Need to split messages after mapping in the BPM.

Hi,
I have a req. to split MT to send to target as multicast...
I need to do it after mapping...
How to create interface determination and receiver determination.
HOw to create reciver agreement ...?
regards
Akshay.

Hi
Receiver Determination (Only one)
Enter the Sender Service, Interface and Namespace.
Now add your first receiver system as the service in "Configured Receivers".
Click on the '+' in "Configured Receivers".
Add next receiver system.
Repeat until all receivers are created.
Interface Determination (Only one)
Enter the Sender Service, Interface and Namespace.
Enter '*' for Receiver Service.
Select your inbound interface and your interface mapping.
Receiver Agreement (One for each receiver)
All receivers will need to have seperate communication channels.
Create a receiver agreement for each receiver and select the communication channel for that system.
Regards,
Yaghya

Similar Messages

  • Split message - Multi mapping w/o BPM

    Did you check this thread same thing discusing here
    Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?
    Rajesh

    Hi Sarvesh.
      I executed a refresh full, but the problem persists. I really think something is wrong in my scenario.
      At Design I created 1 Message Mapping (MM_File) with 1 source Message Type (MT_FROM) split to target 3 Message Types (MT_TO1, MT_TO2, MT_TO3).
      I created 1 Interface Mapping (IM_My_Main_File) with 1 source interface (MI_File_Out), 1 Message Mapping (MM_File) and 3 target interfaces (MI_File1_IN, MI_File2_IN, MI_File3_IN).
      At Configuration I created these objects:
    Interface Determination:
    Sender Service: BS_FROM
    Sender Interface: MI_File_Out
    Receiver Service: BS_TO
    Type of Interface Determination -> Enhanced
    Quality of Service: Maintain Order At Runtime is marked
    Interfaca Mapping: IM_My_Main_File
    Inbound Interfaces:
    MI_File1_IN
    MI_File2_IN
    MI_File3_IN
    Receiver Determination:
    Sender Service: BS_FROM
    Sender Interface: MI_File_Out
    Receiver Service: *
    Type of Receiver Determination -> Standard
    Configured Receivers -> Service BS_TO
    Configurarion Overview for Receiver Determination
    BS_TO
    MI_File1_IN IM_My_Main_File CC_File1_IN
    MI_File2_IN IM_My_Main_File CC_File2_IN
    MI_File3_IN IM_My_Main_File CC_File3_IN
    Thanks!

  • I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to ex

    I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to extract Adobe Photoshop Elements 13.  Please download all parts.:  I've also gotten an Exit Code: 7 when trying to install.  I've turned my McAfee virus system off while trying to install. 

    Hi,
    Have you tried downloading Photoshop Elements 13 from here?
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    There is only one file to download - which one depends on your system (32-bit or 64-bit).
    These are the trial versions but will convert to the full version when you supply your serial number.
    Brian

  • How to create Rules with Flex Field mapping in the bpm worklist

    I Have created a flex field label and was able to map to the flex field attributes .
    But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
    Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
    Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
    Any pointers or suggestion is highly appreciated .

    Hi,
    SE38 -> Enter program
    Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
    Now the selection screen will display with a button "Variant Attributes" at the top.
    Click on that button.
    In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
    In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
    Now whenever you run the prgrm with this variant, date will be displayed by default.
    Regards,
    Subramanian

  • Inbox shows 1 unread message after opening all the messages.why are new inbox messages not highlighted

    I cannot find the unread message despite having opened all my inbox messages and wonder why the new messages are no longer in bold text.

    Right click the folder, select properties and then the repair button. A new index might clear it.
    If not try
    View menu > folders > unread see if Thunderbird can find it since it says it is there after an index rebuild.

  • How do I retrieve my recent calls and recent text messages after I restored the settings

    How do I retrieve my recent call log and recent text messages after I had to restore the settings?

    If they were in your most recent back up and you restore your phone to that back up, you'll get them back. If they're not in the back up, there's no way to get them back.

