Need updated drivers for OJ Pro 8600 Plus Win 8.1 64 bit

My 8600 constantly loses it's connection to network and needs to be shut off and restarted to correct.  I noticed my drivers are out of date, but when I try to download updated drivers, I am prompted for a password.  My Forum password doesn't work, or the one I wrote down on origuibnal installation.

Hi,
Please download directly the following files (dated Aug-17-2014) and install to your computer, much faster this way and no need to enter password:
    http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS

    Need sound drivers for a Pavillion dv8309us running Windows 7 Enterprise 64-Bit OS. I'm getting "no audio output device is installed" error after trying various different drivers. Sometimes the driver will install and I'll reboot, but to no avail I end up with the same error and a red X over the speaker in the system tray. I've tried Realtek drivers and Conexant drivers from HP. When I run Windows upgrade advisor it recognizes the problem, but Microsoft doesn't offer a compatible driver. At this point I'm very desperate considering everything else works fine and I don't want to go back too XP Media Center. If there is anything you can do to help, it would be greatly appreciated. Thank you

    I guess this one isn't even 64 bit but it is the one on HP's site:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46818-1&cc=us&dlc=en&lc=en&...
    I never tried to force a driver but I think it can be done.  I seeing that in some threads.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • I need updated drivers for Intel HD Graphics 4000

    Hi,
    this is the laptop:
    SATELLITE L50-A-170
    PSKJNE-03L00MIT
    Microsoft Windows 8.1  6.3.9600 (64bit)
    I need the last drivers for Intel HD Graphics 4000, 64-bit version 15.33.32.64.4061 (10.18.10.4061).
    I downloaded the driver but I can't install because:
    "The driver being installed is not valid for this computer. Please obtain the appropriate driver from the computer manufacturer Setup will exit"
    ...but in your support page the last version is 10.18.10.3308.
    What can I do?
    Solved!
    Go to Solution.
    Attachments:
    dati laptop.txt ‏10 KB

    Try this workaround.
       How to Manually Install a Driver in Microsoft Windows 8* or Windows 8.1*
    -Jerry

  • Can't Install Drivers for Officejet Pro 8600

    I have a fresh install of Windows 7 Enterprise, everything installs and works perfectly except for this printer!
    I keep getting this error message!
    [Window Title]
    C:\Users\Annette\Downloads\OJ8600_1315-1(1).exe
    [Content]
    The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
    [OK]
    The rest of my PCs in the network use Windows 8 and Windows 7 Home Edition, all able to install the driver without issues! Please help!

    Hello @gicanktrl  and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into driver errors.  I would like to help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Does lion need updated drivers for M-Audi midi interface?

    I'm using an M-Audio USB Midi interface with garageband (v 5.1) under Mac OS X 10.6.8. Could anyone confirm whether the snow leopard driver for this will continue to work with Lion?

    No it will not. However M audio has posted a 10.7 compatible driver for their products on their forum. It works flawlessly with Lion, my MBP 13" 2011 w/8GB memory.
    Follow this link:
    http://forums.m-audio.com/showthread.php?29058-Download-Mac-OSX-Firewire-Series- Beta-Driver

  • Re: I need updated drivers for Intel HD Graphics 4000

    hello hello iam having problem here is there anybody can help me i have toshiba satellite p845-s4200 the cpu temprature is 90%and i am not using anything every time i open my computer without using any application the pc health moniture say
    the cpu temprature 90% and it never dereace  after some days someone told me to recover my computer using recovery wizard and i did but nothing is it just like the way iy was 
    help help
    what should i do 
    jerry i think you can help me and i will appreciate it
    Attachments:
    Capturer.PNG ‏119 KB

    someone told me to recover my computer using recovery wizard and i did but nothing is it just like the way iy was
    If you have restored the hard disk to its original out-of-the-box contents and the problem continues, it is not due to software on the hard drive. That includes drivers, of course..
    -Jerry

  • Im need new drivers for AMD RADEON HD 6970M. Windows 7 64 bit.

    Hello.
    I have Imac 27 Jule2011 with AMD Radeon HD6970M.
    Im using Windows 7 64 bit.
    But new games require newest version of driver for videocard.
    I tried install ATI CATALYST and install new video drivers, but it is impossible, cuz i have apple architecture of hardware.
    Last version of bootcamp(5.0.33) have old version of driver (12.8).
    I have to install 13.9 or later.
    Please, help me!

    Visit the Boot Camp forum, that is where the Boot Camp and MS Windows gurus will be, this forum is just for general iMac use where most people only use OS X.
    Good luck.

