password even matched my Home CompID so that I could NEVER lose it well come a few days later I try to use the store and what happens?
    Wrong Password please reset password to continue using the iTunes store.
    to try to make my Long story a little shorter....
    This has been going on for the better part of 3 years I have almost completely dropped iTunes which has the better store library for Goggle Play Music who's store library isn't even a third the size iTunes has because their system works and my log-in is my e-mail. I repeatedly completely uninstalled iTunes and wiped it from my registry in hope a clean install would fix the problem but it never does.
    My OS is Vista Home Premium Edition 32-bit and no picking on my OS I been working to get a new computer but that isn't happening anytime soon so I work with what I got.

    Even removing the .xml files doesn't make a difference. Also, I now installed another update of iTunes, but still having the same problem, and this time there are no .xml files or preference files whatsoever in the Application Data and Local Settings\Application Data iTunes folders. It seems like for some reason iTunes is unable to create these. What should I do?

  • TS1543 my mac wont stop at single user it continues to root, how can i get to single user to enter info needed to reset password

    I my mac wont recognise my password, i have tried to reset password using single user but my mac wont stop at single user it just continues to root, how do i get it to stop at single user so i can add info needed to reset password?

    Are your sure that wasn't a Verbose boot (Cmd-V) you were trying? That would go on to a regular boot.
    Try a PRAM Reset, then try the single user, Cmd-S, at the startup chime. For the PRAM Reset, hold down Option - Cmd - P - R all together until it chimes a total of three times, then let go to finish booting.

  • I changed my Apple ID but my iTunes hasn't updated so I can't access it...do I need to reset all devices to factory settings? or how else do I get the iTunes to link to Apple ID?

    I updated my Apple ID primary email address without having switched off 'Find my....' on all devices. A 2 hour very helpful call with Apple Support solved ny Apple ID and ICloud. Later, I tried to update apps but my iTunes account is still on the old ID and I can't access that email/password anymore. I can't get a support appointment for 48 hours but need to update travel apps soon!
    Do I need to reset to factory settings on all devices (5!) and start again...or how else can i get iTunes to link to my Apple ID now?
    Any help appreciated!

    Thanks, David. But that was the first thing I tried. For some reason, when I try to change my Apple ID back to my old email address, I get the message that that Apple ID is already in use and so I cannot use it! I have tried requesting a password reset using my old Apple ID email, but I've waited and waited and nothing has come to my old email address. This is sooooooo frustrating!

  • I need to reset Apple ID

    Good day. I have this problem. I need to reset Apple ID. I have the receipt and box from this device this confirms that the unit belongs to me. It was established by the seller at the store he not asked me my name and my mail. And I think that they put their own or invented. When I took the phone after setting it worked. Phone was only used for calls and SMS and some Internet. When I needed to install the application and he asked for the code. I did not know him. I went to the store where it was set up and found out that it was closed forever. I decided to reset it to factory settings and create a new APPLE ID but it is blocked. After reading on the Internet that will only support from APPLE. On the apple website in the support section of the created application No. 749644595.
    February 16, 2015 called the Apple support Russia.
    1)15 minutes waited specialist
    2) After 5 minutes of conversation, the expert Perevi me to another
    3)waited 30 minutes after that I was turned off
    4)I called back and I was still waiting for 15 minutes
    5) I replied and said that can't help me and hung up
    6) I called again, waited 10 minutes
    7)I was transferred to another specialist whom I waited 30 minutes and I got disconnected.
    8) I called and the operator by the name of Vadim almost all my questions answered what apple id and did not answer the main question.
    What should I do now?

    No I bought it from his hands. But bought it in a full set with box and receipt.

  • I deleted my old email address and now I can't acess icloud because I can't remember my password to the icloud account.  It is not allowing me to log in obviously and now my old email is showing under the settings now do i need to reset the iphone?

    I deleted my old email account and when i went to change everything on my iphone it still shows the old email even though i created a new apple id.  I also can't remember the password and now can't access icloud.  Do i need to reset the phone?

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Maybe you are looking for