Need to trigger InputProcessor after user login
Hello All,
We have a workflow where we need to display some data in a portlet (list of catalogs
which user has access to).
This data should be visible when the portlet gets displayed.
We have an InputProcessor which retrieves this data.
The question is which event should fire the InputProcessor.
Could we link the PostLoginProcessor to this InputProcessor?
So that when a user successfully logs in, this workflow would get executed and the
portlet would show the list.
Is this the right approach or there is some other way?
Would greatly appreciate any help or suggestions.
Thnx.
Mukul
Dave,
The problem I was having was how to trigger the InputProcessor after user logs in?
Is there a processor node I can use or some postlogin event?
Mukul
"David Anderson" <[email protected]> wrote:
I'm assuming that you have supplied a particular .JSP to be dispayed when
you created your portlet definition. Instead of doing this, create a
webflow that is executed when the portlet is displayed. In this webflow,
make the input processor you refer to the start node of the webflow and
then
pass control to the .JSP that will display the information. Again, I'm
assuming that the information that is retrieved as part of the input
processor is being added to the pipeline session.
This is probably the best route for accomplishing the loading of the data
when the portlet is displayed.
Dave
"Mukul Sood" <[email protected]> wrote in message
news:3cc60322$[email protected]..
Hello All,
We have a workflow where we need to display some data in a portlet (listof catalogs
which user has access to).
This data should be visible when the portlet gets displayed.
We have an InputProcessor which retrieves this data.
The question is which event should fire the InputProcessor.
Could we link the PostLoginProcessor to this InputProcessor?
So that when a user successfully logs in, this workflow would get executedand the
portlet would show the list.
Is this the right approach or there is some other way?
Would greatly appreciate any help or suggestions.
Thnx.
Mukul
Similar Messages
-
Oracle AS control hangs after user login - AIX 5.3
Hi,
We are engaged with a customer who deploys OracleAS 10.1.2.0.2 on AIX 5.3. After installation, AS control hangs after user logins. This issue is addressed in release note and metalink doc365725.1. We followed the guide in metalink to do the modification and we can access AS control successfully after that. However, due to some other reasons, we restart the AIX, and after that AS control hangs again. This is quite strange. Does anyone meet with this symptom before? How can we resolve this issue?
Thanks in advance.
Sindhiya V.Thanks everyone for the response and help.
I completed the task yesterday with the permission method. However, I think I found the solution after completion. The trick lies at the oraInst.loc file. It lies at /etc directory for my case (AIX 5.3).
If you do a opatch lsinventory, it shows you the Central Inventory location and the location of orainst.loc. For my case, it is pointing to /oracle/DE1/920_64/inventory. Therefore, even though I am logging in as oraqa1 with all env and oracle settings correct, it still points to DE1 inventory.
I think modifying the Central inventory location in oraInst.loc will solve this problem. -
Install an application 2 minutes after user login
Hi,
i have a problem with the installation of an application. the installation starts after the user login. thats a problem because we have sometimes short timeouts after the login so it would be great if someone can help me to set the installation 1 or 2 minutes after the user login.
Is this possible? we use zenworks 6.5.20Originally Posted by ropi
Hi,
i have a problem with the installation of an application. the installation starts after the user login. thats a problem because we have sometimes short timeouts after the login so it would be great if someone can help me to set the installation 1 or 2 minutes after the user login.
Is this possible? we use zenworks 6.5.20
Maybe an option to use a sleep or delay command/exe, for example : RJL Software - Software - Utility - DelayExec
Call that in a force run application that runs a cmd where the delay then gets started, waiting the amount of time specified and then the installation gets kicked off?
If this works or not could also be dependent on rights needed etc... -
System freezes and restart after user login screen shows up
The interesting thing is thing is that the same thing happens on the bootcamp partition. Every time I turn on MBA mid 2012, when the login screen shows up, the computer freezes and than turns off. Same problem when I boot into bootcamp partition, the computer turns on, pass through windows logo and after the login screen shows, it turns off.