  • Missing HP Utility (Officejet Pro 8600 Plus); need to reinstall - cannot uninstall printer software

    I had to wipe my iMac and resinstall IOS Mavericks (10.9.5).  Printer (Officejet Pro 8600 Plus, 9N11g) is working, but will no longer scan (double-clicking icon results in "original item cannot be found") and the HP utility icon on dock is missing, replaced with a "?."  I located directions to uninstall printer software so I can reinstall... but there is no longer any HP folder or "HP Uninstaller" on my Mac HD.  Neither is there an HP folder within Library/Printers folders.  Spotlight search shows no HP or Hewlett-Packard folders on my hard drive.
    I have downloaded an "HPPPrinterDrivers3.0.dmg" and "HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg," one of which I'm hoping will contain updated software/drivers to reinstall the printer and hopefully the HP Utility so I can regain scanning function, but I cannot figure out how to remove the current printer software, and I do not know if those are the currect files to use.  I understand just deleting the printer will not suffice.  
    Can anyone provide step-by-step instructions on how to remove the software as well as installation (since I am unclear if I have the correct dmg files)?  Thank you.
    This question was solved.
    View Solution.

    Hi,
    First I would suggest repairing the disk permissions, then try reinstalling the HP Software.
    Follow the steps below to repair the disk permissions:
    1. Open the the Applications folder.
    2. Go to the Utilities folder.
    3. Double-click on Disk Utility.
    4. Select the hard drive containing the boot volume.
    5. Go to the First Aid tab and select Repair Disk Permissions.
    Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
    Once you are done, run the HP-Injket-SW-OSX-Mavericks_v12.34.37.dmg file and follow the steps on screen, be sure to select the HP Scan option while installing to get full functionality of the software.
    Please try the steps above and let me know the results,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP officejet pro 8600 plus need to reset, but no screen access due to head error

    hi,
    I had some HP's 8600 but one of them it is dead as printer and it was replaced.
    I need to use it only as scanner (no printing since its problem are the printing heads). The problem I cannot access to the menu through the screen since it is stock with the message mentioning the fail on printing head. The next option it is to watch a demo about heads.
    Im trying to access in order to fix a new static ip for the scan.
    Is there a way to reset so the printing gets an dhcp ip add? So far the scanner works fine through USB connection.
    Thanks in advance

    Hello @Rodrigo_cl,
    Welcome to the HP Support Forums!
    I understand that your HP Officejet Pro 8600 Plus e-All-in-One Printer has encountered a hardware Printhead failure and is not allowing you to scan using a static IP because of this. I would like to assist you today with resolving this issue.
    Now, due to the error on the front panel of the printer, you will not be able to perform any resets on your machine. But, if your printer is currently on the network with an automatic IP we can utilize the embedded web server to configure a static IP.
    Is your printer currently on your wireless or wired network?
    Once I know if your printer is currently on the network, I can guide you towards configuring the static IP through the computer. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Officejet Pro 8600 Plus cannot print after OS 10.10 SW update

    My Officejet Pro 8600 Plus was working just fine with OS 10.9.  I got an email from HP that there was updated software for OS 10.10, so I  dowloaded & installed it, and now I get gibberish when I try to print anything -- a web page, email, Word document -- similar results for all.
    For example, for a Fitbit update email, the title "Weekly Stats" was printed, my name was printed, some images were partially printed, and all the remaining lines/descriptions were gibberish.  Maybe 20% of the characters were printed, the rest was blank space.  Looked more like Morse code than text.
    I reinstalled 3 times with the same results.  I installed the update via the app store, same results.  I used Time Machine to reset to yesterday, no impact, same results.  I can scan just fine.  Have not tested faxing.
    My HP Laserjet Pro M401dne was also updated and it still prints fine.
    Can I get and reinstall the OS 10.9 SW?
    Thanks in advancxe for any assistance.
    Kent

    Hi,
    Please check the following link first:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
    and the following link shows how to install new patch:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Directions for adding a Hp office jet pro 8600 plus to a windows 7 computer

    We are trying to add an HP Officejet Pro 8600 Plus to a HP windows 7 desktop computer. It is working on the HP windows 8 in the same office,  but the  windows 7 set up stalls at print a test. When we troubleshoot the error does not fix. Can you please give me instructions to get this correctly set up and working as a printer/fax/scan on my HP Windows 7 computer? 

    Hello dawnp,
    Welcome to the HP Forums.
    I see that you are having an issue with installing the printer on to your Windows 7 computer.
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it failed as well as any error codes you may see.
    Write me back when you have time and I will be happy to help.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Pro 8600 Plus Scanning for A4 Paper on Mac

    Pro 8600 Plus Scanning for A4 Paper on Mac
    I am unable to scan A4 paper on my 8600 device using the HP Scan Application. I validated I am using the latest software/firmware.  
    I can print to A4 paper just can't scan.  Any help would be appreciated.
    This question was solved.
    View Solution.

