Need to turn of the black boxes around signitures. How?

I always get black boxes around signitures when printing to PDF. How can I fix that?

How are you signing; with Adobe Reader? Then you better ask in the Adobe Reader forum.

Similar Messages

My ipad displays a black box around icons and isn't scrolling properly. I have turned it off then back on, which is the extent of my limited knowledge.

I was trying to get it to airprint to my supposedly supported HP eprint printer, but was having no luck. After trying to follow the online instructions on the HP website, it told me to turn it off wait 30 secs then turn it back on(along with the other devices but thats not my issue now) When I turned it back on it has a black box around all icons, I have to "double click" to get anything to open, and is not scrolling properly. I have turned it off and back on again, no change.

i am expereincing this problem....what was the solution??

I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong black box

Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong resizable black box sitting on top of anything. The content changes depending on the actions I take. Right now it says, "You are currently on a close button. To click this button, which closes the current window, press Control-Option-Space." Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there. I've tried closing all my applications and restarting and I also reset the PRAM. It won't go away. It's probably something simple, but I don't know how to get rid of it. Any suggestions are welcome.
Thanks,
Janet

Thanks so much. I saw this on "desktop strangeness" immediately after I posted and tried to retract my question. It worked perfectly. I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer. I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up. Still looking for the resolution to this.

IPhone 4 has a black box around an app when you touch it. It won't allow you to swipe to the bottom of the settings feature to reset factory settings

Please help with this. There is a box in the upper right corner that has 3 circles inside it. It is gray and white until you touch it then it gets black. I can't swipe the screen in any direction. When I touch an app it gets a black box around it, and I have to Double tap in a different are to open the app. Suggestions?

Tripple click the home button to turn off switch control. Then:
Settings > General > Accessibility > Switch Contol > OFF

I'm suddenly seeing 2-point black boxes around any desktop icon I highlight, and around various elements in any window I'm working in. I have a G5 PPC iMac running 10.4.11. Neither restarting the machine nor running Mac Warrior has helped.

I'm suddenly seeing 2-point black boxes around any desktop icon I highlight, and around various elements in any window I'm working in. I have a G5 PPC iMac running 10.4.11. Neither restarting the machine nor running Mac Warrior has helped.

Thanks! I often inadvertently turn on the voiceover when I use the wrong keys to send an element to the back in Quark. Funny, I turned off the voiceover on my own, but never noticed that the black boxes had gone away until I saw your post.

I have these black boxes around all the images i add. why are they there and how do i get rid of them?

i have black boxes around all the images i bring into pages. why are they there and how can i get rid of them?

Pages rememebers the last setting you used on images.
So if you had a border on the last image the next one you bring in will have one too.
To change that select:
Inspector > Graphic > Stroke > None
Spend a little time exploring the menus and particularly the Toolbar and Inspectors whcih are in reasonably logical progression from big things down to smaller details and clearly labeled.
It is also possible that you have show Layout on which outlines objects on th screen so you can see what's what. To change that:
Menu > View > Hide Layout
Peter

Can Someone Open the Black Box

01. I think I understand RSL usage for the Flex framework and
I think I like the fact that its implementation, for all practical
purposes, remains a Black Box. I can't see inside, but don't need
to since it just works as described in the many Googleable postings
available.
02. Now, however, we migrate to AIR and I challenge you to
find a solid description of the expected behavior in the AIR
environment. [Yes, there is one jira entry, in which some
developer, acknowledging an error in the air-config file adds the
cryptic comment -- "We don't expect most AIR apps to use these
RSLs.".
03. Now someone needs to open that black box so we can
determine how to properly take advantage of the client-side cache
for AIR applications. For that matter, it would be nice to see
concise information concerning the use of Modules in AIR
applications, but I will be so happy if I can just get the
framework modules to work properly.
04. Here is observed behavior from outside the Black Box.
A. Write/test/deploy a Flex Application compiled for use of
dynamic framework RSLs. Put the framework.swz file where the
webserver needs it to be -- and add the framework.swc version just
for the heck of it.
B. It works beautifully, and you can go look in the
client-side cache to see that the files were downloaded when
required -- just as advertized.
C. Write/test/deploy an AIR Application that uses SWFLoader
to launch on-demand exactly the same Application.swf file that was
run above.
D. It is much harder to trace, but the fact that the Module
runs correctly inside AIR is proof that AIR knew how to check the
client-side cache to resolve the links to the framework code, just
perfectly. But, if you are a doubting Tomas, rerun this AIR test
after you delete the framework.swz file from the the client-side
cache and wait for your #2032 error -- it will pop up pretty
quickly.
So, other than by asking the client to run a Flex application
in order to force-download the required framework, what is the
design pattern, best-practice or other direction concerning the
correct way for a pure AIR application to take advantage of
client-side caching of the ever-expanding framework
codebase?