...forgot to mention that it's running osx 10.9
I figure out that I can log in with Sage Mode. Every time I log in with Safe Mode, the error popup message shows up saying about the error and its log. There is the log:
Anonymous UUID: 1975668F-0791-B095-A5DD-001905FAF4A7
Mon Nov 4 23:53:40 2013
panic(cpu 2 caller 0xffffff8002adc19e): Kernel trap at 0xffffff7f84801ee1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000080, CR3: 0x000000003e429024, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff800f7ebc04, RCX: 0x000000000000000e, RDX: 0x0000000000000000
RSP: 0xffffff8081d32fc0, RBP: 0xffffff8081d32fd0, RSI: 0xffffff801121a03a, RDI: 0x0000000000000000
R8: 0xffffff801121a602, R9: 0x0000000000000000, R10: 0xffffff8003070850, R11: 0xffffff8003089ce8
R12: 0xffffff800fae8644, R13: 0x0000000000000000, R14: 0x00000000000164a4, R15: 0xffffff800fae864c
RFL: 0x0000000000010286, RIP: 0xffffff7f84801ee1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000080, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8081d32c50 : 0xffffff8002a22f69
0xffffff8081d32cd0 : 0xffffff8002adc19e
0xffffff8081d32ea0 : 0xffffff8002af3606
0xffffff8081d32ec0 : 0xffffff7f84801ee1
0xffffff8081d32fd0 : 0xffffff7f847f6388
0xffffff8081d33070 : 0xffffff7f8480de2d
0xffffff8081d33130 : 0xffffff7f84811951
0xffffff8081d332b0 : 0xffffff7f847fb2b8
0xffffff8081d33390 : 0xffffff7f847f882f
0xffffff8081d333e0 : 0xffffff7f847e7422
0xffffff8081d33790 : 0xffffff8002be2abf
0xffffff8081d33af0 : 0xffffff8002be363d
0xffffff8081d33f20 : 0xffffff8002be31d9
0xffffff8081d33f60 : 0xffffff8002e3db67
0xffffff8081d33fb0 : 0xffffff8002af3af8
Kernel Extensions in backtrace:
com.paragon-software.filesystems.ntfs(78.1.10)[C00EE7CC-736F-3A48-AC68-33826B2C4CDF]@0xffffff7f847e4000->0xffffff7f8481dfff
BSD process name corresponding to current thread: mount_ufsd_NTFS
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000002800000
Kernel text base: 0xffffff8002a00000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 12684772054
last loaded kext at 12348392875: com.paragon-software.filesystems.ntfs 78.1.10 (addr 0xffffff7f847e4000, size 237568)
loaded kexts:
com.paragon-software.filesystems.ntfs 78.1.10
com.protech.NoSleep 1.3.3
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.2fc2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AGPM 100.14.11
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleIntelHD4000Graphics 8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelFramebufferCapri 8.1.8
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOSurface 91
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleThunderboltEDMSink 1.2.1
com.apple.driver.AppleThunderboltDPOutAdapter 2.5.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookAir5,2, BootROM MBA51.00EF.B02, 2 processors, Intel Core i5, 1.8 GHz, 4 GB, SMC 2.5f9
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463235363634485A2D3147364D3120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463235363634485A2D3147364D3120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD TS128E, 121,33 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
Thunderbolt Bus: MacBook Air, Apple Inc., 23.4
Any ideas?Problem solved... Figure out that in Safe Mode, the bootcamp partition is unmounted. So I thought that it could be the problem, when the login screen shows up, I guess the system was trying to mount the bootcamp partition and for some reason the computer was restarting. That's why the computer was turning off when I was trying to log in into Bootcamp partition also. So I wiped my bootcamp partition and resized the OSX partition. Now I can succesfully log in my user with out a problem
-
Need to trigger workflow after g/l document posted in FB50
Hi all
When a user posts a document in FB50 (G/L journal entry), I need it to trigger a workflow. I can find BTE's that come in to play before the document number is assigned, but I need it triggered after the document number is assigned. I tried BTE processes 1120 and 1140 but they're too early. I also looked at many function modules and user exits suggested by various SDN threads but nothing seems to be triggering.