  • Every time I click the Firefox icon a panel says it is already in use and to clear it I need to re-boot, after re-booting the same message appears each time

    I cannot get into Mozilla as the panel appears each time to say it is running

    Must be the "hang at exit" problem. <br /><br />
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #Why Firefox may hang:
    #*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How to XI error message will mapped to the SOAP faul message-SOAP(Axis)

    Hi,
      Receiver end I am using SOAP (Axis) adapter and I am getting the system error and I am not getting the payload in SXMB_MONI.
    What ever the error message how do MAP as a SOAP Fault message in SXMB_MONI.
    I found the Solution from OSS note 1039369 but did not explain where to set what parameter and what modules...
    SOAP Fault code
    If parameter Category is XIAdaptger, Area SOAP, Code FAULT
    In this case, parameters P1 and P2 may be set to the fault namespace and fault name. If these parameters are set, the SOAP fault code is set to namespace P1 and name P2. Otherwise, it is set as in other cases.
    For all other cases
    In this case, the SOAP fault code is set to namespace "http://sap.com/xi/XI/Message/30" and name category.area.code, where category, area, code represent the XI error category, area, and code values, respectively.
    SOAP detail
    If parameter ApplicationFault is set
    The SOAP detail child is set to the XI application payload. If, however, the payload extraction mode is set to Envelope, the application payload is taken as the SOAP envelope and the SOAP detail content is set to its body content. Similarly, if the extraction mode is set to Body, the application payload is taken as the SOAP body and the SOAP detail content is set to its content.
    Otherwise
    No SOAP detail content is set in this case.
    Examples
      XI error element
    <sap:Error ...>
      <sap:Category>XIAdapterFramework</sap:Category>
      <sap:Code area="MESSAGE">GENERAL</sap:Code>
      <sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
    </sap:Error>
    SOAP fault element
    <soapenv:Fault>
      <faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
      <faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
      <detail/>
    </soapenv:Fault>
    Help appriciated
    Regards,
    Venu.
    Edited by: Venugopalarao Immadisetty on Sep 24, 2009 3:39 PM

    Using Receiver SOAP Axis adapter and I am getting the below exception
    XI error element
    <sap:Error ...>
    <sap:Category>XIAdapterFramework</sap:Category>
    <sap:Code area="MESSAGE">GENERAL</sap:Code>
    <sap:AdditionalText>Failed to determine a receiver agreement for the given message.</sap:AdditionalText>
    </sap:Error>
    and above exception how do I convert as a SOAP Fault message..
    SOAP fault element
    <soapenv:Fault>
    <faultcode xmlns:ns1="http://sap.com/xi/XI/Message/30">ns1:XIAdapterFramework.MESSAGE.GENERAL</faultcode>
    <faultstring>Failed to determine a receiver agreement for the given message.</faultstring>
    <detail/>
    </soapenv:Fault>
    Any idea what modules need to add in Receiver SOAP Axis adapter.

  • Need to recover messages after rebuild

    I was getting the downloaded message error in my inbox, so I hit the rebuild button and all my messages disappeared. I saw in your a few apple discussion forums that there was a way to recover them. I have moved my inbox to my desktop and the package content sizes are:
    content_index - 1 MB
    mbox - 1.13GB
    tableofcontents - 4kb
    Obviously there is still something in there. How can I get these inbox messages back? Please help.

    Fabrizio,
    You are likely a candidate for the mailbox splitter script that I can send you, by email (and may still have a link, but not sure). First read the User Tip at:
    http://discussions.apple.com/thread.jspa?threadID=121837
    and the link within, which is repeated, below:
    http://docs.info.apple.com/article.html?artnum=25812
    In addition to the script, there would be a way to import the mailbox into Mail 2.0.5 and split, but this would require some special knowledge to then export the two or more replacement mailboxes back into Mail 1.3.11 format, but I know how to do this.
    If you want the script you will need to email me, at my address found in the bio line of my Profile (click on my name to access). To be able to send, you need to set this Sent Messages.mbox aside, and let Mail create a new Sent mailbox. This old one will have to be split into several new mailboxes, anyway, and this can be done while it is on the Desktop.
    Ernie

  • Has anyone had a problem losing e-mail messages after viewing on the iphone

    Recently, I have lost a small handful of Yahoo messages. Seriously, they just vanished into thin air. The message would be there in my list of messages, but when I would open it on the iPhone, it would be a completely different message.
    Initially I thought I had accidentally deleted them, but after searching once on an actual computer, I discovered that they were truly gone. I finally contacted Yahoo about the problem, and they said that it is a known issue - the issue being a user has a message, views the inbox on ios5, tries to view the message, but then the message disappears completely..."completely" being verified by use when logged in on a non-ios5 device such as computer.
    So now I'm just careful. Fine.
    Now my boss is telling me that he has had some of his messages disappear from our company domain through MSExchange. WTH?? We're having our Exchange host look into the issue, but I thought I'd do some investigating of my own in the meantime.
    Has anyone else experienced this?
    For the record, both of the phones in question are 4s iPhones running ios5 (naturally) on Verizon. Mine is a 64GB, acquired in November 2010, and my boss' phone is a 32GB, acquired in December 2010.
    Any insight is greatly appreciated..