    Hi TLC20,
    Thank you for your reply! I was wondering if you are able to copy with A4 paper.
    In the meantime, please try the following:
    Load the A4 paper on the ADF face up.
    On the Mac, click on the Apple Icon, click on System Preferences, Click on Print & Scan, Select your printer in the list, click on Scan tab, then click on Open Scanner.
    Make sure that Document Feeder is selected not Flatbed. Then change the paper size to A4.
    Hope this helps you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

    i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

    Doug...
    If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
    After it loads, Command + F to find information regarding the drivers.

  • HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

    I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s.  There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale.  The print options box is the default box that was originally develped in the 1990s - no kidding.  I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned.  I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk.  I can not believe HP is even selling this thing with these types of drivers.  I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit.  Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
    What gives?  Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing.  I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7.  That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
    Has anyone else experienced this type of garbage?

    I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
    I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

  • Officejet Pro 8600 Plus won't print or scan wirelessly using Mac OS 10.

    Mac OS 10.9
    Wireless
    My printer was working fine until today.  Then when I used the control panel to scan a page I went through the steps and got to scanning and got the message I needed to enable "Scan to Computer" in the HP Utility.  I went there and it was unchecked.  Seems I had this problem every time I did a new scan job in the past.  It wouldn't retain than check.  So I checked it and after awhile I got the message "Communication Error" and to check my connections and if that didn't work restart my computer and printer.  I did that and also restarted the router but it didn't help.
    Then I tried printing from Word, which has always worked but it didn't this time.  The printer icon on the right of the dock came up, bounced a few times then disappeared with nothing happening on the printer.
    So I deleted and reinstalled the printer.  No help.  I downloaded and installed HP software and firmware updates.  No help.  I went through wireless setup.  No help
    BTW, all along I got good "Wireless Network Test" results.  I says it's connected but nothing happens when I try any functions of the printer.
    If I can find a USB cable I will try to see if wired works.
    Any suggestions would be appreciated. 

    Hey @neoflyer,
    I would like to assist you today with resolving the wireless printing and scanning issues you're experiencing on your HP Officejet Pro 8600 Plus e-All-in-One Printer on your Mac OS X 10.9 Operating System. You mentioned that you have powercycled the devices, reran the wireless setup, and uninstalled and reinstalled the software and drivers to no avail. I'm going to suggest a few additional troubleshooting steps to verify if this is a computer issue or a network issue.
    Step 1: Gather the IP and Open the EWS:
    1. On the screen of your printer select the wireless button:
    2. Under the Wireless information you should see your IP address
    3. Open up your internet browser on your Mac computer and in the website address bar just type in your IP address. Please do not include www.
    4. After you enter your IP address in the website bar go to that website
    5. If the website for your printer opens than that proves with 100% certainty that your printer and computer are 'talking' to each other on your wireless network. If the website fails to open than you have a network communication issue with your router.
    If the website fails to open please powercycle your network again:
    How to Properly Powercycle a Network:
    First, unplug the power cable to your Router
    Once your Router is unplugged, turn off your printer
    Next, shut down your computer
    After 30 seconds to 1 minutes, plug your Router back in
    Next, turn on your printer
    Turn on the computer
    After a few moments check on your computer and ensure that the internet is working. Once it is, hit the wireless button again on the printer to see if your printer got a new IP address. Using the IP address enter it in the address bar of your internet browser and now see if the website for the printer opens.
    If the website for the printer opens successfully please follow the steps below:
    Step 1: Uninstall Drivers and Software:
    From the computer desktop, double-click the Macintosh HD, and then click Applications.
    Click the Hewlett-Packard folder.
    Double-click the HP Uninstaller, and then click Continue.
    Select the product to uninstall, and then click Uninstall.
    When prompted, type the Administrator name and Password, and then click OK.
    From the Macintosh HD menu, click Users.
    Click the correct user name.
    Click Library.
    Click Preferences.
    Click and hold the cursor on the first file that starts with "HP," and then drag the file to the Trash icon on the taskbar. Complete this step for each file that starts with "HP."
    Close out of Preferences.
    Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    1. Please click the following link to download the appropriate Mac OS X 10.9 drivers for your printer: Mac: HP Officejet Pro 8600 series Full Feature Software and Drivers
    2. Once downloaded, run through the step by step screens to reinstall your network printer
    3. Once the printer is reinstalled, attempt a print and a scan!
    Please let me know if these steps resolved your issue. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for