I already have a workflow created using BO BKPF and can trigger it manually, but not through FB50. There's lots of info on BO FIPP, but I'm looking at posted documents, not parked documents. Tracing FB50 with SWELS/SWEL doesn't show anything.
Any help would be greatly appreciated.
RonHi Ronald,
If you are using ECC 6.0 try to look explicit enhancement, that is kernel BADI (key words: GET BADI and ENHANCEMENT). If there is none also then use implicit enhancement. Implicit enhancement is always available at the beginning and the end of Function Module, Routines, Program, Methods, etc.
Regards,
Lim... -
Default Dashboard not working after user login
Hi All,
We have one issue in 11.1.1.7.1 where PORTALPATH is not working for users. As a result, user lands on home page/recent page instead of the default dashboard after login.
I followed Doc ID 1576576.1 and Bug 17071629 - PORTALPATH SESSION VARIABLE IS INEFFECTIVE is reported. I applied patch 17071629 on top of 7.1. I have tried and verified that
· The URL we are using to login is “http://machinename:9704/analytics/saw.dll?bieehome&startPage=1”
· There is no Start Page set in user’s My Account other than Default.
· In Answers, the PORTALPATH session variable fetches correct dashboard path.
· I removed space in the dashboard name and tried with following path “/shared/Dashboard/_portal/PortalPathTest”. Also, assigned same default value to the session variable. I also tried “/Shared Folders/Dashboard/Dashboards/PortalPathTest” and “%2fshared%2fDashboard%2f_portal%2fPortalPathTest” but nothing works.
· lsinventory shows the patch got applied successfully.
One thing to notice -
1. Login url is: "http://machinename:9704/analytics/saw.dll?bieehome&startPage=1"
2. After login, browser URL gets changed to "http://http://scoreboard-sit.wellsfargo.com:9704/analytics/saw.dll?bieehomemachinename:9704/analytics/saw.dll?bieehome" and shows Home Page instead of default dashboard.
3. Now at this stage, if I append "&startPage=1" to the above step 2 URL in browser, it automatically navigates to correct default dashboard.
Also, This patch has fixed default dashboard in Act As. That means, If I act as a User, I land on correct default dashboard. But if same user actually logs in, s/he lands on home page.
I suspect if URL redirection after login is the actual issue. Please suggest if anyone has an idea.
Thanks,
AkshatI think this was the issue -
There was a java script error related to an undefined object, "accessMode" in logon.js. This is related to Accessibility or Section 508 (checked by Developer Tools of IE). We may have removed this code from the logon page which was causing the error. We had customized the page quite a bit previously. When I ignore the error and step through, I go to the correct portal path page. So we are going to replace the logon.js file with backup and hopefully it will fix the issue.
Cheers!
Akshat -
How to change the size of portal destop title after user login
hi,guys
got a question,I want to change the title of desktop,but I found out this title been limited by portal.the size length is 20.
in pf_desktop_instance table,the instance_title size is 20,so I changed it to 200,but still fail.so...does any guys handled this issue before.
I am using dvt tool of oracle weblogic portal.
thank you so much.
regards
arisI found the function from editTitle.js
titleSave: function(newValue, oldValue) {
var url = this.getUpdateUrl();
this.oldValue = oldValue;
var content = samples.dvt.Manager.getContentObject();
content.title = newValue;
alert(content.title);
dojo.xhrPost({
url: url,
mimetype: "text/html",
content: content,
load: dojo.hitch(this, this.titleSaveLoad),
error: dojo.hitch(this, this.titleSaveError)
so,is that means this content truncate by dvt java code?
if yes.where can i get dvt sourecode.thank you.
if no,then how to fix this one.
thank you. -
Run a powershell script on every user login/unlock
Hi everybody
I need to run a powershell (that opens an interactive dialog box) when every user log in or unlock session or remote connection to this server. In other words it have to be run every time a user enters a credential.