    Clean iPhone charging port with clean dry toothbrush.

  • I keep getting a session timeout message after agreeing to the new iTunes store terms.  Have reset the keychain and restarted iTunes.  No joy.

    The message is:  "Your session has timed out.  Please try this operation again from the beginning."  It appears immediately after I click on the I agree button.  This is the first time accessing the store since I upgraded to Snow Leopard.  The reply from the Apple Help person via email pointed to a web page that suggested there might be a problem with keychains so I used the Keychain Access app to verify and repair it/them/whatever.  I have never used keychains and really don't see any use for it/them.  I guess I can get along without new iPad apps, or maybe I'll have to...

    Having the same problem on my iMac.  I've tried everything to do with connection problems in the Help article re: the iTunes store with no results.  Also contacted Support, which referred me to the Help article and to the Support Communities i.e. here; no dice.  I get the idea that something's mixed up here; they told me it was probably my internet connection rather than an iTunes issue, but according to my diagnostics the network is working perfectly fine.  It has to be something on the far end - especially since there would appear to be no less than four people with the issue.

  • Get error message after trying all the fixes

    My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
    An unexpected error has occurred. Check OK to close program, and then try the following:
    --restart the program
    --restart the PC and then try again
    --reinstall the Photo and Imaging software and try again
    I tried all these - and downloaded new software after uninstall of old.
    Still getting error message -- any suggestions please?
    Thanks in advance.

    Hello golden1, and thanks for the reponse!
    I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred  which is found on http://hpanswers.blogspot.ca.
    Step 1:
    -In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
    Step 2:
    - In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
    - Go to Shell Hardware Detection, right click, and select properties.
    - Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
    - Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
    Step 3:
    If you if you are using downloaded software instead of the printer CD:
    -Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
    -Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
    -Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    If you are using the printer software disc, follow these steps instead of downloaded software:
    - Go to the Start menu, and go to Computer.
    - Double-click on the icon for the HP printer CD.
    - Open folder "Util".
    - Open folder "CCC".
    - Please run the L3uninstall.bat.
    - When the uninstall has completed, restart the computer.
    - Run Disk cleanup in "System Tools"
    - Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer
    - Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
    - Rename the twain_32 folder "twain_old".
    - Restart computer.
    - Download printer software and reinstall.
    Step  4:
    - Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
    Step 5:
    - Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred.  You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/produc​ts/features/system-restore
    If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I am having trouble uploading pics to a forum profile.I keep getting 'Error #2038' message after it says the pic was uploaded.

    I am a member on a web group. I have repeatedly tried to upload photos to my profile on the site, but when it says the photo was uploaded successfully, I get an error message, Error #2038. It's not clear whether the error is on the web page or on my end. This is not the first time this sort of thing has happened. My room mate is a member of the same group, and has no difficulties on his computer, so it may be on my end.

    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
    *Trash the current Firefox application to do a clean (re-)install
    *Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Iphone warning message after playing on the wrong dock 6 months ago

    since using my iphone 3g on a bose dock by mistake - it played music ok-  now whenever the phone is switched on I get a warning that the device is not suitable .
    have updated the operating system, reset, multiple syncs, but it will not stop the message -
    how can I rid myself of this troublesome warning?

    No damage either way. The 'airplane mode' warning is simply a warning about interference form the cellular radio; it can also occur if the dock connection is not 'solid' (check for debris in the dock). As for the car charger, the iPhone 3G (and latest generations of iPod Touches and Nanos) cannot draw power from the Firewire pins of the dock connector. Many car chargers use those pins for power since they can carry the full 12 V of the car battery (USB power pins require a step-down to 5 V). But, it will still play music, and won't hurt your iPhone (just won't charge it unless you get a different dock or a dongle to convert the FW power).

  • Why am i getting error messages after I installed the latest update?  I am running Windows 7 and now getting error 7 .  It tells me to reinstall I tunes which didn't help

    Help please

    Hello mamdonde,
    The following article provides steps that can help resolve this error.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

Maybe you are looking for