Hello Maureen1842,
It sounds like you are able to see the Slide to Unlock screen but there is an outline around Slide to Unlock and it will not slide. From what you describe I'm thinking that Voice Over is enabled on the phone. Try doubletapping Slide to Unlock, that should get you to your home screen. Then go to your settings and disable Voice Over.
Turn VoiceOver on or off. Go to Settings > General > Accessibility > VoiceOver
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph3e2e33be
Thank you for using Apple Support Communities.
Take care,
Sterling

I have these black boxes around my active pages, but I have voice-over disabled, any help?

I have these black boxes around my active pages, I looked online for pointers but they all pointed to me disabling my voice-over in the universal access option on system preferences. My voice-over wasn't enabled and the boxes are still here, any help?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

Strange Black Box around every prompt I am given...

This is very strange. I started up iChat for the first time on MBP and am now having a very strange occurance. At every prompt there is a strange black box around it. For example, right now there is a black box around the back arrow in my safari browser. When I open the finder there is a black box around my hard drive. I just opened system preferences and there is a black box around the back arrow in system preferences box...
Can anybody help me?
MacBook Pro 2GHz, PowerBook G4, PowerMac G4 Mac OS X (10.4.5)

heheh ya it's funny when you look at the people who just hear the mac talking and they don't know wat to do.. but ya.. universal access is only for that.. for the F8 key is exposè, which is nothing related to Universal Access at all, so you can keep Universal Access options off and exposè will still running
Anyway, you can configure both from the System Preferences.

How can I stop the black box appearing round a movie?

So I've created a PDF with quicktime movies embedded in it on indesign, and I've taken the black outline off and have the movie automatically playing when you open the page. The problem is when it plays another black box appears round the movie and you have to click off it to make it disappear - it looks unprofessional and if you're in full screen mode this makes it turn to the next page, and we don't want that, do we.
Does anyone know how to get rid of this black box so that it stays without a border when it's playing? I guess it happens because the movie is selected, but I can't seem to find anywhere in the edit movie dialogue box that says anything about it.
Thanks.

Thanks Steve, we'll look into buying Acrobat X because it would look so much better.
One question though - If I was to sort out the settings on Acrobat X, would the black box still appear when viewed on Acrobat 8?

Black box around window screenshots?

Hi guys,
I'm using 10.6.2 SL and whenever I take a screenshot of a window with Shift Apple 4 Space, I get this ugly black box around the window.
Here is an example.
Before, the screenshot would have a nice shadow. It used to look like this.
Was this intentional? Or is this a glitch?
Thanks
Sohrob

That behavior's abnormal. Start with a search for *screenshot black border* and peruse the hits. If no luck, create a new admin user account, log into it, and see if the problem persists.

Haunted by the Black Box of Death

Ok, I'm having the most confusing annoying issue trying to install Tiger on one of the machines @ work. The machine is a mid-generations gigabit model G4 400 single processor with plenty of ram, and current firmware. Yet for some reason, as soon as i restart onto the OSX disc to install, it gets as far as the "choose a language" screen (If that far at all) and then drops the gray curtain with the black box in the middle w/ the power button silho. and the "You need to restart your mac..." message in 4 languages.
I've installed Tiger on dumber machines in this office, and none of them were giving me this much grief. This machine doesnt seem to want to get past OS 9.2, and unfortunately I do have to leave that inplace, as we still use 2 or 3 classic apps.
If anyone can tell me how to get past this screen, or even just what may be wrong Id love to hear it.
Thanks,
-J

Hello,
First, make sure that you have the latest Firmware updates installed. Refer to the article at:
http://docs.info.apple.com/article.html?artnum=86117
This will list all the available firmware updates for each machine.
If you already have the latest firmware update installed, and are still having this problem, then I would suspect bad memory first.
Try removing any expanded memory you have installed (leaving the factory memory installed) and see what happens.
There were a lot of marginal memory modules sold before OS X was released.
Many of these modules would work perfectly fine, and then fail completely once you installed (or tried to install) OS X 10.0
This was a huge issue back then. Many people discovered that their memory modules were just slightly out of spec, and needed to be replaced with proper modules that were produced exactly to spec.
Perhaps this is what is going on with your system.
Since you have been using 9.2 on that machine, your expanded memory (if you have any) may be slightly out of spec, but was not noticed by OS 9.2.
Hope this helps.

I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

Welcome to iMovie Discussions.
See my 2nd reply to 'getzcreative', here.

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

Need to turn of the black boxes around signitures. How?

Similar Messages

Maybe you are looking for