I tried task scheduler, but it didn't work properly. I tried triggers like "on workstation unlock" and "on connection to user session". I change user and group to administrators but still it runs under the author user (me) .
I found out user login event id is 4801 and 4778. can I use these event ids to run powershell code? Can I check raising the event ids through my code?
any other idea please?
Thanks in advanceIm not going to block a logon! I want to run a powershell code for every user login. assume like a message after user login. this kind of message for me is showing to me after other users login.
specifically this is a window from that I designed to execute on user login to show on the server and every user writes down in the text box the changes that is making on the server. this is a changes log solution to me. then I need to show every user to
work properly.
You can run a scheduled task at logon that can display a message. You can define this task in Group Policy.
You can also just use the standard user logon message which can also be defined in Group Policy.
You can execute a script task whenever an unlock event happens. This, too, can be defined in Group Policy.
¯\_(ツ)_/¯ -
Run NAC agent before user login - Win7?
Greetings all and thx in advance for any advice! Environment details - ISE 1.2. Patch 5 and cisco NAC agent 4.9.3.
I have all of the authen/authz policies working and functioning properly, however, I have run into an issue with the NAC agent running posture only after user login. This is causing some grief, mainly that users required login scripts can't run successfully until posture is compliant and the more permissive dACL is applied. I was hoping that posture would complete long before windows login was even an option for the user but for some reason I appear to require an interactive login to get the NAC agent to run posturing. Any thoughts or ideas on this? I tried the NAC agent installation with a couple of different user accounts on the windows hosts but without success, it will only posture once I have interactive login. I went pretty deep on the removal of the posture conditions to simply checking a single windows service but it didn't make any difference. Thanks for any advice!!
IAThanks for the reply Saurav, I should have clarified a design point. I am not doing any user authentication, only doing a machine authen. As I mentioned I can't seem to posture pre-user authentication even though I am not doing any user authentication.
IA -
2nd user login - limited software and files required
Hi, I need to create a second user login, preferably with access only to Word and Excel, and one folder of files. Is this possible or is all software accessible in a second login? Trying to avoid email, internet, skype, and get on with some intense and laborious work that has to be finished without further procrastination and distraction! I can no longer see the line between time spent working and time spent doing all the other things that have to be done. The problem with being self-employed. Thanks.
See http://support.apple.com/kb/TS1278 and http://support.apple.com/kb/TS1543 for starters.
-
Need to display last login details to the user after they login into portal
Hi All,
As per our requirement ,we need to display to the user,the following things:
1.Last login date and time will be maintained and displayed to the user after login.
2.Last unsuccessful login date and time will be maintained and displayed to the user after login.
3.No. of unsuccessful retrials before locking the user will be maintained and displayed to the user after login.
Therefore we are creating a webdynpro application wherein we are making use of the UME API and trying to retireve these information.
The methods i am using are:
IUserAccount.getLastFailedLogonDate() // To fetch the Last unsuccessful login date and time
IUserAccount.getFailedLogonAttempts() // No. of unsuccessful retrials
IUserAccount.getLastSuccessfulLogonDate() // Last login date and time
But the problem is IUserAccount.getLastSuccessfulLogonDate() is deprecated and i unable to use it,and also i am unable to get the value *IUserAccount.getFailedLogonAttempts() * I am only geting zero.Can anybody let me know alternative method to get this details.
Request you to guide me and help me to resolve this issue.
Thanks and Regards,
Nishita SalverHi,
I hope you are trying to show your login date from SharePoint List.
My suggestion is
1. by using ECMA Script ,retrieve values from that list and show the same in Master Page.
2. If you are not comfortable with ECMA, develop Visual Webpart and add the Visual Webpart in master page by using SharePoint Designer.
Please let me know ,if you need further guidance.
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh -
Why do I get sent to the User Login screen to enter my password after sleep?
Hi,
On OSX Lion, 10.7.4. I recently had to reinstall the OS on a new hard drive in my iMac and now have an issue with it that I never had before.
After prolonged periods of sleep (I haven't determined what the minimum length is before this will happen), when I come to wake the computer it shows me the User Login screen. Under my user icon is an orange checkmark, presumably to show that I am the user logged in. Otherwise it is exactly the same as the User Login screen one gets when the computer boots up. I select my user icon and enter my password and the computer unlocks.
I haven't got this set up anywhere, that I know of. I don't have the 'Security & Privacy - Require password for sleep and screen saver' option checked, never have. If I do turn that on just to check, it's a very different password screen, a little popup window in the centre of the dimmed screen.
How do I turn this feature off?
Thanks,
OwenSounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.
-
Is there a way to get a user login record after sleep?
I know that by opening terminal and typing in "last" (without the quote marks) that it will give me about a 3 week record of who has logged on my computer after shutdowns and restarts.
What I want to know is this:
a) Is there a way to get a user login record after the computer only goes to sleep?
b) is there a way to get the terminal to go back further than just 3 weeks or so for the shutdown/restart records?
Is there software that might do this???
Thanks in advance, this is important for me.bikinijack wrote:
Thanks, Dave: so this is what I type in the terminal? "ls -l /var/log/wtmp*" (without the quotes). And how do you unzip something that has been "gzipped"?
"man gzip" will give you the details for using gzip
My first question can be explained this way: To get into the computer when it is coming out of sleep you need to type in a password, then it opens to the desktop. Is there a way I can find out the times over the course of a day/week/month that this is being done? i.e., is there a log being made somewhere of when the computer is being opened and signed onto after being asleep?
When you wake the computer from a sleep, you are not logging in again so there will be
no record of the event as a "login"
My computer possibly could be used by a few other people that have access to my computer password (don't ask why) and I basically want to know if they are signing on when I am away from my desk.
You may want to look at /var/log/asl.log or /var/log/secure.log which contain details of
authentication attempts (which is what you are doing) and failures.
I am not asking why you have multiple people accessing your computer with your password --
but consider setting up separate username, it is a lot easier to manage and you will probably
not be asking questions like this one.
Dave -
User redirected to homepage after re-login to new authscheme
We define a new authentication scheme and assigned to a iView
displaying sensitive data. The new scheme has higher priority than the
default one, so users are required to re-login before accessing the
iView. Problem is after user re-login, he/she is redirected to portal
homepage, user has to navigate back to where he/she was to see the
iView. This creates a big usability problem.
We would like user to be able to see the iView after re-login, is this
possible?Hi Mike, definitely seems to be an IE security-related options setting on his computer. Have you tried adding the site in his trusted sites list? You may also have to uncheck the "require server verification" box. Also, might need to uncheck
the "enable protected mode." Last thing to try: check the "automatic logon with user and password."
cameron rautmann -
Create a user through the API and "Prompt user to change password after next login".
Using the Adobe Connect Interface, I can create a user and check the checkbox to "Prompt user to change password after next login".
Can I achieve the same result using the API? The principal-update action doesn't offer such an option and, as far as I can tell, there isn't another action to do so either.
Thank you.You can achieve it as part of your application functionality, but not as a configuration option on WLS.
Maybe you are looking for
-
Nano 6th generation won't be recognized by itunes
I've had the 6th generation nano for many months and up until a couple weeks ago, it was able to sync with itunes and be reconginzed. However, now when I connect it to my windows lenonova, it doesn't come up as a ipod but rather an external hard driv
-
My apple mac will not print safari adobe
I am trying to print a ticket - the printer says it can not print. It does not recongise the safari adobe.
-
Woke computer from Sleep: USB doesn't work
So, I woke my computer from sleep, and now all my USB ports are dead. I tried restarting, resetting the CMOS, removing the D-Bracket, which I had just installed (it didn't work either.). Any thoughts? EDIT: All ports get power, none get signal.
-
IMovie '13 - v.10.0 - exporting in SD (640 x 480)???
The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings t
-
I downloaded 2.01 and right away it went into backing up my 3GiPhone, it's been over an hour and its still backing up. Is anyone else having this problem?